Quantum control techniques applied at macroscopic scales provide us with opportunities in fundamental physics and practical applications. Among them, measurement-based feedback allows efficient control of optomechanical systems and quantum-enhanced sensing. In this paper, we propose a near-resonant narrow-band force sensor with extremely low optically added noise in a membrane in the middle optomechanical system subject to a feedback-controlled in-loop light. The membrane's intrinsic motion consisting of zero-point motion and thermal motion is affected by the added noise of measurement due to the backaction noise and imprecision noise. We show that, in the optimal low-noise regime, the system is analogous to an optomechanical system containing a near quantum-limited optical parametric amplifier coupled to an engineered reservoir interacting with the cavity. Therefore, the feedback loop enhances the mechanical response of the system to the input while keeping the optically added noise of measurement below the standard quantum limit. Moreover, the system based on feedback offers a much larger amplification bandwidth than the same system with no feedback. Without the need to hybridize it with other quantum systems or introduce nonlinearities, our force sensor may have broad applications ranging from biology and medicine to gravitational wave detection and tests of fundamental physics.
We introduce concepts from optimal estimation to the stabilization of precision frequency standards limited by noisy local oscillators. We develop a theoretical framework casting various measures for frequency standard variance in terms of frequency-domain transfer functions, capturing the effects of feedback stabilization via a time series of Ramsey measurements. Using this framework, we introduce an optimized hybrid predictive feedforward measurement protocol that employs results from multiple past measurements and transfer-function-based calculations of measurement covariance to improve the accuracy of corrections within the feedback loop. In the presence of common non-Markovian noise processes these measurements will be correlated in a calculable manner, providing a means to capture the stochastic evolution of the local oscillator frequency during the measurement cycle. We present analytic calculations and numerical simulations of oscillator performance under competing feedback schemes and demonstrate benefits in both correction accuracy and long-term oscillator stability using hybrid feedforward. Simulations verify that in the presence of uncompensated dead time and noise with significant spectral weight near the inverse cycle time predictive feedforward outperforms traditional feedback, providing a path towards developing a class of stabilization software routines for frequency standards limited by noisy local oscillators.
cavityoptomechanical coupling, and realizes a measurement of the oscillator’s displacement with an imprecision 40 dB below that at the standard quantum limit, while maintaining an imprecision-backaction product within a factor of 5 of the Heisenberg uncertainty limit. As a demonstration of its utility, we use the measurement to feedback cool the oscillator to an phonon occupation of 5.4 0.7 (i.e, a ground state probablity of 16%). Our results establish a new benchmark for the performance of a linear position sensor, and signal the emergence of engineered mechanical oscillators as practical subjects for measurement-based quantum control.
Abstract We present a formulation of measurement-based feedback control of a single quantum particle in one spatial dimension to consider arbitrary linear combinations of the position and momentum of the particle used as observables for monitoring and as generators of unitary feedback with strength proportional to the measured signal. We derive a feedback master equation and discuss a general approach to computing the steady-state solutions for arbitrary potentials. For a quantum harmonic oscillator or a free particle, we show that it is possible to cool and confine the system using feedback that simultaneously damps the measured observable and its conjugate momentum. Our general approach allows to identify a combination of measurement and feedback variables that, under certain circumstances, completely mitigates the noise induced by the measurement. The resulting deterministic evolution of expectation values in each realisation of the measurement resembles the dynamics of a damped classical oscillator, leading to a stationary state centred at the minimum of the potential, which becomes the ground state in the weak measurement limit. Remarkably, this stabilisation can be achieved using a fixed generator of feedback that is determined by the asymptotic values of the second-order moments of the steady state. In addition, we demonstrate that appropriate feedback adds a quadratic term in the measured observable to the Hamiltonian of the system. Moreover, we provide an argument for the possibility to cool systems with arbitrary potentials, provided that the measurement is strong enough to localise the particle on an interval smaller than the characteristic length scale of the potential.
Quantum sensing has been receiving researcher’s attention these years due to its ultrahigh sensitivity and precision. However, the bandwidth of the sensors may be low, thus limiting the scope of their practical applications. The low-bandwidth problem is conquered by feedback control methods, which are widely utilized in classic control fields. Based on a quantum harmonic oscillator model operating near the resonant point, the bandwidth and sensitivity of the quantum sensor are analyzed. The results give two important conclusions: (a) the bandwidth and sensitivity are two incompatible performance parameters of the sensor, so there must be a trade-off between bandwidth and sensitivity in practical applications; (b) the quantum white noise affects the signal to be detected in a non-white form due to the feedback control.
Quantum noise limits high-precision sensing, such as in gravitational wave detectors. Caves first proposed beating this shot-noise limit by injecting squeezed vacuum at the dark port of an interferometer. Frequency-dependent squeezing through a filter cavity now delivers broadband quantum noise reductions of up to 5.2 dB at Hanford and 6.1 dB at Livingston in the LIGO detectors' fourth observing run. Building on these advances, this thesis develops techniques for interferometric sensing under realistic loss and phase noise, spanning Gaussian state preparation, optomechanical readout and feedback control, and non-Gaussian state preparation. In Parts I and II, we work in the two-photon formalism, where states are Gaussian and dynamics are linear. In Part I, we present a waveguide squeezer as an alternative to the traditional bulk cavity-based source; it is single-pass, broadband, and compact, and its modularity opens a path to non-Gaussian state generation. We report the detection of squeezed light from waveguide sources at 1064 nm in the sub-MHz regime, and we phase-stabilize the squeezed vacuum with quantum noise locking. We also analyze the loss and phase-noise tolerance of Gaussian states. In Part II, we design a tabletop phase-sensitive optomechanical amplifier and analyze its performance in terms of cavity stability, control system, and noise budget. We then implement the locking scheme, including Pound-Drever-Hall locking of the cavity, and characterize the noise budget at the initial stage. We also propose using optomechanics for coherent feedback control, which could evade back-action and broaden the detection bandwidth of future gravitational wave detectors. In Part III, we turn to non-Gaussian states. Phase noise does not preserve Gaussianity, so the best input state under combined loss and phase noise need not be Gaussian. We numerically optimize the input state for displacement sensing over the
(η,σϕ) landscape, integrating the Lindblad master equation in a truncated Fock basis and computing the quantum Fisher information. Within the Gaussian sub-family, the optimizer returns a displaced squeezed state once phase noise is appreciable, rather than pure squeezed vacuum. Without the Gaussian restriction, the optimized states sort roughly into four classes (Fock-like, cubic-phase-like, discrete-rotational, and squeezed), each dominant in a different region of the parameter space. In the experimentally relevant region of 1% loss and 100 mrad phase noise, cat states outperform squeezed vacuum even with balanced homodyne readout, an improvement implementable in the near term. We also show that the non-Gaussian advantage persists at higher photon budgets, well above
Nˉ=5. Together, these results show how state preparation, readout, and feedback choices trade off against realistic loss and phase noise, and identify the regimes where non-Gaussian states perform better.