Bosonic error correction provides a hardware-efficient route to protected qubits for accurate quantum information processing. A critical component for error correction of rotation-symmetric bosonic (RSB) codes, like the well-known cat codes, is the two-mode controlled-rotation (CROT) operation. The CROT gate is useful because of its code-agnostic generality and its error-propagation properties. While the CROT gate can in principle be composed from existing bosonic physical primitives, the desirable properties are typically lost when composed as a sequence of imperfect primitive operations. Past work has focused on direct implementations that rely on features of specific codes. Here, we present a direct route to CROT within the circuit-QED architecture that retains its code-agnostic and error-propagation characteristics. By driving a transmon simultaneously coupled to two microwave cavities, we controllably enhance the effective nonlinearities between the microwave cavities and thus engineer the necessary two-mode interaction underlying the CROT gate. Using only a single drive frequency, we can achieve an on-off ratio sufficient for gate implementation, while minimizing mode distortions. We provide simple analytical formulas that permit the identification of potential working regimes, further refined by exact numerics, and illustrate the efficacy of our CROT approach in an error-correction example involving different RSB codes within the same circuit. Our CROT gate adds to the arsenal of direct two-mode gates available for general bosonic information processing.
Bosonic error correction provides a hardware-efficient route to protected qubits for accurate quantum information processing. A critical component for error correction of rotation-symmetric bosonic (RSB) codes, like the well-known cat codes, is the two-mode controlled-rotation (CROT) operation. The CROT gate is useful because of its code-agnostic generality and its error-propagation properties. While the CROT gate can in principle be composed from existing bosonic physical primitives, the desirable properties are typically lost when composed as a sequence of imperfect primitive operations. Past work has focused on direct implementations that rely on features of specific codes. Here, we present a direct route to CROT within the circuit-QED architecture that retains its code-agnostic and error-propagation characteristics. By driving a transmon simultaneously coupled to two microwave cavities, we controllably enhance the effective nonlinearities between the microwave cavities and thus engineer the necessary two-mode interaction underlying the CROT gate. Using only a single drive frequency, we can achieve an on-off ratio sufficient for gate implementation, while minimizing mode distortions. We provide simple analytical formulas that permit the identification of potential working regimes, further refined by exact numerics, and illustrate the efficacy of our CROT approach in an error-correction example involving different RSB codes within the same circuit. Our CROT gate adds to the arsenal of direct two-mode gates available for general bosonic information processing.
Cat-state qubits (qubits encoded with cat states) have recently drawn intensive attention due to their enhanced lifetimes with quantum error correction. We here propose a method to implement a universal controlled-phase gate of two cat-state qubits via two microwave resonators coupled to a superconducting transmon qutrit. During the gate operation, the qutrit remains in the ground state; thus decoherence from the qutrit is greatly suppressed. This proposal requires only two basic operations and neither classical pulse nor measurement is needed; therefore the gate realization is simple. Numerical simulations show that high-fidelity implementation of this gate is feasible with current circuit QED technology. The proposal is quite general and can be applied to implement the proposed gate with two microwave resonators or two optical cavities coupled to a single three-level natural or artificial atom.
The rich dynamics and large Hilbert space of quantum harmonic oscillators make them natural candidates for hardware-efficient and error-correctable quantum information processing. However, implementing direct entangling operations between oscillators remains an outstanding challenge. Existing strategies typically rely on parametrically activating interactions that populate the excited states of a nonlinear element, which introduces additional dissipation channels and potential leakage from the encoded manifold. Here, we engineer a Raman-assisted cross-Kerr interaction between microwave photons hosted in two superconducting cavities. Crucially, this dynamics does not excite the mediating nonlinear coupler, thereby suppressing coupler induced decoherence and leakage out of the bosonic code space. We use this direct nonlinear coupling to implement a controlled-phase gate within the single- and two-photon subspaces of two oscillators, deterministically generating entanglement between them. Finally, we use these engineered dynamics to implement a photon-number parity check on a storage cavity via purely bosonic interactions with an ancillary cavity, demonstrating an enhancement in the storage lifetime. Our work provides a promising pathway toward engineering robust operations that act entirely within a protected bosonic code space and realizing fault-tolerant quantum information processing with bosonic elements.
The interaction between a qubit and its environment can be engineered such that one error channel dominates over all others, resulting in noise bias. This property enables error correction codes to focus on the dominant error type, thereby significantly reducing the number of physical systems required for fault-tolerant quantum computation. However, engineering noise bias typically introduces complexity at the physical system level, which decreases its usefulness by limiting scalability. Here, we introduce and experimentally realize a noise-biased qubit in a standard transmon-readout resonator circuit, one of the most common superconducting architectures, by only adding a single microwave tone. We encode the qubit in the transmon ∣g⟩- and ∣f⟩-states, and engineer a frequency-selective gain channel that counteracts single-photon loss errors between the computational states. We demonstrate an order-of-magnitude enhancement in relaxation time compared to the ∣g⟩−∣e⟩ encoding, conceding only a factor-of-two decrease in the echo-coherence time. Furthermore, we show that this qubit is compatible with fast, high-fidelity operations. Our results open a path towards using this system as a simple building-block for hardware-efficient quantum error detection and correction schemes.
Bosonic codes encode quantum information into a single infinite-dimensional physical system endowed with error correction capabilities. This reduces the need for complex management of many physical constituents compared with standard approaches employing multiple physical qubits. Recent discussions of bosonic codes centre around correcting only boson-loss errors, with phase errors either actively suppressed or deferred to subsequent layers of encoding with standard qubit codes. Rotationally symmetric bosonic (RSB) codes, which include the well-known cat and binomial codes, are capable of simultaneous correction of loss and phase errors, offering an alternate route that deals with arbitrary errors already at the base layer. Here, we investigate the robustness of such codes, moving away from the more idealistic past studies towards a circuit-level noise analysis closer to the practical situation where every physical component in the device is potentially faulty. We extend the concept of fault tolerance to the case of RSB codes, and then examine the performance of two known error correction circuits under circuit-level noise. Our analysis reveals a significantly more stringent noise threshold for fault-tolerant operation than found in past works; nevertheless, we show how, through waiting-time optimization and the use of squeezing, we can restore the noise requirements to a regime achievable with near-term quantum hardware. While our focus here is on cat codes for concreteness, a similar analysis applies for general RSB codes.
Quantum computers use the principles of quantum mechanics to store and manipulate information encoded in the quantized levels of physical systems. A goal of quantum computers is to accurately solve problems that are intractable for classical computers, such as simulating molecular dynamics and prime factorization of large integers. However, the failure probability is too high for quantum computers to solve useful problems. Fortunately, quantum error correction (QEC) provides a way to perform robust computations in the presence of errors by distributing information across multiple physical systems. Bosonic quantum error-correcting codes offer a hardware-efficient avenue for QEC where information is encoded in the continuous phase-space of a single harmonic oscillator. The linear harmonic oscillator realised as the microwave modes of a superconducting resonator is controlled via a nonlinear superconducting control qubit. Experiments on bosonic QEC are limited by bit flip errors in the control qubit, leading to low logical lifetimes of the storage resonator. Our idea is to replace the transmon with a heavy fluxonium qubit that has intrinsic protection against bit-flips. With this architecture in mind, we investigate the performance of a universal gateset comprising of Echoed Conditional Displacement gates and single qubit rotations. Wenumerically solve the Schrödinger equation for a closed resonator- fluxonium device and use a combination of quantum and semiclassical approaches to simulate the system exactly. We adopt a pulse-level implementation of quantum gates where we realize target gates by applying tailored drives on the resonator. We develop a resonator frame-tracking technique that allows us to simulate the dynamics of the driven resonator exactly with less than five fock levels while retaining all the physics of the problem. This technique allowed us to accurately simulate the device up to a few 10000s of photons, matching experimental results, that otherwise would not be possible even using high-performance computers due to excessive memory and simulation time required.
There are two main approaches to correcting errors during quantum computation.The first one is redundantly embedding the degrees of freedom of a single qubit into multiple qubits.The second is known as bosonic codes, a method that embeds the information of a single qubit into a single multi-level system, such as a harmonic oscillator, using an auxiliary qubit.For the former, it is essential to implement quantum operations with low wiring costs and develop an architecture robust to parameter variations during fabrication steps.For the latter, it is necessary to establish a state manipulation method that does not degrade the coherence of the harmonic oscillator.Keeping these challenges in mind, we consulted on the research and obtained the following results.To achieve high-precision control in superconducting circuits, it is essential to establish a fabrication recipe for superconducting circuit elements with sufficiently long coherence times.We achieved state-of-the-art coherence times exceeding 400 µs of transmon qubits using high-temperature-grown Titanium Nitride superconducting thin films on silicon substrates.This result was achieved by optimizing the fabrication recipe and design of the superconducting circuit.Using a microwave-activated interaction with a fixed-frequency transmon qubit as a coupler, we developed a controlled-Z gate between transmon qubits.This method does not require frequency tunability of the qubits, and it maintains the advantages of fixed-frequency transmon qubits, such as long coherence time and low wiring cost, while minimizing the always-on residual ZZ interaction, which causes coherent errors, compared to conventional methods.This gate architecture offers higher design freedom and tolerance to parameter variations during fabrication steps.We implemented a conditional displacement gate between an auxiliary qubit and a resonator.Previously, in superconducting circuits, a weak dispersive coupling between the resonator and transmon qubit is primarily used as a resource interaction for the conditional displacement gate.Unfortunately, this valuable control resource can be a bit-flip error propagation channel during conditional gate operations.To address this issue, we implemented artificial spin-dependent forces (SDF) interaction between a superconducting resonator and a cubic transmon, offering second-order nonlinearity as a resource of SDF interaction.Using this interaction, we successfully prepared the superconducting resonator's squeezed vacuum and cat states.i