Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.15476 · ACM/IEEE Design Automation Conference (DAC)

Quantum Circuit Synthesis Using an Exact T Library

Hanyu Wang, Mingfei Yu, Xinrui Wu, Jason Cong

quant-phSubmitted May 14, 2026• Announced May 18, 2026• 0 citations
arXivHTMLPDF

Abstract

In fault-tolerant quantum circuit synthesis, T gates supplied via magic states dominate space-time cost, while Clifford gates incur negligible overhead. Conventional flows minimize AND count in an {XOR, AND, NOT} basis as a proxy for T, which neglects phase cancellation and can be far from T-optimal. We instead formulate an exact T synthesis problem and canonicalize Boolean functions under Clifford equivalence. By precomputing T-optimal implementations up to seven variables and developing a customized mapper, we reduce the T count by up to 14.3% on EPFL benchmarks and improve the T counts of several cryptographic modules by up to 40%.

Comments
8 pages, 12 figures, accepted by DAC 2026

Related papers

Quantum Circuit Pre-Synthesis: Learning Local Edits to Reduce $T$-count

Daniele Lizzio Bosco, Lukasz Cincio, Giuseppe Serra +1 more

Compiling quantum circuits into Clifford+$T$ gates is a central task for fault-tolerant quantum computing using stabilizer codes. In the near term, $T$ gates will dominate the cost of fault tolerant implementations, and any reduction in the number of such expensive gates could mean the difference between being able to run a circuit or not. While exact synthesis is exponentially hard in the number of qubits, local synthesis approaches are commonly used to compile large circuits by decomposing them into substructures. However, composing local methods leads to suboptimal compilations in key metrics such as $T$-count or circuit depth, and their performance strongly depends on circuit representation. In this work, we address this challenge by proposing \textsc{Q-PreSyn}, a strategy that, given a set of local edits preserving circuit equivalence, uses a RL agent to identify effective sequences of such actions and thereby obtain circuit representations that yield a reduced $T$-count upon synthesis. Experimental results of our proposed strategy, applied on top of well-known synthesis algorithms, show up to a $20\%$ reduction in $T$-count on circuits with up to 25 qubits, without introducing any additional approximation error prior to synthesis.

quant-pharXiv:2601.19738•Jan 28, 2026•6 citations

Reducing T Gates with Unitary Synthesis

Tianyi Hao, Amanda Xu, Swamit Tannu

Quantum error correction is essential for achieving practical quantum computing but has a significant computational overhead. Among fault-tolerant (FT) gate operations, non-Clifford gates, such as T, are particularly expensive due to their reliance on magic state distillation. These costly T gates appear frequently in FT circuits as many quantum algorithms require arbitrary single-qubit rotations, such as Rx and Rz gates, which must be decomposed into a sequence of T and Clifford gates. In many quantum circuits, Rx and Rz gates can be fused to form a single U3 unitary. However, existing synthesis methods, such as gridsynth, rely on indirect decompositions, requiring separate Rz decompositions that result in a threefold increase in T count.

arXiv:2503.15843•International Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS)•Mar 10, 2026•21 citations

High-Performance Exact Synthesis of Two-Qubit Quantum Circuits

Andrew N. Glaudell, Michael Jarret, Swan Klein +3 more

Exact synthesis provides unconditional optimality and canonical structure, but is often limited to small, carefully scoped regimes. We present an exact synthesis framework for two-qubit circuits over the Clifford+$T$ gate set that optimizes $T$-count exactly. Our approach exhausts a bounded search space, exploits algebraic canonicalization to avoid redundancy, and constructs a lookup table of optimal implementations that turns synthesis into a query. Algorithmically, we combine meet-in-the-middle ideas with provable pruning rules and problem-specific arithmetic designed for modern hardware. The result is an exact, reusable synthesis engine with substantially improved practical performance.

quant-pharXiv:2601.19166•Jan 28, 2026•0 citations

A polynomial time and space heuristic algorithm for T-count

Michele Mosca, Priyanka Mukhopadhyay

Abstract An important part of reaping computational advantage from a quantum computer is to reduce the quantum resources needed to implement a desired quantum algorithm. Quantum algorithms that are too large to be practical on noisy intermediate scale quantum devices will require fault-tolerant error correction. This work focuses on reducing the physical cost of implementing quantum algorithms when using the state-of-the-art fault-tolerant quantum error correcting codes, in particular, those for which implementing the T gate consumes vastly more resources than the other gates in the gate set. More specifically, in this paper we consider the group of unitaries that can be exactly implemented by a quantum circuit consisting of the Clifford + T gate set. The Clifford + T gate set is a universal gate set and in this group, using state-of-the-art surface codes, the T gate is by far the most expensive component to implement fault-tolerantly. So it is important to minimize the number of T gates necessary for a fault-tolerant implementation. Our primary interest is to compute a circuit for a given n -qubit unitary U , using the minimum possible number of T gates (called the T-count of unitary U ). We consider the problem COUNT-T, the optimization version of which aims to find the T-count of U . In its decision version the goal is to decide if the T-count is at most some positive integer m . Given an oracle for COUNT-T, we can compute a T-count-optimal circuit in time polynomial in the T-count and dimension of U . We give a provable classical algorithm that solves COUNT-T (decision) in time O N 2 ( c − 1 ) ⌈ m c ⌉ p o l y ( m , N ) and space O N 2 ⌈ m c ⌉ p o l y ( m , N ) , where N = 2 n and c ⩾ 2. This gives a space-time trade-off for solving this problem with variants of meet-in-the-middle techniques. We also introduce an asymptotically faster multiplication method that shaves a factor of N 0.7457 off of the overall complexity. Lastly, beyond our improvements to the rigorous algorithm, we give a heuristic algorithm that outputs a T-count-optimal circuit and has space and time complexity poly( m , N ), under some assumptions. In our heuristic algorithm we developed a novel way of pruning the search space. While our heuristic method still scales exponentially with the number of qubits (though with a lower exponent), there is a large improvement by going from exponential to polynomial scaling with m . We implemented our heuristic algorithm with up to 4 qubit unitaries and obtained a significant improvement in time. For all benchmark and random unitaries we studied, the T-count returned by our algorithm is at most the T-count of their circuits shown in previous papers.

arXiv:2006.12440•Quantum Science and Technology•Oct 7, 2021•34 citations

Enumerating Optimal Quantum Circuits using Spectral Classification

Giulia Meuli, Mathias Soeken, Martin Roetteler +1 more

This work targets fault-tolerant quantum computing and focuses on the problem of mapping reversible circuits into the Clifford+T quantum gate library. We present an automatically-generated database containing minimal-cost quantum circuits for Boolean functions up to 5 inputs. The database contains three circuits for each spectral-equivalent class representative, which are respectively optimized for the T-count, the T-depth, and the number of qubits. We show that any Boolean function can be derived from the implementation of its class representative without increasing any of the stated cost functions.

IEEE International Symposium on Circuits and Systems proceedings•Sep 29, 2020•9 citations

Linear-Time T-Gate Optimization via Random Abstraction

Aws Albarghouthi

Quantum computers promise exponential speedups for problems in cryptography, chemistry, and optimization. Realizing this promise requires fault tolerance: physical qubits are noisy, so logical qubits must be encoded redundantly across many physical ones using quantum error-correcting codes. In most practical fault-tolerance schemes, T gates cannot be implemented transversally and instead require costly magic-state distillation protocols involving a complex set of operations. As a result, T-gate count can dominate the resource budget of large-scale quantum computations, making T-count minimization a central bottleneck on the path to quantum advantage. Existing T-count optimization tools, however, do not scale to the circuits that quantum advantage demands. We present theoretical and practical results on T-gate optimization. On the theoretical side, we give a linear-time randomized algorithm for phase folding, based on a novel randomized static analysis. Our static analysis soundly approximates the set of reachable quantum states with an arbitrarily high probability. Our key insight is a static analysis that does not track symbolic expressions, but propagates constant-width bitstrings down the circuit. On the practical side, our implementation, TZAP, is multiple orders of magnitude faster than state-of-the-art tools -- such as PyZX, VOQC, and Feynman -- closely matches their T-count reductions on standard benchmarks, and within seconds on a laptop computer can optimize circuits with millions of gates.

cs.PLCross-listedarXiv:2605.13929•May 14, 2026•5 citations
In fault-tolerant quantum circuit synthesis, T gates supplied via magic states dominate space-time cost, while Clifford gates incur negligible overhead. Conventional flows minimize AND count in an {XOR, AND, NOT} basis as a proxy for T, which neglects phase cancellation and can be far from T-optimal. We instead formulate an exact T synthesis problem and canonicalize Boolean functions under Clifford equivalence. By precomputing T-optimal implementations up to seven variables and developing a customized mapper, we reduce the T count by up to 14.3% on EPFL benchmarks and improve the T counts of several cryptographic modules by up to 40%.
Quantum Circuit Pre-Synthesis: Learning Local Edits to Reduce TTT-count
Compiling quantum circuits into Clifford+TTT gates is a central task for fault-tolerant quantum computing using stabilizer codes. In the near term, TTT gates will dominate the cost of fault tolerant implementations, and any reduction in the number of such expensive gates could mean the difference between being able to run a circuit or not. While exact synthesis is exponentially hard in the number of qubits, local synthesis approaches are commonly used to compile large circuits by decomposing them into substructures. However, composing local methods leads to suboptimal compilations in key metrics such as TTT-count or circuit depth, and their performance strongly depends on circuit representation. In this work, we address this challenge by proposing \textsc{Q-PreSyn}, a strategy that, given a set of local edits preserving circuit equivalence, uses a RL agent to identify effective sequences of such actions and thereby obtain circuit representations that yield a reduced TTT-count upon synthesis. Experimental results of our proposed strategy, applied on top of well-known synthesis algorithms, show up to a 20%20\%20% reduction in TTT-count on circuits with up to 25 qubits, without introducing any additional approximation error prior to synthesis.
Quantum error correction is essential for achieving practical quantum computing but has a significant computational overhead. Among fault-tolerant (FT) gate operations, non-Clifford gates, such as T, are particularly expensive due to their reliance on magic state distillation. These costly T gates appear frequently in FT circuits as many quantum algorithms require arbitrary single-qubit rotations, such as Rx and Rz gates, which must be decomposed into a sequence of T and Clifford gates. In many quantum circuits, Rx and Rz gates can be fused to form a single U3 unitary. However, existing synthesis methods, such as gridsynth, rely on indirect decompositions, requiring separate Rz decompositions that result in a threefold increase in T count.
Exact synthesis provides unconditional optimality and canonical structure, but is often limited to small, carefully scoped regimes. We present an exact synthesis framework for two-qubit circuits over the Clifford+TTT gate set that optimizes TTT-count exactly. Our approach exhausts a bounded search space, exploits algebraic canonicalization to avoid redundancy, and constructs a lookup table of optimal implementations that turns synthesis into a query. Algorithmically, we combine meet-in-the-middle ideas with provable pruning rules and problem-specific arithmetic designed for modern hardware. The result is an exact, reusable synthesis engine with substantially improved practical performance.
Abstract An important part of reaping computational advantage from a quantum computer is to reduce the quantum resources needed to implement a desired quantum algorithm. Quantum algorithms that are too large to be practical on noisy intermediate scale quantum devices will require fault-tolerant error correction. This work focuses on reducing the physical cost of implementing quantum algorithms when using the state-of-the-art fault-tolerant quantum error correcting codes, in particular, those for which implementing the T gate consumes vastly more resources than the other gates in the gate set. More specifically, in this paper we consider the group of unitaries that can be exactly implemented by a quantum circuit consisting of the Clifford + T gate set. The Clifford + T gate set is a universal gate set and in this group, using state-of-the-art surface codes, the T gate is by far the most expensive component to implement fault-tolerantly. So it is important to minimize the number of T gates necessary for a fault-tolerant implementation. Our primary interest is to compute a circuit for a given n -qubit unitary U , using the minimum possible number of T gates (called the T-count of unitary U ). We consider the problem COUNT-T, the optimization version of which aims to find the T-count of U . In its decision version the goal is to decide if the T-count is at most some positive integer m . Given an oracle for COUNT-T, we can compute a T-count-optimal circuit in time polynomial in the T-count and dimension of U . We give a provable classical algorithm that solves COUNT-T (decision) in time O N 2 ( c − 1 ) ⌈ m c ⌉ p o l y ( m , N ) and space O N 2 ⌈ m c ⌉ p o l y ( m , N ) , where N = 2 n and c ⩾ 2. This gives a space-time trade-off for solving this problem with variants of meet-in-the-middle techniques. We also introduce an asymptotically faster multiplication method that shaves a factor of N 0.7457 off of the overall complexity. Lastly, beyond our improvements to the rigorous algorithm, we give a heuristic algorithm that outputs a T-count-optimal circuit and has space and time complexity poly( m , N ), under some assumptions. In our heuristic algorithm we developed a novel way of pruning the search space. While our heuristic method still scales exponentially with the number of qubits (though with a lower exponent), there is a large improvement by going from exponential to polynomial scaling with m . We implemented our heuristic algorithm with up to 4 qubit unitaries and obtained a significant improvement in time. For all benchmark and random unitaries we studied, the T-count returned by our algorithm is at most the T-count of their circuits shown in previous papers.
This work targets fault-tolerant quantum computing and focuses on the problem of mapping reversible circuits into the Clifford+T quantum gate library. We present an automatically-generated database containing minimal-cost quantum circuits for Boolean functions up to 5 inputs. The database contains three circuits for each spectral-equivalent class representative, which are respectively optimized for the T-count, the T-depth, and the number of qubits. We show that any Boolean function can be derived from the implementation of its class representative without increasing any of the stated cost functions.
Quantum computers promise exponential speedups for problems in cryptography, chemistry, and optimization. Realizing this promise requires fault tolerance: physical qubits are noisy, so logical qubits must be encoded redundantly across many physical ones using quantum error-correcting codes. In most practical fault-tolerance schemes, T gates cannot be implemented transversally and instead require costly magic-state distillation protocols involving a complex set of operations. As a result, T-gate count can dominate the resource budget of large-scale quantum computations, making T-count minimization a central bottleneck on the path to quantum advantage. Existing T-count optimization tools, however, do not scale to the circuits that quantum advantage demands. We present theoretical and practical results on T-gate optimization. On the theoretical side, we give a linear-time randomized algorithm for phase folding, based on a novel randomized static analysis. Our static analysis soundly approximates the set of reachable quantum states with an arbitrarily high probability. Our key insight is a static analysis that does not track symbolic expressions, but propagates constant-width bitstrings down the circuit. On the practical side, our implementation, TZAP, is multiple orders of magnitude faster than state-of-the-art tools -- such as PyZX, VOQC, and Feynman -- closely matches their T-count reductions on standard benchmarks, and within seconds on a laptop computer can optimize circuits with millions of gates.