Dynamical decoupling (DD) helps maintain high-fidelity quantum computations by suppressing dephasing noise through carefully timed refocusing pulses. In quantum charge-coupled device (QCCD) architectures, however, where ions are shuttled throughout the device, transport constrains when pulses can be applied and affects the phase accumulated by an ion. Conventional DD methods do not account for shuttling and may therefore schedule pulses that must be omitted or shifted after transport scheduling, weakening the protection from dephasing. We therefore introduce shuttling-aware dynamical decoupling (SADD), an offline compiler pass that jointly selects refocusing pulses and local ion rerouting while preserving logical-gate timings and the total schedule length. In benchmark simulations, SADD improves average final-state fidelity over both the original schedules and a simple nearest-feasible Hahn-echo baseline when dephasing dominates control and transport errors and varies slowly enough for DD. Rerouting enables otherwise infeasible pulse timings, while spatial information about the noise can provide further gains. These benefits disappear, however, when the added transport introduces too much error. Overall, our results show that coordinating DD with ion transport is an effective compiler strategy for reducing dephasing in QCCD processors.
Dynamical decoupling (DD) helps maintain high-fidelity quantum computations by suppressing dephasing noise through carefully timed refocusing pulses. In quantum charge-coupled device (QCCD) architectures, however, where ions are shuttled throughout the device, transport constrains when pulses can be applied and affects the phase accumulated by an ion. Conventional DD methods do not account for shuttling and may therefore schedule pulses that must be omitted or shifted after transport scheduling, weakening the protection from dephasing. We therefore introduce shuttling-aware dynamical decoupling (SADD), an offline compiler pass that jointly selects refocusing pulses and local ion rerouting while preserving logical-gate timings and the total schedule length. In benchmark simulations, SADD improves average final-state fidelity over both the original schedules and a simple nearest-feasible Hahn-echo baseline when dephasing dominates control and transport errors and varies slowly enough for DD. Rerouting enables otherwise infeasible pulse timings, while spatial information about the noise can provide further gains. These benefits disappear, however, when the added transport introduces too much error. Overall, our results show that coordinating DD with ion transport is an effective compiler strategy for reducing dephasing in QCCD processors.
We examine the impact of scheduling errors on dynamical decoupling (DD) in trapped-ion quantum charge-coupled devices (QCCDs) and develop better strategies for reducing memory errors. In the QCCD architecture, qubit transport and control introduce stochastic pulse delays that impact the efficiency of DD. Using the filter-function formalism, we analyze the performance of DD in the presence of scheduling-induced timing errors, showing that they increase the sensitivity of standard DD to low-frequency fluctuations. For typical memory errors in trapped-ion platforms, we numerically demonstrate that increasing the DD pulse frequency beyond 2 Hz is generally counterproductive due to scheduling-induced timing errors. Furthermore, we introduce a real-time DD protocol that inserts refocusing pulses opportunistically during idle periods. We demonstrate our methods on Quantinuum H2-1 with Ramsey delay-type experiments.
Dynamical decoupling (DD) is a widely used and resource-efficient technique for error suppression, but conventional DD relies on periodically repeating a short pulse block to refocus the qubit state during idle periods. Imperfections in this block cause residual errors to accumulate, ultimately degrading state recovery over long idle times. Here, we introduce a universal optimal tracking approach that extends the original tracking concept to a fully state-independent setting for designing DD sequences. By monitoring the qubit's evolution at predefined waypoints during optimization, the method dynamically compensates residual errors while preserving regular refocusing. Experimental demonstrations on a superconducting-qubit platform confirm the suppression of error accumulation under static control imperfections, in agreement with numerical predictions. Complementary simulations further show that optimal-tracking-based sequences maintain strong performance under time-dependent noise. These results establish optimal tracking as a practical and hardware-agnostic approach to designing short, robust DD sequences suitable for noisy quantum devices.
Trapped-ion quantum computers offer high-fidelity operations, long coherence times, and all-to-all connectivity within a single trap. However, scaling to large circuits is limited by the trap's ion capacity. The QCCD architecture addresses this by enabling ion shuttling across multiple traps, but excessive shuttling increases execution time and degrades fidelity. This paper presents an improved ion-shuttling approach targeting linear QCCD architectures. Building on a state-of-the-art approach [27] for linear trapped-ion devices, our approach introduces a front-layer-based scheduling method that dynamically prioritizes executable gates, along with a novel destination trap selection method for ion-shuttling, effectively reducing unnecessary ion movements. We also present a look-ahead gate selection strategy based on the gate dependency graph, avoiding the high runtime of the gate proximity approach used in the state-of-the-art approach, especially in circuits with all-to-all communication. Our approach achieves up to a 37.67% reduction in shuttle count and up to a 74.91% reduction in compilation time compared to the state-of-the-art approach for linear trapped-ion devices on actual NISQ benchmarks and synthetic circuits. On average, our approach achieves a 16.44% reduction in shuttle count and a 30.77% reduction in compilation time across all test cases. These improvements highlight the effectiveness of our approach, particularly for actual circuits.
Mobile spin qubit architectures promise flexible connectivity for efficient quantum error correction and relaxed device layout constraints, but their viability rests on preserving spin coherence during transport. While shuttling transforms spatial disorder into time-dependent noise, its net impact on spin coherence remains an open question. Here we demonstrate systematic noise mitigation during spin shuttling in a linear 28Si/SiGe quantum dot device. First, by passively reducing magnetic field gradients, we minimize charge-noise coupling to the spin and double the spatially averaged dephasing time T2∗(xn) from 4.4 to 8.5μs. Next, we exploit motional narrowing by periodically shuttling the qubit, achieving a further enhancement in coherence time up to T2∗,sh=11.5μs. Finally, we incorporate dynamical decoupling techniques while periodically shuttling over distances exceeding 200nm, reaching T2H,sh=32μs. For the same setup, we demonstrate that dressed-state shuttling provides robust protection against low-frequency noise with a decay time TRsh=21μs, without the overhead of pulsed control and allowing protection during one-way spin transport. By preserving coherence over timescales exceeding typical gate and readout operations, the demonstrated strategies establish mobile spin qubits as a viable solution for scalable silicon quantum processors.
Decoherence is a primary barrier to practical quantum computation, causing quantum states to degrade through phase randomization and irreversible energy relaxation. This study presents a simulation-based evaluation of echo-based dynamical decoupling (DD) pulse sequences as a software-level mitigation strategy in single-qubit systems. Using the Qiskit Aer density matrix simulator, four strategies—baseline, Hahn Echo, Carr-Purcell-Meiboom-Gill (CPMG), and Mixed Synchronization—were evaluated across low-frequency phase noise, high-frequency phase noise, and combined T₁ + T₂ noise regimes. Hahn Echo restored mean fidelity to 100.00% under low-frequency noise (baseline: 57.90%), while CPMG achieved 97.62% under high-frequency noise (baseline: 2.45%). Under combined noise, all strategies showed limited improvement, with Mixed-Sync reaching 65.34% versus 60.95%. Coefficient of variation (CV) analysis across 500 Monte Carlo trials showed that CPMG reduced purity-decay variance threefold under high-frequency noise, with bootstrap confidence intervals confirming statistical significance. Time-resolved analysis showed that CPMG suppressed variance growth throughout evolution, reducing variance growth from +267% (baseline) to +89%, while baseline and Hahn Echo exhibited progressive amplification of variance. These results show that dynamical decoupling influences the temporal structure of noise, not just mean fidelity. In T₂-dominated regimes, pulse sequences constrain variability; in mixed regimes, they partially shape it; and in T₁-dominated regimes, both mean performance and variability converge to hardware-limited behavior. DD effectively corrects reversible phase errors but cannot overcome irreversible T₁ loss, with implications for NISQ circuit design.
Dynamical decoupling (DD) refers to a well-established family of methods for error mitigation, comprising pulse sequences aimed at averaging away slowly evolving noise in quantum systems. Here we revisit the question of its efficacy in the presence of noisy pulses in scenarios important for quantum devices today: pulses with gate control errors, and the computational setting where DD is used to reduce noise in every computational gate. We focus on the well-known schemes of periodic (or universal) DD and its extension, concatenated DD, for scaling up its power. The qualitative conclusions from our analysis of these two schemes nevertheless apply to other DD approaches. In the presence of noisy pulses, DD does not always mitigate errors. It does so only when the added noise from the imperfect DD pulses does not outweigh the increased ability in averaging away the original background noise. We present break-even conditions that delineate when DD is useful, and further find that there is a limit in the performance of concatenated DD, specifically in how far one can concatenate the DD pulse sequences before the added noise no longer offers any further benefit in error mitigation.