Conveyor-belt magneto-optical traps (CB-MOTs) use blue-detuned polarization-gradient forces to provide simultaneous cooling, confinement, and loading on type-II molecular transitions. Recent experiments with \baf{138} showed that this mechanism can directly load a slowed molecular beam with an efficiency exceeding that of a conventional red-detuned MOT. Here we use established optical-Bloch-equation force calculations and classical trajectory propagation to ask whether this direct-loading strategy should extend beyond the specific molecule used in the first demonstration. For \baf{138}, the calculation reproduces the experimentally observed trend that the CB-MOT capture velocity increases with laser intensity. We then apply the same framework to two closely related but experimentally distinct cases: \baf{137}, whose dense hyperfine structure complicates a conventional dual-frequency MOT, and \bah{138}, whose narrower linewidth and longer wavelength reduce the available radiative force. In both cases, the CB-MOT retains a broad region of nonzero capture velocity. These results identify the molecular conditions under which direct CB-MOT loading should remain effective and show that the dipole-force-dominated conveyor-belt mechanism provides a practical loading route for heavy laser-coolable molecules whose MOT performance is otherwise limited by photon recoil, scattering rate, or hyperfine complexity.
Conveyor-belt magneto-optical traps (CB-MOTs) use blue-detuned polarization-gradient forces to provide simultaneous cooling, confinement, and loading on type-II molecular transitions. Recent experiments with \baf{138} showed that this mechanism can directly load a slowed molecular beam with an efficiency exceeding that of a conventional red-detuned MOT. Here we use established optical-Bloch-equation force calculations and classical trajectory propagation to ask whether this direct-loading strategy should extend beyond the specific molecule used in the first demonstration. For \baf{138}, the calculation reproduces the experimentally observed trend that the CB-MOT capture velocity increases with laser intensity. We then apply the same framework to two closely related but experimentally distinct cases: \baf{137}, whose dense hyperfine structure complicates a conventional dual-frequency MOT, and \bah{138}, whose narrower linewidth and longer wavelength reduce the available radiative force. In both cases, the CB-MOT retains a broad region of nonzero capture velocity. These results identify the molecular conditions under which direct CB-MOT loading should remain effective and show that the dipole-force-dominated conveyor-belt mechanism provides a practical loading route for heavy laser-coolable molecules whose MOT performance is otherwise limited by photon recoil, scattering rate, or hyperfine complexity.
We report the realization of a blue-detuned magneto-optical trap (BDM) of BaF molecules. The (1+1) type BDM and (1+2) type conveyor-belt MOT (CB-MOT) are explored. While the (1+1) BDM provides only a weak trapping force, the CB-MOT significantly compresses the molecular cloud, achieving a Gaussian rms width of 316 μm, a temperature of 240 μK, and a peak number density of 2.4×10^{7} cm^{-3}. This performance marks two orders of magnitude improvement over red-detuned MOTs. More importantly, we demonstrate the efficient direct loading of the CB-MOT from a slowed molecular beam, surpassing the loading efficiency of the standard dual-frequency MOT. This surprising result is attributed to the dipole-force-dominated trapping mechanism, wherein the capture velocity increases continuously with laser power, unimpeded by the saturation limit of photon scattering. This method is particularly advantageous for laser cooling and trapping challenging molecular species with large mass, small photon recoil, and narrow linewidths.
Abstract Laser cooling is used to produce ultracold atoms and molecules for quantum science and precision measurement applications. Molecules are more challenging to cool than atoms due to their vibrational and rotational internal degrees of freedom. Molecular rotations lead to the use of type-II transitions ( F ⩾ F ′ ) for magneto-optical trapping (MOT). When typical red detuned light frequencies are applied to these transitions, sub-Doppler heating is induced, resulting in higher temperatures and larger molecular cloud sizes than realized with the type-I MOTs most often used with atoms. To improve type-II MOTs, Jarvis et al (2018 Phys. Rev. Lett. 120 083201) proposed a blue-detuned MOT to be applied after initial cooling and capture with a red-detuned MOT. This was successfully implemented (Burau et al 2023 Phys. Rev. Lett. 130 193401; Jorapur et al 2024 Phys. Rev. Lett. 132 163403; Li et al 2024 Phys. Rev. Lett. 132 233402), realizing colder and denser molecular samples. Very recently, Hallas et al (2024 arXiv:2404.03636) demonstrated a blue-detuned MOT with a ‘1+2’ configuration that resulted in even stronger compression of the molecular cloud. Here, we describe and characterize theoretically the conveyor-belt mechanism that underlies this observed enhanced compression. We perform numerical simulations of the conveyor-belt mechanism using both stochastic Schrödinger equation and optical Bloch equation approaches. We investigate the conveyor-belt MOT characteristics in relation to laser parameters, g-factors and the structure of the molecule, and find that conveyor-belt trapping should be applicable to a wide range of laser-coolable molecules.
We report the realization of a blue-detuned magneto-optical trap (BDM) of BaF molecules. The (1 + 1) type BDM and (1 + 2) type conveyor-belt MOT are explored. While the (1+1) BDM provides only weak trapping force, the conveyor-belt MOT significantly compresses the molecular cloud, achieving a radius of 320(20) μm, a temperature of 240(60) μK, and a peak density of 1.3{\times}10^7 cm^{-3}, representing a significant improvement over the red MOT. Interestingly, the conveyor-belt MOT of BaF exhibits a large capture velocity, and the loading efficiency from red MOT reaches near unity even without gray molasses. We confirm this by directly loading slowed molecules into the conveyor-belt MOT.
Achieving high-density samples of laser-cooled molecules is a critical step toward advancing applications in precision measurements, ultracold chemistry and quantum science. We report the experimental realization of a high-density conveyor-belt magneto-optical trap for calcium monofluoride (CaF) molecules. The obtained highly-compressed cloud has a mean radius of 64(5) μm and a peak number density of 3.6(5) × 1010 cm−3, a 600-fold increase over the conventional red-detuned MOTs of CaF, and the densest molecular MOT observed to date. Subsequent loading of these molecules into an optical dipole trap yields up to 2.6 × 104 trapped molecules at a temperature of 14(2) μK with a peak phase-space density of ~ 2.4 × 10−6. This opens new possibilities for a range of applications utilizing high-density, optically trapped ultracold molecules. Magneto-optical traps (MOTs) are a workhorse for laser cooling of atoms and were recently extended to molecules. Yet, new mechanisms for molecular trapping and cooling are still an open area of exploration. Here, the authors show a blue-detuned MOT based on a conveyor-belt effect for CaF molecules, yielding higher number densities, comparable with some atomic MOTs.
In red-detuned magneto-optical traps (MOTs) of molecules, sub-Doppler heating competes with Doppler cooling, resulting in high temperature and low density. A solution is offered by the blue-detuned MOT where sub- Doppler cooling dominates and the cloud is compressed. Several blue-detuned molecular MOTs have been implemented. A recent implementation relies on a pair of orthogonally polarized components whose frequency separation is smaller than the transition linewidth. We identify the trapping force in these MOTs. At a certain magnetic field, there is a state that is dark to the laser propagating in one direction, but not to the counterpropagating one. This Zeeman-induced dark state (ZIDS) sets up an imbalance in the photon scattering rate, leading to a restoring force. We also study the role of the moving lattices generated by the closely spaced frequency components of the light. We show that there is a velocity-dependent force that drives the molecules toward the speeds of these moving lattices, and that over a relevant range of magnetic fields this combines with the ZIDS force to transport molecules toward the center of the MOT. Here, gray molasses cooling, assisted by nonadiabatic transitions driven by the time-varying polarization of the light field, cools the molecules toward zero velocity. We study these mechanisms for model systems with simple level structures and then extend them to molecules with ground-state hyperfine structure.
We present the properties of a magneto-optical trap (MOT) of CaF molecules. We study the process of loading the MOT from a decelerated buffer-gas-cooled beam, and how best to slow this molecular beam in order to capture the most molecules. We determine how the number of molecules, the photon scattering rate, the oscillation frequency, damping constant, temperature, cloud size and lifetime depend on the key parameters of the MOT, especially the intensity and detuning of the main cooling laser. We compare our results to analytical and numerical models, to the properties of standard atomic MOTs, and to MOTs of SrF molecules. We load up to molecules, and measure a maximum scattering rate of s −1 per molecule, a maximum oscillation frequency of 100 Hz, a maximum damping constant of 500 s −1 , and a minimum MOT rms radius of 1.5 mm. A minimum temperature of 730 μ K is obtained by ramping down the laser intensity to low values. The lifetime, typically about 100 ms, is consistent with a leak out of the cooling cycle with a branching ratio of about . The MOT has a capture velocity of about 11 m s −1 .