Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.12046

Rethink the Role of Neural Decoders in Quantum Error Correction

Ge Yan, Shanchuan Li, Yuxuan Du

quant-phcs.AIcs.LGSubmitted May 12, 2026• Announced May 13, 2026• 8 citations
arXivHTMLPDF

Abstract

Quantum error correction (QEC) is essential for enabling quantum advantages, with decoding as a central algorithmic primitive. Owing to its importance and intrinsic difficulty, substantial effort has been made to QEC decoder design, among which neural decoders have recently emerged as a promising data-driven paradigm. Despite this progress, practical deployment remains hindered by a fundamental accuracy-latency tradeoff, often on the microsecond timescale. To address this challenge, here we revisit neural decoders for surface-code decoding under explicit accuracy-latency constraints, considering code distances up to d=9 (161 physical qubits). We unify and redesign representative neural decoders into five architectural paradigms and develop an end-to-end compression pipeline to evaluate their deployability and performance on FPGA hardware. Through systematic experiments, we reveal several previously underexplored insights: (i) near-term decoding performance is driven more by data scale than architectural complexity; (ii) appropriate inductive bias is essential for achieving high decoding accuracy; and (iii) INT4 quantization is a prerequisite for meeting microsecond-scale latency requirements on FPGAs. Together, these findings provide concrete guidance toward scalable and real-time neural QEC decoding.

Comments
Accepted to ICML 2026; 33 Pages, 9 figures

Related papers

A Scalable, Fast and Programmable Neural Decoder for Fault-Tolerant Quantum Computation Using Surface Codes

Zhang, Mengyu, Xiangyu Ren, Guanglei Xi +6 more

Quantum error-correcting codes (QECCs) can eliminate the negative effects of quantum noise, the major obstacle to the execution of quantum algorithms. However, realizing practical quantum error correction (QEC) requires resolving many challenges to implement a high-performance real-time decoding system. Many decoding algorithms have been proposed and optimized in the past few decades, of which neural network (NNs) based solutions have drawn an increasing amount of attention due to their high efficiency. Unfortunately, previous works on neural decoders are still at an early stage and have only relatively simple architectures, which makes them unsuitable for practical QEC. In this work, we propose a scalable, fast, and programmable neural decoding system to meet the requirements of FTQEC for rotated surface codes (RSC). Firstly, we propose a hardware-efficient NN decoding algorithm with relatively low complexity and high accuracy. Secondly, we develop a customized hardware decoder with architectural optimizations to reduce latency. Thirdly, our proposed programmable architecture boosts the scalability and flexibility of the decoder by maximizing parallelism. Fourthly, we build an FPGA-based decoding system with integrated control hardware for evaluation. Our $L=5$ ($L$ is the code distance) decoder achieves an extremely low decoding latency of 197 ns, and the $L=7$ configuration also requires only 1.136 $μ$s, both taking $2L$ rounds of syndrome measurements. The accuracy results of our system are close to minimum weight perfect matching (MWPM). Furthermore, our programmable architecture reduces hardware resource consumption by up to $3.0\times$ with only a small latency loss. We validated our approach in real-world scenarios by conducting a proof-of-concept benchmark with practical noise models, including one derived from experimental data gathered from physical hardware.

arXiv:2305.15767•May 25, 2023•20 citations

Real-time Surface-Code Error Correction Using an FPGA-based Neural-Network Decoder

Xiaohan Yang, Xuandong Sun, Zhiyi Wu +9 more

Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.

quant-pharXiv:2605.04892•May 7, 2026•8 citations

Machine Learning Approaches to Decoding Topological Quantum Codes

Changwon Lee, Tak Hur, Jeongwoo Jae +1 more

Decoding is an essential component of quantum error correction (QEC), translating stabilizer measurement outcomes into corrective actions that suppress logical errors and preserve logical quantum information. Building fault-tolerant architectures requires increasing the code distance, which in turn places growing demands on decoding accuracy, scalability, and practical deployability. While a wide range of decoding algorithms have been proposed and demonstrated, achieving reliable, scalable, and real-time decoding remains a significant challenge. Machine-learning (ML) approaches are particularly well suited to this setting, as quantum error decoding is fundamentally a problem of processing large volumes of classical data with complex spatiotemporal correlations. This chapter surveys ML-based methods for quantum error decoding, with a focus on topological codes and an emphasis on architectural principles, practical performance, and real-time considerations. We first frame decoding as a learning problem and outline key paradigms, including discriminative, generative, and reinforcement-learning formulations. We then introduce the neural network building blocks that underpin most contemporary neural decoders and discuss how these components can be integrated to balance expressivity, scalability, and latency. Building on this architectural perspective, we review recent progress and benchmarks in neural decoding for memory experiments, and discuss real-time decoding, open challenges, and future directions toward scalable fault-tolerant quantum computing.

quant-pharXiv:2608.15760•Aug 18, 2026•2 citations

Neural Decoders Reduce Logical Error Rates in Surface Code Quantum Systems

Lukas Schneider, Haruki Tanaka

Fault-tolerant quantum computation critically depends on the ability to detect and correct physical qubit errors faster than they accumulate. The surface code (SC) has emerged as the most experimentally promising quantum error correction (QEC) framework due to its high threshold and local stabilizer structure, yet its practical performance is bottlenecked by decoder efficiency. Traditional decoding approaches such as minimum-weight perfect matching (MWPM) achieve near-optimal accuracy under independent noise but struggle with correlated errors, circuit-level noise, and real-time latency constraints. This paper investigates how neural network (NN)-based decoders reduce logical error rates in SC quantum systems by learning complex syndrome-to-correction mappings from data. We propose a hybrid convolutional-recurrent neural architecture that processes stabilizer measurement syndromes across both spatial and temporal dimensions, enabling the decoder to capture correlated error patterns inherent in realistic hardware. Systematic simulations under depolarizing, biased, and circuit-level noise models demonstrate that the proposed neural decoder achieves a logical error rate reduction of up to 41.3% compared to MWPM at a physical error rate of p = 0.008, while maintaining sub-millisecond decoding latency compatible with superconducting qubit cycle times. These results establish that data-driven neural decoders represent a scalable and hardware-compatible pathway toward achieving the logical error rates required for practical fault-tolerant quantum computing.

Frontiers in Applied Physics and Mathematics•Mar 25, 2026•0 citations

A Scalable Open-Source QEC System with Sub-Microsecond Decoding-Feedback Latency

Junyi Liu, Yi Lee, Yilun Xu +2 more

Quantum error correction (QEC) is essential for realizing large-scale, fault-tolerant quantum computation, yet its practical implementation remains a major engineering challenge. In particular, QEC demands precise real-time control of a large number of qubits and low-latency, high-throughput and accurate decoding of error syndromes. While most prior work has focused primarily on decoder design, the overall performance of any QEC system depends critically on all its subsystems including control, communication, and decoding, as well as their integration. To address this challenge, we present an open-source, fully integrated QEC system built on RISC-Q, a generator for RISC-V-based quantum control architectures. Implemented on RFSoC FPGAs, our system prototype integrates real-time qubit control, a scalable distributed multi-board architecture, and the state-of-the-art hardware QEC decoder within a low-latency, high-throughput decoding pipeline, forming a complete hardware platform ready for deployment with superconducting qubits. Experimental evaluation on a three-board prototype based on AMD ZCU216 RFSoCs demonstrates an end-to-end QEC decoding-feedback latency of 446 ns for a distance-3 surface code, including syndrome aggregation, network communication, syndrome decoding, and error distribution. Extrapolating from measured subsystem performance and state-of-the-art decoder benchmarks, the architecture can achieve sub-microsecond decoding-feedback latency up to a distance-21 surface code ($\sim$881 physical qubits) when scaled to larger hardware configurations.

quant-pharXiv:2603.16203•Mar 18, 2026•7 citations

Neural-Network Decoders for Quantum Error Correction Using Surface Codes: A Space Exploration of the Hardware Cost-Performance Tradeoffs

Ramon W. J. Overwater, Masoud Babaie, Fabio Sebastiano

Quantum Error Correction (QEC) is required in quantum computers to mitigate the effect of errors on physical qubits. When adopting a QEC scheme based on surface codes, error decoding is the most computationally expensive task in the classical electronic back-end. Decoders employing neural networks (NN) are well-suited for this task but their hardware implementation has not been presented yet. This work presents a space exploration of fully-connected feed-forward NN decoders for small distance surface codes. The goal is to optimize the neural network for high decoding performance, while keeping a minimalistic hardware implementation. This is needed to meet the tight delay constraints of real-time surface code decoding. We demonstrate that hardware based NN-decoders can achieve high decoding performance comparable to other state-of-the-art decoding algorithms whilst being well below the tight delay requirements (440 ns) of current solid-state qubit technologies for both ASIC designs (<30 ns) and FPGA implementations (<90 ns). These results indicate that NN-decoders are viable candidates for further exploration of an integrated hardware implementation in future large-scale quantum computers.

arXiv:2202.05741•IEEE Transactions on Quantum Engineering•Jan 1, 2022•87 citations
Quantum error correction (QEC) is essential for enabling quantum advantages, with decoding as a central algorithmic primitive. Owing to its importance and intrinsic difficulty, substantial effort has been made to QEC decoder design, among which neural decoders have recently emerged as a promising data-driven paradigm. Despite this progress, practical deployment remains hindered by a fundamental accuracy-latency tradeoff, often on the microsecond timescale. To address this challenge, here we revisit neural decoders for surface-code decoding under explicit accuracy-latency constraints, considering code distances up to d=9 (161 physical qubits). We unify and redesign representative neural decoders into five architectural paradigms and develop an end-to-end compression pipeline to evaluate their deployability and performance on FPGA hardware. Through systematic experiments, we reveal several previously underexplored insights: (i) near-term decoding performance is driven more by data scale than architectural complexity; (ii) appropriate inductive bias is essential for achieving high decoding accuracy; and (iii) INT4 quantization is a prerequisite for meeting microsecond-scale latency requirements on FPGAs. Together, these findings provide concrete guidance toward scalable and real-time neural QEC decoding.
Quantum error-correcting codes (QECCs) can eliminate the negative effects of quantum noise, the major obstacle to the execution of quantum algorithms. However, realizing practical quantum error correction (QEC) requires resolving many challenges to implement a high-performance real-time decoding system. Many decoding algorithms have been proposed and optimized in the past few decades, of which neural network (NNs) based solutions have drawn an increasing amount of attention due to their high efficiency. Unfortunately, previous works on neural decoders are still at an early stage and have only relatively simple architectures, which makes them unsuitable for practical QEC. In this work, we propose a scalable, fast, and programmable neural decoding system to meet the requirements of FTQEC for rotated surface codes (RSC). Firstly, we propose a hardware-efficient NN decoding algorithm with relatively low complexity and high accuracy. Secondly, we develop a customized hardware decoder with architectural optimizations to reduce latency. Thirdly, our proposed programmable architecture boosts the scalability and flexibility of the decoder by maximizing parallelism. Fourthly, we build an FPGA-based decoding system with integrated control hardware for evaluation. Our L=5L=5L=5 (LLL is the code distance) decoder achieves an extremely low decoding latency of 197 ns, and the L=7L=7L=7 configuration also requires only 1.136 μμμs, both taking 2L2L2L rounds of syndrome measurements. The accuracy results of our system are close to minimum weight perfect matching (MWPM). Furthermore, our programmable architecture reduces hardware resource consumption by up to 3.0×3.0\times3.0× with only a small latency loss. We validated our approach in real-world scenarios by conducting a proof-of-concept benchmark with practical noise models, including one derived from experimental data gathered from physical hardware.
Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.
Decoding is an essential component of quantum error correction (QEC), translating stabilizer measurement outcomes into corrective actions that suppress logical errors and preserve logical quantum information. Building fault-tolerant architectures requires increasing the code distance, which in turn places growing demands on decoding accuracy, scalability, and practical deployability. While a wide range of decoding algorithms have been proposed and demonstrated, achieving reliable, scalable, and real-time decoding remains a significant challenge. Machine-learning (ML) approaches are particularly well suited to this setting, as quantum error decoding is fundamentally a problem of processing large volumes of classical data with complex spatiotemporal correlations. This chapter surveys ML-based methods for quantum error decoding, with a focus on topological codes and an emphasis on architectural principles, practical performance, and real-time considerations. We first frame decoding as a learning problem and outline key paradigms, including discriminative, generative, and reinforcement-learning formulations. We then introduce the neural network building blocks that underpin most contemporary neural decoders and discuss how these components can be integrated to balance expressivity, scalability, and latency. Building on this architectural perspective, we review recent progress and benchmarks in neural decoding for memory experiments, and discuss real-time decoding, open challenges, and future directions toward scalable fault-tolerant quantum computing.
Fault-tolerant quantum computation critically depends on the ability to detect and correct physical qubit errors faster than they accumulate. The surface code (SC) has emerged as the most experimentally promising quantum error correction (QEC) framework due to its high threshold and local stabilizer structure, yet its practical performance is bottlenecked by decoder efficiency. Traditional decoding approaches such as minimum-weight perfect matching (MWPM) achieve near-optimal accuracy under independent noise but struggle with correlated errors, circuit-level noise, and real-time latency constraints. This paper investigates how neural network (NN)-based decoders reduce logical error rates in SC quantum systems by learning complex syndrome-to-correction mappings from data. We propose a hybrid convolutional-recurrent neural architecture that processes stabilizer measurement syndromes across both spatial and temporal dimensions, enabling the decoder to capture correlated error patterns inherent in realistic hardware. Systematic simulations under depolarizing, biased, and circuit-level noise models demonstrate that the proposed neural decoder achieves a logical error rate reduction of up to 41.3% compared to MWPM at a physical error rate of p = 0.008, while maintaining sub-millisecond decoding latency compatible with superconducting qubit cycle times. These results establish that data-driven neural decoders represent a scalable and hardware-compatible pathway toward achieving the logical error rates required for practical fault-tolerant quantum computing.
Quantum error correction (QEC) is essential for realizing large-scale, fault-tolerant quantum computation, yet its practical implementation remains a major engineering challenge. In particular, QEC demands precise real-time control of a large number of qubits and low-latency, high-throughput and accurate decoding of error syndromes. While most prior work has focused primarily on decoder design, the overall performance of any QEC system depends critically on all its subsystems including control, communication, and decoding, as well as their integration. To address this challenge, we present an open-source, fully integrated QEC system built on RISC-Q, a generator for RISC-V-based quantum control architectures. Implemented on RFSoC FPGAs, our system prototype integrates real-time qubit control, a scalable distributed multi-board architecture, and the state-of-the-art hardware QEC decoder within a low-latency, high-throughput decoding pipeline, forming a complete hardware platform ready for deployment with superconducting qubits. Experimental evaluation on a three-board prototype based on AMD ZCU216 RFSoCs demonstrates an end-to-end QEC decoding-feedback latency of 446 ns for a distance-3 surface code, including syndrome aggregation, network communication, syndrome decoding, and error distribution. Extrapolating from measured subsystem performance and state-of-the-art decoder benchmarks, the architecture can achieve sub-microsecond decoding-feedback latency up to a distance-21 surface code ($\sim$881 physical qubits) when scaled to larger hardware configurations.
Quantum Error Correction (QEC) is required in quantum computers to mitigate the effect of errors on physical qubits. When adopting a QEC scheme based on surface codes, error decoding is the most computationally expensive task in the classical electronic back-end. Decoders employing neural networks (NN) are well-suited for this task but their hardware implementation has not been presented yet. This work presents a space exploration of fully-connected feed-forward NN decoders for small distance surface codes. The goal is to optimize the neural network for high decoding performance, while keeping a minimalistic hardware implementation. This is needed to meet the tight delay constraints of real-time surface code decoding. We demonstrate that hardware based NN-decoders can achieve high decoding performance comparable to other state-of-the-art decoding algorithms whilst being well below the tight delay requirements (440 ns) of current solid-state qubit technologies for both ASIC designs (<30 ns) and FPGA implementations (<90 ns). These results indicate that NN-decoders are viable candidates for further exploration of an integrated hardware implementation in future large-scale quantum computers.