Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2607.28873

Collimation of dense atomic beams by Swept Velocity Shelving

Francesca Fama, Benedikt Heizenreder, Ananya Sitaram, Camila Beli Silva, R. J. C. Spreeuw, Stefan Alaric Schäffer, Florian Schreck

Published Jul 30, 2026• 0 citations
arXivHTMLPDF

Abstract

Engineering continuous, high-flux, and collimated atomic beams is a useful resource for metrology and material deposition. Developments in this area have been essential for the evolution of cold-atom based quantum experiments, yet the ubiquitous balanced-force methods such as transverse molasses cooling degrade at high atomic flux due to absorption-induced force imbalance. We introduce a collimation scheme that combines the use of a broadband transition for velocity shifting with a narrowband transition for velocity selection, enabling velocity-selective beam collimation without relying on balanced-power counter-propagating beams. Collimated atoms are shelved in a long-lived internal state, reducing the total light scattering and providing a state-heralded collimated beam. Simulations using strontium as a model system show a highly effective collimation process that does not suffer from absorption-induced force-imbalance and experimental results agree well with these predictions.

DOI
10.48550/arxiv.2607.28873

Related papers

Continuous, dense, highly collimated sodium beam

W. DeGraffenreid, Jaime Ramirez-Serrano, Y.-M. Liu +1 more

We have developed a slow, highly collimated, and bright sodium atom beam suitable for orientation and alignment studies in cold collisions. A combination of transverse-optical collimation, longitudinal cooling, rapid decoupling from the longitudinal cooling cycle, and a final “optical-force extrusion” stage produces an atom density of 1×1010 cm−3 within a beam-divergence solid angle of 2×10−6 sr. Rapid Zeeman-cooler decoupling results in a narrow laboratory velocity distribution of 5 m/s full width at half maximum and a cold binary intrabeam collision temperature of 4 mK.

Review of Scientific Instruments•Oct 1, 2000•17 citations

Optical collimation of an atomic beam using a white light molasses

R. D. Glover, Thierry Bastin

We investigate optical collimation of an atomic beam using a spectrally broadened white light molasses. We compare this technique with the standard technique using an atomic collimator and find that, under certain conditions, the white light molasses is preferable. Specifically, a white light molasses is suitable for atomic beams with relatively low mean velocities and broad velocity distributions, for example, a beam effusing from a cryogenically cooled reservoir. This result is demonstrated by numerically modeling the atomic trajectories of argon atoms effusing from a cryogenically cooled reservoir. We find that, given sufficient power, a white light molasses captures a larger fraction of atoms when compared to an atomic collimator, and the velocity distribution of the resulting beam is shifted toward slower velocities. Further, an optical molasses is geometrically relatively simple compared to an atomic collimator; therefore, the complexity of the in-vacuum optical arrangement can be significantly reduced.

Journal of the Optical Society of America B•Apr 1, 2015•6 citations

A low velocity intense source of atoms

Zheng‐Tian Lu, Kristan L. Corwin, Michael J. Renn +3 more

The authors have demonstrated a new method of generating a slow, collimated atomic beam. In this experiment, 87Rb atoms were first collected into a standard MOT with six laser beams. One of the beams was blocked in the center by an opaque spot, causing an imbalance of light force in a column along the axis of this laser beam. Consequently, the atoms in the trap were pushed out along the axis and form a slow, collimated beam. This configuration uses atoms efficiently, because those atoms which leave the shadow of the opaque spot while inside the capture volume of the trap are recirculated. This scheme is a simple, cost-effective way of generating cold atomic beams for many experiments, fiber guiding of atoms, atomic interferometry, and transporting atoms in a double-MOT system.

Bulletin of the American Physical Society•May 1, 1996•0 citations

Continuous cold rubidium atomic beam with enhanced flux and tunable velocity

Shengzhe Wang, Zhixin Meng, Peiqiang Yan +2 more

We present a cold atomic beam source based on a two-dimensional (2D)+ magneto-optical trap (MOT), capable of generating a continuous cold beam of 87 Rb atoms with a flux up to 4.3 × 10 9 s -1 , a mean velocity of 10.96(2.20) m/s, and a transverse temperature of 16.90(1.56) µK. Investigating the influence of high cooling laser intensity, we observe a significant population loss of atoms to hyperfine-level dark states. To account for this, we employ a multiple hyperfine level model to calculate the cooling efficiency associated with the population in dark states, subsequently modifying the scattering force. Simulations of beam flux at different cooling and repumping laser intensities using the modified scattering force are in agreement with experimental results. Optimizing repumping and cooling intensities enhances the flux by 50%. The influence of phase modulation on both the pushing and cooling lasers is experimentally studied, revealing that the mean velocity of cold atoms can be tuned from 9.5 m/s to 14.6 m/s with a phase-modulated pushing laser. The versatility of this continuous beam source, featuring high flux, controlled velocity, and narrow transverse temperature, renders it valuable for applications in atom interferometers and clocks, ultimately enhancing bandwidth, sensitivity, and signal contrast in these devices.

arXiv:2312.12027•Optics Express•Jan 31, 2024•5 citations

Collimation of a rubidium beam below the Doppler limit

B. Sheehy, S-Q. Shang, Harold J. Metcalf +1 more

We have discovered a new cooling process that uses an applied magnetic field to mix differentially light shifted atomic ground state sublevels. In related experiments cooling is achieved by mixing caused by polarization gradients. Because the energy loss mechanism stems from the light shift and not the momentum transfer of a scattering event, the accessible temperature is much lower than the limit of Doppler cooling. We used this method for optical collimation of an 85Rb atomic beam to a transverse rms speed of 3 cm/s, well below the v = ( 7 ℏ γ / 20 M ) ≅ 10 cm / s of the Doppler limit for two-level atoms in this 1-D optical molasses. This low velocity, limited only by experimental geometry, is achieved only when a magnetic field of ~20 µT is applied perpendicular to the axis of the circularly polarized diode laser beam. We use a thermal beam of natural Rb produced by an oven at T ~ 150°C with an ~0.33-mm diam aperture and a defining aperture of ~0.33-mm diam about 24 cm away. The atoms are optically collimated by laser beams transverse to their motion that excite the transition at λ = 780 nm. The atomic beam profile is measured with a vertically oriented scanning hot tungsten wire, 25 µm in diameter, 1.3 m away.

Annual Meeting Optical Society of America•Jan 1, 1989•0 citations

Three-Dimensional Cooling of an Atom-Beam Source for High-Contrast Atom Interferometry

Jonathan M. Kwolek, Charles Fancher, Mark Bashkansky +1 more

We present a compact, two-stage atomic beam source that produces a continuous, narrow, collimated, and high-flux beam of rubidium atoms with sub-Doppler temperatures in three dimensions, which features very low emission of near-resonance fluorescence along the atomic trajectory. The atom-beam source originates in a pushed two-dimensional magneto-optical trap ($2{\mathrm{D}}^{+}$ MOT) feeding a slightly off-axis three-dimensional moving optical-molasses stage that continuously cools and redirects the atom beam. The capture velocity of the moving optical molasses is deliberately chosen to be low, approximately $3\phantom{\rule{0.2em}{0ex}}\mathrm{m}/\mathrm{s}$, to reduce fluorescence, and the cooling light is detuned by several atomic linewidths from resonance to reduce the absorption cross section of cooling-induced fluorescence. Near-resonance light from the $2{\mathrm{D}}^{+}$ MOT and the push beam does not propagate to the output atomic trajectory due to a ${10}^{\ensuremath{\circ}}$ bend in the atomic trajectory. The atomic beam emitted from the two-stage source has a flux up to $1.6(3)\ifmmode\times\else\texttimes\fi{}{10}^{9}\phantom{\rule{0.2em}{0ex}}\mathrm{atoms}/\mathrm{s}$, with an optimized temperature of $15.0(2)\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{K}$. We employ continuous Raman-Ramsey interference measurements at the atom-beam output to study the sources of decoherence in the presence of continuous cooling, and demonstrate that the atom-beam source effectively preserves high fringe contrast even during cooling. This cold-atom-beam source is appropriate for use in atom interferometers and clocks, where continuous operation eliminates dead time, the slow atom-beam velocity (6--16 m/s) improves sensitivity, the narrow 3D velocity distribution improves fringe contrast, and the low reabsorption of scattered light mitigates decoherence caused by the continuous cooling process.

arXiv:2004.01057•Physical Review Applied•Apr 22, 2020•30 citations
Engineering continuous, high-flux, and collimated atomic beams is a useful resource for metrology and material deposition. Developments in this area have been essential for the evolution of cold-atom based quantum experiments, yet the ubiquitous balanced-force methods such as transverse molasses cooling degrade at high atomic flux due to absorption-induced force imbalance. We introduce a collimation scheme that combines the use of a broadband transition for velocity shifting with a narrowband transition for velocity selection, enabling velocity-selective beam collimation without relying on balanced-power counter-propagating beams. Collimated atoms are shelved in a long-lived internal state, reducing the total light scattering and providing a state-heralded collimated beam. Simulations using strontium as a model system show a highly effective collimation process that does not suffer from absorption-induced force-imbalance and experimental results agree well with these predictions.
We have developed a slow, highly collimated, and bright sodium atom beam suitable for orientation and alignment studies in cold collisions. A combination of transverse-optical collimation, longitudinal cooling, rapid decoupling from the longitudinal cooling cycle, and a final “optical-force extrusion” stage produces an atom density of 1×1010 cm−3 within a beam-divergence solid angle of 2×10−6 sr. Rapid Zeeman-cooler decoupling results in a narrow laboratory velocity distribution of 5 m/s full width at half maximum and a cold binary intrabeam collision temperature of 4 mK.
We investigate optical collimation of an atomic beam using a spectrally broadened white light molasses. We compare this technique with the standard technique using an atomic collimator and find that, under certain conditions, the white light molasses is preferable. Specifically, a white light molasses is suitable for atomic beams with relatively low mean velocities and broad velocity distributions, for example, a beam effusing from a cryogenically cooled reservoir. This result is demonstrated by numerically modeling the atomic trajectories of argon atoms effusing from a cryogenically cooled reservoir. We find that, given sufficient power, a white light molasses captures a larger fraction of atoms when compared to an atomic collimator, and the velocity distribution of the resulting beam is shifted toward slower velocities. Further, an optical molasses is geometrically relatively simple compared to an atomic collimator; therefore, the complexity of the in-vacuum optical arrangement can be significantly reduced.
The authors have demonstrated a new method of generating a slow, collimated atomic beam. In this experiment, 87Rb atoms were first collected into a standard MOT with six laser beams. One of the beams was blocked in the center by an opaque spot, causing an imbalance of light force in a column along the axis of this laser beam. Consequently, the atoms in the trap were pushed out along the axis and form a slow, collimated beam. This configuration uses atoms efficiently, because those atoms which leave the shadow of the opaque spot while inside the capture volume of the trap are recirculated. This scheme is a simple, cost-effective way of generating cold atomic beams for many experiments, fiber guiding of atoms, atomic interferometry, and transporting atoms in a double-MOT system.
We present a cold atomic beam source based on a two-dimensional (2D)+ magneto-optical trap (MOT), capable of generating a continuous cold beam of 87 Rb atoms with a flux up to 4.3 × 10 9 s -1 , a mean velocity of 10.96(2.20) m/s, and a transverse temperature of 16.90(1.56) µK. Investigating the influence of high cooling laser intensity, we observe a significant population loss of atoms to hyperfine-level dark states. To account for this, we employ a multiple hyperfine level model to calculate the cooling efficiency associated with the population in dark states, subsequently modifying the scattering force. Simulations of beam flux at different cooling and repumping laser intensities using the modified scattering force are in agreement with experimental results. Optimizing repumping and cooling intensities enhances the flux by 50%. The influence of phase modulation on both the pushing and cooling lasers is experimentally studied, revealing that the mean velocity of cold atoms can be tuned from 9.5 m/s to 14.6 m/s with a phase-modulated pushing laser. The versatility of this continuous beam source, featuring high flux, controlled velocity, and narrow transverse temperature, renders it valuable for applications in atom interferometers and clocks, ultimately enhancing bandwidth, sensitivity, and signal contrast in these devices.
We have discovered a new cooling process that uses an applied magnetic field to mix differentially light shifted atomic ground state sublevels. In related experiments cooling is achieved by mixing caused by polarization gradients. Because the energy loss mechanism stems from the light shift and not the momentum transfer of a scattering event, the accessible temperature is much lower than the limit of Doppler cooling. We used this method for optical collimation of an 85Rb atomic beam to a transverse rms speed of 3 cm/s, well below the v = ( 7 ℏ γ / 20 M ) ≅ 10 cm / s of the Doppler limit for two-level atoms in this 1-D optical molasses. This low velocity, limited only by experimental geometry, is achieved only when a magnetic field of ~20 µT is applied perpendicular to the axis of the circularly polarized diode laser beam. We use a thermal beam of natural Rb produced by an oven at T ~ 150°C with an ~0.33-mm diam aperture and a defining aperture of ~0.33-mm diam about 24 cm away. The atoms are optically collimated by laser beams transverse to their motion that excite the transition at λ = 780 nm. The atomic beam profile is measured with a vertically oriented scanning hot tungsten wire, 25 µm in diameter, 1.3 m away.
We present a compact, two-stage atomic beam source that produces a continuous, narrow, collimated, and high-flux beam of rubidium atoms with sub-Doppler temperatures in three dimensions, which features very low emission of near-resonance fluorescence along the atomic trajectory. The atom-beam source originates in a pushed two-dimensional magneto-optical trap (2D+2{\mathrm{D}}^{+}2D+ MOT) feeding a slightly off-axis three-dimensional moving optical-molasses stage that continuously cools and redirects the atom beam. The capture velocity of the moving optical molasses is deliberately chosen to be low, approximately 3m/s3\phantom{\rule{0.2em}{0ex}}\mathrm{m}/\mathrm{s}3m/s, to reduce fluorescence, and the cooling light is detuned by several atomic linewidths from resonance to reduce the absorption cross section of cooling-induced fluorescence. Near-resonance light from the 2D+2{\mathrm{D}}^{+}2D+ MOT and the push beam does not propagate to the output atomic trajectory due to a ${10}^{\ensuremath{\circ}}$ bend in the atomic trajectory. The atomic beam emitted from the two-stage source has a flux up to $1.6(3)\ifmmode\times\else\texttimes\fi{}{10}^{9}\phantom{\rule{0.2em}{0ex}}\mathrm{atoms}/\mathrm{s}$, with an optimized temperature of $15.0(2)\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{K}$. We employ continuous Raman-Ramsey interference measurements at the atom-beam output to study the sources of decoherence in the presence of continuous cooling, and demonstrate that the atom-beam source effectively preserves high fringe contrast even during cooling. This cold-atom-beam source is appropriate for use in atom interferometers and clocks, where continuous operation eliminates dead time, the slow atom-beam velocity (6--16 m/s) improves sensitivity, the narrow 3D velocity distribution improves fringe contrast, and the low reabsorption of scattered light mitigates decoherence caused by the continuous cooling process.