Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.25593

Resonant multi-harmonic acousto-optics for programmable frequency control of visible light in a CMOS platform

Jacob M. Freedman, Matthew J. Storey, Daniel Dominguez, Andrew Leenheer, Nils T. Otterstrom, Matt Eichenfield

physics.opticsquant-phSubmitted Sep 22, 2026• Announced Sep 23, 2026
arXivHTMLPDF

Abstract

Scaling quantum control for atoms, ions, and solid-state emitters requires gigahertz-frequency spectral control of high-power visible light in a volume-manufacturable platform. Silicon nitride photonics provides high power handling and CMOS-foundry compatibility but has no intrinsic mechanism for high-speed modulation. Integration with piezoelectric materials enables acousto-optic phase modulation, and mechanical resonant enhancement has made it efficient at gigahertz frequencies. However, a single resonance restricts the modulation waveform to a single tone, imposing Bessel-function sideband amplitudes and limiting frequency-shifting efficiency to 33.9%. Here we engineer a silicon nitride acousto-optic microstructure to support harmonically spaced resonances at 1.14 GHz and 2.28 GHz, each strongly optomechanically coupled to a 730 nm guided optical mode, so that tailored non-sinusoidal modulation waveforms can be resonantly synthesized. By piezoelectrically controlling the two mechanical amplitudes and their relative phase, we demonstrate 50% conversion to one sideband (1.5x the single-tone theoretical maximum), a flat seven-line comb, and a frequency shift with 60 dB carrier and 53 dB image suppression - to our knowledge the highest reported for an integrated modulator. The devices are fabricated in a 200 mm CMOS foundry, and we measure 91.7% yield without post-fabrication tuning across 36 devices from three wafers. We also show how the technique can be straightforwardly scaled to three or more harmonics. This result overcomes the trade-off between resonant enhancement and spectral programmability, with important consequences including improved single-qubit gate efficiency for hyperfine qubits.

AI Summary

Resonantly enhanced acousto-optic phase modulators offer efficient GHz control of visible light, but a single mechanical resonance restricts modulation to sinusoidal waveforms. This paper investigates whether harmonically aligned mechanical resonances can retain resonant enhancement while enabling programmable optical spectra in a CMOS-compatible platform. A silicon-nitride–aluminium-nitride microstructure supports optomechanically coupled resonances near $1.14$ and $2.28\,\mathrm{GHz}$ for guided light at $730\,\mathrm{nm}$. Independently controlling the two drive amplitudes and their relative phase produces measured conversion of $50\%$ into one sideband, compared with the single-tone maximum of $33.9\%$, and a flat seven-line comb. A separate frequency-shifting operating point gives $40\%$ conversion with $60\,\mathrm{dB}$ carrier suppression and $53\,\mathrm{dB}$ image suppression. Devices are fabricated in a $200\,\mathrm{mm}$ CMOS foundry, with reported untuned yield of $91.7\%$ across 36 devices from three wafers. Finite-element modeling identifies suitable mechanical modes; Bessel-function expansions describe spectral synthesis, and optical heterodyne measurements characterize sideband powers. Phase-sweep fits identify mechanical second-harmonic generation that modifies the programmed response. Numerical extensions predict $66.2\%$ maximum sideband conversion with three harmonics and $80.8\%$ with six; these are not experimental demonstrations. Operation remains constrained by resonance alignment, available drive voltage, and mechanical bandwidth. Approximately $100\,\mathrm{ns}$ switching times are inferred from oscillator fits rather than directly measured. Resonance splitting is attributed to periodic supports but requires further modeling. Improved qubit-driving efficiency is calculated using dispersive phase-to-amplitude conversion, not demonstrated with qubits.

No sign of AI-generated text

Error found: The supplied text does not document the abstract's separate 50% conversion measurement, although that value is compatible with the stated theoretical limit and the distinct 40% suppression-optimized operating point. The supplied text contains no measured spectrum or flatness metric substantiating the abstract's flat seven-line comb. The reported 60 dB carrier and 53 dB image suppression lack corresponding measurement and detection-floor documentation in the supplied text. The reported 91.7% yield is arithmetically consistent with 33 of 36 devices, but the supplied device statistics do not specify the passing devices or the applied acceptance criterion.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Related papers

CMOS-Fabricated Piezo-Optomechanical Platform for Hyperfine Qubit Control

Jacob M. Freedman, Andrew Jay Leenheer, Neshat Sadafi +3 more

We describe all-CMOS-fabricated, piezo-optomechanical, acousto-optic photonic integrated circuits that convert high-power continuous-wave visible laser light to gigahertz-frequency amplitude-modulated signals that can provide gate operations for trapped-atom and ion qubits.

Conference on Lasers and Electro-Optics•Jan 1, 2026•0 citations

Ultra-low loss piezo-optomechanical low-confinement silicon nitride platform for visible wavelength quantum photonic circuits

Mayank Mishra, Gwangho Choi, Wenhua He +7 more

Realizing photonic quantum computing at scale requires integrated circuits that combine ultra-low loss with fast, low-power, low-hysteresis, and low-crosstalk reconfiguration. These requirements are particularly challenging at visible wavelengths, where many quantum resource-state generators, including single-photon sources and quantum memories, naturally operate. Low-confinement silicon nitride waveguides offer the requisite loss performance, but conventional thermo-optic modulators dissipate significant static power, driving thermal crosstalk and precluding cryogenic operation. Visible-wavelength piezo-optomechanical circuits avoid these drawbacks, but existing demonstrations rely either on high-confinement waveguides with propagation losses of 35-100 dB/m, or on low-confinement platforms using foundry-incompatible PZT. Here we combine piezo-optomechanical actuation with a CMOS-foundry-fabricated, low-confinement silicon nitride platform, achieving 2.6 dB/m propagation loss at 780 nm, megahertz-scale modulation bandwidth, a half-wave voltage-length product of 2.8 Vm, and negligible hysteresis. We demonstrate reconfigurable Mach-Zehnder interferometers with 0.63 dB loss per spiral phase shifter, enabling deep, actively reconfigurable visible-wavelength quantum photonic circuits.

physics.opticsCross-listedarXiv:2603.02584•Mar 4, 2026

An integrated photonics platform for high-speed, ultrahigh-extinction, many-channel quantum control

Mengdi Zhao, Manuj Singh, Anshuman Singh +10 more

High-fidelity control of the thousands to millions of programmable qubits needed for utility-scale quantum computers presents a formidable challenge for control systems. In leading atomic systems, control is optical: UV-NIR beams must be fanned out over numerous spatial channels and modulated to implement gates. While photonic integrated circuits (PICs) offer a potentially scalable solution, they also need to simultaneously feature high-speed and high-extinction modulation, strong inter-channel isolation, and broad wavelength compatibility. Here, we introduce and experimentally validate a foundry-fabricated PIC platform that overcomes these limitations. Designed for Rubidium-87 neutral atom quantum computers, our 8-channel PICs, fabricated on a 200-mm wafer process, demonstrate an advanced combination of performance metrics. At the 795 nm single-qubit gate wavelength, we achieve a mean extinction ratio (ER) of 71.4 $\pm$ 1.1 dB, nearest-neighbor on-chip crosstalk of -68.0 $\pm$ 1.0 dB, and -50.8 $\pm$ 0.2 dB after parallel beam delivery in free-space. This high-performance operation extends to the 420 nm and 1013 nm wavelengths for two-qubit Rydberg gates, showing ERs of 42.4 dB (detector-limited) and 61.5 dB, respectively. The devices exhibit 10-90% rise times of 26 $\pm$ 7 ns, achieve dynamic switching to -60 dB levels within microsecond timescales, and show pulse stability errors at the $10^{-3}$ level. This work establishes a scalable platform for developing advanced large-scale optical control required in fault-tolerant quantum computers and other precision technologies.

arXiv:2508.09920•Aug 13, 2025•14 citations

An integrated photonic engine for programmable atomic control

Ian Christen, Thomas Propson, Madison Sutula +12 more

Solutions for scalable, high-performance optical control are important for the development of scaled atom-based quantum technologies. Modulation of many individual optical beams is central to applying arbitrary gate and control sequences on arrays of atoms or atom-like systems. At telecom wavelengths, miniaturization of optical components via photonic integration has pushed the scale and performance of classical and quantum optics far beyond the limitations of bulk devices. However, material platforms for high-speed telecom integrated photonics lack transparency at the short wavelengths required by leading atomic systems. Here, we propose and implement a scalable and reconfigurable photonic control architecture using integrated, visible-light modulators based on thin-film lithium niobate. We combine this system with techniques in free-space optics and holography to demonstrate multi-channel, gigahertz-rate visible beamshaping. When applied to silicon-vacancy artificial atoms, our system enables the spatial and spectral addressing of a dynamically-selectable set of these stochastically-positioned point emitters.

arXiv:2208.06732•Nature Communications•Jan 2, 2025•53 citations

High-brightness broadband quantum frequency combs from silicon microrings

Yue Qin, Chester Shu, Hon Ki Tsang

Quantum frequency combs (QFCs) are essential to quantum photonic systems, enabling high dimensional entanglement in both temporal and frequency domains. Silicon photonics offers a promising platform for scalable and monolithic quantum photonic integrated circuits. However, its performance in QFC generation has been hindered by nonlinear losses and restricted phase-matching bandwidth. To overcome these challenges, we introduce a novel design strategy that combines high-order spatial mode engineering with an optimized free-carrier loss suppression structure in a silicon micro-ring resonator. This approach enables a broadband QFC spanning 150 nm, along with a high single pair photon brightness of 6.43 × 109 Hz/mW2/GHz and photon efficiency of 19.9 GHz/mW2 with the collection of 11 frequency bins. The generated QFCs produce heralded single photons with low heralded second-order correlation gh20=0.0024 and energy-time entangled photon pairs with high visibility of 98.19%. Consistent performance across wafer-scale multiple dies confirms the robustness and manufacturability of the designed device. This work establishes a scalable and high-yield pathway toward monolithic quantum photonic integrated circuits.

APL Quantum•Apr 6, 2026•0 citations

Nonlinear Electro-Optic Visible Photonic Circuits for Solid-State Quantum Defects

Yongchan Park, Yong Soo Lee, Hansol Kim +11 more

Integrated visible photonic engines for solid-state quantum defects provide a foundation for scalable quantum networks. While miniaturization is advancing, active manipulation remains limited by the difficulty of achieving simultaneous milliwatt-scale visible light generation and high-contrast modulation. Despite extensive efforts, the concurrent chip-scale realization of nonlinear frequency conversion and fast temporal gating for high-fidelity quantum control has remained elusive. Here, we demonstrate a monolithic thin-film lithium niobate (TFLN) platform integrating periodically poled frequency conversion with GHz-bandwidth electro-optic (EO) switching. The device delivers off-chip green-light power exceeding 1 mW with an extinction ratio (ER) of 42.2 dB, enabling coherent spin control and time-resolved lifetime measurements of individual nitrogen-vacancy (NV) centers in diamond through nanosecond gating. System performance is validated through pulsed optically detected magnetic resonance (ODMR), Rabi oscillations, and Ramsey interference, supported by time-tagged photon counting with nanosecond resolution. By unifying sufficient nonlinear light generation with high-speed active manipulation, this platform establishes a scalable framework for the realization of high-rate quantum communication nodes.

physics.opticsCross-listedarXiv:2603.21751•Advanced Materials•Mar 24, 2026•0 citations
Scaling quantum control for atoms, ions, and solid-state emitters requires gigahertz-frequency spectral control of high-power visible light in a volume-manufacturable platform. Silicon nitride photonics provides high power handling and CMOS-foundry compatibility but has no intrinsic mechanism for high-speed modulation. Integration with piezoelectric materials enables acousto-optic phase modulation, and mechanical resonant enhancement has made it efficient at gigahertz frequencies. However, a single resonance restricts the modulation waveform to a single tone, imposing Bessel-function sideband amplitudes and limiting frequency-shifting efficiency to 33.9%. Here we engineer a silicon nitride acousto-optic microstructure to support harmonically spaced resonances at 1.14 GHz and 2.28 GHz, each strongly optomechanically coupled to a 730 nm guided optical mode, so that tailored non-sinusoidal modulation waveforms can be resonantly synthesized. By piezoelectrically controlling the two mechanical amplitudes and their relative phase, we demonstrate 50% conversion to one sideband (1.5x the single-tone theoretical maximum), a flat seven-line comb, and a frequency shift with 60 dB carrier and 53 dB image suppression - to our knowledge the highest reported for an integrated modulator. The devices are fabricated in a 200 mm CMOS foundry, and we measure 91.7% yield without post-fabrication tuning across 36 devices from three wafers. We also show how the technique can be straightforwardly scaled to three or more harmonics. This result overcomes the trade-off between resonant enhancement and spectral programmability, with important consequences including improved single-qubit gate efficiency for hyperfine qubits.
Resonantly enhanced acousto-optic phase modulators offer efficient GHz control of visible light, but a single mechanical resonance restricts modulation to sinusoidal waveforms. This paper investigates whether harmonically aligned mechanical resonances can retain resonant enhancement while enabling programmable optical spectra in a CMOS-compatible platform.
A silicon-nitride–aluminium-nitride microstructure supports optomechanically coupled resonances near 1.141.141.14 and 2.28 GHz2.28\,\mathrm{GHz}2.28GHz for guided light at 730 nm730\,\mathrm{nm}730nm. Independently controlling the two drive amplitudes and their relative phase produces measured conversion of 50%50\%50% into one sideband, compared with the single-tone maximum of 33.9%33.9\%33.9%, and a flat seven-line comb. A separate frequency-shifting operating point gives 40%40\%40% conversion with 60 dB60\,\mathrm{dB}60dB carrier suppression and 53 dB53\,\mathrm{dB}53dB image suppression. Devices are fabricated in a 200 mm200\,\mathrm{mm}200mm CMOS foundry, with reported untuned yield of 91.7%91.7\%91.7% across 36 devices from three wafers.
Finite-element modeling identifies suitable mechanical modes; Bessel-function expansions describe spectral synthesis, and optical heterodyne measurements characterize sideband powers. Phase-sweep fits identify mechanical second-harmonic generation that modifies the programmed response. Numerical extensions predict 66.2%66.2\%66.2% maximum sideband conversion with three harmonics and 80.8%80.8\%80.8% with six; these are not experimental demonstrations.
Operation remains constrained by resonance alignment, available drive voltage, and mechanical bandwidth. Approximately 100 ns100\,\mathrm{ns}100ns switching times are inferred from oscillator fits rather than directly measured. Resonance splitting is attributed to periodic supports but requires further modeling. Improved qubit-driving efficiency is calculated using dispersive phase-to-amplitude conversion, not demonstrated with qubits.
Realizing photonic quantum computing at scale requires integrated circuits that combine ultra-low loss with fast, low-power, low-hysteresis, and low-crosstalk reconfiguration. These requirements are particularly challenging at visible wavelengths, where many quantum resource-state generators, including single-photon sources and quantum memories, naturally operate. Low-confinement silicon nitride waveguides offer the requisite loss performance, but conventional thermo-optic modulators dissipate significant static power, driving thermal crosstalk and precluding cryogenic operation. Visible-wavelength piezo-optomechanical circuits avoid these drawbacks, but existing demonstrations rely either on high-confinement waveguides with propagation losses of 35-100 dB/m, or on low-confinement platforms using foundry-incompatible PZT. Here we combine piezo-optomechanical actuation with a CMOS-foundry-fabricated, low-confinement silicon nitride platform, achieving 2.6 dB/m propagation loss at 780 nm, megahertz-scale modulation bandwidth, a half-wave voltage-length product of 2.8 Vm, and negligible hysteresis. We demonstrate reconfigurable Mach-Zehnder interferometers with 0.63 dB loss per spiral phase shifter, enabling deep, actively reconfigurable visible-wavelength quantum photonic circuits.
High-fidelity control of the thousands to millions of programmable qubits needed for utility-scale quantum computers presents a formidable challenge for control systems. In leading atomic systems, control is optical: UV-NIR beams must be fanned out over numerous spatial channels and modulated to implement gates. While photonic integrated circuits (PICs) offer a potentially scalable solution, they also need to simultaneously feature high-speed and high-extinction modulation, strong inter-channel isolation, and broad wavelength compatibility. Here, we introduce and experimentally validate a foundry-fabricated PIC platform that overcomes these limitations. Designed for Rubidium-87 neutral atom quantum computers, our 8-channel PICs, fabricated on a 200-mm wafer process, demonstrate an advanced combination of performance metrics. At the 795 nm single-qubit gate wavelength, we achieve a mean extinction ratio (ER) of 71.4 ±\pm± 1.1 dB, nearest-neighbor on-chip crosstalk of -68.0 ±\pm± 1.0 dB, and -50.8 ±\pm± 0.2 dB after parallel beam delivery in free-space. This high-performance operation extends to the 420 nm and 1013 nm wavelengths for two-qubit Rydberg gates, showing ERs of 42.4 dB (detector-limited) and 61.5 dB, respectively. The devices exhibit 10-90% rise times of 26 ±\pm± 7 ns, achieve dynamic switching to -60 dB levels within microsecond timescales, and show pulse stability errors at the 10−310^{-3}10−3 level. This work establishes a scalable platform for developing advanced large-scale optical control required in fault-tolerant quantum computers and other precision technologies.
Solutions for scalable, high-performance optical control are important for the development of scaled atom-based quantum technologies. Modulation of many individual optical beams is central to applying arbitrary gate and control sequences on arrays of atoms or atom-like systems. At telecom wavelengths, miniaturization of optical components via photonic integration has pushed the scale and performance of classical and quantum optics far beyond the limitations of bulk devices. However, material platforms for high-speed telecom integrated photonics lack transparency at the short wavelengths required by leading atomic systems. Here, we propose and implement a scalable and reconfigurable photonic control architecture using integrated, visible-light modulators based on thin-film lithium niobate. We combine this system with techniques in free-space optics and holography to demonstrate multi-channel, gigahertz-rate visible beamshaping. When applied to silicon-vacancy artificial atoms, our system enables the spatial and spectral addressing of a dynamically-selectable set of these stochastically-positioned point emitters.
Quantum frequency combs (QFCs) are essential to quantum photonic systems, enabling high dimensional entanglement in both temporal and frequency domains. Silicon photonics offers a promising platform for scalable and monolithic quantum photonic integrated circuits. However, its performance in QFC generation has been hindered by nonlinear losses and restricted phase-matching bandwidth. To overcome these challenges, we introduce a novel design strategy that combines high-order spatial mode engineering with an optimized free-carrier loss suppression structure in a silicon micro-ring resonator. This approach enables a broadband QFC spanning 150 nm, along with a high single pair photon brightness of 6.43 × 109 Hz/mW2/GHz and photon efficiency of 19.9 GHz/mW2 with the collection of 11 frequency bins. The generated QFCs produce heralded single photons with low heralded second-order correlation gh20=0.0024 and energy-time entangled photon pairs with high visibility of 98.19%. Consistent performance across wafer-scale multiple dies confirms the robustness and manufacturability of the designed device. This work establishes a scalable and high-yield pathway toward monolithic quantum photonic integrated circuits.
Integrated visible photonic engines for solid-state quantum defects provide a foundation for scalable quantum networks. While miniaturization is advancing, active manipulation remains limited by the difficulty of achieving simultaneous milliwatt-scale visible light generation and high-contrast modulation. Despite extensive efforts, the concurrent chip-scale realization of nonlinear frequency conversion and fast temporal gating for high-fidelity quantum control has remained elusive. Here, we demonstrate a monolithic thin-film lithium niobate (TFLN) platform integrating periodically poled frequency conversion with GHz-bandwidth electro-optic (EO) switching. The device delivers off-chip green-light power exceeding 1 mW with an extinction ratio (ER) of 42.2 dB, enabling coherent spin control and time-resolved lifetime measurements of individual nitrogen-vacancy (NV) centers in diamond through nanosecond gating. System performance is validated through pulsed optically detected magnetic resonance (ODMR), Rabi oscillations, and Ramsey interference, supported by time-tagged photon counting with nanosecond resolution. By unifying sufficient nonlinear light generation with high-speed active manipulation, this platform establishes a scalable framework for the realization of high-rate quantum communication nodes.