Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2607.20143

Biased-noise qubits: a guide to efficient fault-tolerance using the hierarchy of errors

Diego Ruiz, Jérémie Guillaud, Christophe Vuillot, Mazyar Mirrahimi

quant-phSubmitted Jul 22, 2026• Announced Jul 23, 2026• 2 citations
arXivHTMLPDF

Abstract

Qubits with strongly biased noise, in which phase-flip errors are orders of magnitude more frequent than bit-flips, arise both naturally, as in electron and nuclear spins, and by engineering, as in stabilized cat qubits. This noise structure holds the promise of reducing the daunting hardware overhead of fault-tolerant quantum computing, but exploiting it requires physical operations that do not convert frequent phase-flips into rare bit-flips. In this review, we analyze the most prominent fault-tolerant protocols for biased-noise qubits, organized according to the available set of such bias-preserving operations. When this set is restricted to the CZ gate together with preparation and measurement in the X basis, we show that the complexity of the required syndrome extraction gadgets essentially cancels the benefit of the noise bias: at experimentally relevant error rates, one may as well ignore the bias and rely on standard error correction designed for depolarizing noise. The situation changes drastically when a bias-preserving CX gate is available: the hierarchy of errors can then be reflected in the structure of the code, with frequent phase-flips corrected by a dedicated high-threshold code and rare bit-flips by concatenation with a high-rate code. The same hierarchy also enables hardware-efficient preparation of magic states. Finally, as a bias-preserving CX is forbidden in naturally biased platforms and challenging in engineered ones, we present a measurement-based architecture in which a high-fidelity quantum non-demolition readout of multi-qubit Pauli Z operators takes its place, extending these overhead reductions to a much broader range of physical platforms.

Comments
27 pages, 26 figures

Related papers

Bias-preserving gates with stabilized cat qubits

Shruti Puri, Lucas St-Jean, Jonathan A. Gross +9 more

The code capacity threshold for error correction using biased-noise qubits is known to be higher than with qubits without such structured noise. However, realistic circuit-level noise severely restricts these improvements. This is because gate operations, such as a controlled-NOT (CX) gate, which do not commute with the dominant error, unbias the noise channel. Here, we overcome the challenge of implementing a bias-preserving CX gate using biased-noise stabilized cat qubits in driven nonlinear oscillators. This continuous-variable gate relies on nontrivial phase space topology of the cat states. Furthermore, by following a scheme for concatenated error correction, we show that the availability of bias-preserving CX gates with moderately sized cats improves a rigorous lower bound on the fault-tolerant threshold by a factor of two and decreases the overhead in logical Clifford operations by a factor of five. Our results open a path toward high-threshold, low-overhead, fault-tolerant codes tailored to biased-noise cat qubits.

arXiv:1905.00450•Science Advances•Aug 21, 2020•256 citations

Quantum non-demolition measurements as a practical primitive for fault-tolerant computation against biased noise

Christophe Vuillot, Diego Ruiz, Jérémie Guillaud +1 more

Leveraging noise bias, where phase-flip errors dominate over bit-flips, can drastically reduce the hardware overhead of fault-tolerant quantum computation, but existing approaches require bias-preserving CNOT gates whose implementation remains experimentally challenging and is provably impossible for strictly two-dimensional systems. We show that high-fidelity quantum non-demolition (QND) multi-qubit Pauli $Z$ measurements provide an equally powerful yet more accessible primitive. We demonstrate that such measurements can fully replace bias-preserving CNOT gates for compiling all operations required by bias-tailored error correction, including stabilizer measurements for repetition codes, XZZX surface codes, and LDPC codes. We propose concrete physical implementations of this primitive for two platforms: solid-state nuclear spins coupled to electron spin ancillas, and dissipatively stabilized superconducting cat qubits. Through circuit-level numerical simulations, we show that an asymmetric XZZX surface code implemented with weight-four QND $Z$ measurements achieves a phase-flip threshold of $\sim\!1.25\%$ and provides a qubit overhead reduction of up to $6\times$ compared to a bias-unaware surface code at noise bias $η= 10^4$. In the regime of very large bias, a repetition code with QND $Z$ measurements attains a threshold of $\sim\!2.3\%$ and achieves overhead comparable to that of a bias-preserving CNOT scheme, without requiring such a gate. Our results establish QND multi-$Z$ measurements as a practical and hardware-efficient route to fault-tolerant quantum computation for a broad class of biased-noise platforms.

quant-pharXiv:2605.24262•May 26, 2026•3 citations

Bias-preserving gates with stabilized cat qubits

Shruti Puri, Lucas St-Jean, Jonathan A. Gross +9 more

The code capacity threshold for error correction using biased-noise qubits is known to be higher than with qubits without such structured noise. However, realistic circuit-level noise severely restricts these improvements. This is because gate operations, such as a controlled-NOT (CX) gate, which do not commute with the dominant error, unbias the noise channel. Here, we overcome the challenge of implementing a bias-preserving CX gate using biased-noise stabilized cat qubits in driven nonlinear oscillators. This continuous-variable gate relies on nontrivial phase space topology of the cat states. Furthermore, by following a scheme for concatenated error correction, we show that the availability of bias-preserving CX gates with moderately sized cats improves a rigorous lower bound on the fault-tolerant threshold by a factor of two and decreases the overhead in logical Clifford operations by a factor of five. Our results open a path toward high-threshold, low-overhead, fault-tolerant codes tailored to biased-noise cat qubits.

•Aug 21, 2020•173 citations

Engineering Kerr-cat qubits for hardware efficient quantum error correction

Qian Xu, Harald Putterman, Joseph K. Iverson +4 more

Stabilized cat qubits that possess biased noise channel with bit-flip errors exponentially smaller than phase-flip errors. Together with a set of bias-preserving (BP) gates, cat qubits are a promising candidate for realizing hardware efficient quantum error correction and fault-tolerant quantum computing. Compared to dissipatively stabilized cat qubits, the Kerr cat qubits can in principle support faster gate operations with higher gate fidelity, benefiting from the large energy gap that protects the code space. However, the leakage of the Kerr cats can increase the minor type of errors and compromise the noise bias. Both the fast implementation of gates and the interaction with environment can lead to such detrimental leakage if no sophisticated controls are applied. In this work, we introduce new fine-control techniques to overcome the above obstacles for Kerr cat qubits. To suppress the gate leakage, we use the derivative-based transition suppression technique to design derivative-based controls for the Kerr BP gates. We show that the fine-controlled gates can simultaneously have high gate fidelity and high noise bias and when applied to concatenated quantum error correction, can not only improve the logical error rate but also reduce resource overhead. To suppress the environment-induced leakage, we introduce colored single-photon dissipation, which can continuously cool the Kerr cats and suppress the minor errors while not enhancing the major errors.

Quantum Computing, Communication, and Simulation•Mar 2, 2022•2 citations

Elevator Codes: Concatenation for resource-efficient quantum memory under biased noise

Peter Shanahan, Diego Ruiz

Biased-noise qubits, in which one type of error (e.g. $X$- and $Y$-type errors) is significantly suppressed relative to the other (e.g. $Z$-type errors), can significantly reduce the overhead of quantum error correction. Codes such as the rectangular surface code or XZZX code substantially reduce the qubit overhead under biased noise, but they still face challenges. The rectangular surface code suffers from a relatively low threshold, while the XZZX code requires twice as many physical qubits to maintain the same code distance as the surface code. In this work, we introduce a 2D local code construction that outperforms these codes for noise biases $η\ge 7\times10^{4}$, reducing the qubit overhead by over 50% at $p_Z=10^{-3}$ and $η= 2 \times 10^6$ to achieve a logical error rate of $10^{-12}$. Our construction relies on the concatenation of two classical codes. The inner codes are repetition phase-flip codes while the outer codes are high-rate bit-flip codes enabled by their implementation at the logical level, which circumvents device connectivity constraints. These results indicate that under sufficiently biased noise, it is advantageous to address phase-flip and bit-flip errors at different layers of the coding scheme. The inner code should prioritize a high threshold for phase-flip errors, while the bit-flip outer code should optimize for encoding rate efficiency. In the strong biased-noise regime, high-rate outer codes keep the overhead for correcting residual bit-flip errors comparable to that of the repetition code itself, meaningfully lower than that required by earlier approaches.

quant-pharXiv:2601.10786•Jan 19, 2026•7 citations

Dissipatively Stabilized 0-n Fock Qubits for Noise-Biased Quantum Computing

Su Direkci, Simon Lieu, Kyungjoo Noh +1 more

Noise-biased qubits have bit-flip errors that are exponentially suppressed relative to phase-flip errors, and offer a promising route toward fault-tolerant quantum computing. However, this bias can be compromised during gate operations with non-biased control qubits. To address this limitation, we propose a "0-n" Fock qubit architecture that maintains the noise bias by encoding information in the ground state and n-th excited state of a nonlinear multi-level system, such as a transmon. This encoding is achieved via a dissipative stabilization that acts as decay and gain for lower and upper intermediate levels, respectively. We first analytically demonstrate that bit-flip errors are exponentially suppressed with the number of levels. Then, we present a practical implementation using a multi-mode lossy filter to achieve the frequency-selective dissipation. Finally, we numerically demonstrate that bit-flip probabilities approaching $10^{-8}$ are achievable for controlled-X gates on cat qubits using the 0-n qubit as an ancilla with $n \geq 9$ (i.e. ten or more levels), for realistic experimental parameters. Building on this, we simulate syndrome extraction in a repetition code, achieving logical error rates in the megaquop regime with only a distance of $d=9$.

quant-pharXiv:2608.25959•Aug 27, 2026•1 citation
Qubits with strongly biased noise, in which phase-flip errors are orders of magnitude more frequent than bit-flips, arise both naturally, as in electron and nuclear spins, and by engineering, as in stabilized cat qubits. This noise structure holds the promise of reducing the daunting hardware overhead of fault-tolerant quantum computing, but exploiting it requires physical operations that do not convert frequent phase-flips into rare bit-flips. In this review, we analyze the most prominent fault-tolerant protocols for biased-noise qubits, organized according to the available set of such bias-preserving operations. When this set is restricted to the CZ gate together with preparation and measurement in the X basis, we show that the complexity of the required syndrome extraction gadgets essentially cancels the benefit of the noise bias: at experimentally relevant error rates, one may as well ignore the bias and rely on standard error correction designed for depolarizing noise. The situation changes drastically when a bias-preserving CX gate is available: the hierarchy of errors can then be reflected in the structure of the code, with frequent phase-flips corrected by a dedicated high-threshold code and rare bit-flips by concatenation with a high-rate code. The same hierarchy also enables hardware-efficient preparation of magic states. Finally, as a bias-preserving CX is forbidden in naturally biased platforms and challenging in engineered ones, we present a measurement-based architecture in which a high-fidelity quantum non-demolition readout of multi-qubit Pauli Z operators takes its place, extending these overhead reductions to a much broader range of physical platforms.
The code capacity threshold for error correction using biased-noise qubits is known to be higher than with qubits without such structured noise. However, realistic circuit-level noise severely restricts these improvements. This is because gate operations, such as a controlled-NOT (CX) gate, which do not commute with the dominant error, unbias the noise channel. Here, we overcome the challenge of implementing a bias-preserving CX gate using biased-noise stabilized cat qubits in driven nonlinear oscillators. This continuous-variable gate relies on nontrivial phase space topology of the cat states. Furthermore, by following a scheme for concatenated error correction, we show that the availability of bias-preserving CX gates with moderately sized cats improves a rigorous lower bound on the fault-tolerant threshold by a factor of two and decreases the overhead in logical Clifford operations by a factor of five. Our results open a path toward high-threshold, low-overhead, fault-tolerant codes tailored to biased-noise cat qubits.
Leveraging noise bias, where phase-flip errors dominate over bit-flips, can drastically reduce the hardware overhead of fault-tolerant quantum computation, but existing approaches require bias-preserving CNOT gates whose implementation remains experimentally challenging and is provably impossible for strictly two-dimensional systems. We show that high-fidelity quantum non-demolition (QND) multi-qubit Pauli ZZZ measurements provide an equally powerful yet more accessible primitive. We demonstrate that such measurements can fully replace bias-preserving CNOT gates for compiling all operations required by bias-tailored error correction, including stabilizer measurements for repetition codes, XZZX surface codes, and LDPC codes. We propose concrete physical implementations of this primitive for two platforms: solid-state nuclear spins coupled to electron spin ancillas, and dissipatively stabilized superconducting cat qubits. Through circuit-level numerical simulations, we show that an asymmetric XZZX surface code implemented with weight-four QND ZZZ measurements achieves a phase-flip threshold of ∼ ⁣1.25%\sim\!1.25\%∼1.25% and provides a qubit overhead reduction of up to 6×6\times6× compared to a bias-unaware surface code at noise bias η=104η= 10^4η=104. In the regime of very large bias, a repetition code with QND ZZZ measurements attains a threshold of ∼ ⁣2.3%\sim\!2.3\%∼2.3% and achieves overhead comparable to that of a bias-preserving CNOT scheme, without requiring such a gate. Our results establish QND multi-ZZZ measurements as a practical and hardware-efficient route to fault-tolerant quantum computation for a broad class of biased-noise platforms.
The code capacity threshold for error correction using biased-noise qubits is known to be higher than with qubits without such structured noise. However, realistic circuit-level noise severely restricts these improvements. This is because gate operations, such as a controlled-NOT (CX) gate, which do not commute with the dominant error, unbias the noise channel. Here, we overcome the challenge of implementing a bias-preserving CX gate using biased-noise stabilized cat qubits in driven nonlinear oscillators. This continuous-variable gate relies on nontrivial phase space topology of the cat states. Furthermore, by following a scheme for concatenated error correction, we show that the availability of bias-preserving CX gates with moderately sized cats improves a rigorous lower bound on the fault-tolerant threshold by a factor of two and decreases the overhead in logical Clifford operations by a factor of five. Our results open a path toward high-threshold, low-overhead, fault-tolerant codes tailored to biased-noise cat qubits.
Stabilized cat qubits that possess biased noise channel with bit-flip errors exponentially smaller than phase-flip errors. Together with a set of bias-preserving (BP) gates, cat qubits are a promising candidate for realizing hardware efficient quantum error correction and fault-tolerant quantum computing. Compared to dissipatively stabilized cat qubits, the Kerr cat qubits can in principle support faster gate operations with higher gate fidelity, benefiting from the large energy gap that protects the code space. However, the leakage of the Kerr cats can increase the minor type of errors and compromise the noise bias. Both the fast implementation of gates and the interaction with environment can lead to such detrimental leakage if no sophisticated controls are applied. In this work, we introduce new fine-control techniques to overcome the above obstacles for Kerr cat qubits. To suppress the gate leakage, we use the derivative-based transition suppression technique to design derivative-based controls for the Kerr BP gates. We show that the fine-controlled gates can simultaneously have high gate fidelity and high noise bias and when applied to concatenated quantum error correction, can not only improve the logical error rate but also reduce resource overhead. To suppress the environment-induced leakage, we introduce colored single-photon dissipation, which can continuously cool the Kerr cats and suppress the minor errors while not enhancing the major errors.
Biased-noise qubits, in which one type of error (e.g. XXX- and YYY-type errors) is significantly suppressed relative to the other (e.g. ZZZ-type errors), can significantly reduce the overhead of quantum error correction. Codes such as the rectangular surface code or XZZX code substantially reduce the qubit overhead under biased noise, but they still face challenges. The rectangular surface code suffers from a relatively low threshold, while the XZZX code requires twice as many physical qubits to maintain the same code distance as the surface code. In this work, we introduce a 2D local code construction that outperforms these codes for noise biases η≥7×104η\ge 7\times10^{4}η≥7×104, reducing the qubit overhead by over 50% at pZ=10−3p_Z=10^{-3}pZ​=10−3 and η=2×106η= 2 \times 10^6η=2×106 to achieve a logical error rate of 10−1210^{-12}10−12. Our construction relies on the concatenation of two classical codes. The inner codes are repetition phase-flip codes while the outer codes are high-rate bit-flip codes enabled by their implementation at the logical level, which circumvents device connectivity constraints. These results indicate that under sufficiently biased noise, it is advantageous to address phase-flip and bit-flip errors at different layers of the coding scheme. The inner code should prioritize a high threshold for phase-flip errors, while the bit-flip outer code should optimize for encoding rate efficiency. In the strong biased-noise regime, high-rate outer codes keep the overhead for correcting residual bit-flip errors comparable to that of the repetition code itself, meaningfully lower than that required by earlier approaches.
Noise-biased qubits have bit-flip errors that are exponentially suppressed relative to phase-flip errors, and offer a promising route toward fault-tolerant quantum computing. However, this bias can be compromised during gate operations with non-biased control qubits. To address this limitation, we propose a "0-n" Fock qubit architecture that maintains the noise bias by encoding information in the ground state and n-th excited state of a nonlinear multi-level system, such as a transmon. This encoding is achieved via a dissipative stabilization that acts as decay and gain for lower and upper intermediate levels, respectively. We first analytically demonstrate that bit-flip errors are exponentially suppressed with the number of levels. Then, we present a practical implementation using a multi-mode lossy filter to achieve the frequency-selective dissipation. Finally, we numerically demonstrate that bit-flip probabilities approaching 10−810^{-8}10−8 are achievable for controlled-X gates on cat qubits using the 0-n qubit as an ancilla with n≥9n \geq 9n≥9 (i.e. ten or more levels), for realistic experimental parameters. Building on this, we simulate syndrome extraction in a repetition code, achieving logical error rates in the megaquop regime with only a distance of d=9d=9d=9.