The scalability of physical qubit numbers is a central challenge toward a universal fault-tolerant quantum computer. The inherent scalability of atom array quantum computers stems from the identical nature of atomic qubits, so the available qubit resource is primarily limited by the number of atoms that can be trapped and controlled. Here, we robustly trap 11,000 individual atoms in a tweezer array, thereby enabling the available qubit resource to reach the tens-of-thousands scale for the first time among all quantum computation platforms. This advance is enabled by a single metasurface, approximately 2 cm in diameter, that generates the entire tweezer array without the need for microscope objectives, thereby maximizing laser-power efficiency. The large aperture ensures a working distance of about 1.5 cm, allowing the metasurface to be placed outside the vacuum cell and avoiding the technical complications of in-vacuum operation. We further characterize the randomly loaded atom array using the statistical theory of percolation phase transitions. This work takes an important first step toward a quantum computer at the 10,000-qubit scale.
The scalability of physical qubit numbers is a central challenge toward a universal fault-tolerant quantum computer. The inherent scalability of atom array quantum computers stems from the identical nature of atomic qubits, so the available qubit resource is primarily limited by the number of atoms that can be trapped and controlled. Here, we robustly trap 11,000 individual atoms in a tweezer array, thereby enabling the available qubit resource to reach the tens-of-thousands scale for the first time among all quantum computation platforms. This advance is enabled by a single metasurface, approximately 2 cm in diameter, that generates the entire tweezer array without the need for microscope objectives, thereby maximizing laser-power efficiency. The large aperture ensures a working distance of about 1.5 cm, allowing the metasurface to be placed outside the vacuum cell and avoiding the technical complications of in-vacuum operation. We further characterize the randomly loaded atom array using the statistical theory of percolation phase transitions. This work takes an important first step toward a quantum computer at the 10,000-qubit scale.
Scalability remains a major challenge in building practical fault-tolerant quantum computers. Currently, the largest number of qubits achieved across leading quantum platforms ranges from hundreds to thousands. In atom arrays, scalability is primarily constrained by the capacity to generate large numbers of optical tweezers, and conventional techniques using acousto-optic deflectors or spatial light modulators struggle to produce arrays much beyond ∼10,000 tweezers. Moreover, these methods require additional microscope objectives to focus the light into micrometer-sized spots, which further complicates system integration and scalability. Here, we demonstrate the experimental generation of an optical tweezer array containing 280×280 spots using a metasurface, nearly an order of magnitude more than most existing systems. The metasurface leverages a large number of subwavelength phase-control pixels to engineer the wavefront of the incident light, enabling both large-scale tweezer generation and direct focusing into micron-scale spots without the need for a microscope. This result shifts the scalability bottleneck for atom arrays from the tweezer generation hardware to the available laser power. Furthermore, the array shows excellent intensity uniformity exceeding 90%, making it suitable for homogeneous single-atom loading and paving the way for trapping arrays of more than 10,000 atoms in the near future.
Optical tweezer arrays 1,2 have transformed atomic and molecular physics, now forming the backbone for a range of leading experiments in quantum computing 3–8 , simulation 1,9–12 , and metrology 13–15 . Typical experiments trap tens to hundreds of atomic qubits, and recently systems with around one thousand atoms were realized without defining qubits or demonstrating coherent control 16–18 . However, scaling to thousands of atomic qubits with long coherence times, low-loss, and high-fidelity imaging is an outstanding challenge and critical for progress in quantum science, particularly towards quantum error correction 19,20 . Here, we experimentally realize an array of optical tweezers trapping over 6,100 neutral atoms in around 12,000 sites, simultaneously surpassing state-of-the-art performance for several metrics that underpin the success of the platform. Specifically, while scaling to such a large number of atoms, we demonstrate a coherence time of 12.6(1) seconds, a record for hyperfine qubits in an optical tweezer array. We show room-temperature trapping lifetimes of ~ 23 minutes, enabling record-high imaging survival of 99.98952(1)% with an imaging fidelity of over 99.99%. We present a plan for zone-based quantum computing 5,21 and demonstrate necessary coherence-preserving qubit transport and pick-up/drop-off operations on large spatial scales, characterized through interleaved randomized benchmarking. Our results, along with recent developments 8,22–24 , indicate that universal quantum computing and quantum error correction with thousands to tens of thousands of physical qubits could be a near-term prospect.
Arrays of single atoms trapped in optical tweezers are increasingly recognized as a promising platform for scalable quantum computing. In both the fault-tolerant and NISQ eras, the ability to individually control qubits is essential for the efficient execution of quantum circuits. Time-division multiplexed control schemes based on atom shuttling or beam scanning have been employed to build programmable neutral atom quantum processors, but achieving high-rate, highly parallel gate operations remains a challenge. Here, we propose a fiber array architecture for atom quantum computing capable of fully independent control of individual atoms. The trapping and addressing lasers for each individual atom are emitted from the same optical waveguide, enabling robust control through common-mode suppression of beam pointing noise. Using a fiber array, we experimentally demonstrate the trapping and independent control of ten single atoms in two-dimensional optical tweezers, achieving individually addressed single-qubit gates with an average fidelity of 0.9966(3). More significantly, we perform simultaneous arbitrary single-qubit gates on four randomly selected qubits, resulting in an average fidelity of 0.9961(4). Our work paves the way for time-efficient execution of quantum algorithms on neutral atom quantum computers.
Trapped neutral atoms are one of the leading platforms for quantum information technologies, in particular for quantum computing, but scaling them to array sizes needed for utility-scale quantum computing is a major engineering challenge. Here we review optical metasurfaces as an enabling technology that provides fine control over the phase, amplitude, and polarization of light, with pixel counts far exceeding what is available with spatial light modulators (SLMs) and other active devices. The large pixel counts have recently led to demonstrations of arrays of optical tweezers with hundreds of thousands of sites and arrays of optical bottle-beams with complex three-dimensional trapping profiles. The flexibility and scalability of optical metasurfaces provides a route towards miniaturized, integrated, and highly scalable atomic experiments and instruments.
Optical tweezer arrays of laser-cooled and individually controlled particles have revolutionized atomic, molecular, and optical physics. They afford exquisite capabilities for applications in quantum simulation of many-body physics, quantum computation, and sensing. Underlying this development is the technical maturity of generating scalable optical beams, enabled by active components and a high numerical aperture objective. However, such a complex combination of bulk optics outside the vacuum chamber is very sensitive to any vibration and drift. Here, we demonstrate the generation of a 3 × 3 static tweezer array with a single chip-scale multifunctional metasurface element in vacuum, replacing the meter-long free space optics. Fluorescence counts on the camera validate the successful trapping of the atomic ensemble array and showcase a promising strategy for integrated photonics with cold atom systems. The introduction of a polarization independent dual-wavelength metasurface significantly enhances fluorescence collection efficiency while reducing experimental complexity. This approach paves the way for scalable neutral atom platforms and offers a compelling route towards the realization of next generation quantum metasurfaces.
It is widely believed that tens of thousands of physical qubits are needed to build a practically useful quantum computer. Atom arrays formed by optical tweezers are among the most promising platforms for achieving this goal, owing to the excellent scalability and mobility of atomic qubits. However, assembling a defect-free atom array with ~ 10^4 qubits remains algorithmically challenging, alongside other hardware limitations. This is due to the computationally hard path-planning problems and the time-consuming generation of suffciently smooth trajectories for optical tweezer potentials by spatial light modulators (SLM). Here, we present a unified framework comprising two innovative components to fully address these algorithmic challenges: (1) a path-planning module that employs a supervised learning approach using a graph neural network combined with a modified auction decoder, and (2) a potential-generation module called the phase and profile-aware Weighted Gerchberg-Saxton algorithm. The inference time for the first module is nearly a size-independent constant overhead of ~ 5 ms, and the second module generates a potential frame with about 0.5 ms, a timescale shorter than the current commercial SLM refresh time. Altogether, our algorithm enables the assembly of an atom array with 10^4 qubits on a timescale much shorter than the typical vacuum lifetime of the trapped atoms.