arXiv:2609.29300
A low-temperature entropy source for on-chip true random number generation: universal robustness beyond device quality
Y. Q. Chai, M. Y. Wang, X. N. Feng, L. F. Wei
Abstract
True random number generation is a critical capability for fault-tolerant quantum computing at millikelvin temperatures. Yet existing Josephson-junction-based TRNGs all rest on a widely accepted but untested assumption: that reliable entropy extraction requires precisely controlled device parameters. Here we show that this assumption does not always hold. We demonstrate a counterintuitive finding: a single current-biased Josephson junction, regardless of its parameter quality, can serve as a cryptographic-grade true random number generator. To establish the universality of this conclusion, we deliberately selected the most extremely deviated devices from fabrication, with critical currents three orders of magnitude away from theoretical predictions and $I_cR$ products an order of magnitude above conventional values, as the ultimate stress test. Even under these extreme conditions, the raw Shannon entropy reaches 0.9981~bit (99.8\% of the theoretical maximum), with a min-entropy of 0.9271~bit. Using a square-wave pulsed-bias scheme, we tune the switching probability to $P\approx0.5$. After SHA-256 post-processing, the bitstreams pass all 15 NIST SP 800-22 tests under a conservative $m=3$ criterion that is more demanding than the standard recommendation, and this certification holds across the entire 100-700~mK operating window of a dilution refrigerator.
AI Summary
The paper asks whether fabrication-induced parameter deviations prevent current-biased Josephson junctions from serving as millikelvin random-number sources. It studies stochastic switching in an Al/AlOx/Al junction using square-wave current pulses, with pulse amplitude adjusted to make the switching probability approximately $1/2$. The characterized device has $I_c=0.672\,\mathrm{mA}$ and $R=91.5\,\Omega$, compared with a quoted theoretical critical current of $3.09\,\mu\mathrm{A}$. Switching is interpreted through thermal activation and macroscopic quantum tunneling in the RCSJ model. Two-hour bitstreams were collected at seven temperatures from $100$ to $700\,\mathrm{mK}$ and repetition rates of $0.5$ and $1\,\mathrm{kHz}$. At $100\,\mathrm{mK}$ and $1\,\mathrm{kHz}$, the measured single-bit Shannon entropy is $0.9981$ bits and marginal min-entropy is $0.9271$ bits, with lag-one autocorrelation $0.3195$. Reducing the repetition rate to $0.5\,\mathrm{kHz}$ lowers that correlation to $0.0764$. These entropy estimates describe single-bit distributions, rather than establishing an entropy rate for the correlated source. Across operating conditions, the reported single-bit Shannon entropy ranges from $0.8618$ to approximately one bit. Post-processing hashes each 512-bit block to 256 bits using SHA-256. The resulting streams pass applicable NIST SP 800-22 tests; the tabulated $1\,\mathrm{kHz}$ results cover all seven temperatures. The paper identifies the experiment as proof of principle and acknowledges that testing three million-bit sequences is insufficient for the recommended $P$-value uniformity assessment. Readout uses room-temperature electronics; faster generation and circuit-level integration remain proposed developments, rather than demonstrated capabilities.
Central claim may not hold: The claimed robustness regardless of device quality is not established by the explicitly characterized device and temperature-dependent measurements, without a documented device population or corresponding general argument. The reported near-maximal entropies are marginal single-bit quantities and do not bound the correlated source's block min-entropy sufficiently to justify cryptographically secure 512-to-256-bit extraction. Post-hash NIST test passes do not certify physical entropy or cryptographic security, three test sequences do not provide stronger statistical validation than the recommended larger sample, and the 0.5 kHz datasets cannot supply the stated three million-bit extracted sequences. The reported critical-current discrepancy is a factor of approximately 217.5, or 2.34 orders of magnitude, rather than three orders of magnitude. The paper's barrier formula and reported currents predict a thermal activation exponent of approximately −102,000 at 100 mK, incompatible with its observed millisecond switching and claimed dominant thermal-escape explanation.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 9 pages, 8figures