Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2606.31833

Lazy-Move Compilation for Neutral-Atom Quantum Computers via a Buffer-Relay Fabric

Chen Huang, Jingbo Wang, Zhemin Zhang, Ming Zhong, Zhuo Fu, Zhiding Liang, Yuan Sun, Dong E. Liu

quant-phcs.ARSubmitted Jun 30, 2026• Announced Jul 1, 2026• 1 citation
arXivHTMLPDF

Abstract

Neutral atom quantum computing offers strong scalability and flexible qubit connectivity, but most existing compilation flows rely on reconfigurable atom arrays that physically shuttle qubit atoms during execution. Although this approach improves connectivity, it also introduces handoff errors, motional heating, and atom-loss risks that can degrade overall fidelity. We present BRIDGE, a Buffer-Relay Interconnect for Data-stable Gate Execution that co-designs a static, compiler-managed buffer-relay fabric with a lazy-move compiler that exploits it. BRIDGE targets an optimized, dual-species 2D interleaved atom array, using non-encoding ``buffer atoms'' to mediate long-range interactions in the fixed baseline and introducing limited data motion only for selected hotspots. By using calibrated heteronuclear and homonuclear Rydberg channels, BRIDGE realizes a static routing backbone in which data-buffer and buffer-buffer interactions are enabled while residual data-data crosstalk is suppressed. Across a 22-circuit matched benchmark suite re-estimated under a single shared error model, BRIDGE attains a geometric-mean $\sim$10$\times$ higher total fidelity than ZAP and $\sim$16$\times$ than Enola, together with $\sim$540$\times$ and $\sim$1000$\times$ lower circuit execution time, respectively, while reducing data-atom movement from thousands of transport events to zero.

Comments
18 pages, 17 figures

Related papers

Fault-tolerant quantum computation with static atomic buses

Matteo Bergonzoni, Laura Pecorari, Sam Norrell +3 more

Efficient quantum error correction and fault-tolerant quantum computing require scalable, high-fidelity long-range connectivity. In neutral-atom quantum computers, this is commonly achieved through atom transport, but shuttling introduces latency and motional heating that worsen with system size. Here, we introduce a neutral-atom architecture based on static atomic buses, in which auxiliary mediator atoms enable long-range entangling operations without qubit transport. The architecture naturally supports long-range stabilizer measurements in high-rate LDPC codes and transversal logical gates between neighboring surface-code patches, enabling a modular framework for efficient logical memories, Clifford computation, and magic-state distillation. To realize these capabilities, we co-design optimal-control protocols for bus-mediated controlled-Z gates that incorporate both microscopic neutral-atom dynamics and architectural constraints. We obtain smooth bus-mediated gates with fidelities approaching 99.9% and durations of a few hundred nanoseconds by combining time-optimal control with interaction-flatness and robustness constraints. Large-scale simulations of quantum error correction and logical entangling operations between neighboring surface-code patches predict more than an order-of-magnitude improvement in logical error rates compared with atom-shuttling architectures under realistic noise. The architecture achieves logical gate times of approximately 100 us and quantum-error-correction cycle times of about 1 ms for code distances d<12. These results establish static atomic buses as a practical alternative to atom shuttling for scalable fault-tolerant neutral-atom quantum computing.

quant-pharXiv:2607.02804•PRX Quantum•Jul 6, 2026•2 citations

Atomique: A Quantum Compiler for Reconfigurable Neutral Atom Arrays

Hanrui Wang, Pengyu Liu, Daniel Bochen Tan +6 more

The neutral atom array has gained prominence in quantum computing for its scalability and operation fidelity. Previous works focus on fixed atom arrays (FAAs) that require extensive SWAP operations for long-range interactions. This work explores a novel architecture reconfigurable atom arrays (RAAs), also known as field programmable qubit arrays (FPQAs), which allows for coherent atom movements during circuit execution under some constraints. Such atom movements, which are unique to this architecture, could reduce the cost of longrange interactions significantly if the atom movements could be scheduled strategically. In this work, we introduce Atomique, a compilation framework designed for qubit mapping, atom movement, and gate scheduling for RAA. Atomique contains a qubit-array mapper to decide the coarse-grained mapping of the qubits to arrays, leveraging MAX k-Cut on a constructed gate frequency graph to minimize SWAP overhead. Subsequently, a qubit-atom mapper determines the fine-grained mapping of qubits to specific atoms in the array and considers load balance to prevent hardware constraint violations. We further propose a router that identifies parallel gates, schedules them simultaneously, and reduces depth. We evaluate Atomique across 20+ diverse benchmarks, including generic circuits (arbitrary, QASMBench, SupermarQ), quantum simulation, and QAOA circuits. Atomique consistently outperforms IBM Superconducting, FAA with long-range gates, and FAA with rectangular and triangular topologies, achieving significant reductions in depth and the number of two-qubit gates.

arXiv:2311.15123•Proceedings - International Symposium on Computer Architecture/Proceedings•Jun 29, 2024•53 citations

Loss-correcting fault-tolerant quantum computing architecture for neutral atoms

Sanaa Sharma, Yutaka Hirano, Akihisa Goban +3 more

Neutral-atom arrays are a leading qubit technology for large-scale, fault-tolerant quantum computing (FTQC). A dominant error source on this platform is qubit loss, which accrues with every operation and movement. The presence of loss undermines the promises of existing architectural work. Standard error correction targets stochastic Pauli errors and cannot correct loss, so most FTQC performance analyses are not directly compatible with it. Moreover, compilation and routing decisions, which strongly affect overall loss, are typically optimized against Pauli-error cost models and often remain loss-agnostic, potentially increasing exposure to the loss channel. In this work, we comprehensively model the effect of qubit loss on neutral-atom FTQC and develop a loss-tolerant transversal-gate architecture. We treat loss not as a predetermined error parameter but as a dynamic budget spent across a whole program, allowing us to control it by co-designing layout, compilation, and decoding. We target a physical implementation with no separate storage and entangling zones, eliminating the repeated SLM-AOD handoffs and long-distance shuttling that dominate loss in other layouts. We develop compiler optimizations that maximize gate parallelism while respecting the RF tone budget and AOD bandwidth constraints. Our work couples these with a loss-aware, delayed-erasure decoder and an end-to-end loss-aware magic state cultivation protocol. Overall, we improve accumulated loss per syndrome-extraction round by up to 2.15X against a zoned baseline and reduce logical error rates by over two orders of magnitude versus current architectures. Our framework also informs concrete device targets such as continuous reloading rates, AOD counts, and shuttling trajectory choices. We expect these insights to matter for system architects as neutral-atom hardware scales.

quant-pharXiv:2609.10079•Sep 10, 2026•0 citations

A Neutral-Atom Quantum Compiler with Application-Specific Layout and Hub-Assisted Shuttling

Takahiko Satoh, Takaharu Yoshida

Compiling arbitrary-connectivity NISQ circuits onto monolithic single-zone neutral-atom devices is constrained by a finite interaction range and a minimum separation between simultaneously addressable sites. Under the minimum-separation constraint, the SWAP-only configuration of our pipeline does not return a schedule within a practical time budget on a range of circuits, including circuits as small as nine qubits. We address this with hub traps, a small number of dynamically placed empty traps that serve as transit waypoints, together with a per-gate rule that chooses between SWAP-based routing and hub-mediated shuttling. We evaluate the compiler on seventeen benchmarks using analytic estimates of execution time and a per-layer fidelity proxy, comparing against a placement-matched baseline and against ablations of our own pipeline. Hub traps make these otherwise-unsolved circuits compile in seconds to minutes and remove SWAP gates entirely on every completed circuit, so their role is to enable routing rather than only to optimize fidelity. The benefit is concentrated on routing-dominated circuits and is absent on routing-free ones, which we separate by the structure of the interaction graph. On the most routing-dominated circuit the fidelity proxy improves by up to three orders of magnitude over the placement-matched baseline. The gain comes primarily from eliminating SWAP overhead, as the absolute fidelities there remain low.

quant-pharXiv:2605.29964•May 29, 2026•0 citations

Optimal compilation strategies for QFT circuits in neutral-atom quantum computing

Dingchao Gao, Yongming Li, Shenggang Ying +1 more

Neutral-atom quantum computing (NAQC) offers distinct advantages such as dynamic qubit reconfigurability, long coherence times, and high gate fidelities, making it a promising platform for scalable quantum computing. Among existing implementations, the Dynamically Field-Programmable Qubit Array (DPQA) architecture has emerged as the most prominent NAQC platform, enabling large-scale, high-fidelity operations through dynamic atom rearrangement and global Rydberg excitation. Despite these strengths, efficiently implementing quantum circuits like the Quantum Fourier Transform (QFT) remains a significant challenge due to atom-movement overheads and connectivity constraints. This paper introduces optimal compilation strategies tailored to QFT circuits on the DPQA architecture, addressing these challenges for both linear and grid-like configurations. By minimizing atom movements, the proposed methods achieve theoretical lower bounds in movement counts while preserving high circuit fidelity. Comparative evaluations against state-of-the-art DPQA compilers demonstrate the superior performance of the proposed methods, which could serve as benchmarks for evaluating the performance of future DPQA compilers.

arXiv:2506.15116•Scientific Reports•Dec 25, 2025•2 citations

NAKO: A Benchmarking Framework for Evaluating and Diagnosing Neutral-Atom Quantum Compilers

Wenjie Sun, Zhigang Wang, Xiaoyu Li +4 more

Reconfigurable neutral-atom processors couple gate scheduling, atom placement, and parallel atom transport, so compiler decisions jointly determine physical execution costs. Evaluating these compilers requires attainable resource references and a way to trace excess costs to their causes. We present NAKO, a benchmarking framework that parameterizes circuits by qubit count, logical depth, and requested one- and two-qubit gate densities, and assigns attainable targets for Rydberg stages, routing intervals, and movement layers. Each benchmark is paired with an executable reference schedule; under the stated execution model, construction guarantees minimum Rydberg-stage and routing-interval counts, and minimum movement among schedules with the minimum Rydberg-stage count. Comparing compiler outputs with these references quantifies resource gaps, while reference mappings and intermediate physical states enable controlled interventions that trace excess costs to specific compiler decisions. In a 648-run evaluation of Enola and OLSQ-DPQA, NAKO identifies distinct bottlenecks. For Enola, placement scoring and cross-stage layout management contribute to excess movement; diagnosis-guided interventions reduce mean movement by 78.9% across five matched circuits. For OLSQ-DPQA, premature candidate selection and limited exploration of preparatory states produce avoidable entangling stages and routing intervals; four fixed-checkpoint continuations each eliminate one Rydberg stage and one routing interval without increasing movement. NAKO thus links resource targets backed by constructive optimality guarantees to controlled diagnosis and validation of compiler-specific resource savings.

quant-pharXiv:2610.39296•Oct 30, 2026•0 citations
Neutral atom quantum computing offers strong scalability and flexible qubit connectivity, but most existing compilation flows rely on reconfigurable atom arrays that physically shuttle qubit atoms during execution. Although this approach improves connectivity, it also introduces handoff errors, motional heating, and atom-loss risks that can degrade overall fidelity. We present BRIDGE, a Buffer-Relay Interconnect for Data-stable Gate Execution that co-designs a static, compiler-managed buffer-relay fabric with a lazy-move compiler that exploits it. BRIDGE targets an optimized, dual-species 2D interleaved atom array, using non-encoding ``buffer atoms'' to mediate long-range interactions in the fixed baseline and introducing limited data motion only for selected hotspots. By using calibrated heteronuclear and homonuclear Rydberg channels, BRIDGE realizes a static routing backbone in which data-buffer and buffer-buffer interactions are enabled while residual data-data crosstalk is suppressed. Across a 22-circuit matched benchmark suite re-estimated under a single shared error model, BRIDGE attains a geometric-mean ∼\sim∼10×\times× higher total fidelity than ZAP and ∼\sim∼16×\times× than Enola, together with ∼\sim∼540×\times× and ∼\sim∼1000×\times× lower circuit execution time, respectively, while reducing data-atom movement from thousands of transport events to zero.
Efficient quantum error correction and fault-tolerant quantum computing require scalable, high-fidelity long-range connectivity. In neutral-atom quantum computers, this is commonly achieved through atom transport, but shuttling introduces latency and motional heating that worsen with system size. Here, we introduce a neutral-atom architecture based on static atomic buses, in which auxiliary mediator atoms enable long-range entangling operations without qubit transport. The architecture naturally supports long-range stabilizer measurements in high-rate LDPC codes and transversal logical gates between neighboring surface-code patches, enabling a modular framework for efficient logical memories, Clifford computation, and magic-state distillation. To realize these capabilities, we co-design optimal-control protocols for bus-mediated controlled-Z gates that incorporate both microscopic neutral-atom dynamics and architectural constraints. We obtain smooth bus-mediated gates with fidelities approaching 99.9% and durations of a few hundred nanoseconds by combining time-optimal control with interaction-flatness and robustness constraints. Large-scale simulations of quantum error correction and logical entangling operations between neighboring surface-code patches predict more than an order-of-magnitude improvement in logical error rates compared with atom-shuttling architectures under realistic noise. The architecture achieves logical gate times of approximately 100 us and quantum-error-correction cycle times of about 1 ms for code distances d<12. These results establish static atomic buses as a practical alternative to atom shuttling for scalable fault-tolerant neutral-atom quantum computing.
The neutral atom array has gained prominence in quantum computing for its scalability and operation fidelity. Previous works focus on fixed atom arrays (FAAs) that require extensive SWAP operations for long-range interactions. This work explores a novel architecture reconfigurable atom arrays (RAAs), also known as field programmable qubit arrays (FPQAs), which allows for coherent atom movements during circuit execution under some constraints. Such atom movements, which are unique to this architecture, could reduce the cost of longrange interactions significantly if the atom movements could be scheduled strategically. In this work, we introduce Atomique, a compilation framework designed for qubit mapping, atom movement, and gate scheduling for RAA. Atomique contains a qubit-array mapper to decide the coarse-grained mapping of the qubits to arrays, leveraging MAX k-Cut on a constructed gate frequency graph to minimize SWAP overhead. Subsequently, a qubit-atom mapper determines the fine-grained mapping of qubits to specific atoms in the array and considers load balance to prevent hardware constraint violations. We further propose a router that identifies parallel gates, schedules them simultaneously, and reduces depth. We evaluate Atomique across 20+ diverse benchmarks, including generic circuits (arbitrary, QASMBench, SupermarQ), quantum simulation, and QAOA circuits. Atomique consistently outperforms IBM Superconducting, FAA with long-range gates, and FAA with rectangular and triangular topologies, achieving significant reductions in depth and the number of two-qubit gates.
Neutral-atom arrays are a leading qubit technology for large-scale, fault-tolerant quantum computing (FTQC). A dominant error source on this platform is qubit loss, which accrues with every operation and movement. The presence of loss undermines the promises of existing architectural work. Standard error correction targets stochastic Pauli errors and cannot correct loss, so most FTQC performance analyses are not directly compatible with it. Moreover, compilation and routing decisions, which strongly affect overall loss, are typically optimized against Pauli-error cost models and often remain loss-agnostic, potentially increasing exposure to the loss channel. In this work, we comprehensively model the effect of qubit loss on neutral-atom FTQC and develop a loss-tolerant transversal-gate architecture. We treat loss not as a predetermined error parameter but as a dynamic budget spent across a whole program, allowing us to control it by co-designing layout, compilation, and decoding. We target a physical implementation with no separate storage and entangling zones, eliminating the repeated SLM-AOD handoffs and long-distance shuttling that dominate loss in other layouts. We develop compiler optimizations that maximize gate parallelism while respecting the RF tone budget and AOD bandwidth constraints. Our work couples these with a loss-aware, delayed-erasure decoder and an end-to-end loss-aware magic state cultivation protocol. Overall, we improve accumulated loss per syndrome-extraction round by up to 2.15X against a zoned baseline and reduce logical error rates by over two orders of magnitude versus current architectures. Our framework also informs concrete device targets such as continuous reloading rates, AOD counts, and shuttling trajectory choices. We expect these insights to matter for system architects as neutral-atom hardware scales.
Compiling arbitrary-connectivity NISQ circuits onto monolithic single-zone neutral-atom devices is constrained by a finite interaction range and a minimum separation between simultaneously addressable sites. Under the minimum-separation constraint, the SWAP-only configuration of our pipeline does not return a schedule within a practical time budget on a range of circuits, including circuits as small as nine qubits. We address this with hub traps, a small number of dynamically placed empty traps that serve as transit waypoints, together with a per-gate rule that chooses between SWAP-based routing and hub-mediated shuttling. We evaluate the compiler on seventeen benchmarks using analytic estimates of execution time and a per-layer fidelity proxy, comparing against a placement-matched baseline and against ablations of our own pipeline. Hub traps make these otherwise-unsolved circuits compile in seconds to minutes and remove SWAP gates entirely on every completed circuit, so their role is to enable routing rather than only to optimize fidelity. The benefit is concentrated on routing-dominated circuits and is absent on routing-free ones, which we separate by the structure of the interaction graph. On the most routing-dominated circuit the fidelity proxy improves by up to three orders of magnitude over the placement-matched baseline. The gain comes primarily from eliminating SWAP overhead, as the absolute fidelities there remain low.
Neutral-atom quantum computing (NAQC) offers distinct advantages such as dynamic qubit reconfigurability, long coherence times, and high gate fidelities, making it a promising platform for scalable quantum computing. Among existing implementations, the Dynamically Field-Programmable Qubit Array (DPQA) architecture has emerged as the most prominent NAQC platform, enabling large-scale, high-fidelity operations through dynamic atom rearrangement and global Rydberg excitation. Despite these strengths, efficiently implementing quantum circuits like the Quantum Fourier Transform (QFT) remains a significant challenge due to atom-movement overheads and connectivity constraints. This paper introduces optimal compilation strategies tailored to QFT circuits on the DPQA architecture, addressing these challenges for both linear and grid-like configurations. By minimizing atom movements, the proposed methods achieve theoretical lower bounds in movement counts while preserving high circuit fidelity. Comparative evaluations against state-of-the-art DPQA compilers demonstrate the superior performance of the proposed methods, which could serve as benchmarks for evaluating the performance of future DPQA compilers.
Reconfigurable neutral-atom processors couple gate scheduling, atom placement, and parallel atom transport, so compiler decisions jointly determine physical execution costs. Evaluating these compilers requires attainable resource references and a way to trace excess costs to their causes. We present NAKO, a benchmarking framework that parameterizes circuits by qubit count, logical depth, and requested one- and two-qubit gate densities, and assigns attainable targets for Rydberg stages, routing intervals, and movement layers. Each benchmark is paired with an executable reference schedule; under the stated execution model, construction guarantees minimum Rydberg-stage and routing-interval counts, and minimum movement among schedules with the minimum Rydberg-stage count. Comparing compiler outputs with these references quantifies resource gaps, while reference mappings and intermediate physical states enable controlled interventions that trace excess costs to specific compiler decisions. In a 648-run evaluation of Enola and OLSQ-DPQA, NAKO identifies distinct bottlenecks. For Enola, placement scoring and cross-stage layout management contribute to excess movement; diagnosis-guided interventions reduce mean movement by 78.9% across five matched circuits. For OLSQ-DPQA, premature candidate selection and limited exploration of preparatory states produce avoidable entangling stages and routing intervals; four fixed-checkpoint continuations each eliminate one Rydberg stage and one routing interval without increasing movement. NAKO thus links resource targets backed by constructive optimality guarantees to controlled diagnosis and validation of compiler-specific resource savings.