Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.17784

Adaptive Real-Time Magnetic Field Tracking beyond Prior Waveform Constraints

Yihan Wang, Xiaofeng Jin, Yuchuan Ming, Jianxiang Miao, Xiao-Ming Lu, M. W. Mitchell, Jia Kong

quant-phSubmitted May 18, 2026• Announced May 19, 2026• 1 citation
arXivHTMLPDF

Abstract

The extraction of weak signals plays a crucial role in quantum precision measurement, where the estimation results are often limited by low signal-to-noise ratios. Here, we demonstrate a parameter-estimation framework based on the adaptive extended Kalman filter for dynamic magnetic-field estimation in quantum systems using spin-noise measurements -- a challenging regime characterized by weak signals. By modeling the magnetic field as an unknown parameter, the proposed approach alleviates model dependence in state estimation. Furthermore, by introducing an adaptive algorithm with real-time noise estimation, our method overcomes the measurement noise intensity constraints of conventional extended Kalman filtering and enhances its practical applicability. Numerical simulations covering three representative magnetic-field dynamics validate the capability of the proposed framework, while experimental results demonstrate successful tracking of a seismo-magnetic-like signal beyond the intrinsic sensitivity of conventional spin-noise spectroscopy.

Related papers

Noisy Atomic Magnetometry with Kalman Filtering and Measurement-Based Feedback

Júlia Amorós-Binefa, Jan Kołodyński

Sensing a magnetic field with an atomic magnetometer operated in real time presents significant challenges, primarily due to sensor nonlinearity, the presence of noise, and the need for one-shot estimation. To address these challenges, we propose a comprehensive approach that integrates measurement, estimation, and control strategies. Specifically, this involves implementing a quantum nondemolition measurement based on continuous light probing of the atomic ensemble. The resulting photocurrent is then directed into an extended Kalman filter to produce instantaneous estimates of the system’s dynamical parameters. These estimates, in turn, are utilized by a linear quadratic regulator, whose output is applied back to the system through a feedback loop. This procedure automatically steers the atomic ensemble into a spin-squeezed state, yielding a quantum enhancement in precision. Furthermore, thanks to the feedback proposed, the atoms exhibit entanglement even when the measurement data are discarded. To prove that our approach constitutes the optimal strategy in realistic scenarios, we derive ultimate bounds on the estimation error applicable in the presence of both local and collective decoherence, and show that these are indeed attained. Additionally, we demonstrate that, for large ensembles, the extended Kalman filter not only reliably predicts its own estimation error in real time, but also accurately estimates spin squeezing at short timescales.

arXiv:2403.14764•PRX Quantum•Jul 2, 2025•16 citations

State Estimation of a Quantum System Using Extended Kalman Filter

Nidhi Agarwal, Akanksha Sondhi, Ghanapriya Singh

In this paper we propose to estimate the state of a quantum system dynamically evolving in the presence of white Gaussian noise (WGN) under Schrödinger dynamics using Extended Kalman Filter (EKF) algorithm. In the proposed measurement model the EKF is applied to obtain the conditional expectation of the state at a given observation time up to that time. First the complex Schrödinger equation of dimension N is transformed into a real Schrödinger equation of dimension 2N. MATLAB programs were implemented to plot the wave function, error and noise to signal ratio (NSR). NSR within minimum bounds is obtained.

International Conference on Cutting-edge Technologies in Engineering (ICon-CuTE)•Nov 1, 2019•1 citation

Real-time optimal quantum control for atomic magnetometers with decoherence

Julia Amoros-Binefa

Quantum entanglement, in the form of spin squeezing, is known to improve the sensitivity of atomic sensors to static or slowly varying fields. Sensing transient events presents a distinct challenge, requires different analysis tools, and has not been shown to benefit from entanglement in practically important scenarios such as spin-precession magnetometry. To address this, we apply concepts from continuous quantum measurements and estimation theory to optical atomic magnetometers, aiming to accurately model these devices, interpret their measurement data, control their dynamics, and achieve optimal sensitivity. Quantifying this optimal performance requires determining a fundamental quantum limit on sensitivity. We derive this limit, imposed by noise, and show that it scales at best linearly with sensing time and atom number N, ruling out any super-classical scaling. This limit is independent of the initial state, measurement, estimator, and measurement-based feedback, and depends only on the decoherence model and the strength of field fluctuations. Thus, finding an estimator that attains this bound proves the sensing strategy optimal. To approach this limit, we develop a quantum dynamical model scalable with N, based on a co-moving Gaussian approximation of the stochastic master equation, which includes measurement backaction and decoherence. This enables a real-time estimation and control architecture integrating an extended Kalman filter with a linear quadratic regulator. Simulating the magnetometer with our model and EKF+LQR strategy shows that quantum-limited tracking of constant and fluctuating fields is within reach of current atomic magnetometers. Our sensing strategy can also track biologically relevant signals, such as heartbeat-like waveforms, and drive the atomic ensemble into an entangled state, even when the measurement record is used for feedback but later discarded.

quant-pharXiv:2512.05265•Dec 8, 2025•0 citations

Improving spin-based noise sensing by adaptive measurements

Yi-Hao Zhang, Wen Yang

Localized spins in the solid state are attracting widespread attention as highly sensitive quantum sensors with nanoscale spatial resolution and fascinating applications. Recently, adaptive measurements were used to improve the dynamic range for spin-based sensing of deterministic Hamiltonian parameters. Here we explore a very different direction—spin-based adaptive sensing of random noises. First, we identify distinguishing features for the sensing of magnetic noises compared with the estimation of deterministic magnetic fields, such as the different dependences on the spin decoherence, the different optimal measurement schemes, the absence of the modulo-2 π phase ambiguity, and the crucial role of adaptive measurement. Second, we perform numerical simulations that demonstrate significant speed up of the characterization of the spin decoherence time via adaptive measurements. This paves the way towards adaptive noise sensing and coherence protection.

arXiv:1807.09233•New Journal of Physics•Aug 29, 2018•12 citations

Noisy atomic magnetometry in real time

Júlia Amorós-Binefa, Jan Kołodyński

Abstract Continuously monitored atomic spin-ensembles allow, in principle, for real-time sensing of external magnetic fields beyond classical limits. Within the linear-Gaussian regime, thanks to the phenomenon of measurement-induced spin-squeezing, they attain a quantum-enhanced scaling of sensitivity both as a function of time, t, and the number of atoms involved, N. In our work, we rigorously study how such conclusions based on Kalman filtering methods change when inevitable imperfections are taken into account: in the form of collective noise, as well as stochastic fluctuations of the field in time. We prove that even an infinitesimal amount of noise disallows the error to be arbitrarily diminished by simply increasing N, and forces it to eventually follow a classical-like behaviour in t. However, we also demonstrate that, ‘thanks’ to the presence of noise, in most regimes the model based on a homodyne-like continuous measurement actually achieves the ultimate sensitivity allowed by the decoherence, yielding then the optimal quantum-enhancement. We are able to do so by constructing a noise-induced lower bound on the error that stems from a general method of classically simulating a noisy quantum evolution, during which the stochastic parameter to be estimated—here, the magnetic field—is encoded. The method naturally extends to schemes beyond the linear-Gaussian regime, in particular, also to ones involving feedback or active control.

arXiv:2103.12025•New Journal of Physics•Nov 19, 2021•40 citations

Suppression of Quantum Sensor Noise using Kalman Filter for Improved Sensitivity of Single‐Beam Atomic Magnetometers

Gaoyi Lei, Ziqi Yuan, Ziqian Yue +2 more

Abstract Single‐beam atomic magnetometers herald a new era of high‐precision magnetic field sensing, with applications spanning fundamental physics to biomagnetism. Nevertheless, their utility is often curtailed by quantum sensor noise, encompassing both technical and quantum‐mechanical noise. This research delves into the potential of the Kalman filter as a tool to subdue quantum sensor noise, thereby augmenting the sensitivity of single‐beam atomic magnetometers. Quantum‐mechanical noise is integrated into the system model as the process noise and measurement noise, and a discrete Kalman filter equipped with a time delay variable is employed. The findings reveal that the time delay variable significantly influences temporal signal tracing, while the discrete Kalman filter enhances sensitivity performance in frequency domain analysis, bypassing the typical sensitivity and time resolution trade‐off encountered in coherent sensing strategies. Partial‐knowledge signal scenarios are also taken into account, wherein a polynomial model is proposed to expansively render the discrete Kalman filter more relevant and adaptable to real‐world situations. Collectively, through experimentation involving sine‐like, non‐Gaussian, and medical magnetocardiography (MCG) signals, our results underscore the promising potential of the Kalman filter in enhancing the sensitivity of atomic magnetometers for practical sensing applications.

Advanced Quantum Technologies•Feb 11, 2024•10 citations
The extraction of weak signals plays a crucial role in quantum precision measurement, where the estimation results are often limited by low signal-to-noise ratios. Here, we demonstrate a parameter-estimation framework based on the adaptive extended Kalman filter for dynamic magnetic-field estimation in quantum systems using spin-noise measurements -- a challenging regime characterized by weak signals. By modeling the magnetic field as an unknown parameter, the proposed approach alleviates model dependence in state estimation. Furthermore, by introducing an adaptive algorithm with real-time noise estimation, our method overcomes the measurement noise intensity constraints of conventional extended Kalman filtering and enhances its practical applicability. Numerical simulations covering three representative magnetic-field dynamics validate the capability of the proposed framework, while experimental results demonstrate successful tracking of a seismo-magnetic-like signal beyond the intrinsic sensitivity of conventional spin-noise spectroscopy.
Sensing a magnetic field with an atomic magnetometer operated in real time presents significant challenges, primarily due to sensor nonlinearity, the presence of noise, and the need for one-shot estimation. To address these challenges, we propose a comprehensive approach that integrates measurement, estimation, and control strategies. Specifically, this involves implementing a quantum nondemolition measurement based on continuous light probing of the atomic ensemble. The resulting photocurrent is then directed into an extended Kalman filter to produce instantaneous estimates of the system’s dynamical parameters. These estimates, in turn, are utilized by a linear quadratic regulator, whose output is applied back to the system through a feedback loop. This procedure automatically steers the atomic ensemble into a spin-squeezed state, yielding a quantum enhancement in precision. Furthermore, thanks to the feedback proposed, the atoms exhibit entanglement even when the measurement data are discarded. To prove that our approach constitutes the optimal strategy in realistic scenarios, we derive ultimate bounds on the estimation error applicable in the presence of both local and collective decoherence, and show that these are indeed attained. Additionally, we demonstrate that, for large ensembles, the extended Kalman filter not only reliably predicts its own estimation error in real time, but also accurately estimates spin squeezing at short timescales.
In this paper we propose to estimate the state of a quantum system dynamically evolving in the presence of white Gaussian noise (WGN) under Schrödinger dynamics using Extended Kalman Filter (EKF) algorithm. In the proposed measurement model the EKF is applied to obtain the conditional expectation of the state at a given observation time up to that time. First the complex Schrödinger equation of dimension N is transformed into a real Schrödinger equation of dimension 2N. MATLAB programs were implemented to plot the wave function, error and noise to signal ratio (NSR). NSR within minimum bounds is obtained.
Quantum entanglement, in the form of spin squeezing, is known to improve the sensitivity of atomic sensors to static or slowly varying fields. Sensing transient events presents a distinct challenge, requires different analysis tools, and has not been shown to benefit from entanglement in practically important scenarios such as spin-precession magnetometry. To address this, we apply concepts from continuous quantum measurements and estimation theory to optical atomic magnetometers, aiming to accurately model these devices, interpret their measurement data, control their dynamics, and achieve optimal sensitivity. Quantifying this optimal performance requires determining a fundamental quantum limit on sensitivity. We derive this limit, imposed by noise, and show that it scales at best linearly with sensing time and atom number N, ruling out any super-classical scaling. This limit is independent of the initial state, measurement, estimator, and measurement-based feedback, and depends only on the decoherence model and the strength of field fluctuations. Thus, finding an estimator that attains this bound proves the sensing strategy optimal. To approach this limit, we develop a quantum dynamical model scalable with N, based on a co-moving Gaussian approximation of the stochastic master equation, which includes measurement backaction and decoherence. This enables a real-time estimation and control architecture integrating an extended Kalman filter with a linear quadratic regulator. Simulating the magnetometer with our model and EKF+LQR strategy shows that quantum-limited tracking of constant and fluctuating fields is within reach of current atomic magnetometers. Our sensing strategy can also track biologically relevant signals, such as heartbeat-like waveforms, and drive the atomic ensemble into an entangled state, even when the measurement record is used for feedback but later discarded.
Localized spins in the solid state are attracting widespread attention as highly sensitive quantum sensors with nanoscale spatial resolution and fascinating applications. Recently, adaptive measurements were used to improve the dynamic range for spin-based sensing of deterministic Hamiltonian parameters. Here we explore a very different direction—spin-based adaptive sensing of random noises. First, we identify distinguishing features for the sensing of magnetic noises compared with the estimation of deterministic magnetic fields, such as the different dependences on the spin decoherence, the different optimal measurement schemes, the absence of the modulo-2 π phase ambiguity, and the crucial role of adaptive measurement. Second, we perform numerical simulations that demonstrate significant speed up of the characterization of the spin decoherence time via adaptive measurements. This paves the way towards adaptive noise sensing and coherence protection.
Abstract Continuously monitored atomic spin-ensembles allow, in principle, for real-time sensing of external magnetic fields beyond classical limits. Within the linear-Gaussian regime, thanks to the phenomenon of measurement-induced spin-squeezing, they attain a quantum-enhanced scaling of sensitivity both as a function of time, t, and the number of atoms involved, N. In our work, we rigorously study how such conclusions based on Kalman filtering methods change when inevitable imperfections are taken into account: in the form of collective noise, as well as stochastic fluctuations of the field in time. We prove that even an infinitesimal amount of noise disallows the error to be arbitrarily diminished by simply increasing N, and forces it to eventually follow a classical-like behaviour in t. However, we also demonstrate that, ‘thanks’ to the presence of noise, in most regimes the model based on a homodyne-like continuous measurement actually achieves the ultimate sensitivity allowed by the decoherence, yielding then the optimal quantum-enhancement. We are able to do so by constructing a noise-induced lower bound on the error that stems from a general method of classically simulating a noisy quantum evolution, during which the stochastic parameter to be estimated—here, the magnetic field—is encoded. The method naturally extends to schemes beyond the linear-Gaussian regime, in particular, also to ones involving feedback or active control.
Abstract Single‐beam atomic magnetometers herald a new era of high‐precision magnetic field sensing, with applications spanning fundamental physics to biomagnetism. Nevertheless, their utility is often curtailed by quantum sensor noise, encompassing both technical and quantum‐mechanical noise. This research delves into the potential of the Kalman filter as a tool to subdue quantum sensor noise, thereby augmenting the sensitivity of single‐beam atomic magnetometers. Quantum‐mechanical noise is integrated into the system model as the process noise and measurement noise, and a discrete Kalman filter equipped with a time delay variable is employed. The findings reveal that the time delay variable significantly influences temporal signal tracing, while the discrete Kalman filter enhances sensitivity performance in frequency domain analysis, bypassing the typical sensitivity and time resolution trade‐off encountered in coherent sensing strategies. Partial‐knowledge signal scenarios are also taken into account, wherein a polynomial model is proposed to expansively render the discrete Kalman filter more relevant and adaptable to real‐world situations. Collectively, through experimentation involving sine‐like, non‐Gaussian, and medical magnetocardiography (MCG) signals, our results underscore the promising potential of the Kalman filter in enhancing the sensitivity of atomic magnetometers for practical sensing applications.