Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.10683

Floquet Majorana XYZ Codes with Tunable Logical Dynamics

Xinyu Sun, Hong Yao

quant-phcond-mat.stat-mechcond-mat.str-elSubmitted Sep 9, 2026• Announced Sep 11, 2026• 0 citations
arXivHTMLPDF

Abstract

We construct Floquet codes from the Majorana XYZ subsystem code with local realizations both in qubits and directly in microscopic Majorana modes with lattice size $L\times L$. For a three-step cycle, odd $L$ supports one static logical qubit, whereas even $L$ supports two. For even $L$ with $L=4n+2$, both logical qubits admit time-independent Pauli representatives. For $L=4n$, by contrast, one Pauli of the second logical qubit remains fixed throughout the cycle, while every representative of its conjugate must evolve through the measurement cycle. This distinction follows from a parity-dependent algebraic obstruction and disappears when the cycle is reduced to two steps, which restores a fully static logical pair. Thus, the same encoded logical degree of freedom can be switched between static and partially dynamical forms by the measurement schedule. With one open direction, suitable protocols can be implemented using only local Majorana parity measurements. To our knowledge, this is the first Floquet-code family with both a local qubit representation and a direct microscopic Majorana realization.

Comments
5 pages, 3 figures; Supplemental Material included

Related papers

Floquet implementation of a 3d fermionic toric code with full logical code space

Yoshito Watanabe, Bianca Bannenberg, Simon Trebst

Floquet quantum error-correcting codes provide an operationally economical route to fault tolerance by dynamically generating stabilizer structures using only two-body Pauli measurements. But while it is well established that stabilizer codes in higher spatial dimensions gain additional levels of intrinsic robustness, higher-dimensional Floquet codes have hitherto been explored only in limited scope. Here we introduce a 3d generalization of a Floquet code whose instantaneous stabilizer group realizes a 3d fermionic toric code, while crucially preserving all three logical qubits throughout the entire measurement sequence. One central ingredient is the identification of a 3d lattice geometry that generalizes the features of the Kekulé lattice underlying the 2d Hastings-Haah code - specifically, a structure where deleting any one edge color yields a two-color subgraph that decomposes into short, closed loops rather than homologically nontrivial chains. This loop property avoids the collapse of logical information that plagues naive sequential two-color measurement schedules on many 3d lattices. Although, for our lattice geometry, a simple 3-round cycle that sequentially measures the three types of parity checks does not expose the full error syndrome set, we show that one can append a measurement sequence to extract the missing syndromes without disturbing the logical subspace. Beyond code design, 3d tricoordinated lattice geometries define a family of 3d monitored Kitaev models, in which random measurements of the non-commuting parity checks give rise to dynamically created entangled phases with nontrivial topology. In discussing the general structure of their underlying phase diagrams and, in particular, the existence of certain quantum critical points, we again make a connection to the general preservation of logical information in time-ordered Floquet protocols.

quant-pharXiv:2602.12685•Feb 16, 2026•1 citation

Stairway Codes: Floquetifying Bivariate Bicycle Codes and Beyond

Shoham Jacoby, Alex Retzker, Fernando Pastawski

Floquet codes define fault-tolerant protocols through periodic measurement sequences that drive a dynamically evolving stabilizer group. They provide a natural framework for hardware supporting two-qubit parity measurements but no unitary entangling gates. However, few known constructions achieve both high encoding rates and high thresholds. We close this gap by introducing Stairway codes, a family of high-rate Floquet protocols obtained by Floquetifying Abelian two-block group algebra codes, a class that includes the bivariate bicycle codes. By representing the static code as a foliated ZX-calculus network within a $(w{-}1)$-dimensional space-time lattice and rotating the time axis, we decompose its weight-$w$ stabilizers into a periodic sequence of pairwise measurements. This reduces the design of new codes within this family to the selection of favorable periodic boundary conditions. We identify instances with competitive parameters, analyze their distance under circuit-level noise, and demonstrate logical error rates surpassing those of other Floquet codes at comparable encoding rates. Remarkably, our construction requires fewer than 300 physical qubits to match the distance and encoding rate of semi-hyperbolic Floquet codes that use over 1300 qubits.

quant-pharXiv:2603.00228•Mar 3, 2026•9 citations

Simple Construction of Qudit Floquet Codes on a Family of Lattices

Andrew Tanggara, Mile Gu, Kishor Bharti

Dynamical quantum error-correcting codes (QECC) offer wider possibilities in how one can protect logical quantum information from noise and perform fault-tolerant quantum computation compared to static QECCs. A family of dynamical QECCs called the ``Floquet codes'' consists of a periodic sequence of two-body measurements that enables error-correction on many-body systems, relaxing hardware implementation requirements and improving error-correction reliability. Existing results on Floquet codes has been focused on qubits, two-level quantum systems, with very little attention given on higher dimensional quantum systems, or qudits. We bridge this gap by proposing a simple, yet general construction of qudit Floquet codes based on a simple set of conditions on the sequence two-body measurements defining the code. Moreover, this construction applies to a large family of configurations of qudits on the vertices of a three-colorable lattice which connectivity represented by the edges. We show that this construction includes the existing constructions of both qubit and qudit Floquet codes as special cases. In addition, any qudit Floquet code obtained by our construction achieves a rate of encoded logical qudits over physical qudits approaching $\frac{1}{2}$ as the number of physical qudits in total and on the faces of the lattice grows larger, as opposed to vanishing rate in existing qudit Floquet code constructions.

arXiv:2410.02022•Oct 2, 2024•11 citations

Floquetifying the Colour Code

Alex Townsend-Teague, Julio C. Magdalena de la Fuente, Markus S. Kesselring

Floquet codes are a recently discovered type of quantum error correction code.They can be thought of as generalising stabilizer codes and subsystem codes, by allowing the logical Pauli operators of the code to vary dynamically over time.In this work, we use the ZX-calculus to create new Floquet codes that are in a definable sense equivalent to known stabilizer codes.In particular, we find a Floquet code that is equivalent to the colour code, but has the advantage that all measurements required to implement it are of weight one or two.Notably, the qubits can even be laid out on a square lattice.This circumvents current difficulties with implementing the colour code fault-tolerantly, while preserving its advantages over other well-studied codes, and could furthermore allow one to benefit from extra features exclusive to Floquet codes.On a higher level, as in Ref. [BLN + 23], this work shines a light on the relationship between 'static' stabilizer and subsystem codes and 'dynamic' Floquet codes; at first glance the latter seems a significant generalisation of the former, but in the case of the codes that we find here, the difference is essentially just a few basic ZX-diagram deformations.

arXiv:2307.11136•Electronic Proceedings in Theoretical Computer Science•Aug 23, 2023•45 citations

Dynamical quantum codes and logic gates on a lattice with sparse connectivity

Dominic J. Williamson, Bence Hetényi

We introduce several dynamical schemes that take advantage of mid-circuit measurement and nearest-neighbor gates on a lattice with maximum vertex degree three to implement topological codes and perform logic gates between them. We first review examples of Floquet codes and their implementation with nearest-neighbor gates and ancillary qubits. Next, we describe implementations of these Floquet codes that make use of the ancillary qubits to reset all qubits every measurement cycle. We then show how switching the role of data and ancilla qubits allows a pair of Floquet codes to be implemented simultaneously. We describe how to perform a logical Clifford gate to entangle a pair of Floquet codes that are implemented in this way. Finally, we show how switching between the color code and a pair of Floquet codes, via a depth-two circuit followed by mid-circuit measurement, can be used to perform syndrome extraction for the color code.

arXiv:2510.05225•Oct 6, 2025•4 citations

Floquet Abelian Multicycle Codes

Alexey A. Kovalev

Abelian multicycle (AMC) codes are compact quantum low-density parity-check codes whose multiblock chain-complex structure provides redundant low-weight stabilizers and supports single-shot error correction. We introduce Floquet AMC codes by deriving a quotient-lattice representation of a general level-$j$, $D$-dimensional AMC complex over a finite Abelian group algebra, lifting this lattice to spacetime, and rotating the circuit-time direction in the associated ZX network. When the check and data spiders have even valence and admit a time-oriented local port matching, the network decomposes into a periodic schedule of native two-qubit $XX$ and $ZZ$ measurements. We construct generalized-bicycle and level-$2$ AMC4 examples, determine their instantaneous stabilizer groups, and compute their embedded distances by minimizing over all inequivalent circuit cuts. For AMC4 instances locally equivalent to four-dimensional toric codes, we obtain Floquet memories with parameters $[[108,6,5]]$, $[[144,6,8]]$, and $[[324,6,10]]$. Local Pauli-web detector templates and beam-search decoding under the measurement-native EM3 noise model yield an estimated pseudothreshold of approximately $1.2\%$. These results provide compact measurement-only realizations of higher-dimensional homological redundancy without directly measuring the original weight-six stabilizers.

quant-pharXiv:2607.27521•Jul 31, 2026•1 citation
We construct Floquet codes from the Majorana XYZ subsystem code with local realizations both in qubits and directly in microscopic Majorana modes with lattice size L×LL\times LL×L. For a three-step cycle, odd LLL supports one static logical qubit, whereas even LLL supports two. For even LLL with L=4n+2L=4n+2L=4n+2, both logical qubits admit time-independent Pauli representatives. For L=4nL=4nL=4n, by contrast, one Pauli of the second logical qubit remains fixed throughout the cycle, while every representative of its conjugate must evolve through the measurement cycle. This distinction follows from a parity-dependent algebraic obstruction and disappears when the cycle is reduced to two steps, which restores a fully static logical pair. Thus, the same encoded logical degree of freedom can be switched between static and partially dynamical forms by the measurement schedule. With one open direction, suitable protocols can be implemented using only local Majorana parity measurements. To our knowledge, this is the first Floquet-code family with both a local qubit representation and a direct microscopic Majorana realization.
Floquet quantum error-correcting codes provide an operationally economical route to fault tolerance by dynamically generating stabilizer structures using only two-body Pauli measurements. But while it is well established that stabilizer codes in higher spatial dimensions gain additional levels of intrinsic robustness, higher-dimensional Floquet codes have hitherto been explored only in limited scope. Here we introduce a 3d generalization of a Floquet code whose instantaneous stabilizer group realizes a 3d fermionic toric code, while crucially preserving all three logical qubits throughout the entire measurement sequence. One central ingredient is the identification of a 3d lattice geometry that generalizes the features of the Kekulé lattice underlying the 2d Hastings-Haah code - specifically, a structure where deleting any one edge color yields a two-color subgraph that decomposes into short, closed loops rather than homologically nontrivial chains. This loop property avoids the collapse of logical information that plagues naive sequential two-color measurement schedules on many 3d lattices. Although, for our lattice geometry, a simple 3-round cycle that sequentially measures the three types of parity checks does not expose the full error syndrome set, we show that one can append a measurement sequence to extract the missing syndromes without disturbing the logical subspace. Beyond code design, 3d tricoordinated lattice geometries define a family of 3d monitored Kitaev models, in which random measurements of the non-commuting parity checks give rise to dynamically created entangled phases with nontrivial topology. In discussing the general structure of their underlying phase diagrams and, in particular, the existence of certain quantum critical points, we again make a connection to the general preservation of logical information in time-ordered Floquet protocols.
Floquet codes define fault-tolerant protocols through periodic measurement sequences that drive a dynamically evolving stabilizer group. They provide a natural framework for hardware supporting two-qubit parity measurements but no unitary entangling gates. However, few known constructions achieve both high encoding rates and high thresholds. We close this gap by introducing Stairway codes, a family of high-rate Floquet protocols obtained by Floquetifying Abelian two-block group algebra codes, a class that includes the bivariate bicycle codes. By representing the static code as a foliated ZX-calculus network within a (w−1)(w{-}1)(w−1)-dimensional space-time lattice and rotating the time axis, we decompose its weight-www stabilizers into a periodic sequence of pairwise measurements. This reduces the design of new codes within this family to the selection of favorable periodic boundary conditions. We identify instances with competitive parameters, analyze their distance under circuit-level noise, and demonstrate logical error rates surpassing those of other Floquet codes at comparable encoding rates. Remarkably, our construction requires fewer than 300 physical qubits to match the distance and encoding rate of semi-hyperbolic Floquet codes that use over 1300 qubits.
Dynamical quantum error-correcting codes (QECC) offer wider possibilities in how one can protect logical quantum information from noise and perform fault-tolerant quantum computation compared to static QECCs. A family of dynamical QECCs called the ``Floquet codes'' consists of a periodic sequence of two-body measurements that enables error-correction on many-body systems, relaxing hardware implementation requirements and improving error-correction reliability. Existing results on Floquet codes has been focused on qubits, two-level quantum systems, with very little attention given on higher dimensional quantum systems, or qudits. We bridge this gap by proposing a simple, yet general construction of qudit Floquet codes based on a simple set of conditions on the sequence two-body measurements defining the code. Moreover, this construction applies to a large family of configurations of qudits on the vertices of a three-colorable lattice which connectivity represented by the edges. We show that this construction includes the existing constructions of both qubit and qudit Floquet codes as special cases. In addition, any qudit Floquet code obtained by our construction achieves a rate of encoded logical qudits over physical qudits approaching 12\frac{1}{2}21​ as the number of physical qudits in total and on the faces of the lattice grows larger, as opposed to vanishing rate in existing qudit Floquet code constructions.
Floquet codes are a recently discovered type of quantum error correction code.They can be thought of as generalising stabilizer codes and subsystem codes, by allowing the logical Pauli operators of the code to vary dynamically over time.In this work, we use the ZX-calculus to create new Floquet codes that are in a definable sense equivalent to known stabilizer codes.In particular, we find a Floquet code that is equivalent to the colour code, but has the advantage that all measurements required to implement it are of weight one or two.Notably, the qubits can even be laid out on a square lattice.This circumvents current difficulties with implementing the colour code fault-tolerantly, while preserving its advantages over other well-studied codes, and could furthermore allow one to benefit from extra features exclusive to Floquet codes.On a higher level, as in Ref. [BLN + 23], this work shines a light on the relationship between 'static' stabilizer and subsystem codes and 'dynamic' Floquet codes; at first glance the latter seems a significant generalisation of the former, but in the case of the codes that we find here, the difference is essentially just a few basic ZX-diagram deformations.
We introduce several dynamical schemes that take advantage of mid-circuit measurement and nearest-neighbor gates on a lattice with maximum vertex degree three to implement topological codes and perform logic gates between them. We first review examples of Floquet codes and their implementation with nearest-neighbor gates and ancillary qubits. Next, we describe implementations of these Floquet codes that make use of the ancillary qubits to reset all qubits every measurement cycle. We then show how switching the role of data and ancilla qubits allows a pair of Floquet codes to be implemented simultaneously. We describe how to perform a logical Clifford gate to entangle a pair of Floquet codes that are implemented in this way. Finally, we show how switching between the color code and a pair of Floquet codes, via a depth-two circuit followed by mid-circuit measurement, can be used to perform syndrome extraction for the color code.
Abelian multicycle (AMC) codes are compact quantum low-density parity-check codes whose multiblock chain-complex structure provides redundant low-weight stabilizers and supports single-shot error correction. We introduce Floquet AMC codes by deriving a quotient-lattice representation of a general level-jjj, DDD-dimensional AMC complex over a finite Abelian group algebra, lifting this lattice to spacetime, and rotating the circuit-time direction in the associated ZX network. When the check and data spiders have even valence and admit a time-oriented local port matching, the network decomposes into a periodic schedule of native two-qubit XXXXXX and ZZZZZZ measurements. We construct generalized-bicycle and level-222 AMC4 examples, determine their instantaneous stabilizer groups, and compute their embedded distances by minimizing over all inequivalent circuit cuts. For AMC4 instances locally equivalent to four-dimensional toric codes, we obtain Floquet memories with parameters [[108,6,5]][[108,6,5]][[108,6,5]], [[144,6,8]][[144,6,8]][[144,6,8]], and [[324,6,10]][[324,6,10]][[324,6,10]]. Local Pauli-web detector templates and beam-search decoding under the measurement-native EM3 noise model yield an estimated pseudothreshold of approximately 1.2%1.2\%1.2%. These results provide compact measurement-only realizations of higher-dimensional homological redundancy without directly measuring the original weight-six stabilizers.