Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2608.11563

Efficient Quantum Modular Reduction: Crandall reduction and its Fault-tolerant resource analysis

Changyeol Lee, Sungyeon Kook, Wooyeong Song, Kwangil Bae, Wonhyuk Lee, IlKwon Sohn

quant-phSubmitted Aug 12, 2026• Announced Aug 13, 2026• 0 citations
arXivHTMLPDF

Abstract

Modular arithmetic is central to quantum algorithms for cryptographic problems, including Shor's algorithm and Grover-based cryptanalysis, with modular reduction contributing substantially to circuit cost. Pseudo-Mersenne moduli $q=2^n-c$ allow classical Crandall reduction to replace division with folding and constant arithmetic, providing a structural opportunity for more efficient quantum modular reduction than Barrett reduction. We translate this advantage into a reversible quantum setting by deriving explicit folding and normalization conditions for $2n$-bit inputs. To the best of our knowledge, this constitutes the first exact reversible quantum circuit formulation of Crandall reduction. Based on this formulation, we develop two variants: Crandall reduction-1 is designed to minimize execution cost through one-step normalization, whereas Crandall reduction-2 uses two-step normalization to support a wider range of $c$ with limited overhead. Logical resource estimates show that both variants require fewer qubits and lower T-count and T-depth than optimized folding Barrett reduction. At $n=10$, Crandall reduction-1 reduces both T-count and T-depth by approximately 46.9% relative to optimized folding Barrett reduction. Surface-code analysis further shows that, at $n=20$ under the Sparse Blossom decoder, the estimated runtimes of the two variants are 30.05 ms and 35.39 ms, respectively, compared with 53.77 ms for optimized folding Barrett reduction. These results demonstrate the practical value of exploiting modulus-specific arithmetic structure in fault-tolerant quantum circuit design.

Comments
20 pages, 10 figures, 3 tables

Related papers

Optimized quantum folding Barrett reduction for quantum modular multipliers

Jian Zhang, Seong-Min Cho, Changyeol Lee +1 more

Due to the reversibility constraints of quantum circuits, the development of modular operations in quantum modular multiplication has been significantly limited. In this work, we propose an optimized modular operation scheme based on Barrett reduction and implement quantum circuits for three versions of Barrett reduction, including our optimized approach. The proposed quantum modular operation circuit can be integrated with quantum-quantum and quantum-classical multiplication circuits. Additionally, we analyze the quantum resource requirements of the proposed circuit and compare the results across the three versions. Our optimized folding Barrett reduction scheme demonstrates superior performance. Furthermore, general quantum modular reduction relies on recursive subtractors and controlled adders to avoid division operation, resulting in a T-depth of approximately [Formula: see text], where n is the bit length of the modulus. In contrast, our approach achieves a T-depth of only [Formula: see text] by utilizing the Barrett reduction.

Scientific Reports•Jul 2, 2025•2 citations

High Performance Quantum Modular Multipliers

Rich Rines, Isaac L. Chuang

We present a novel set of reversible modular multipliers applicable to quantum computing, derived from three classical techniques: 1) traditional integer division, 2) Montgomery residue arithmetic, and 3) Barrett reduction. Each multiplier computes an exact result for all binary input values, while maintaining the asymptotic resource complexity of a single (non-modular) integer multiplier. We additionally conduct an empirical resource analysis of our designs in order to determine the total gate count and circuit depth of each fully constructed circuit, with inputs as large as 2048 bits. Our comparative analysis considers both circuit implementations which allow for arbitrary (controlled) rotation gates, as well as those restricted to a typical fault-tolerant gate set.

arXiv:1801.01081•Jan 3, 2018•53 citations

Quantum Arithmetic Circuits in Public-Key Cryptography

Siyi Wang, Kyungbae Jang, Hyunji Kim +4 more

Quantum computing has advanced rapidly in recent decades, driven by developments across the technology stack, including quantum error-correcting codes and efficient quantum algorithms. Among these, quantum arithmetic circuits serve as fundamental building blocks for various promising algorithms. Despite their crucial role, the design of quantum arithmetic circuits faces challenges arising from the no-cloning theorem, qubit limitations, and circuit depth constraints, which significantly impact the efficiency of large-scale quantum computing. We provide an overview of quantum arithmetic circuits in the context of public-key cryptanalysis, with particular emphasis on optimization strategies such as measurement-based uncomputation and conditionally clean ancilla. We review state-of-the-art designs for essential arithmetic operations in public-key cryptanalysis such as addition, multiplication, and modular exponentiation. We also present an overview of the techniques used for fault-tolerant runtime and resource estimation in quantum cryptanalysis. In brief, this chapter emphasizes strategies for designing resource-efficient quantum arithmetic circuits, providing a basis for realistic evaluations of quantum cryptanalytic capabilities.

quant-pharXiv:2607.11713•Jul 14, 2026•0 citations

Resource-Efficient Modular Quantum Arithmetic Logic Unit with Clifford+T Optimization for Quantum Nanoelectronic Systems

P. Sowmithri, N. Roshitha, K. Santhi Priya, M. Manoj Kumar, K. Harika and M. Prakash

ABSTRACT Quantum arithmetic is a basic computational layer for reversible processing in quantum processors, yet its implementation cost grows rapidly with operand width and multi-qubit gate requirements. This paper presents a modular quantum arithmetic and logic unit (QALU) designed with resource-aware reversible primitives and Clifford+T decomposition. The architecture separates addition, subtraction, multiplication, and division into reusable submodules and evaluates their circuit cost in terms of T-count, T-depth, CNOT-count, CNOT-depth, qubit width, and total gate count. Hermitian LI gates and approximate Toffoli decompositions are incorporated to reduce redundant non-Clifford operations and circuit depth. The circuits are constructed and validated in Qiskit for small operand sizes, followed by symbolic resource analysis for scalable forms. For the demonstrated instances, the optimized adder is reduced from 10 to 7 total gates, the subtractor from 9 to 5, the multiplier from 12 to 8, and the divider from 11 to 6, while preserving the intended arithmetic mappings. The resulting modular framework provides a compact circuit-level approach for quantum arithmetic and is relevant to emerging quantum technology and quantum nanoelectronic systems where qubit count and fault-tolerant gate overhead are critical design constraints. Key words: quantum arithmetic, quantum ALU, reversible logic, Clifford+T, Hermitian LI gate, approximate Toffoli, Qiskit, quantum nanoelectronics.

International Journal of Emerging Trends in Engineering and Development•Nov 6, 2026•0 citations

A New Quantum Efficient Fault Tolerant Parity Preserving Clifford + T ALU

Shekoofeh Moghimi, Mohammad Reza Reshadinezhad, Antonio Rubio

Reversible logic is characterized by its feature of being a prominent application in low-power conventional computers and the most compatible logic in quantum computers. Quantum circuits executes quantum algorithms and are important in a new generation of advanced computing. However, they are highly error-prone and also subject to the use of limited and sensitive physical resources like qubits and quantum gates. This paper introduces a comprehensive fault tolerant quantum-based reversible circuit which can calculate a high variety number of arithmetic and logic operations. It uses both: parity preserving method for detecting one or an odd number of bit errors, and Clifford + T implementation for protecting circuits against decoherence faults. First, we propose a new fault-tolerant (parity preserving and Clifford + T) adder/subtractor and derive a quantum reversible Arithmetic and Logic Unit (ALU). These modules reach the most optimized extent of circuit line, ancilla inputs, and garbage outputs according to the logical analysis done in this work. This article focuses on reducing T-cost metrics in conjunction with enhancing the number of operations and quantum costs in proposed circuits compared to other counterparts. We propose 4-bit fault tolerant ALU derived from our proposed single-bit module to show the proposed circuit can be extended to any larger size. The proposed circuit is implemented in the Qiskit simulation tool, and output results confirm the accuracy of our design functionality. The proposed full adder/ subtractor achieves an average of 64% and 43%, and the proposed ALU circuit achieves an average of 38% and 27% improvement in T-count and T-depth, respectively compared to their counterparts. The proposed reversible quantum-optimized fault tolerant adder/subtractor and ALU units can be applied as the basic part of DSP systems and quantum processor units in quantum computing devices.

IEEE Transactions on Emerging Topics in Computing•Apr 1, 2026•0 citations

Improved quantum circuits for division

Priyanka Mukhopadhyay, Alexandru Gheorghiu, Hari Krovi

Arithmetic operations are an important component of many quantum algorithms. Optimizing quantum circuits for these operations therefore leads to more efficient implementations of the corresponding algorithms. In this paper, we develop new fault-tolerant quantum circuits for various integer division algorithms (both reversible and non-reversible). These circuits, when implemented in the Clifford+T gate set, achieve improvements in the asymptotic T-count and CNOT-count from $O(n^2)$ to $O(nm)$, and in the asymptotic T-depth from $O(n^2)$ to $O(n \log m)$, where $n$ and $m$ are the bit lengths of the dividend and divisor, respectively. The qubit counts are significantly lower than those in previous works. We achieve this through careful modifications of the division algorithms and by expressing them in terms of a primitive we call COMP-N-SUB that compares two integers and conditionally subtracts them. We show that this primitive can be implemented at a cost, in terms of both Clifford and non-Clifford gates, comparable to that of one addition. By contrast, performing comparison and conditional subtraction separately would cost roughly as much as a controlled addition plus a regular addition.

quant-pharXiv:2603.18110•Mar 19, 2026•1 citation
Modular arithmetic is central to quantum algorithms for cryptographic problems, including Shor's algorithm and Grover-based cryptanalysis, with modular reduction contributing substantially to circuit cost. Pseudo-Mersenne moduli q=2n−cq=2^n-cq=2n−c allow classical Crandall reduction to replace division with folding and constant arithmetic, providing a structural opportunity for more efficient quantum modular reduction than Barrett reduction. We translate this advantage into a reversible quantum setting by deriving explicit folding and normalization conditions for 2n2n2n-bit inputs. To the best of our knowledge, this constitutes the first exact reversible quantum circuit formulation of Crandall reduction. Based on this formulation, we develop two variants: Crandall reduction-1 is designed to minimize execution cost through one-step normalization, whereas Crandall reduction-2 uses two-step normalization to support a wider range of ccc with limited overhead. Logical resource estimates show that both variants require fewer qubits and lower T-count and T-depth than optimized folding Barrett reduction. At n=10n=10n=10, Crandall reduction-1 reduces both T-count and T-depth by approximately 46.9% relative to optimized folding Barrett reduction. Surface-code analysis further shows that, at n=20n=20n=20 under the Sparse Blossom decoder, the estimated runtimes of the two variants are 30.05 ms and 35.39 ms, respectively, compared with 53.77 ms for optimized folding Barrett reduction. These results demonstrate the practical value of exploiting modulus-specific arithmetic structure in fault-tolerant quantum circuit design.
Due to the reversibility constraints of quantum circuits, the development of modular operations in quantum modular multiplication has been significantly limited. In this work, we propose an optimized modular operation scheme based on Barrett reduction and implement quantum circuits for three versions of Barrett reduction, including our optimized approach. The proposed quantum modular operation circuit can be integrated with quantum-quantum and quantum-classical multiplication circuits. Additionally, we analyze the quantum resource requirements of the proposed circuit and compare the results across the three versions. Our optimized folding Barrett reduction scheme demonstrates superior performance. Furthermore, general quantum modular reduction relies on recursive subtractors and controlled adders to avoid division operation, resulting in a T-depth of approximately [Formula: see text], where n is the bit length of the modulus. In contrast, our approach achieves a T-depth of only [Formula: see text] by utilizing the Barrett reduction.
We present a novel set of reversible modular multipliers applicable to quantum computing, derived from three classical techniques: 1) traditional integer division, 2) Montgomery residue arithmetic, and 3) Barrett reduction. Each multiplier computes an exact result for all binary input values, while maintaining the asymptotic resource complexity of a single (non-modular) integer multiplier. We additionally conduct an empirical resource analysis of our designs in order to determine the total gate count and circuit depth of each fully constructed circuit, with inputs as large as 2048 bits. Our comparative analysis considers both circuit implementations which allow for arbitrary (controlled) rotation gates, as well as those restricted to a typical fault-tolerant gate set.
Quantum computing has advanced rapidly in recent decades, driven by developments across the technology stack, including quantum error-correcting codes and efficient quantum algorithms. Among these, quantum arithmetic circuits serve as fundamental building blocks for various promising algorithms. Despite their crucial role, the design of quantum arithmetic circuits faces challenges arising from the no-cloning theorem, qubit limitations, and circuit depth constraints, which significantly impact the efficiency of large-scale quantum computing. We provide an overview of quantum arithmetic circuits in the context of public-key cryptanalysis, with particular emphasis on optimization strategies such as measurement-based uncomputation and conditionally clean ancilla. We review state-of-the-art designs for essential arithmetic operations in public-key cryptanalysis such as addition, multiplication, and modular exponentiation. We also present an overview of the techniques used for fault-tolerant runtime and resource estimation in quantum cryptanalysis. In brief, this chapter emphasizes strategies for designing resource-efficient quantum arithmetic circuits, providing a basis for realistic evaluations of quantum cryptanalytic capabilities.
ABSTRACT Quantum arithmetic is a basic computational layer for reversible processing in quantum processors, yet its implementation cost grows rapidly with operand width and multi-qubit gate requirements. This paper presents a modular quantum arithmetic and logic unit (QALU) designed with resource-aware reversible primitives and Clifford+T decomposition. The architecture separates addition, subtraction, multiplication, and division into reusable submodules and evaluates their circuit cost in terms of T-count, T-depth, CNOT-count, CNOT-depth, qubit width, and total gate count. Hermitian LI gates and approximate Toffoli decompositions are incorporated to reduce redundant non-Clifford operations and circuit depth. The circuits are constructed and validated in Qiskit for small operand sizes, followed by symbolic resource analysis for scalable forms. For the demonstrated instances, the optimized adder is reduced from 10 to 7 total gates, the subtractor from 9 to 5, the multiplier from 12 to 8, and the divider from 11 to 6, while preserving the intended arithmetic mappings. The resulting modular framework provides a compact circuit-level approach for quantum arithmetic and is relevant to emerging quantum technology and quantum nanoelectronic systems where qubit count and fault-tolerant gate overhead are critical design constraints. Key words: quantum arithmetic, quantum ALU, reversible logic, Clifford+T, Hermitian LI gate, approximate Toffoli, Qiskit, quantum nanoelectronics.
Reversible logic is characterized by its feature of being a prominent application in low-power conventional computers and the most compatible logic in quantum computers. Quantum circuits executes quantum algorithms and are important in a new generation of advanced computing. However, they are highly error-prone and also subject to the use of limited and sensitive physical resources like qubits and quantum gates. This paper introduces a comprehensive fault tolerant quantum-based reversible circuit which can calculate a high variety number of arithmetic and logic operations. It uses both: parity preserving method for detecting one or an odd number of bit errors, and Clifford + T implementation for protecting circuits against decoherence faults. First, we propose a new fault-tolerant (parity preserving and Clifford + T) adder/subtractor and derive a quantum reversible Arithmetic and Logic Unit (ALU). These modules reach the most optimized extent of circuit line, ancilla inputs, and garbage outputs according to the logical analysis done in this work. This article focuses on reducing T-cost metrics in conjunction with enhancing the number of operations and quantum costs in proposed circuits compared to other counterparts. We propose 4-bit fault tolerant ALU derived from our proposed single-bit module to show the proposed circuit can be extended to any larger size. The proposed circuit is implemented in the Qiskit simulation tool, and output results confirm the accuracy of our design functionality. The proposed full adder/ subtractor achieves an average of 64% and 43%, and the proposed ALU circuit achieves an average of 38% and 27% improvement in T-count and T-depth, respectively compared to their counterparts. The proposed reversible quantum-optimized fault tolerant adder/subtractor and ALU units can be applied as the basic part of DSP systems and quantum processor units in quantum computing devices.
Arithmetic operations are an important component of many quantum algorithms. Optimizing quantum circuits for these operations therefore leads to more efficient implementations of the corresponding algorithms. In this paper, we develop new fault-tolerant quantum circuits for various integer division algorithms (both reversible and non-reversible). These circuits, when implemented in the Clifford+T gate set, achieve improvements in the asymptotic T-count and CNOT-count from O(n2)O(n^2)O(n2) to O(nm)O(nm)O(nm), and in the asymptotic T-depth from O(n2)O(n^2)O(n2) to O(nlog⁡m)O(n \log m)O(nlogm), where nnn and mmm are the bit lengths of the dividend and divisor, respectively. The qubit counts are significantly lower than those in previous works. We achieve this through careful modifications of the division algorithms and by expressing them in terms of a primitive we call COMP-N-SUB that compares two integers and conditionally subtracts them. We show that this primitive can be implemented at a cost, in terms of both Clifford and non-Clifford gates, comparable to that of one addition. By contrast, performing comparison and conditional subtraction separately would cost roughly as much as a controlled addition plus a regular addition.