Reliable large-scale quantum computation relies on fault-tolerant architectures, where quantum error correction (QEC) continuously extracts and decodes error syndromes in real time. A critical component in QEC is the decoder, a classical subsystem that must simultaneously deliver high logical accuracy and ultra-low latency. This paper presents a novel algorithm-hardware co-design that improves the accuracy-latency trade-off over existing approaches such as vanilla Minimum-Weight Perfect Matching (MWPM) and Union-Find (UF) decoders. At the algorithmic level, we introduce coset ensemble decoding, which improves UF decoding by explicitly exploiting logically equivalent cosets. Our method performs ensemble forest exploration to generate multiple coset-consistent candidates and aggregates them to approximate coset-level maximum-likelihood decoding. We further reduce computational and memory complexity via reverse-order elimination and lossless graph compression, without sacrificing accuracy. At the hardware level, we design a domain-specific architecture that temporally reuses resources, avoiding the code-distance-proportional resource growth in prior spatial architectures. Several optimizations, such as multi-bank memory hashing and hierarchical ID mapping, are proposed to mitigate pipeline stalls and memory conflicts under highly concurrent access patterns. Under a circuit-level depolarizing noise model, our co-design approach achieves a better accuracy-latency trade-off than prior MWPM- and UF-based decoders, while reducing FPGA LUT consumption by up to 8.2 times compared with reported UF-based decoder resources. The tunable candidate number further exposes a flexible design knob, enabling users to tailor decoding performance to the requirements of different fault-tolerant workloads. Our implementation is publicly available at https://github.com/IMSeonL/coset-ensemble-decoder.
Comments
15 pages, 19 figures, 1 table. Accepted to appear in the 53rd Annual International Symposium on Computer Architecture (ISCA 2026)
Reliable large-scale quantum computation relies on fault-tolerant architectures, where quantum error correction (QEC) continuously extracts and decodes error syndromes in real time. A critical component in QEC is the decoder, a classical subsystem that must simultaneously deliver high logical accuracy and ultra-low latency. This paper presents a novel algorithm-hardware co-design that improves the accuracy-latency trade-off over existing approaches such as vanilla Minimum-Weight Perfect Matching (MWPM) and Union-Find (UF) decoders. At the algorithmic level, we introduce coset ensemble decoding, which improves UF decoding by explicitly exploiting logically equivalent cosets. Our method performs ensemble forest exploration to generate multiple coset-consistent candidates and aggregates them to approximate coset-level maximum-likelihood decoding. We further reduce computational and memory complexity via reverse-order elimination and lossless graph compression, without sacrificing accuracy. At the hardware level, we design a domain-specific architecture that temporally reuses resources, avoiding the code-distance-proportional resource growth in prior spatial architectures. Several optimizations, such as multi-bank memory hashing and hierarchical ID mapping, are proposed to mitigate pipeline stalls and memory conflicts under highly concurrent access patterns. Under a circuit-level depolarizing noise model, our co-design approach achieves a better accuracy-latency trade-off than prior MWPM- and UF-based decoders, while reducing FPGA LUT consumption by up to 8.2 times compared with reported UF-based decoder resources. The tunable candidate number further exposes a flexible design knob, enabling users to tailor decoding performance to the requirements of different fault-tolerant workloads. Our implementation is publicly available at https://github.com/IMSeonL/coset-ensemble-decoder.
Quantum computers can solve selected problems more efficiently than classical computers, but current devices are limited by high physical error rates. Quantum Error Correction (QEC) mitigates this by encoding many physical qubits into a logical qubit, with the surface code among the most widely studied approaches. Since syndrome measurements are produced continuously, the decoder must process them fast enough to avoid becoming a system bottleneck, making real-time decoding essential for fault-tolerant quantum computing. While most state-of-the-art real-time decoders rely on Minimum-Weight Perfect Matching (MWPM), we instead use a high-accuracy Graph Neural Network (GNN) that trades higher computational cost for lower logical error rates. To make this GNN practical for real-time decoding, we apply algorithm-hardware co-design. We reduce complexity through hardware-guided pruning and retraining, producing two hardware-friendly models that reduce parameter count by 3.1× and 6.5×. These target, respectively, an average decoding latency of one syndrome cycle and a worst-case latency within one syndrome cycle. We further reduce hardware cost using input-graph filtering and post-training quantization. Based on these optimized models, we propose an FPGA-based architecture for low-latency inference and real-time decoding. Evaluated on surface codes up to distance 7 under circuit-level noise at physical error rate p=10−3, our decoder outperforms MWPM in decoding accuracy for both average-latency and max-latency settings. It reduces logical error rate by 40% at 1μs average latency, and by 13% under a strict 1μs deadline.
Quantum computers promise computational advantages for many important problems across various application domains. Unfortunately, physical quantum devices are highly susceptible to errors that limit us from running most of these quantum applications. Quantum Error Correction (QEC) codes are required to implement Fault-Tolerant Quantum Computers (FTQC) on which computations can be performed without encountering errors. Error decoding is a critical component of quantum error correction and is responsible for transforming a set of qubit measurements generated by the QEC code, called the syndrome, into error locations and error types. For the feasibility of implementation, error decoders must not only identify errors with high accuracy, but also be fast and scalable to a large number of qubits. Unfortunately, most of the prior works on error decoding have focused primarily only on the accuracy and have relied on software implementations that are too slow to be of practical use. Furthermore, these studies only look at designing a single decoder and do not analyze the challenges involved in scaling the storage and bandwidth requirements when performing error correction in large systems with thousands of qubits.In this paper, we present AFS, an accurate, fast, and scalable decoder architecture that is designed to operate in the context of systems with hundreds of logical qubits. We present the hardware implementation of AFS, which is based on the Union Find decoding algorithm and employs a three-stage pipelined design. AFS provides orders of magnitude higher accuracy compared to recent SFQ-based hardware decoders (logical error rate of 6×10−10for physical error rate of 10−3) and low decoding latency (42ns on average), while being robust to measurement errors introduced while extracting syndromes during the QEC cycles. We also reduce the amount of decoding hardware required to perform QEC simultaneously on all the logical qubits by co-designing the micro-architecture across multiple decoding units. Our proposed Conjoined-Decoder Architecture (CDA) reduces the storage overhead by 70% (10MB to 2.8MB). Finally, we reduce the bandwidth overheads required to transmit syndromes from the qubits to the decoders by exploiting the sparsity in the syndromes and compressing the data. Our proposed Syndrome Compression reduces the bandwidth requirement by 30x, on an average.
In the pursuit of fault-tolerant quantum computing, low-latency quantum error correction (QEC) is essential to prevent rapid error accumulation within the syndrome measurement cycle. In this work, we propose a microarchitecture that implements the sandwich decoding method using the Union-Find algorithm by exploiting temporal parallelism, and we present an ASIC implementation. Through logic synthesis and simulation, we show that the proposed decoder achieves an average latency reduction of 35% at code distance d = 21 compared with a conventional batch Union-Find decoder, while maintaining a comparable logical error threshold of approximately 1.5% under phenomenological noise.
Real-time Quantum Error Correction (QEC) imposes strict timing constraints that challenge the integration of classical decoding algorithms into scalable control electronics. While approaches such as Minimum Weight Perfect Matching (MWPM) achieve high accuracy, their hardware realization often entails non-deterministic latency and significant resource consumption.This paper proposes a hardware-software co-design of a neuromorphic processing kernel based on Spiking Convolutional Neural Networks (ConvSNNs) for real-time QEC. By leveraging a "temporal folding" architecture, the spatiotemporal syndrome volume is compressed into a 2.5D feature map, bypassing the memory overhead of standard 3D convolutions. We introduce an optimized hardware implementation of Leaky Integrate-and-Fire (LIF) neurons utilizing a subtractive reset mechanism and static pre-activation batch normalization, achieving zero-cost stabilization in hardware.Furthermore, a hardware-aware calibration strategy is implemented to adapt neuronal firing thresholds to the code distance. This calibration optimizes the trade-off between noise suppression and signal sensitivity, reducing network switching activity to approximately 18% for enhanced energy efficiency. For a code distance of d = 3, the synthesized kernel utilizes 181 LUTs (< 2% of the device) [3], offering a deterministic and compact solution suitable for first-line decoding in cryogenic quantum control systems.
Especially in noisy intermediate-scale quantum (NISQ) devices, fault-tolerant quantum computing cannot be realized without quantum error correction. High error rates in quantum systems stemming from decoherence and gate defects call for effective and flexible QEC systems. This paper presents a novel FPGA-based architecture using dynamic reconfiguration to maximize hardware resources in response to real-time error patterns. Supporting bit-flip, phase-flip, and depolarizing faults among several error correction techniques guarantees high accuracy and little hardware overhead. Scaled for surface code distances up to and beyond, the design combines modular pipelines, adaptive hardware allocation, and error pattern detection. Designed on a Xilinx XC7A50T-CPG236 FPGA, the system showed notable gains over static architecture, averaging 30% lower latency and 20% less resource use overall. Low latency and high throughput are maintained while this dynamic technique enables flexible adaptability to several quantum error models. The outcomes show how well this structure may improve quantum error-correcting systems and enable the incorporation of QEC into useful quantum computer configurations.
Fault-tolerant quantum computing requires classical decoders that keep pace with the underlying hardware, translating syndrome measurements into corrections fast enough to avoid an exponential backlog. To meet this real-time constraint, pre-decoders have emerged as part of a hierarchical decoding approach to resolve simple, local errors before passing a sparser residual syndrome to a strong decoder. While pre-decoding should, in theory, speed up the strong decoder, in practice, the speedup is only marginal, since existing strong decoders are designed to decode dense syndromes and cannot exploit the sparsity provided by pre-decoders. To address this, we present Zero-G, a strong decoder designed for use alongside pre-decoders. As a stochastic approximate minimum-weight perfect matching (MWPM) decoder, Zero-G exploits sparse residual syndromes, dynamically trading latency for accuracy rather than relying on an all-or-nothing runtime-accuracy trade-off. By decoupling hardware control from the decoding core itself, we enable heterogeneous deployment across both FPGAs and CPUs without maintaining separate implementations. Zero-G achieves a 10× latency improvement over existing strong decoders at matching accuracy, with worst-case sub-350ns decoding at code distances up to d=15, while scaling to 640 logical qubits on a single 128-core CPU and 32 logical qubits on a single AMD Versal V80 FPGA.