Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.29723

Treewidth-Aware Gate Cut Selection for Reducing Transpilation Overhead on Superconducting Quantum Devices

Hana Ebi, Shin Nishio, Takahiko Satoh

quant-phSubmitted May 28, 2026• Announced May 29, 2026• 0 citations
arXivHTMLPDF

Abstract

On superconducting quantum devices with sparse qubit connectivity, transpilation of long-range two-qubit interactions inserts additional SWAP gates, increasing hardware cost and execution error. Gate cutting via quasi-probability decomposition (QPD) can remove a selected two-qubit gate and thereby reduce routing overhead, but its sampling cost makes cut placement critical. We propose TW2S, a graph-only two-stage gate-cut selection method that operates on the circuit interaction graph without backend-specific transpilation at selection time. Stage 1 analyzes a min-fill elimination trace and scores edges by their contribution to a treewidth upper bound. Stage 2 ranks the resulting candidates by edge betweenness centrality with a degree penalty to identify routing bottlenecks. Across grid, Watts-Strogatz, barbell, and stochastic block model benchmarks transpiled to IBM's FakeSherbrooke backend, TW2S consistently outperforms random cut selection when the interaction graph contains identifiable sparse cuts. The advantage is governed not by absolute graph density but by moderate community structure and accessible inter-community edges. We further derive a mean-squared-error breakeven condition showing that, under a shared total shot budget, QPD is beneficial only when the ECR reduction is large enough and the signal strength is sufficient. Under an expanded per-subcircuit budget the signal-strength requirement is substantially relaxed. In noisy simulations of the J1-J2 transverse-field Ising model, TW2S achieves $Δ$ECR = 47 for n = 8, compared with approximately 9 for random selection, and yields lower estimation error than the uncut baseline in the tested strong-signal regime, with larger gains at increased shot budgets. These results position graph-structural cut selection as a practical compiler-side tool for turning circuit cutting into a targeted routing-reduction strategy.

Comments
16 pages, 11 figures

Related papers

Efficient Circuit Transpilation of Commuting Gates on 2D Grids

Sabina Drăgoi, Daniel J. Egger

Combinatorial optimization problems are central to many applications but can be challenging to solve. Quantum approaches such as the Quantum Approximate Optimization Algorithm (QAOA) offer new tools with which to tackle such problems. However, QAOA circuits inherit the interaction structure of the target Hamiltonian, often resulting in deep circuits when compiled onto hardware with limited connectivity. Efficient transpilation is therefore critical to their practical performance. In this work, we propose a transpilation scheme for circuits consisting of blocks of commuting two-qubit gates on two-dimensional lattices. Unlike standard approaches based on random initial mappings and fixed routing, our method alternates between constructing problem-dependent SWAP-layer sequences and updating the qubit layout. By adapting the routing to the required interactions, this yields significantly shorter circuits for graphs with few edges. We benchmark our approach on QAOA instances for Maximum Cut (MC) on Random Regular graphs and Maximum Independent Set (MIS) on Erdős-Rényi graphs. Compared to standard methods, we reduce circuit depth and gate count by about a factor of two, enabling experiments with up to $80$ qubits and improving approximation ratios by up to $6.6\%$ for MC and $9.3\%$ for MIS.

quant-pharXiv:2607.10274•Jul 14, 2026•2 citations

Noise-aware selection of circuit cutting strategies under hardware noise non-uniformity

Debarthi Pal, Ritajit Majumdar, Padmanabha Venkatagiri Seshadri +2 more

Noise in contemporary quantum hardware is highly non-uniform across qubits and couplers, giving rise to localized low-noise "islands" within otherwise noisy device topologies. As quantum workloads scale, executions are increasingly forced to traverse high-noise regions, degrading algorithmic fidelity. Circuit cutting provides a route to circumvent such regions by decomposing large circuits into smaller subcircuits, but its practicality is limited by exponential sampling overhead and the lack of systematic guidance on how cut strategies should align with heterogeneous hardware noise. In this work, we present a hardware-noise-aware circuit cutting framework that explicitly exploits the spatial non-uniformity of noise in quantum devices. Rather than proposing a new cut-finding algorithm, we formalize the problem of device-constraint selection under realistic hardware noise and show that this choice critically determines both execution overhead and effective noise. Using a unified gate- and wire-cutting formulation, we demonstrate that small, hardware-informed relaxations in the device constraint yield exponential reductions in execution overhead while preserving alignment with low-noise hardware regions. Across representative workloads, our method achieves an average reduction in the number of circuit executions ranging from 5-54x for 20-qubit circuits, and enables tractable circuit cutting for 50-qubit circuits and application-level benchmarks where conventional strategies incur prohibitive overhead. These results establish noise-aware device-constraint selection as a necessary ingredient for making circuit cutting resource-efficient and practically deployable on contemporary quantum hardware.

quant-pharXiv:2604.24422•Apr 28, 2026•2 citations

Entanglement-Capability-Aware Finite-Bond Circuit Cutting for Distributed Quantum Computing

Weidong Liu, Qingqing Jiang, Yufu Liu +4 more

Distributed quantum computing distributes workloads that exceed a single processor's capacity across resource-constrained components. Circuit cutting enables this decomposition, but its effectiveness depends on partition choice. We present SACE, a Simulation-Aware Circuit Partitioning framework with Entanglement-Capability-Aware Screening. EP-Cost screens partitions using a parameter-dependent entanglement-capability proxy and native implementation cost. Under reconstruction constraints, finite-bond refinement selects the candidate that minimizes the worst-subcircuit discrepancy between normalized MPS simulations at bond dimensions $χ$ and $2χ$. Across 14 exhaustively enumerated small-scale candidate spaces, EP-Cost-guided genetic algorithm selections attain co-optimal native quasiprobability decomposition (QPD) overhead, with a median within-circuit Spearman correlation of 0.9965 between EP-Cost and QPD overhead. At matched cut counts, EP-Cost reduces QPD overhead by $25.20\times$ and $16.89\times$ for 8- and 9-qubit QFT circuits, respectively, and improves sampled reconstruction. On 12-qubit approximate QFT, deterministic reconstruction reduces Pauli-observable mean absolute error in all six low-bond conditions and total-variation distance in five. With five cuts and 7,776 QPD terms, SACE is best on all four reconstruction metrics in four of six conditions. At 24 qubits, SACE improves exact-local QFT accuracy in all 30 instance-bond-dimension conditions against each EP-Cost-only, Kernighan-Lin, and spectral baseline. The 50-qubit QFT comparisons remain favorable as reference convergence improves. Weighted QAOA circuits provide complementary, more bond-sensitive evidence. Refinement benefits persist across three search methods; larger candidate panels improve the optimized proxy without guaranteeing lower exact-local error.

quant-pharXiv:2610.14580•Oct 13, 2026•0 citations

Quantum Circuit Pruning: Improving Fidelity via Compilation-Aware Circuit Approximation

Pau Escofet, Santiago Rodrigo, Rohit Sarma Sarkar +3 more

This work presents a routing-aware pruning strategy for quantum circuits executed on Noisy Intermediate-Scale Quantum (NISQ) devices. We propose a method to remove parametric controlled rotations whose small rotation angles do not justify the routing overhead required for their implementation. By selectively pruning such gates, the method mitigates fidelity loss arising from additional SWAP operations introduced during compilation. Our approach evaluates whether executing a gate leads to greater fidelity loss than omitting it. Simulations on benchmark circuits with realistic noise models show that the method reduces two-qubit gate counts (up to 48.6%) while improving final state fidelity (up to 47.7%), especially for larger circuits where routing costs dominate.

quant-pharXiv:2601.13322•IEEE International Symposium on Circuits and Systems proceedings•Jan 21, 2026•4 citations

Quantum Circuit Pruning: From NISQ Architectures to Fault-Tolerant Operations

Pau Escofet, Carmen G. Almudéver, Sergi Abadal +1 more

We present a routing-aware pruning strategy for quantum circuits that selectively removes parametric two-qubit gates whose computational contribution is outweighed by the fidelity cost of their execution, and assess it across both Noisy Intermediate-Scale Quantum (NISQ) and fault-tolerant quantum computing (FTQC) architectures. Each two-qubit gate of a circuit is evaluated by comparing an architecture-independent lower bound on the fidelity cost of omitting the gate against a hardware-specific model for the routing execution cost in each setting. We additionally provide an analytical characterization of the pruning boundary as a function of rotation angle, qubit distance, and hardware noise. Simulations on benchmark circuits demonstrate gate count reductions of up to 48.6% and fidelity improvements of up to 47.7% in the NISQ regime, while a feasibility analysis on FT hardware indicates that pruning is expected to remain relevant across a range of code distances and physical error rates. These results establish routing-aware pruning as a practical and unified compilation strategy across the quantum computing stack.

quant-pharXiv:2610.00669•IEEE Transactions on Circuits & Systems II Express Briefs•Oct 2, 2026•0 citations

Scalable Circuit Cutting: A Framework for Combined Gate and Wire Cuts Using Gate Groups

Fiona Jiali Fröhler, Yannick Stade, Christian Ufrecht +2 more

Quantum circuit cutting enables the execution of large circuits on devices with a limited number of qubits by partitioning circuits into independent subcircuits. However, this introduces a sampling overhead, which grows exponentially with the number of cuts, rendering the choice of cut placements critical for practical circuit cutting. Determining optimal cut placements remains computationally challenging, particularly as circuits grow in size. Additionally, existing circuit cutting approaches typically treat gate and wire cuts independently. Those combining both cutting approaches, however, do not take advantage of joint cutting, i.e., identifying common gate groups and cutting them jointly for a reduced overhead. This work presents a unified framework that combines gate and wire cutting within a single partitioning strategy, enabling more efficient circuit decompositions. Moreover, our approach incorporates joint cutting via a novel gate grouping technique, further reducing sampling overhead. By formulating the cut placement problem as a scalable graph partitioning task, our method efficiently identifies near-optimal cut placements for large circuits, also providing diagnostic feedback on whether circuits are suitable for cutting.

quant-pharXiv:2608.05287•Aug 7, 2026•0 citations
On superconducting quantum devices with sparse qubit connectivity, transpilation of long-range two-qubit interactions inserts additional SWAP gates, increasing hardware cost and execution error. Gate cutting via quasi-probability decomposition (QPD) can remove a selected two-qubit gate and thereby reduce routing overhead, but its sampling cost makes cut placement critical. We propose TW2S, a graph-only two-stage gate-cut selection method that operates on the circuit interaction graph without backend-specific transpilation at selection time. Stage 1 analyzes a min-fill elimination trace and scores edges by their contribution to a treewidth upper bound. Stage 2 ranks the resulting candidates by edge betweenness centrality with a degree penalty to identify routing bottlenecks. Across grid, Watts-Strogatz, barbell, and stochastic block model benchmarks transpiled to IBM's FakeSherbrooke backend, TW2S consistently outperforms random cut selection when the interaction graph contains identifiable sparse cuts. The advantage is governed not by absolute graph density but by moderate community structure and accessible inter-community edges. We further derive a mean-squared-error breakeven condition showing that, under a shared total shot budget, QPD is beneficial only when the ECR reduction is large enough and the signal strength is sufficient. Under an expanded per-subcircuit budget the signal-strength requirement is substantially relaxed. In noisy simulations of the J1-J2 transverse-field Ising model, TW2S achieves ΔΔΔECR = 47 for n = 8, compared with approximately 9 for random selection, and yields lower estimation error than the uncut baseline in the tested strong-signal regime, with larger gains at increased shot budgets. These results position graph-structural cut selection as a practical compiler-side tool for turning circuit cutting into a targeted routing-reduction strategy.
Combinatorial optimization problems are central to many applications but can be challenging to solve. Quantum approaches such as the Quantum Approximate Optimization Algorithm (QAOA) offer new tools with which to tackle such problems. However, QAOA circuits inherit the interaction structure of the target Hamiltonian, often resulting in deep circuits when compiled onto hardware with limited connectivity. Efficient transpilation is therefore critical to their practical performance. In this work, we propose a transpilation scheme for circuits consisting of blocks of commuting two-qubit gates on two-dimensional lattices. Unlike standard approaches based on random initial mappings and fixed routing, our method alternates between constructing problem-dependent SWAP-layer sequences and updating the qubit layout. By adapting the routing to the required interactions, this yields significantly shorter circuits for graphs with few edges. We benchmark our approach on QAOA instances for Maximum Cut (MC) on Random Regular graphs and Maximum Independent Set (MIS) on Erdős-Rényi graphs. Compared to standard methods, we reduce circuit depth and gate count by about a factor of two, enabling experiments with up to 808080 qubits and improving approximation ratios by up to 6.6%6.6\%6.6% for MC and 9.3%9.3\%9.3% for MIS.
Noise in contemporary quantum hardware is highly non-uniform across qubits and couplers, giving rise to localized low-noise "islands" within otherwise noisy device topologies. As quantum workloads scale, executions are increasingly forced to traverse high-noise regions, degrading algorithmic fidelity. Circuit cutting provides a route to circumvent such regions by decomposing large circuits into smaller subcircuits, but its practicality is limited by exponential sampling overhead and the lack of systematic guidance on how cut strategies should align with heterogeneous hardware noise. In this work, we present a hardware-noise-aware circuit cutting framework that explicitly exploits the spatial non-uniformity of noise in quantum devices. Rather than proposing a new cut-finding algorithm, we formalize the problem of device-constraint selection under realistic hardware noise and show that this choice critically determines both execution overhead and effective noise. Using a unified gate- and wire-cutting formulation, we demonstrate that small, hardware-informed relaxations in the device constraint yield exponential reductions in execution overhead while preserving alignment with low-noise hardware regions. Across representative workloads, our method achieves an average reduction in the number of circuit executions ranging from 5-54x for 20-qubit circuits, and enables tractable circuit cutting for 50-qubit circuits and application-level benchmarks where conventional strategies incur prohibitive overhead. These results establish noise-aware device-constraint selection as a necessary ingredient for making circuit cutting resource-efficient and practically deployable on contemporary quantum hardware.
Distributed quantum computing distributes workloads that exceed a single processor's capacity across resource-constrained components. Circuit cutting enables this decomposition, but its effectiveness depends on partition choice. We present SACE, a Simulation-Aware Circuit Partitioning framework with Entanglement-Capability-Aware Screening. EP-Cost screens partitions using a parameter-dependent entanglement-capability proxy and native implementation cost. Under reconstruction constraints, finite-bond refinement selects the candidate that minimizes the worst-subcircuit discrepancy between normalized MPS simulations at bond dimensions χχχ and 2χ2χ2χ. Across 14 exhaustively enumerated small-scale candidate spaces, EP-Cost-guided genetic algorithm selections attain co-optimal native quasiprobability decomposition (QPD) overhead, with a median within-circuit Spearman correlation of 0.9965 between EP-Cost and QPD overhead. At matched cut counts, EP-Cost reduces QPD overhead by 25.20×25.20\times25.20× and 16.89×16.89\times16.89× for 8- and 9-qubit QFT circuits, respectively, and improves sampled reconstruction. On 12-qubit approximate QFT, deterministic reconstruction reduces Pauli-observable mean absolute error in all six low-bond conditions and total-variation distance in five. With five cuts and 7,776 QPD terms, SACE is best on all four reconstruction metrics in four of six conditions. At 24 qubits, SACE improves exact-local QFT accuracy in all 30 instance-bond-dimension conditions against each EP-Cost-only, Kernighan-Lin, and spectral baseline. The 50-qubit QFT comparisons remain favorable as reference convergence improves. Weighted QAOA circuits provide complementary, more bond-sensitive evidence. Refinement benefits persist across three search methods; larger candidate panels improve the optimized proxy without guaranteeing lower exact-local error.
This work presents a routing-aware pruning strategy for quantum circuits executed on Noisy Intermediate-Scale Quantum (NISQ) devices. We propose a method to remove parametric controlled rotations whose small rotation angles do not justify the routing overhead required for their implementation. By selectively pruning such gates, the method mitigates fidelity loss arising from additional SWAP operations introduced during compilation. Our approach evaluates whether executing a gate leads to greater fidelity loss than omitting it. Simulations on benchmark circuits with realistic noise models show that the method reduces two-qubit gate counts (up to 48.6%) while improving final state fidelity (up to 47.7%), especially for larger circuits where routing costs dominate.
We present a routing-aware pruning strategy for quantum circuits that selectively removes parametric two-qubit gates whose computational contribution is outweighed by the fidelity cost of their execution, and assess it across both Noisy Intermediate-Scale Quantum (NISQ) and fault-tolerant quantum computing (FTQC) architectures. Each two-qubit gate of a circuit is evaluated by comparing an architecture-independent lower bound on the fidelity cost of omitting the gate against a hardware-specific model for the routing execution cost in each setting. We additionally provide an analytical characterization of the pruning boundary as a function of rotation angle, qubit distance, and hardware noise. Simulations on benchmark circuits demonstrate gate count reductions of up to 48.6% and fidelity improvements of up to 47.7% in the NISQ regime, while a feasibility analysis on FT hardware indicates that pruning is expected to remain relevant across a range of code distances and physical error rates. These results establish routing-aware pruning as a practical and unified compilation strategy across the quantum computing stack.
Quantum circuit cutting enables the execution of large circuits on devices with a limited number of qubits by partitioning circuits into independent subcircuits. However, this introduces a sampling overhead, which grows exponentially with the number of cuts, rendering the choice of cut placements critical for practical circuit cutting. Determining optimal cut placements remains computationally challenging, particularly as circuits grow in size. Additionally, existing circuit cutting approaches typically treat gate and wire cuts independently. Those combining both cutting approaches, however, do not take advantage of joint cutting, i.e., identifying common gate groups and cutting them jointly for a reduced overhead. This work presents a unified framework that combines gate and wire cutting within a single partitioning strategy, enabling more efficient circuit decompositions. Moreover, our approach incorporates joint cutting via a novel gate grouping technique, further reducing sampling overhead. By formulating the cut placement problem as a scalable graph partitioning task, our method efficiently identifies near-optimal cut placements for large circuits, also providing diagnostic feedback on whether circuits are suitable for cutting.