Thermally charged quantum batteries provide a stable and easy-to-have energy resource, but remain passive and therefore do not allow useful energy extraction on demand via unitary operations. We introduce a time-dependent stirring protocol that activates a thermally charged quantum battery through a time-dependent coupling to an auxiliary activator, thereby generating correlations that drive the battery into an active state. Accounting explicitly for the energetic cost of the stirring process, the entropic cost of correlation generation and the activation time, we derive bounds on the maximal net extractable energy. Incorporating projective measurement on the activator and exploiting the information gained through the measurement further enhances the extractable energy. As an experimentally relevant example, we analyze a waveguide-QED setup where a harmonic-oscillator battery (waveguide) is stirred and monitored by a two-level system. We characterize the performance of the protocol in terms of net extractable energy (net ergotropy) and power output.
Thermally charged quantum batteries provide a stable and easy-to-have energy resource, but remain passive and therefore do not allow useful energy extraction on demand via unitary operations. We introduce a time-dependent stirring protocol that activates a thermally charged quantum battery through a time-dependent coupling to an auxiliary activator, thereby generating correlations that drive the battery into an active state. Accounting explicitly for the energetic cost of the stirring process, the entropic cost of correlation generation and the activation time, we derive bounds on the maximal net extractable energy. Incorporating projective measurement on the activator and exploiting the information gained through the measurement further enhances the extractable energy. As an experimentally relevant example, we analyze a waveguide-QED setup where a harmonic-oscillator battery (waveguide) is stirred and monitored by a two-level system. We characterize the performance of the protocol in terms of net extractable energy (net ergotropy) and power output.
Abstract The reduced state of a small system strongly coupled to a charger in thermal equilibrium may be athermal and used as a small battery once disconnected. By harnessing the battery-charger correlations, the battery’s extractable energy can increase above the ergotropy. We introduce a protocol that uses a quantum system as a memory that measures the charger and leaves the battery intact in its charged state. Using the information gained from the measurement, the daemonic ergotropy of the battery is extracted. Then the battery is reconnected to the charger, thermalizing and charging it. However, the memory should return to its initial standard state to close the thermodynamic cycle. Thus, on the one hand, the work cost of the cycle is the sum of the disconnecting and reconnecting battery-charger work plus the measurement and erasure work. On the other hand, the extracted energy is the daemonic ergotropy of the battery plus the ergotropy of the memory. The ratio of these quantities defines the efficiency of the cycle. The protocol is exemplified by a modified transverse spin 1/2 Ising chain, one spin functioning as the battery and the others as the charger. The memory is another auxiliary spin 1/2. We found pairs of measurement schemes from which we extract the same daemonic ergotropy from the battery, they dissipate the same amount of energy, and one leaves the memory in an active state, the other in a passive state. We study the memory’s ergotropy and the daemonic ergotropy of the battery. We find that with measurements, the efficiency can surpass that of the unmeasured protocol, given conditions on temperature, coupling, and choice of the measurement operators.
Quantum batteries can exploit quantum resources to enhance energy storage and work extraction, and recent experimental progress has brought their implementation closer to reality. In realistic settings, however, environmental dissipation is unavoidable, making dissipative charging a physically relevant operating regime. Here we investigate ergotropy in dissipatively charged quantum batteries, focusing on interaction-induced work extraction. For two coupled two-level systems (TLSs), we derive exact analytical expressions for the total, coherent, and incoherent ergotropy in both resonant and detuned configurations. We show that, in the resonant case, ergotropy is activated only above a critical coupling associated with an interaction-induced energy-level crossing, whereas detuning enables ergotropy already in the weak-coupling regime. Moreover, quantum coherence, although necessary for coherent work extraction, is not by itself sufficient to guarantee nonzero coherent ergotropy. In the strong-coupling regime, the resonant setup reaches the maximum ergotropy at a finite coupling strength, whereas the detuned setup approaches the same limit only asymptotically. Extending the analysis to a periodic XX spin chain of N TLSs, we analytically derive the finite-temperature coupling threshold for ergotropy activation and show that it scales as 1/N in the large-N limit. These results identify frequency detuning, interaction strength, and system size as key control parameters for ergotropy generation in open quantum batteries.
Continuous-variable quantum batteries provide a viable platform for microscopic energy storage, yet environmental dissipation typically degrades both their charging efficiency and extractable work (ergotropy). In this work, we investigate the charging dynamics of an open continuous-variable quantum battery modeled as coupled harmonic oscillators driven by counter-diabatic (CD) protocols in the presence of a Markovian thermal reservoir. Using Williamson's theorem to track the Gaussian state evolution, we show that CD driving significantly enhances ergotropy compared to conventional unassisted driving. Specifically, in the underdamped regime, the CD protocol boosts the peak ergotropy while suppressing thermal degradation. In the overdamped regime, where conventional unassisted charging fails due to rapid thermal dissipation, the CD protocol maintains a robust, non-zero ergotropy. Furthermore, by evaluating the temporal fluence of the auxiliary control fields, we assess the energetic cost and confirm that these thermodynamic advantages are achieved with physically realistic control overheads. These results indicate that counter-diabatic driving provides a practical route to decoherence-resilient quantum energy storage.
We show that a cyclic unitary process can extract work from the thermodynamic equilibrium state of an engineered quantum dissipative process. Systems in the equilibrium states of these processes serve as batteries, storing energy. The dissipative process that brings the battery to the active equilibrium state is driven by an agent that couples the battery to thermal systems. The second law of thermodynamics imposes a work cost for the process; however, no work is needed to keep the battery in that charged state. We consider simple examples of these batteries and discuss situations in which the charged state has full population inversion, in which case the extractable work is maximal, and circumstances in which the efficiency of the process is maximal.
Harnessed nonclassical resources to enhance the performance of quantum batteries is an important goal of quantum technology. In this work, we investigate multi-emitter batteries coupled to a one-dimensional waveguide driven by a broadband squeezed-vacuum reservoir, and determine how the waveguide geometry controls the battery performance and and their thermodynamic features. We show that for a single emitter, the squeezed reservoir deposits finite energy while the state remains passive, yielding zero ergotropy. For two emitters, however, phase-sensitive reservoir correlations generate coherence and can drive the steady state into a fully nonpassive regime. For three emitters, collective thermal dynamics already supports finite ergotropy, while squeezing further increases the extractable component of the stored energy. Crucially, because the collective and phase-sensitive couplings depend on the emitter positions, geometry provides direct control over the nonclassical correlations and, consequently, over the nonpassivity of the steady state. The ergotropy can therefore be strongly modulated while the stored energy changes only weakly, and in the two-emitter configuration geometry alone can switch the battery between a passive steady state and one in which all stored energy is unitarily extractable.
Decoherence and dissipation in open quantum systems generally drive quantum batteries toward passive states, thereby reducing their extractable work (ergotropy). Here, we study a driven qubit quantum battery coherently coupled to an auxiliary harmonic oscillator in the presence of dephasing and dissipation. Using the differential formulation of the first law of open quantum thermodynamics, we analyze the local energy-flow dynamics during the charging process. We find that the auxiliary oscillator induces a transient negative local energy current into the qubit subsystem, corresponding to a temporary inward energy backflow. This transient energy redistribution is accompanied by an enhancement of the qubit ergotropy and a partial suppression of decoherence-induced passivation. Moreover, the parameter regime exhibiting a more pronounced negative-current interval is consistently correlated with larger ergotropy enhancement. Our results suggest that transient inward energy flow provides a useful thermodynamic signature associated with enhanced energy storage in open quantum batteries.