Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.30261

Qubit-efficient variational algorithm for nuclear structure

Chandan Sarma, Paul Stevenson

nucl-thquant-phSubmitted May 28, 2026• Announced May 29, 2026• 0 citations
arXivHTMLPDF

Abstract

In this work, we compare three qubit-mapping strategies to study the structure of the nuclear ground state within the shell model description employing the Variational Quantum Eigensolver (VQE) approach. Although the initial point for different mappings is a Hamiltonian matrix in many-body particle basis or Slater determinant (SD) basis, the structure of the trial wavefunction and resource counts are different for each mapping. These three mappings are tested for a mid $p$-shell nucleus $^{10}$B and compared the quantum resources required to find the ground state for each mapping. Further, we extend the qubit-efficient mapping to study the ground state of one more mid $p$-shell nucleus $^{12}$C. We run circuits up to 26-qubits representing their ground states on a noisy simulator (IBM's FakeFez backend) and quantum hardware ($ibm\_fez$). The best post-error mitigated results from the hardware for $^{10}$B ground state is obtained following SD to qubit mapping with a percent error of 0.21 \%. The percent errors for the same state following cSD and pnSD mapping are 3.37 and 8.88 \%, respectively. On the other hand, following the cSD mapping, the post-error mitigated ground state energy of $^{12}$C is 6.82 \% away from the exact result. We further evaluate the fidelity of the VQE wavefunctions obtained from hardware with respect to the shell model wavefunctions for the cSD mapping. This cSD mapping can be useful for scaling the VQE algorithm for complex nuclei across different mass regions in terms of qubit efficiency.

Related papers

A low-circuit-depth quantum computing approach to the nuclear shell model

P. D. Stevenson, Chandan Sarma

Abstract In this work, we introduce a new qubit mapping strategy for the Variational Quantum Eigensolver (VQE) applied to nuclear shell model calculations, where each Slater determinant (SD) is mapped to a qubit, rather than assigning qubits to individual single-particle states. While this approach may increase the total number of qubits required in some cases, it enables the construction of simpler quantum circuits that are more compatible with current noisy intermediate-scale quantum (NISQ) devices. We apply this method to seven nuclei: Four lithium isotopes $^{6-9}$Li from the \textit{p}-shell, $^{18}$F from the \textit{sd}-shell, and two heavier nuclei ($^{210}$Po, and $^{210}$Pb). We run circuits representing their ground states on a noisy simulator (IBM's \textit{FakeFez} backend) and quantum hardware ($ibm\_pittsburgh$). For heavier nuclei, we demonstrate the feasibility of simulating $^{210}$Po and $^{210}$Pb as 22- and 29-qubit systems, respectively. Additionally, we employ Zero-Noise Extrapolation (ZNE) via two-qubit gate folding to mitigate errors in both simulated and hardware-executed results. Post-mitigation, the best results show less than 4 \% deviation from shell model predictions across all nuclei studied. This SD-based qubit mapping proves particularly effective for lighter nuclei and two-nucleon systems, offering a promising route for near-term quantum simulations in nuclear physics. PACS numbers: 21.60.Cs, 21.30.Fe, 21.10.Dr, 27.20.+n

•Nov 4, 2025•1 citation

A low-circuit-depth quantum computing approach to the nuclear shell model

Chandan Sarma, P. D. Stevenson

Abstract In this work, we introduce a new qubit mapping strategy for the Variational Quantum Eigensolver (VQE) applied to nuclear shell model calculations, where each Slater Determinant (SD) is mapped to a qubit, rather than assigning qubits to individual single-particle states. While this approach may increase the total number of qubits required in some cases, it enables the construction of simpler quantum circuits that are more compatible with current noisy intermediate-scale quantum (NISQ) devices. We apply this method to seven nuclei: Four lithium isotopes $${}^{6-9}$$ Li from the p -shell, $${}^{18}$$ F from the sd -shell, and two heavier nuclei ( $${}^{210}$$ Po, and $${}^{210}$$ Pb). We run circuits representing their ground states on a noisy simulator (IBM’s FakeFez backend) and quantum hardware ( $$ibm\_pittsburgh$$ ). For heavier nuclei, we demonstrate the feasibility of simulating $${}^{210}$$ Po and $${}^{210}$$ Pb as 22- and 29-qubit systems, respectively. Additionally, we employ Zero-Noise Extrapolation (ZNE) via two-qubit gate folding to mitigate errors in both simulated and hardware-executed results. Post-mitigation, the best results show less than 4 % deviation from shell model binding energy predictions across all nuclei studied. This SD-based qubit mapping proves particularly effective for lighter nuclei and two-nucleon systems, offering a promising route for near-term quantum simulations in nuclear physics.

arXiv:2510.02124•Discover Quantum Science•Feb 17, 2026•6 citations

Nuclear shell-model simulation in digital quantum computers

Axel Pérez-Obiol, A. M. Romero, J. Menéndez +3 more

The nuclear shell model is one of the prime many-body methods to study the structure of atomic nuclei, but it is hampered by an exponential scaling on the basis size as the number of particles increases. We present a shell-model quantum circuit design strategy to find nuclear ground states by exploiting an adaptive variational quantum eigensolver algorithm. Our circuit implementation is in excellent agreement with classical shell-model simulations for a dozen of light and medium-mass nuclei, including neon and calcium isotopes. We quantify the circuit depth, width and number of gates to encode realistic shell-model wavefunctions. Our strategy also addresses explicitly energy measurements and the required number of circuits to perform them. Our simulated circuits approach the benchmark results exponentially with a polynomial scaling in quantum resources for each nucleus. This work paves the way for quantum computing shell-model studies across the nuclear chart and our quantum resource quantification may be used in configuration-interaction calculations of other fermionic systems.

arXiv:2302.03641•Scientific Reports•Jul 29, 2023•59 citations

Advancing quantum simulations of the nuclear shell model with Gray-code–based resource-efficient protocols

Nifeeya Singh, Pooja Siwach, P. Arumugam

Some of the computational limitations in solving the nuclear many-body problem could be overcome by utilizing quantum computers. The nuclear shell-model calculations providing deeper insights into the properties of atomic nuclei, is one such case with high demand for resources as the size of the Hilbert space grows exponentially with the number of particles involved. Quantum algorithms are being developed to overcome these challenges and advance such calculations. To develop quantum circuits for the nuclear shell-model, leveraging the capabilities of noisy intermediate-scale quantum (NISQ) devices. We aim to minimize resource requirements (specifically in terms of qubits and gates) and strive to reduce the impact of noise by employing relevant mitigation techniques. We achieve noise resilience by designing an optimized ansatz for the variational quantum eigensolver (VQE) based on Givens rotations and incorporating qubit-ADAPT-VQE in combination with variational quantum deflation (VQD) to compute ground and excited states incorporating the zero-noise extrapolation mitigation technique. Furthermore, the qubit requirements are significantly reduced by mapping the basis states to qubits using Gray code encoding and generalizing transformations of fermionic operators to efficiently represent manybody states. By employing the noise-resilient protocols, we achieve the ground and excited state energy levels of 38Ar and 6Li with better accuracy. These energy levels are presented for noiseless simulations, noisy conditions, and after applying noise mitigation techniques. Results are compared for Jordan Wigner and Gray code encoding using VQE, qubit-ADAPT-VQE, and VQD. Our work highlights the potential of noise-resilient protocols to leverage the full potential of NISQ devices in scaling the nuclear shell model calculations.

arXiv:2504.11689•Physical Review C•Aug 15, 2025•12 citations

Comparison of variational quantum eigensolvers in light nuclei

Miquel Carrasco-Codina, Emanuele Costa, Antonio Márquez Romero +2 more

Quantum computing is one of the most promising technologies of the near future, and the simulation of quantum many-body systems is a natural application. In this work, we present classical simulations of the ground states of light atomic nuclei within the p shell, from He 6 to B 10 , calculated within the nuclear shell model. We compare the performance of two leading variational quantum eigensolver algorithms: the unitary coupled cluster (UCC) and the adaptive derivative-assembled pseudo-Trotter (ADAPT) methods, introducing a new metric to quantify the use of quantum resources in each simulation. We find that Slater determinants are the most useful reference states for both approaches. Our analysis suggests that ADAPT is more efficient for nuclei close to magic numbers, while UCC tends to require fewer resources toward the mid shell. This work lays the groundwork for robust benchmarking of quantum algorithms in nuclear structure studies.

arXiv:2507.13819•Physical Review C•Oct 20, 2025•14 citations

Quantum simulations in effective model spaces: Hamiltonian-learning variational quantum eigensolver using digital quantum computers and application to the Lipkin-Meshkov-Glick model

Caroline Robin, Martin J. Savage A

Background: Quantum simulations offer the potential to predict the structure and dynamics of nuclear many-body systems that are beyond the capabilities of classical computing. Generally, preparing the ground state of strongly interacting many-body systems relevant to nuclear physics is, however, inefficient, even using ideal quantum computers. In addition, currently available noisy intermediate-scale quantum (NISQ) era quantum devices possess modest numbers of qubits, limiting the size of quantum many-body systems that can be simulated. In this context, a reformulation of the quantum many-body problems using truncated model spaces and Hamiltonians is desirable to make them more amenable to near-term quantum computers. The importance of symmetries in low-energy theories, including effective field theories (EFTs), lattice quantum chromodynamics (QCD), and effective model spaces for nuclear systems, in particular their interplay with the reduction of active Hilbert spaces, is well known. Lesser known is the fact that the noncommutivity of some symmetries and truncations of the model space can be profitably combined with variational calculations to rearrange the entanglement into localized structures and enable more efficient simulations.Purpose: The goal of the present study is to explore and utilize the noncommutivity of symmetries and model-space truncations of quantum many-body systems important to nuclear physics, particularly in combination with variational algorithms for quantum simulations and effective Hamiltonian learning.Method: We introduce an iterative hybrid classical-quantum algorithm, the Hamiltonian learning variational quantum eigensolver (HL-VQE), that simultaneously optimizes an effective Hamiltonian, thereby rearranging entanglement into the effective model space, and the associated ground-state wave function. Quantum simulations, using classical computers and IBM's superconducting-qubit quantum computers, are performed to demonstrate the HL-VQE algorithm, in the context of the Lipkin-Meshkov-Glick (LMG) model of interacting fermions, where the Hamiltonian transformation corresponds to an orbital rotation. We use a mapping where the number of qubits scales with the $\mathrm{logarithm}$ of the size of the effective model space, rather than the particle number.Results: HL-VQE is found to provide an exponential improvement in LMG-model calculations of the ground-state energy and wave function, compared to naive truncations without Hamiltonian learning, throughout a significant fraction of the Hilbert space. In the context of EFT, this corresponds to counterterms scaling exponentially with the cutoff as opposed to power law. Implementations on IBM's QExperience quantum computers and simulators for one- and two-qubit effective model spaces are shown to provide accurate and precise results, reproducing classical predictions.Conclusions: For a range of parameters defining the LMG model, the HL-VQE algorithm is found to have better scaling of quantum resources requirements than previously explored algorithms. In particular, the HL-VQE scales efficiently over a large fraction of the model space, in contrast to VQE alone. This work constitutes a step in the development of entanglement-driven quantum algorithms for descriptions of nuclear many-body systems. This, in part, leverages the potential of noisy intermediate-scale quantum (NISQ) devices. The exponential scaling of counterterms observed in this study suggests the possibility of more general applicability to other nonperturbative EFTs.

arXiv:2301.05976•Physical Review C•Aug 18, 2023•48 citations
In this work, we compare three qubit-mapping strategies to study the structure of the nuclear ground state within the shell model description employing the Variational Quantum Eigensolver (VQE) approach. Although the initial point for different mappings is a Hamiltonian matrix in many-body particle basis or Slater determinant (SD) basis, the structure of the trial wavefunction and resource counts are different for each mapping. These three mappings are tested for a mid ppp-shell nucleus 10^{10}10B and compared the quantum resources required to find the ground state for each mapping. Further, we extend the qubit-efficient mapping to study the ground state of one more mid ppp-shell nucleus 12^{12}12C. We run circuits up to 26-qubits representing their ground states on a noisy simulator (IBM's FakeFez backend) and quantum hardware (ibm_fezibm\_fezibm_fez). The best post-error mitigated results from the hardware for 10^{10}10B ground state is obtained following SD to qubit mapping with a percent error of 0.21 %. The percent errors for the same state following cSD and pnSD mapping are 3.37 and 8.88 %, respectively. On the other hand, following the cSD mapping, the post-error mitigated ground state energy of 12^{12}12C is 6.82 % away from the exact result. We further evaluate the fidelity of the VQE wavefunctions obtained from hardware with respect to the shell model wavefunctions for the cSD mapping. This cSD mapping can be useful for scaling the VQE algorithm for complex nuclei across different mass regions in terms of qubit efficiency.
Abstract In this work, we introduce a new qubit mapping strategy for the Variational Quantum Eigensolver (VQE) applied to nuclear shell model calculations, where each Slater determinant (SD) is mapped to a qubit, rather than assigning qubits to individual single-particle states. While this approach may increase the total number of qubits required in some cases, it enables the construction of simpler quantum circuits that are more compatible with current noisy intermediate-scale quantum (NISQ) devices. We apply this method to seven nuclei: Four lithium isotopes 6−9^{6-9}6−9Li from the \textit{p}-shell, 18^{18}18F from the \textit{sd}-shell, and two heavier nuclei (210^{210}210Po, and 210^{210}210Pb). We run circuits representing their ground states on a noisy simulator (IBM's \textit{FakeFez} backend) and quantum hardware (ibm_pittsburghibm\_pittsburghibm_pittsburgh). For heavier nuclei, we demonstrate the feasibility of simulating 210^{210}210Po and 210^{210}210Pb as 22- and 29-qubit systems, respectively. Additionally, we employ Zero-Noise Extrapolation (ZNE) via two-qubit gate folding to mitigate errors in both simulated and hardware-executed results. Post-mitigation, the best results show less than 4 \% deviation from shell model predictions across all nuclei studied. This SD-based qubit mapping proves particularly effective for lighter nuclei and two-nucleon systems, offering a promising route for near-term quantum simulations in nuclear physics. PACS numbers: 21.60.Cs, 21.30.Fe, 21.10.Dr, 27.20.+n
Abstract In this work, we introduce a new qubit mapping strategy for the Variational Quantum Eigensolver (VQE) applied to nuclear shell model calculations, where each Slater Determinant (SD) is mapped to a qubit, rather than assigning qubits to individual single-particle states. While this approach may increase the total number of qubits required in some cases, it enables the construction of simpler quantum circuits that are more compatible with current noisy intermediate-scale quantum (NISQ) devices. We apply this method to seven nuclei: Four lithium isotopes 6−9{}^{6-9}6−9 Li from the p -shell, 18{}^{18}18 F from the sd -shell, and two heavier nuclei ( 210{}^{210}210 Po, and 210{}^{210}210 Pb). We run circuits representing their ground states on a noisy simulator (IBM’s FakeFez backend) and quantum hardware ( ibm_pittsburghibm\_pittsburghibm_pittsburgh ). For heavier nuclei, we demonstrate the feasibility of simulating 210{}^{210}210 Po and 210{}^{210}210 Pb as 22- and 29-qubit systems, respectively. Additionally, we employ Zero-Noise Extrapolation (ZNE) via two-qubit gate folding to mitigate errors in both simulated and hardware-executed results. Post-mitigation, the best results show less than 4 % deviation from shell model binding energy predictions across all nuclei studied. This SD-based qubit mapping proves particularly effective for lighter nuclei and two-nucleon systems, offering a promising route for near-term quantum simulations in nuclear physics.
The nuclear shell model is one of the prime many-body methods to study the structure of atomic nuclei, but it is hampered by an exponential scaling on the basis size as the number of particles increases. We present a shell-model quantum circuit design strategy to find nuclear ground states by exploiting an adaptive variational quantum eigensolver algorithm. Our circuit implementation is in excellent agreement with classical shell-model simulations for a dozen of light and medium-mass nuclei, including neon and calcium isotopes. We quantify the circuit depth, width and number of gates to encode realistic shell-model wavefunctions. Our strategy also addresses explicitly energy measurements and the required number of circuits to perform them. Our simulated circuits approach the benchmark results exponentially with a polynomial scaling in quantum resources for each nucleus. This work paves the way for quantum computing shell-model studies across the nuclear chart and our quantum resource quantification may be used in configuration-interaction calculations of other fermionic systems.
Some of the computational limitations in solving the nuclear many-body problem could be overcome by utilizing quantum computers. The nuclear shell-model calculations providing deeper insights into the properties of atomic nuclei, is one such case with high demand for resources as the size of the Hilbert space grows exponentially with the number of particles involved. Quantum algorithms are being developed to overcome these challenges and advance such calculations. To develop quantum circuits for the nuclear shell-model, leveraging the capabilities of noisy intermediate-scale quantum (NISQ) devices. We aim to minimize resource requirements (specifically in terms of qubits and gates) and strive to reduce the impact of noise by employing relevant mitigation techniques. We achieve noise resilience by designing an optimized ansatz for the variational quantum eigensolver (VQE) based on Givens rotations and incorporating qubit-ADAPT-VQE in combination with variational quantum deflation (VQD) to compute ground and excited states incorporating the zero-noise extrapolation mitigation technique. Furthermore, the qubit requirements are significantly reduced by mapping the basis states to qubits using Gray code encoding and generalizing transformations of fermionic operators to efficiently represent manybody states. By employing the noise-resilient protocols, we achieve the ground and excited state energy levels of 38Ar and 6Li with better accuracy. These energy levels are presented for noiseless simulations, noisy conditions, and after applying noise mitigation techniques. Results are compared for Jordan Wigner and Gray code encoding using VQE, qubit-ADAPT-VQE, and VQD. Our work highlights the potential of noise-resilient protocols to leverage the full potential of NISQ devices in scaling the nuclear shell model calculations.
Quantum computing is one of the most promising technologies of the near future, and the simulation of quantum many-body systems is a natural application. In this work, we present classical simulations of the ground states of light atomic nuclei within the p shell, from He 6 to B 10 , calculated within the nuclear shell model. We compare the performance of two leading variational quantum eigensolver algorithms: the unitary coupled cluster (UCC) and the adaptive derivative-assembled pseudo-Trotter (ADAPT) methods, introducing a new metric to quantify the use of quantum resources in each simulation. We find that Slater determinants are the most useful reference states for both approaches. Our analysis suggests that ADAPT is more efficient for nuclei close to magic numbers, while UCC tends to require fewer resources toward the mid shell. This work lays the groundwork for robust benchmarking of quantum algorithms in nuclear structure studies.
Background: Quantum simulations offer the potential to predict the structure and dynamics of nuclear many-body systems that are beyond the capabilities of classical computing. Generally, preparing the ground state of strongly interacting many-body systems relevant to nuclear physics is, however, inefficient, even using ideal quantum computers. In addition, currently available noisy intermediate-scale quantum (NISQ) era quantum devices possess modest numbers of qubits, limiting the size of quantum many-body systems that can be simulated. In this context, a reformulation of the quantum many-body problems using truncated model spaces and Hamiltonians is desirable to make them more amenable to near-term quantum computers. The importance of symmetries in low-energy theories, including effective field theories (EFTs), lattice quantum chromodynamics (QCD), and effective model spaces for nuclear systems, in particular their interplay with the reduction of active Hilbert spaces, is well known. Lesser known is the fact that the noncommutivity of some symmetries and truncations of the model space can be profitably combined with variational calculations to rearrange the entanglement into localized structures and enable more efficient simulations.Purpose: The goal of the present study is to explore and utilize the noncommutivity of symmetries and model-space truncations of quantum many-body systems important to nuclear physics, particularly in combination with variational algorithms for quantum simulations and effective Hamiltonian learning.Method: We introduce an iterative hybrid classical-quantum algorithm, the Hamiltonian learning variational quantum eigensolver (HL-VQE), that simultaneously optimizes an effective Hamiltonian, thereby rearranging entanglement into the effective model space, and the associated ground-state wave function. Quantum simulations, using classical computers and IBM's superconducting-qubit quantum computers, are performed to demonstrate the HL-VQE algorithm, in the context of the Lipkin-Meshkov-Glick (LMG) model of interacting fermions, where the Hamiltonian transformation corresponds to an orbital rotation. We use a mapping where the number of qubits scales with the logarithm\mathrm{logarithm}logarithm of the size of the effective model space, rather than the particle number.Results: HL-VQE is found to provide an exponential improvement in LMG-model calculations of the ground-state energy and wave function, compared to naive truncations without Hamiltonian learning, throughout a significant fraction of the Hilbert space. In the context of EFT, this corresponds to counterterms scaling exponentially with the cutoff as opposed to power law. Implementations on IBM's QExperience quantum computers and simulators for one- and two-qubit effective model spaces are shown to provide accurate and precise results, reproducing classical predictions.Conclusions: For a range of parameters defining the LMG model, the HL-VQE algorithm is found to have better scaling of quantum resources requirements than previously explored algorithms. In particular, the HL-VQE scales efficiently over a large fraction of the model space, in contrast to VQE alone. This work constitutes a step in the development of entanglement-driven quantum algorithms for descriptions of nuclear many-body systems. This, in part, leverages the potential of noisy intermediate-scale quantum (NISQ) devices. The exponential scaling of counterterms observed in this study suggests the possibility of more general applicability to other nonperturbative EFTs.