Quantum impurity models, which describe the coupling between interacting orbitals and a non-interacting bath, play a central role in the physics of strongly correlated electron systems. Solving a quantum impurity model in general requires the use of non-perturbative numerical methods. Hamiltonian-based approaches, which rely on an explicit bath discretization, are typically limited to a small number of bath sites or small entanglement, and diagrammatic methods suffer from sign problems, slow convergence, or diagram truncation approximations. Here we show that these two classes of methods can be combined: augmenting diagrammatic methods with a small auxiliary bath can reduce the residual problem to a regime where low-order perturbation theory is highly accurate and rapidly converging. In a simple benchmark, the precision of the hybrid approach surpasses bold-line calculations by several orders of magnitude; for a strongly interacting two-orbital model with a severe sign problem, convergence is achieved at three orders of magnitude lower computational cost than competing methods; and convergence to the unknown exact result is rapidly accelerated in a difficult realistic problem. Our results establish a practical route to high-precision quantum impurity solutions in correlated quantum systems.
Quantum impurity models, which describe the coupling between interacting orbitals and a non-interacting bath, play a central role in the physics of strongly correlated electron systems. Solving a quantum impurity model in general requires the use of non-perturbative numerical methods. Hamiltonian-based approaches, which rely on an explicit bath discretization, are typically limited to a small number of bath sites or small entanglement, and diagrammatic methods suffer from sign problems, slow convergence, or diagram truncation approximations. Here we show that these two classes of methods can be combined: augmenting diagrammatic methods with a small auxiliary bath can reduce the residual problem to a regime where low-order perturbation theory is highly accurate and rapidly converging. In a simple benchmark, the precision of the hybrid approach surpasses bold-line calculations by several orders of magnitude; for a strongly interacting two-orbital model with a severe sign problem, convergence is achieved at three orders of magnitude lower computational cost than competing methods; and convergence to the unknown exact result is rapidly accelerated in a difficult realistic problem. Our results establish a practical route to high-precision quantum impurity solutions in correlated quantum systems.
An impurity model describes an atom or molecule embedded in some host or bath, with which it can exchange electrons. This exchange of electrons allows the impurity to make transitions between different quantum states, and leads to a non-trivial dynamics. Therefore, despite the zero dimensional nature (which makes impurity problems computationally much more tractable than fermionic lattice models), their numerical simulation remains a challenging task. Methods such as exact diagonalization or numerical RG, which explicitly treat a finite number of bath states, work well for single orbital models. However, because the number of bath states must be increased proportional to the number of orbitals, the computational effort grows exponentially with system size, and requires severe truncations of the bath already for two orbitals. Monte Carlo methods have the advantage that the bath is integrated out and thus the (infinite) size of the bath Hilbert space does not affect the simulation. While restricted to finite temperature, Monte Carlo methods are thus the method of choice for the solution of large multi-orbital or cluster impurity problems. Over the last few years, significant progress has been made (both in terms of efficiency and flexibility) with the development of diagrammatic Monte Carlo techniques. These notes provide an overview over two recently developed, complementary methods: (i) the weakcoupling approach, which scales favorably with system size and allows the efficient simulation of large impurity clusters, and (ii) the strong-coupling approach, which can handle impurity
Theoretical studies of electron and energy transport in nanostructures usually involve nonequilibrium quantum impurity models, which feature a locally interacting quantum system (impurity) coupled to noninteracting bosonic and/or electronic baths each at its own equilibrium. In these models, the interplay of strong correlation, nonequilibrium effects and dissipation leads to rich and complex phenomena. As a nonequilibrium strongly correlated many-body problem, these models, except at some rare cases, have no exact analytical solution, and hence their treatment heavily relies upon numerical techniques. The goal of this thesis is to develop numerically accurate and relatively low-cost techniques for treatment of strongly correlated open nonequilibirum quantum systems. Such impurity solvers are in high demand both as standalone methods for simulation of response in nanoscale junctions and as part of divide-and-conquer schemes such as dynamical mean field theory (DMFT).For nonequilibirum open quantum systems, two characteristic energy scales governing the physics are intra-system interactions and strength of the system-baths couplings. Thus, systems strongly coupled to their baths with weak intra-system interactions or weakly coupled systems with strong local interactions can be treated within developed perturbation theory approaches. My research focuses on development of nonequilibirum dual techniques, which are capable to accurately treat situations where perturbative techniques are inapplicable due to absence of a small parameter in the system and which reduce to standard perturbative expansions in the limits of weak coupling or weak intra-system interaction. \tDual techniques rely on ability to solve exactly a simplified reference system. The latter includes exactly all intra-system interactions and accounts approximately for system-bath couplings. Dual techniques (described below) allow to account for deviation from the correct hybridization function in a organized and controlled manner of superperturbative expansion. Here, I use Markovian Lindbald quantum master equation (QME) as a solver for the reference system. In the thesis I discuss possibility of mapping between true non-Markov dynamics and simpler Markov Lindblad QME (mapping between physical and reference systems), numerical methods for the mapping and for solution of the resulting Lindblad QME, and application of the mapping in novel dual formulations: auxiliary-QME dual fermion and dual boson approaches. \tFirst I analytically prove that the continuous fermionic baths that the impurity is coupled to can be mapped onto a set of dissipative auxiliary modes under Lindblad QME. Based on this mapping, complicated non-Markovian dynamics of the open fermionic system can be treated by a much simpler Markovian Lindblad QME. However, nice mapping generally requires many auxiliary modes, and numerically only a small number of modes can be exactly diagonalized due to exponential increase of the Hilbert space. To perturbatively treat the difference between the true bath and the small-size auxiliary one, we introduce dual-fermion method. It can directly target the steady state and avoid long-time propagation. Besides current-voltage relation, it can also provide spectral functions, indicating itself as a potential impurity solver for DMFT. Furthermore, we generalize dual-fermion method to consider additionally the effects of bosonic environment; hence it is called dual-boson method. It can be used for studying electron-phonon interaction and light-matter interaction in nanojunctions. By comparing with numerically exact results we argue that both methods are very accurate and relatively cheap. \tFinally, matrix product state representation of the Lindblad QME enables us to treat a large number of auxiliary modes, which provide an exponentially improved mapping. Adding counting field to the auxiliary QME, we can compute the generating function of time-dependent full-counting statistics of electron transport, which yields not only electronic current but also higher-order cumulants (e.g., zero-frequency noise).
Impurity solvers play an essential role in the numerical investigation of strongly correlated electrons systems within the ``dynamical mean field'' approximation. Recently, a new class of continuous-time solvers has been developed based on a diagrammatic expansion of the partition function in either the interactions or the impurity-bath hybridization. We investigate the performance of these two complementary approaches and compare them to the well-established Hirsch-Fye method. The results show that the continuous-time methods, and, in particular, the version which expands in the hybridization, provide substantial gains in computational efficiency.
This thesis is devoted to the development of numerical methods for correlated electrons in realistic systems based on perturbation theories using Feynman diagrams. Electron correlations in realistic systems give rise to a wide range of interesting physical properties. Diagrammatic expansions and its low-order approximations are key building blocks of theoretical and numerical methods for studying correlated electrons. Recent developments of the diagrammatic quantum Monte Carlo (DiagMC) methods enable efficient stochastic evaluations of diagrams and does not suffer from numerical sign problem which worsens with increasing system size. It is therefore a promising direction to apply DiagMC techniques to realistic electron systems in the pursuit of ab initio calculations of correlated materials. This thesis starts by reviewing basic concepts and definitions of realistic electron systems, the perturbation theory based on Feynman diagrams, Monte Carlo evaluations of the series, as well as self-consistent diagrammatic methods. Low-order diagrammatic methods are applied to realistic calculations and benchmarked against large collections of state-of-the-art many-body methods. The thesis then proposes a diagrammatic Monte Carlo solver for realistic molecules and impurities based on a recursive evaluation of diagrams, which is tested on realistic molecules and impurities with varying temperature, system size, and interaction strength. We observe that this method is ideal for problems with many orbitals with moderate correlations, but may suffer from series divergence at strong correlations. Next, we propose the inchworm Monte Carlo algorithm for interaction expansion, which overcomes limitations of divergent diagrammatic series by replacing the standard perturbation series with a sequence of incremental series expansions. A prototype implementation is presented for system with on-site Hubbard interactions. Finally, we discuss technical aspects of numerical representations of the Green's function, which has significant impact on the efficiency of diagrammatic methods. We review several common numerical representations, and introduce our development of the sparse sampling method, which provides compact representations of the Green's function in both imaginary time and frequency as well as fast transformation formula between the two.
We present a very efficient solver for the general Anderson impurity problem. It is based on the perturbation around a solution obtained from exact diagonalization, using a small number of bath sites. We formulate a perturbation theory which is valid for both weak and strong coupling and interpolates between these limits. Good agreement with numerically exact quantum Monte Carlo results is found for a single bath site over a wide range of parameters. In particular, the Kondo resonance in the intermediate-coupling regime is well reproduced for a single bath site and the lowest-order correction. The method is particularly suited for low temperatures, alleviates analytical continuation of imaginary time data due to the absence of statistical noise and can be generalized to obtain dynamical quantities directly on the real axis.
We present a quantum impurity solver based on a pseudoparticle framework, which combines diagrammatic resummations for a three-point vertex with diagrammatic Monte Carlo sampling of a four-point vertex. This recently proposed approach (A. J. Kim et al., arXiv:2112.15549) is generalized here to fermionic impurity problems and we discuss the technical details of the implementation, including the time-stepping approach, the Monte Carlo updates, and the routines for checking the two-particle irreducibility of the four-point vertex. We also explain how the vertex information can be efficiently stored using a Dubiner basis representation. The convergence properties of the algorithm are demonstrated with applications to exactly solvable impurity models and dynamical mean field theory simulations of the single-orbital Hubbard model. It is furthermore shown that the algorithm can handle a two-orbital problem with off-diagonal hybridizations, which would cause a severe sign problem in standard hybridization-expansion Monte Carlo simulations. Since the vertex-based algorithm successfully handles sign-oscillating integrals in equilibrium and samples only connected diagrams, it may be a promising approach for real-time simulations.