Low-dimensional materials have emerged as promising hosts for quantum emitters, whose emission typically arises from either strain-induced band bending or defect-induced two-level systems. Among these materials, transition metal dichalcogenide (TMD) monolayers have attracted particular attention; however, their performance is limited by strong photoluminescence (PL) quenching at room temperature. As TMDs transition from a direct to an indirect bandgap when moving from monolayers to multilayers, we herein propose a strategy to overcome this quenching limitation by exploiting the indirect bandgap of TMD bilayers in combination with a point defect doping. The indirect gap suppresses excitonic PL, while specific defects enable robust defect-mediated quantum emission. Using hybrid-functional density functional theory, we investigate substitutional carbon defects at chalcogen sites (S and Se) in WS2, WSe2, MoS2, and MoSe2 bilayers and comprehensively characterize their optical properties. Both neutral and singly negative charge states are found to be thermodynamically stable. Neutral defects exhibit singlet configurations with emission in the O- and C-band telecommunication windows, whereas negatively charged defects adopt doublet configurations featuring spin-selective transitions and near-infrared emission. The electron-phonon coupling strength, radiative lifetime, and dipole orientation are found to depend sensitively on both the host material and defect site, providing distinct fingerprints for experimental identification. Our findings, therefore, establish carbon-doped TMD bilayers as promising platforms for room-temperature defect-based quantum emitters operating at telecommunication wavelengths.
Low-dimensional materials have emerged as promising hosts for quantum emitters, whose emission typically arises from either strain-induced band bending or defect-induced two-level systems. Among these materials, transition metal dichalcogenide (TMD) monolayers have attracted particular attention; however, their performance is limited by strong photoluminescence (PL) quenching at room temperature. As TMDs transition from a direct to an indirect bandgap when moving from monolayers to multilayers, we herein propose a strategy to overcome this quenching limitation by exploiting the indirect bandgap of TMD bilayers in combination with a point defect doping. The indirect gap suppresses excitonic PL, while specific defects enable robust defect-mediated quantum emission. Using hybrid-functional density functional theory, we investigate substitutional carbon defects at chalcogen sites (S and Se) in WS2, WSe2, MoS2, and MoSe2 bilayers and comprehensively characterize their optical properties. Both neutral and singly negative charge states are found to be thermodynamically stable. Neutral defects exhibit singlet configurations with emission in the O- and C-band telecommunication windows, whereas negatively charged defects adopt doublet configurations featuring spin-selective transitions and near-infrared emission. The electron-phonon coupling strength, radiative lifetime, and dipole orientation are found to depend sensitively on both the host material and defect site, providing distinct fingerprints for experimental identification. Our findings, therefore, establish carbon-doped TMD bilayers as promising platforms for room-temperature defect-based quantum emitters operating at telecommunication wavelengths.
Theory of the CHS− Defect in MoS2 Confirming the Origin of the Quantum Emission
Establishing the microscopic origin of localized emission in two-dimensional materials through consistent agreement between experiment and theory remains challenging. Recent STM/STS-STML measurements assigned an emission near 1.8 eV in monolayer MoS2/hBN(2L)/graphene to the negatively charged CHS− defect. However, a comprehensive theoretical description of this emitter is still lacking. Here, we develop such a description and systematically investigate the photophysical properties of CHS− in monolayer MoS2, two bilayer configurations, and a MoS2/hBN heterostructure. The defect retains a similar local geometry and favors a singlet ground state in all four environments, whereas its electronic transition, zero-phonon line, electron-phonon coupling, radiative lifetime, and transition-dipole orientation depend strongly on the surrounding layers. The isolated-monolayer model exhibits substantial structural reorganization and produces a broad, dominant phonon sideband that is inconsistent with experiment. Adding an adjacent layer, either MoS2 or hBN, substantially suppresses the phonon sideband, with only a minor dependence on the defect position in bilayer MoS2. In particular, the MoS2/hBN model yields a weak phonon sideband and closely reproduces the experimental photoluminescence lineshape. Our results thus provide the first theoretical agreement of CHS− emission and further reveal the role of adjacent layers in determining the electronic, vibronic, and optical properties of the quantum emitters in two-dimensional materials.
Two-dimensional semiconductors have attracted considerable interest for integration into emerging quantum photonic networks. Strain engineering of monolayer transition-metal dichalcogenides (ML-TMDs) enables the tuning of light-matter interactions and associated optoelectronic properties, and generates new functionalities, including the formation of quantum dots (QDs). Here, we combine spatially resolved micro-photoluminescence (μ-PL) spectroscopy from cryogenic (4$\text{-}94K)toroomtemperaturewithmicro−Ramanspectroscopyatroomtemperaturetoinvestigatethestrain−dependentemissionenergiesofthousandsofindividualQDsinML−WS_2$ and ML-WSe2, integrated across multiple heterostructures and a piezoelectric device. Compared with delocalized excitons, QDs in both materials exhibit enhanced strain sensitivities of their emission energies − approximately fourfold in WS2 and twofold in WSe2− leading to pronounced broadening of the ensemble emission linewidth. Temperature-dependent μ-PL spectroscopy combined with dynamic strain tuning experiments further reveal that the enhanced strain sensitivity of individual QDs originates from strengthened interactions with low-energy phonons induced by quantum confinement. Our results demonstrate a versatile strain-engineering approach with potential for spectral matching across solid-state, atomic, and hybrid quantum photonic networks, and provide new insights into phonon-QD interactions in two-dimensional semiconductors.
Single photon emitters (SPEs) are integral parts of several quantum technology implementations. Over the past decade or so, monolayers of transition metal dichalcogenides (TMDCs) have emerged as one of the promising candidates for SPE platforms with attractive characteristics. To move ahead, it is necessary to understand the atomistic origin of SPEs in TMDCs - a topic which is highly debated with contradicting proposals. In this paper, we critically review these existing proposals to elucidate their origin. Further, we perform a critical trend analysis for different figures of merit of TMDC-based SPEs, and propose a characterization methodology to streamline the reporting process. Finally, we review several quantum technology implementations where solid state SPEs are being used, and identify the advancements required in TMDC-based SPEs for their successful adoption in these technologies.
Sources of single photons are integral to a number of applications in the emerging field of quantum technologies. For any practical implementation of single-photon sources, a variety of different properties and an overall comprehensive characterization of the sources are required. Color centers in hBN and group IV color centers in diamond are promising candidate sources due to their favorable properties and rich internal level structure. Both of these candidates, however, also present some serious challenges. Although bright and spectrally narrow, defects in hBN suffer from emission instabilities. Furthermore, limited knowledge about their atomic composition leads to behaviour, which is often unpredictable. Meanwhile, Group IV centers generally exhibit low extraction efficiencies due to total internal reflection inside the high-index diamond host material. In this thesis, several large-scale series of experiments are conducted to investigate both types of emitters in a confocal fluorescence microscope at room temperature. The excitation characteristics of a large number of single-photon emitters in hBN from a narrow spectral window are investigated using a fully automated procedure. The results are compared to theoretical predictions for several carbon defects from the literature to gain further knowledge of the atomic nature of the underlying defects. Based on this approach, the CB, CN, CBVN, and CNVB centers are confidently ruled out as possible origins of the observed emission. Some uncertainty remains about the assignment of the carbon trimer C2CN as well as carbon-based donor-acceptor pairs. In a separate series of experiments, emission instabilities of hBN emitters from the same spectral region are studied. The detected fluctuations in brightness were conclusively attributed to spectral diffusion of the emission. Furthermore, optical stabilization of these effects via short-wavelength irradiation favors an explanation of the observed behavior via nearby charge carriers and the resulting Stark effect. Tin-vacancies, as representatives of group IV centers, are studied in a novel type of diamond waveguide structure for light collection enhancement. A center with sharp zero-phonon emission around 619 nm, a g(2)(0) value of 0.32, and simultaneous stable count rate of 3.4 Mcps was found. By restricting the collection to the zero-phonon line, g(2)(0) = 0.1 could be achieved. In a widespread characterization of the sample, it was found that most structures contain more than one negatively charged SnV center, which leaves an opportunity to improve the implantation parameters. In additional experiments on single tin-vacancy centers, a possible transition to a higher excited state as well as the charge-state transitions of the defects were probed. The results of these measurements contribute to the growing body of research on tin-vacancies and other group IV centers.
Spin defects in two-dimensional materials hold significant potential for quantum information technologies and sensing applications. The negatively charged boron vacancy (VB-) in hexagonal boron nitride (hBN) has attracted considerable attention as a quantum sensor due to its demonstrated sensitivity to temperature, magnetic fields, and pressure.1 However, its applications have thus far been limited by inherently dim photoluminescence (PL). By fabricating a van der Waals heterostructure with a sensitizing donor layer, lead iodide (PbI2), we effectively enhance the PL intensity from the VB- by 5-45x, while maintaining compatibility with other heterostructures and vdW optoelectronic platforms. The type-I band alignment at the heterojunction enables efficient exciton migration while suppressing back-electron transfer, and the strong spectral overlap between the PbI2 emission and defect absorption supports efficient fluorescence resonance energy transfer. Ab initio density functional theory (DFT) predicts a photon-ratcheting mechanism that boosts absorption and emission while maintaining magnetic resonance (ODMR) contrast through minimal hybridization. Experimentally, the heterostructure exhibits enhanced continuous-wave ODMR sensitivity and functions as a precise probe of external magnetic fields. This work establishes a proof-of-concept for amplifying weak defect signals in nanomaterials, highlighting a new strategy for engineering their optical and magnetic responses.
Collective light emission from many-body quantum systems is a cornerstone of quantum optics, yet its implementation in solid-state platforms operating under ambient conditions remains highly challenging. Large-bandgap van der Waals materials such as hexagonal boron nitride (hBN) host stable room-temperature single-photon emitters with narrow linewidths across a broad spectral range. However, cooperative radiative effects in this system have not been previously explored. Here we demonstrate collective emission from quantum-emitter ensembles in hBN layers when the emitters are nearly indistinguishable and positioned within a sub-wavelength proximity. Using confocal microscopy and a Hanbury Brown-Twiss (HBT) configuration, we identify both isolated emitters and ensembles activated by localized electron-beam irradiation. Time-resolved photoluminescence measurements reveal a superlinear intensity enhancement and a pronounced acceleration of the radiative decay in tightly confined ensembles, with lifetimes approaching the temporal resolution of our experimental system (about 500 ps), compared to approximately 1.85 ns for single emitters or large, spatially extended ensembles. Complementary second-order photon-correlation measurements exhibit sub-Poissonian antidip consistent with emission from a few indistinguishable emitters. The simultaneous observation of lifetime shortening and enhanced emission provides direct evidence of cooperative emission at room temperature, achieved without optical cavities or cryogenic cooling. These results establish optically active defect ensembles in hBN as a scalable solid-state platform for engineered collective quantum optics in two-dimensional materials, opening avenues toward ultrabright superradiant light sources and nonclassical photonic states for quantum technologies.