The struggle of the hour in quantum computing research is achieving effective suppression of the error mechanisms induced by the interaction of external radiation with superconducting quantum devices. Despite the rapid advancements in quantum error correction (QEC) of recent years, radiation-induced faults are yet to be fully addressed. These events are known to be the cause of simultaneous correlated defects in qubits that lie onto a single substrate, ultimately jeopardising QEC code effectiveness.
In this paper, we propose to selectively combine substrate-level phonon barriers and QEC interleaving via a planar-mesh tiling algorithm, TETRIS-Q, reaching efficient and effective suppression of radiation events. Our cross-layer solution comes at no extra cost in terms of QEC code execution or decoding time. We model and simulate radiation-induced transient faults over a plethora of barrier and QEC interleaving configurations. Through more than 51 million quantum circuit simulations, we show peak logical error reductions of more than $99.8 \%$, together with an $80\%$ reduction of the observable transient duration with permeable barriers. We find that sparser tiling can reach comparable performance to single qubit tiling, prompting cost reductions of upwards of $87 \%$ in barrier tracing. By leveraging independent QEC code interleaving, we measure up to one order of magnitude average logical error rate reductions without the use of permeable barriers, and up to three orders of magnitude with the joint usage of barriers.
The struggle of the hour in quantum computing research is achieving effective suppression of the error mechanisms induced by the interaction of external radiation with superconducting quantum devices. Despite the rapid advancements in quantum error correction (QEC) of recent years, radiation-induced faults are yet to be fully addressed. These events are known to be the cause of simultaneous correlated defects in qubits that lie onto a single substrate, ultimately jeopardising QEC code effectiveness.
In this paper, we propose to selectively combine substrate-level phonon barriers and QEC interleaving via a planar-mesh tiling algorithm, TETRIS-Q, reaching efficient and effective suppression of radiation events. Our cross-layer solution comes at no extra cost in terms of QEC code execution or decoding time. We model and simulate radiation-induced transient faults over a plethora of barrier and QEC interleaving configurations. Through more than 51 million quantum circuit simulations, we show peak logical error reductions of more than 99.8%, together with an 80% reduction of the observable transient duration with permeable barriers. We find that sparser tiling can reach comparable performance to single qubit tiling, prompting cost reductions of upwards of 87% in barrier tracing. By leveraging independent QEC code interleaving, we measure up to one order of magnitude average logical error rate reductions without the use of permeable barriers, and up to three orders of magnitude with the joint usage of barriers.
Reliability is fundamental for developing large-scale quantum computers. Since the benefit of technological advancements to the qubit’s stability is saturating, algorithmic solutions, such as quantum error correction (QEC) codes, are needed to bridge the gap to reliable computation. Unfortunately, the deployment of the first quantum computers has identified faults induced by natural radiation as an additional threat to qubits reliability. The high sensitivity of qubits to radiation hinders the large-scale adoption of quantum computers, since the persistence and area-of-effect of the fault can potentially undermine the efficacy of the most advanced QEC. In this paper, we investigate the resilience of various implementations of state-of-the-art QEC codes to radiation-induced faults. We report data from over 400 million fault injections and correlate hardware faults with the logical error observed after decoding the code output, extrapolating physical-to-logical error rates. We compare the code’s radiation-induced logical error rate over the code distance, the number and role in the QEC of physical qubits, the underlying quantum computer topology, and particle energy spread in the chip. We show that, by simply selecting and tuning properly the surface code, thus without introducing any overhead, the probability of correcting a radiation-induced fault is increased by up to 10%. Finally, we provide indications and guidelines for the design of future QEC codes to further increase their effectiveness against radiation-induced events.
Radiation impacts are a current challenge with computing on superconducting-based quantum devices because they can lead to widespread correlated errors across the device. Such errors can be problematic for quantum error correction (QEC) codes, which are generally designed to correct independent errors. To address this, we have developed a computational model to simulate the effects of radiation impacts on QEC performance. This is achieved by building from recently developed models of quasiparticle density, mapping radiation-induced qubit error rates onto a quantum error channel and simulation of a simple surface code. We also provide a performance metric to quantify the resilience of a QEC code to radiation impacts. Additionally, we sweep various parameters of chip design to test mitigation strategies for improved QEC performance. Our model approach is holistic, allowing for modular performance testing of error mitigation strategies and chip and code designs.
Superconducting quantum computing has become one of the leading technological routes toward practical quantum computing due to its relatively long coherence times and compatibility with scalable integration. However, the high error rates of physical qubits create a scaling paradox that limits further system expansion, making quantum error correction (QEC) a core enabler of fault-tolerant quantum computing. This paper briefly introduces superconducting quantum noise models, stabilizer-code principles, and representative research achievements from 2022 to 2023 as necessary theoretical background and benchmarking references, while mainly focusing on the latest research advances in quantum error correction codes in the field of superconducting quantum computing from 2024 to 2026. It elaborates on the foundational principles of superconducting quantum noise models and stabilizer codes, with a focus on analyzing the architectures and mechanisms of surface codes, color codes, high-rate qLDPC codes, and bosonic codes. This work also summarizes recent milestone achievements, including the first exponential suppression of logical errors achieved by surface codes, the significant reduction of hardware redundancy enabled by high-rate codes, and the break-even point crossed by bosonic codes. Through multidimensional comparisons, it is shown that achieving fault tolerance at the million-qubit scale will require deep synergistic optimization of hardware, codes, and decoders. On this basis, pathways and guidance are provided for building low-overhead, high-efficiency universal quantum computers.
Superconducting qubits are a promising platform for building fault-tolerant quantum computers, with recent achievement showing the suppression of logical error with increasing code size. However, leakage into noncomputational states, a common issue in practical quantum systems including superconducting circuits, introduces correlated errors that undermine quantum error correction (QEC) scalability. Here, we propose and demonstrate a leakage reduction scheme utilizing tunable couplers, a widely adopted ingredient in large-scale superconducting quantum processors. Leveraging the strong frequency tunability of the couplers and stray interaction between the couplers and readout resonators, we eliminate state leakage on the couplers, thus suppressing space-correlated errors caused by population propagation among the couplers. Assisted by the couplers, we further reduce leakage to higher qubit levels with high efficiency (98.1%) and low error rate on the computational subspace (0.58%), suppressing time-correlated errors during QEC cycles. The performance of our scheme demonstrates its potential as an indispensable building block for scalable QEC with superconducting qubits.
We present a general framework for applying linear quantum error mitigation (QEM) techniques directly to physical qubits within a logical qubit to suppress logical errors. By exploiting the linearity of quantum error correction (QEC), we demonstrate that any linear QEM method$\unicode{x2014}$including probabilistic error cancellation (PEC), zero-noise extrapolation (ZNE), and symmetry verification$\unicode{x2014}$can be integrated into the physical layer without requiring modifications to the subsequent QEC decoder. Applying this framework to memory experiments using PEC, we analytically prove and numerically verify that the leading-order contribution to the logical error can be removed, increasing the effective code distance by 2. Our simulations on repetition and rotated surface codes show that a distance-3 code with physical-level PEC achieves logical error rates lower than or similar to a distance-5 unmitigated code while using 40% and 64% fewer qubits, respectively. These results establish physical-level QEM as a widely compatible and resource-efficient strategy for enhancing logical performance in early fault-tolerant architectures.
Quantum computing is one of the most promising technology advances of the latest years. Qubits are highly sensitive to noise, which can make the output useless. Lately, it has been shown that superconducting qubits are extremely susceptible to external sources of faults, such as ionizing radiation. When adopted in large scale, radiation-induced errors are expected to become a serious challenge for qubits reliability. We propose an evaluation of the impact of transient faults in the execution of quantum circuits on superconducting chips. Inspired by the Architectural and Program Vulnerability Factors, widely used for classical computation, we propose the Quantum Vulnerability Factor (QVF) to measure the impact of qubit corruption on the circuit output. We model faults, and design a fault injector, based on the latest studies on real machines and radiation experiments. We report the finding of more than 388,000,000 fault injections, considering single and double faults, on three algorithms, identifying the faults and qubits that are more likely to impact the output. We give guidelines on how to map the qubits in real devices to reduce the output error and to reduce the probability of having a radiation-induced corruption modifying the output. Finally, we compare simulations with experiments on physical quantum computers.