The ability to control the charge and spin states of nitrogen-vacancy (NV) centers near the diamond surface is of pivotal importance for quantum applications. Hydrogen-terminated diamond is promising for long spin coherence times and ease of controlling the charge states due to the low density of surface defects. However, it has so far been challenging to create negatively charged single NV centers with controllable spin states beneath a hydrogen-terminated surface because atmospheric adsorbates that act as acceptors induce surface holes. In this study, we optically detected the magnetic resonance of shallow single NV centers in hydrogen-terminated diamond through precise control of the nitrogen implantation fluence. Furthermore, we found that the probability of detecting the resonance was enhanced by reducing the surface acceptor density through passivation of the hydrogen-terminated surface with hexagonal boron nitride without air exposure. This control method opens up new opportunities for using NV centers in quantum applications.
Abstract We propose a quantum science platform utilizing the dipole-dipole coupling between donor-acceptor pairs (DAPs) in wide bandgap semiconductors to realize optically controllable, long-range interactions between defects in the solid state. We carry out calculations based on density functional theory (DFT) to investigate the electronic structure and interactions of DAPs formed by various substitutional point-defects in diamond and silicon carbide (SiC). We determine the most stable charge states and evaluate zero phonon lines using constrained DFT and compare our results with those of simple donor-acceptor pair (DAP) models. We show that polarization differences between ground and excited states lead to unusually large electric dipole moments for several DAPs in diamond and SiC. We predict photoluminescence spectra for selected substitutional atoms and show that while B-N pairs in diamond are challenging to control due to their large electron-phonon coupling, DAPs in SiC, especially Al-N pairs, are suitable candidates to realize long-range optically controllable interactions.
The static electric dipole–dipole coupling between donor–acceptor pairs (DAPs) in wide-bandgap semiconductors has recently emerged as a means of realizing a quantum science platform through optically controllable, long-range interactions between defects in the solid state. In this work, we generalize DAPs to consider arbitrary dopant populations and demonstrate that the charge of the NV center in diamond is well suited for quantum science. Explicitly, we leverage experimental results [see Z. Yuan et al., PRR 2, 033263 (2020)] to show that shallow NV centers can be efficiently initialized to a given relative population of the negative and neutral charge states and that modulating the surface termination would allow for control of the timescale over which the initialization and subsequent computations would occur. Furthermore, we argue that the observation of electroluminescence from the neutral charge state of the NV center [see N. Mizuochi et al., Nat. Photon. 6, 299 (2012)], but not from the negative charge state, implies the ability to interface with the NV center’s charge in a manner analogous to the spin interface enabled by the spin-state dependent fluorescence of the NV center.
The negatively charged nitrogen-vacancy (NV) centre exhibits outstanding optical and spin properties and thus is very attractive for applications in quantum optics. Up to now an active control of the charge state of near-surface NV centres is difficult and the centres switch in an uncontrolled way between different charge states. In this work, we demonstrate an active control of the charge state of NV centres (implanted 7 nm below the surface) by using an in-plane Schottky diode geometry from aluminium on hydrogen terminated diamond in combination with confocal micro-photoluminescence measurements. The partial quenching of NV-photoluminescence caused by the hole accumulation layer of the hydrogen terminated surface can be recovered by applying reverse bias potentials on this diode, i.e. the NV(0) charge state is depleted while the NV(-) charge state is populated. This charge state conversion is caused by the bias voltage affected modulation of the band bending in the depletion region which shifts the Fermi level across the NV charge transition levels.
Silicon has turned from a niche laboratory-scale material into the backbone of modern electronics. Diamond functionalized with color centers could follow a similar path and grow from proof-of-concepts experiments to application-oriented quantum technologies. Quantum sensing, communication, and information processing with color centers has been proven to work in scientific experiments and enhanced sensitivities as well as novel functionalities have been reported. While the first generation of diamond quantum devices relied on color centers formed uncontrolled in natural diamond with a high statistical variation in composition and crystallinity, the situation has changed nowadays. With the emergence of high purity monocrystals and the option for isotopic purification of the carbon matrix, technological progress in materials science on the atomic-scale enabled tailoring the spin properties in diamond. But, since many color centers typically require vacancies to combine with impurities in the carbon lattice via diffusion, the generation of color centers underlies a statistical process providing only little control on the center's final position in the crystal lattice. The negatively charged nitrogen-vacancy (NV
−) center is the most studied optically active defect in diamond and exhibits remarkable spin properties and sensing capabilities, even on the nanoscale and at room temperature. The spin properties of NV
− centers close to the surface (1\,nm - 30\,nm) have been thoroughly studied and the deeper the spins are located in diamond the less decoherence from surface defects is observed. Creating NV
− centers at the surface by nitrogen ion implantation and burying them beneath a thin diamond layer via chemical vapor deposition (CVD) of diamond is reported to enhance the coherence times significantly. By separating the color center generation from controlling the resulting depth by an additional diamond layer, narrow depth profiles can be achieved by reducing the ion energy during implantation. Although the coherence properties improve, many of the implanted NV
− center are reported to vanish in the hydrogen-rich plasma of growth CVD chambers. The mechanism responsible for the instability of NV
− centers towards the plasma remains unclear, though. One hypothesis is the formation of nitrogen-vacancy-hydrogen centers from diffusing hydrogen and implanted NV
− centers but is has not been proven, yet. Here, we demonstrate the fabrication of depth confined NV
− centers by combining low energy (1\,keV - 5\,keV) ion implantation and CVD overgrowth. By increasing the thickness of the overgrown layer (6\,nm - 100\,nm) the influence of surface noise is shown to decrease leading to bulk-like coherence properties of up to $450\,\upmu$s (Hahn-echo) and
T2∗ dephasing times around $20\,\upmu$s. Monitoring the NV
− density as a function of the overgrowth time, we analyze the kinetics of the passivation in case of implanting ion doses of 10
11 15N
+/cm
2 and 10
12 15N
+/cm
2. The passivation turns out to occur faster for lower doses offering insights into sub-surface hydrogen diffusion in diamond. Analyzing the spin bath before and after overgrowth reveals a drastic reduction in paramagnetic spins after the CVD process but no NVH
− is found around the surviving NV
− centers. Checking the chemical composition in overgrown implantation sites with secondary-ion-mass-specrometry (SIMS), however, confirms significant amounts of hydrogen in the
15N-implanted layers. Since the concentration found for hydrogen exceeds the one for nitrogen by far, we suggest that diffusing hydrogen interacts also with vacancies forming probably mostly diamagnetic defects. In the last part of this dissertation, NV
− centers are generated with sub-nanometer precision below a thin
13C-enriched layer for quantum simulation. For fabricating the spin architecture starting from a
12C base layer, we overgrow implanted nitrogen with a
13C layer and bury the spins beneath a 30\,nm-thick
12C capping layer. By measuring the coupling strength between the electron and nuclear spins, we deduce a NV
− placement accuracy reaching below one nanometer with respect to the
13C-layer. Regarding the spin properties of the electron spins, no reduction in
T2 is observed despite of the proximity to the dense
13C-bath. As a consequence, the overgrowth of NV
− centers is demonstrated as a bottom-up approach to produce buried spin architectures with sharp isotopic transitions and efficient
13C-NV
− coupling. Together with the potential for bulk-like coherence properties the synergy of implantation and overgrowth is a powerful tool to fabricate reproducible quantum systems with tailored properties and high depth confinement.
Abstract Diamond is an established solid-state platform for quantum sensing, integrated photonics, and spin-based quantum technologies. Still, the performance of shallow color centers is strongly affected by surface-induced band bending, charge-state instability, interface traps, spectral diffusion, and near-surface defects. This review critically examines how hydrogen-, oxygen-, fluorine-, nitrogen-, and mixed-surface terminations, molecular functionalization, dielectric passivation, plasma and electrochemical treatments, defect-engineering routes, and emerging diamond-like carbon interfaces modify the local electronic and spin environment. Particular attention is given to the relationships among interface chemistry, defect depth, charge-state stability, spin coherence, optically detected magnetic resonance response, optical linewidth, spectral diffusion, and device-level reliability. Evidence from wide-field sensing, scanning-probe, nanophotonic, and hybrid architectures is compared while accounting for differences in processing and measurement conditions. Persistent limitations include inter-study variability, incomplete chemical–quantum correlation, inconsistent performance reporting, and limited long-term stability data. Standardized surface characterization, matched-condition performance measurements, and device-specific interface design are therefore required to improve reproducibility and support integrating surface-engineered diamond into quantum sensors, photonic components, and integrated quantum devices.