Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2607.12118

Error correction on an array of superconducting qubits with defective components

Julien M. Drouet, Xanda C. Kolesnikow, Campbell K. McLauchlan, Georgia M. Nixon, Seok-Hyung Lee, Dominic J. Williamson, Stephen D. Bartlett, Benjamin J. Brown, Robin Harper

quant-phSubmitted Jul 13, 2026• Announced Jul 15, 2026• 10 citations
arXivHTMLPDF

Abstract

A solid-state quantum-computing architecture will require the fabrication of arrays of many coupled qubits. It is inevitable that this process will produce qubits and couplers with varying performance, with some components underperforming due to imperfect fabrication. Quantum error-correction requires high-performing components and hence these defects must be dealt with, either by adapting the code to exclude the defects, or by informing the decoder to accommodate defects in post-processing. Here we implement and compare strategies to operate distance-5 surface codes on a quantum processor consisting of a square-lattice array of 120 superconducting qubits. We demonstrate a dramatic reduction in the probability of a logical error in a memory experiment by excluding underperforming components, compared with both a standard approach of ignoring defects, and a defect-aware decoding approach. We observe up to 2.8X improvement in logical errors per round when excluding defects compared with the standard defect-ignorant approach (1.62% compared to 4.49%). In contrast, defect-aware decoding gives only modest gains. Defects are also expected to be particularly harmful for measurement-based logical operations. Using a stability experiment we show that excluding defects resurrects measurement-based logic gate performance, observing a 6.3% per-round suppression of failure rate when excluding defects, compared to zero suppression otherwise. Furthermore, we show a further substantial decrease in logical errors when using leakage post-selection in combination with our defect exclusion strategies, resulting in a distance-5 code outperforming the best distance-3 in one basis. Our experiments therefore give a proof-of-principle demonstration of the essential utility of defect exclusion methods in the scale-up of solid-state quantum computing approaches.

Comments
11 pages + 5 page appendix, 10 figures, comments welcome

Related papers

Error-Corrected Memory and Logic on a Heavy-Hex Superconducting-Qubit Processor

Campbell K. McLauchlan, Georgia M. Nixon, Julien M. Drouet +7 more

Large quantum computations require high-fidelity error-corrected memory and fault-tolerant logical operations. To achieve these with superconducting circuits, quantum processors will need many components operating with low error rates. In practice, fabrication of monolithic superconducting devices produces unavoidable heterogeneity in component performance, which the quantum computer must accommodate. We implement strategies to operate a large dynamic compass code on an array of 156 superconducting qubits arranged on a heavy-hexagonal lattice, making use of the entire monolithic quantum processor and redesigning our measurement schedule to exclude underperforming components. We demonstrate improvements of up to $35\%$ in logical error probabilities for a memory experiment by using a noise-informed decoder combined with strategies to exclude the worst-performing qubits and couplers, along with post-selecting on shots with a low probability of leakage errors. In addition to these memory results, we also observe performance gains of up to $56\%$ when these strategies are applied to measurement-based logic, demonstrated by stability experiments. We furthermore demonstrate high-fidelity fault-tolerant logic through lattice surgery. Through pre-selection filtering techniques, we can obtain Bell fidelities above $77\%$, and further logical gap post-selection using exclusive decoding increases these fidelities to above $97\%$. Our experiments demonstrate that high performance can be maintained in key elements of fault-tolerant quantum memory and logic when working on monolithic superconducting quantum processors with underperforming components, by using a suite of noise-informed quantum error correction strategies.

quant-pharXiv:2610.11658•Oct 9, 2026•1 citation

Demonstration of Logical Error Suppression in a Surface Code Memory on a Cloud-Accessible IBM Superconducting Processor

Shuwen Kan, Aaron Hoyt, Sean Garner +8 more

Quantum error correction can suppress logical errors exponentially with code distance when physical noise is below threshold. Realizing this on hardware requires tight coordination among quantum gates, mid-circuit measurements, and qubit coherence. Device variation, noise asymmetry, and correlations across space and time complicate the translation of these capabilities into logical error suppression. Here, we study rotated surface-code memory on an IBM Nighthawk r2 processor. Performance varies across tested processor placements, which we attribute to differences in qubit quality. We optimize the code by combining short readout, fused measurement and reset, and an XX echo on data qubits during ancilla readout. Compared with standard readout without reset or echo, the optimized syndrome extraction circuit reduces the median per-round logical error rate by factors of 3.8 in the X basis and 1.4 in the Z basis. In memory experiments of up to 150 rounds, the distance advantage weakens, alongside long-lived correlations that may reflect a persistent error component. Under our optimization recipe, increasing the protected distance from 3 to 6 while holding the other distance fixed reduces the per-round logical error rate from 0.53% to 0.24% in Z memory and from 0.52% to 0.22% in X memory. The corresponding error-suppression factors under maximum-likelihood decoding are 1.68 and 1.85. These results connect circuit compilation and optimization to surface-code memory performance and limitations, and motivate QPU and QEC circuit codesign for fault-tolerant quantum computing primitives on current cloud hardware.

quant-pharXiv:2610.23840•Oct 19, 2026•2 citations

Suppressing quantum errors by scaling a surface code logical qubit

Google Quantum AI, Rajeev Acharya, I. L. Aleǐner +97 more

Abstract Practical quantum computing will require error rates well below those achievable with physical qubits. Quantum error correction 1,2 offers a path to algorithmically relevant error rates by encoding logical qubits within many physical qubits, for which increasing the number of physical qubits enhances protection against physical errors. However, introducing more qubits also increases the number of error sources, so the density of errors must be sufficiently low for logical performance to improve with increasing code size. Here we report the measurement of logical qubit performance scaling across several code sizes, and demonstrate that our system of superconducting qubits has sufficient performance to overcome the additional errors from increasing qubit number. We find that our distance-5 surface code logical qubit modestly outperforms an ensemble of distance-3 logical qubits on average, in terms of both logical error probability over 25 cycles and logical error per cycle ((2.914 ± 0.016)% compared to (3.028 ± 0.023)%). To investigate damaging, low-probability error sources, we run a distance-25 repetition code and observe a 1.7 × 10 −6 logical error per cycle floor set by a single high-energy event (1.6 × 10 −7 excluding this event). We accurately model our experiment, extracting error budgets that highlight the biggest challenges for future systems. These results mark an experimental demonstration in which quantum error correction begins to improve performance with increasing qubit number, illuminating the path to reaching the logical error rates required for computation.

arXiv:2207.06431•Nature•Feb 22, 2023•1,354 citations

Surface code logical operations on a superconducting quantum processor

Weiping Lin, Shaojun Guo, Yuwei Ma +144 more

Fault-tolerant quantum computation requires logical operations that manipulate encoded information while preserving quantum error-correction protection. In planar surface-code architectures, code deformation and lattice surgery provide a local, measurement-based route to such operations. Here we experimentally realize key elements of patch-based surface-code logical processing on a 107-qubit superconducting quantum processor. We first implement a reusable primitive layer comprising merge and split, patch expansion and shrinkage, and deformations mediated by domain walls and twist defects. We then compose these primitives to realize logical state routing, the logical controlled-NOT gate, and the single-qubit Hadamard and phase gates, which together form a Clifford-generating set. All operations are implemented on distance-three rotated surface-code patches with multi-round syndrome extraction and neural-network decoding, without post-selection. Our results advance superconducting surface-code experiments from protected logical memory to active, patch-based fault-tolerant logical operations.

quant-pharXiv:2607.01473•Jul 3, 2026•9 citations

X-Z Round Scheduling for the Surface Code with Defects under Biased Noise

Lakshika Rathi, Pau Escofet, Joshua Viszlai +1 more

Fault-tolerant Quantum Computing (FTQC) relies on Quantum Error Correction (QEC) codes that encode logical qubits across many physical qubits to detect and correct errors. The surface code is among the most widely studied codes due to its high error threshold, the existence of efficient decoders, and hardware-friendly properties: a planar, two-dimensional layout with nearest-neighbor connectivity. In practice, however, the fabrication of solid-state quantum processors introduces hardware defects, resulting in defective qubits and couplers that must be discarded. Adapting the surface code to these defects often requires measuring the $X$- and $Z$-type checks in separate rounds rather than simultaneously. In this work, we investigate the optimal $X$-to-$Z$ checks round-scheduling ratio under biased noise systems. Our results characterize how key architectural parameters, such as noise bias, code distance, and defect rate, impact the logical error rate. We provide insights into how to determine the optimal scheduling ratio directly from device calibration data, enabling manufacturers to maximize performance without extensive simulations. Our approach reduces the logical error rate by up to $4.25\times$ at a $1\%$ defect rate and up to $8.46\times$ at a $2\%$ defect rate for a distance-$13$ surface code under moderately biased noise. Furthermore, we demonstrate that the benefits of round-scheduling extend beyond the defective-hardware setting. In biased-noise architectures subject to CNOT crosstalk, separating $X$ and $Z$ measurement rounds yields up to $4.5\times$ reduction in logical error rate.

quant-pharXiv:2608.05518•Aug 7, 2026•1 citation

Quantum error correction below the surface code threshold

Google Quantum AI and Collaborators, Rajeev Acharya, Dmitry A. Abanin +97 more

Quantum error correction [1, 2, 3, 4] provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. Here, we present two below-threshold surface code memories on our newest generation of superconducting processors, Willow: a distance-7 code, and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of $$\varLambda \mathrm{=2.14}\pm 0.02$$ when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% ± 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit’s lifetime by a factor of $$2.4\pm 0.3$$ . Our system maintains below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. We also run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or $$3$$ $$\times $$ $${10}^{9}$$ cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.

arXiv:2408.13687•Nature•Dec 9, 2024•1,314 citations
A solid-state quantum-computing architecture will require the fabrication of arrays of many coupled qubits. It is inevitable that this process will produce qubits and couplers with varying performance, with some components underperforming due to imperfect fabrication. Quantum error-correction requires high-performing components and hence these defects must be dealt with, either by adapting the code to exclude the defects, or by informing the decoder to accommodate defects in post-processing. Here we implement and compare strategies to operate distance-5 surface codes on a quantum processor consisting of a square-lattice array of 120 superconducting qubits. We demonstrate a dramatic reduction in the probability of a logical error in a memory experiment by excluding underperforming components, compared with both a standard approach of ignoring defects, and a defect-aware decoding approach. We observe up to 2.8X improvement in logical errors per round when excluding defects compared with the standard defect-ignorant approach (1.62% compared to 4.49%). In contrast, defect-aware decoding gives only modest gains. Defects are also expected to be particularly harmful for measurement-based logical operations. Using a stability experiment we show that excluding defects resurrects measurement-based logic gate performance, observing a 6.3% per-round suppression of failure rate when excluding defects, compared to zero suppression otherwise. Furthermore, we show a further substantial decrease in logical errors when using leakage post-selection in combination with our defect exclusion strategies, resulting in a distance-5 code outperforming the best distance-3 in one basis. Our experiments therefore give a proof-of-principle demonstration of the essential utility of defect exclusion methods in the scale-up of solid-state quantum computing approaches.
Large quantum computations require high-fidelity error-corrected memory and fault-tolerant logical operations. To achieve these with superconducting circuits, quantum processors will need many components operating with low error rates. In practice, fabrication of monolithic superconducting devices produces unavoidable heterogeneity in component performance, which the quantum computer must accommodate. We implement strategies to operate a large dynamic compass code on an array of 156 superconducting qubits arranged on a heavy-hexagonal lattice, making use of the entire monolithic quantum processor and redesigning our measurement schedule to exclude underperforming components. We demonstrate improvements of up to 35%35\%35% in logical error probabilities for a memory experiment by using a noise-informed decoder combined with strategies to exclude the worst-performing qubits and couplers, along with post-selecting on shots with a low probability of leakage errors. In addition to these memory results, we also observe performance gains of up to 56%56\%56% when these strategies are applied to measurement-based logic, demonstrated by stability experiments. We furthermore demonstrate high-fidelity fault-tolerant logic through lattice surgery. Through pre-selection filtering techniques, we can obtain Bell fidelities above 77%77\%77%, and further logical gap post-selection using exclusive decoding increases these fidelities to above 97%97\%97%. Our experiments demonstrate that high performance can be maintained in key elements of fault-tolerant quantum memory and logic when working on monolithic superconducting quantum processors with underperforming components, by using a suite of noise-informed quantum error correction strategies.
Quantum error correction can suppress logical errors exponentially with code distance when physical noise is below threshold. Realizing this on hardware requires tight coordination among quantum gates, mid-circuit measurements, and qubit coherence. Device variation, noise asymmetry, and correlations across space and time complicate the translation of these capabilities into logical error suppression. Here, we study rotated surface-code memory on an IBM Nighthawk r2 processor. Performance varies across tested processor placements, which we attribute to differences in qubit quality. We optimize the code by combining short readout, fused measurement and reset, and an XX echo on data qubits during ancilla readout. Compared with standard readout without reset or echo, the optimized syndrome extraction circuit reduces the median per-round logical error rate by factors of 3.8 in the X basis and 1.4 in the Z basis. In memory experiments of up to 150 rounds, the distance advantage weakens, alongside long-lived correlations that may reflect a persistent error component. Under our optimization recipe, increasing the protected distance from 3 to 6 while holding the other distance fixed reduces the per-round logical error rate from 0.53% to 0.24% in Z memory and from 0.52% to 0.22% in X memory. The corresponding error-suppression factors under maximum-likelihood decoding are 1.68 and 1.85. These results connect circuit compilation and optimization to surface-code memory performance and limitations, and motivate QPU and QEC circuit codesign for fault-tolerant quantum computing primitives on current cloud hardware.
Abstract Practical quantum computing will require error rates well below those achievable with physical qubits. Quantum error correction 1,2 offers a path to algorithmically relevant error rates by encoding logical qubits within many physical qubits, for which increasing the number of physical qubits enhances protection against physical errors. However, introducing more qubits also increases the number of error sources, so the density of errors must be sufficiently low for logical performance to improve with increasing code size. Here we report the measurement of logical qubit performance scaling across several code sizes, and demonstrate that our system of superconducting qubits has sufficient performance to overcome the additional errors from increasing qubit number. We find that our distance-5 surface code logical qubit modestly outperforms an ensemble of distance-3 logical qubits on average, in terms of both logical error probability over 25 cycles and logical error per cycle ((2.914 ± 0.016)% compared to (3.028 ± 0.023)%). To investigate damaging, low-probability error sources, we run a distance-25 repetition code and observe a 1.7 × 10 −6 logical error per cycle floor set by a single high-energy event (1.6 × 10 −7 excluding this event). We accurately model our experiment, extracting error budgets that highlight the biggest challenges for future systems. These results mark an experimental demonstration in which quantum error correction begins to improve performance with increasing qubit number, illuminating the path to reaching the logical error rates required for computation.
Fault-tolerant quantum computation requires logical operations that manipulate encoded information while preserving quantum error-correction protection. In planar surface-code architectures, code deformation and lattice surgery provide a local, measurement-based route to such operations. Here we experimentally realize key elements of patch-based surface-code logical processing on a 107-qubit superconducting quantum processor. We first implement a reusable primitive layer comprising merge and split, patch expansion and shrinkage, and deformations mediated by domain walls and twist defects. We then compose these primitives to realize logical state routing, the logical controlled-NOT gate, and the single-qubit Hadamard and phase gates, which together form a Clifford-generating set. All operations are implemented on distance-three rotated surface-code patches with multi-round syndrome extraction and neural-network decoding, without post-selection. Our results advance superconducting surface-code experiments from protected logical memory to active, patch-based fault-tolerant logical operations.
Fault-tolerant Quantum Computing (FTQC) relies on Quantum Error Correction (QEC) codes that encode logical qubits across many physical qubits to detect and correct errors. The surface code is among the most widely studied codes due to its high error threshold, the existence of efficient decoders, and hardware-friendly properties: a planar, two-dimensional layout with nearest-neighbor connectivity. In practice, however, the fabrication of solid-state quantum processors introduces hardware defects, resulting in defective qubits and couplers that must be discarded. Adapting the surface code to these defects often requires measuring the XXX- and ZZZ-type checks in separate rounds rather than simultaneously. In this work, we investigate the optimal XXX-to-ZZZ checks round-scheduling ratio under biased noise systems. Our results characterize how key architectural parameters, such as noise bias, code distance, and defect rate, impact the logical error rate. We provide insights into how to determine the optimal scheduling ratio directly from device calibration data, enabling manufacturers to maximize performance without extensive simulations. Our approach reduces the logical error rate by up to 4.25×4.25\times4.25× at a 1%1\%1% defect rate and up to 8.46×8.46\times8.46× at a 2%2\%2% defect rate for a distance-131313 surface code under moderately biased noise. Furthermore, we demonstrate that the benefits of round-scheduling extend beyond the defective-hardware setting. In biased-noise architectures subject to CNOT crosstalk, separating XXX and ZZZ measurement rounds yields up to 4.5×4.5\times4.5× reduction in logical error rate.
Quantum error correction [1, 2, 3, 4] provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. Here, we present two below-threshold surface code memories on our newest generation of superconducting processors, Willow: a distance-7 code, and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of Λ=2.14±0.02\varLambda \mathrm{=2.14}\pm 0.02Λ=2.14±0.02 when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% ± 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit’s lifetime by a factor of 2.4±0.32.4\pm 0.32.4±0.3 . Our system maintains below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. We also run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or 333 ×\times × 109{10}^{9}109 cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.