Monolithic three-dimensional (3D) Paul traps combine the high-precision microfabrication of two-dimensional (2D) chip traps with the deep trapping potentials and low heating rates characteristic of macroscopic 3D Paul traps, which are typically machined by traditional means and mechanically assembled. However, achieving low motional heating rates and optical access with a high numerical aperture (NA) while maintaining the high radio-frequency (RF) voltages required for trapping heavy ionic species, such as Yb
+ and Ba
+, remains a significant technical challenge. In this work, we present a fused-silica, monolithic segmented 3D Paul trap with an ion-electrode distance of 250
μm, and stable operation at high RF voltages. We benchmark the performance of the trap using Yb
+ ions, demonstrating axially homogeneous trapping potentials spanning over 200
μm about the axial center of the trap, high multi-directional optical access (up to 0.7 NA), and radial motional heating as low as $\dot{\bar n}=1.1 \pm 0.1 $ quanta/s at radial trap frequencies about 3 MHz near room temperature. Furthermore, we observe a motional Ramsey coherence time,
T2, of about 95 ms for the radial center-of-mass mode. We demonstrate the generation of a two-qubit Bell state with a parity contrast of
99.3−1.5+0.7% with state preparation and measurement correction. These results establish fused-silica monolithic 3D Paul traps as a scalable, modular platform for quantum simulation, computation, metrology, and networking with heavy ionic species.
We report a 3D-printed microwave-resonator Paul trap that operates at the GHz frequencies required for electron confinement while preserving an open geometry suitable for laser access and imaging ion Coulomb crystals. The resonator exhibits moderate quality factors of approximately 1000, enabling large confining electric-field amplitudes at low input power, and is in good agreement with finite-element-method (FEM) predictions despite manufacturing imperfections, which we experimentally characterize. The validated FEM model is then used to calculate the electromagnetic fields in the trapping region. These field distributions, together with surface-roughness measurements, are incorporated into a model of electron spin-qubit decoherence to estimate the coherence time. Our analysis predicts that electron spin-qubit coherence times on the order of 10 ms should be achievable under the assumption that motional heating is dominated by Johnson noise, making such systems relevant for quantum information processing. The method of obtaining the coherence time is applicable to any electron Paul trap.
Linear radio-frequency quadrupole (RFQ) traps are crucial for ion and phase-space manipulation across diverse physics platforms, including quantum information processing, precision atomic spectroscopy, and high-resolution mass or laser spectrometry. We present the design, electrostatic field optimization, and performance characterization of a scalable, multi-layer printed circuit board (PCB) linear RFQ trap. By utilizing a PCB-based "stacked-electrode" geometry to generate high-quality quadrupolar fields, this architecture suppresses higher-order multipole field components by up to an order of magnitude compared to planar "flat surface-electrode" designs and allows for reclaiming up to 60% of the radial pseudopotential-well depth of an ideal hyperbolic quadrupole. Following a thorough optimisation and characterization using both simulations and experiments, we demonstrate its suitability as a cooler buncher, showing rapid helium buffer-gas cooling with time constants between 34 +/- 3 us and 412 +/- 23 us, and achieving a highly compressed longitudinal phase-space emittance of only 58 +/- 4 eV*ns. The low beam emittance provides flexible control of the extracted bunch properties: weak extraction fields yield energy spreads down to 2.5 +/- 0.4 eV, whereas strong fields produce ultra-narrow temporal widths down to 2.6 +/- 0.3 ns. The results establish our PCB-RFQ platform as a versatile, scalable, and cost-effective alternative to traditionally machined rod-based RFQ assemblies for advanced ion-trapping, beam-preparation, or quantum applications.
We demonstrate trapping of electrons in a millimeter-sized quadrupole Paul trap driven at 1.6 GHz in a room-temperature ultrahigh vacuum setup.Cold electrons are introduced into the trap by ionization of atomic calcium via Rydberg states and stay confined by microwave and static electric fields for several tens of milliseconds.A fraction of these electrons remain trapped longer and show no measurable loss for measurement times up to a second.Electronic excitation of the motion reveals secular frequencies that can be tuned over a range of several tens to hundreds of MHz.Operating a similar electron Paul trap in a cryogenic environment may provide a platform for all-electric quantum computing with trapped electron spin qubits.
We describe the construction and operation of a segmented linear Paul trap, fabricated in printed-circuit-board technology with an electrode segment width of 500 μm. We prove the applicability of this technology to reliable ion trapping and report the observation of Doppler-cooled ion crystals of 40 Ca + with this kind of trap. Measured trap frequencies agree with numerical simulations at the level of a few percent from which we infer a high fabrication accuracy of the segmented trap. To demonstrate its usefulness and versatility for trapped ion experiments we study the fast transport of a single ion. Our experimental results show a success rate of 99.0(1)% for a transport distance of 2 × 2 mm in a round-trip time of T = 20 μs, which corresponds to 4 axial oscillations only. We theoretically and experimentally investigate the excitation of oscillations caused by fast ion transports with error-function voltage ramps: for a slightly slower transport (a round-trip shuttle within T = 30 μs) we observe non-adiabatic motional excitation of 0.89(15) meV.