Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.08502 · Review of Scientific Instruments

Design and fabrication of a micro-ion trap with a 3D-printed loading zone for improved hot-ion capture

Sayan Patra, Abhinav Parakh, Xiaoxing Xia, Juergen Biener, Hartmut Häffner, Kristin M. Beck

physics.atom-phquant-phSubmitted May 8, 2026• Announced May 12, 2026• 0 citations
arXivHTMLPDF

Abstract

We leverage recent advances in 3D-printing technology to design and fabricate a micro-ion trap with a spatially distinct loading zone for more efficient loading of ions from effusive thermal ovens. The design reduces the Mathieu-$q$ parameter in the loading zone by increasing the ion-electrode separation $r_0$, thereby potentially facilitating more effective laser cooling of hot ions. This circumvents the temporary thermal instability that arises when the rf potential is reduced during ion loading, a common practice to enable efficient laser cooling of hot ions. Simulations predict that expanding $r_0$ maintains a high trapped ion fraction from a simulated thermal source across a wide range of Mathieu-$q$ parameters. We demonstrate the manufacturability of this design by 3D-printing the rf rails of a four-rod ion trap and discuss the limitations imposed by state-of-the-art additive manufacturing techniques. We briefly compare hot-ion capture in the three-dimensional design presented here with that in a representative planar trap, illustrating one instance in which the former may be better for loading. The article concludes with an outlook for how this design may be incorporated into a quantum-CCD architecture to enhance ion loading and reduce associated experimental overheads.

Related papers

Feasibility Study of 3D-Printed Micro Junction Array for Ion Trap Quantum Processor

Kento Taniguchi, Ke Sun, Shuqi Xu +6 more

We introduce an ion trap platform based on a 3D-printed micro-junction array, designed to implement quantum charge-coupled device (QCCD) architectures for large-scale quantum information processing (QIP). The integration of three-dimensionally structured micro Radio-Frequency (RF) electrodes above a surface-electrode trap enables flexible control of electric field profiles across both linear and junction regions. Through simulations, we demonstrate that the linear region exhibits deeper and more harmonic ion confinement with reduced RF drive power compared to conventional planar traps. Crucially, we identify a junction geometry that maintains uniform ion confinement during transport while substantially reducing the pseudopotential barrier. This reduction facilitates low-heating, high-fidelity transport of single- and multi-species ion crystals. Our results establish a viable route toward fault-tolerant quantum computing by enabling modular and scalable QCCD systems based on the state-of-the-art 3D-printing technologies.

arXiv:2509.17275•Sep 21, 2025•3 citations

Geometries and fabrication methods for 3D printing ion traps

A. Quinn, Melanie Brown, Timothy J. Gardner +1 more

The majority of microfabricated ion traps in use for quantum information processing are of the 2D 'surface-electrode' type or of the 3D 'wafer' type. Surface-electrode traps greatly simplify fabrication and hold the promise of allowing trapped-ion quantum computers to scale via standard semiconductor industry fabrication techniques. However, their geometry constrains them to having much lower trapping efficiency, depth, and harmonicity compared to 3D geometries. Conversely 3D geometries offer superior trap performance but fabrication is more complex, limiting potential to scale. We describe new 'trench' geometries that exist in the design space between these two paradigms. They still allow for a simple, planar electrode layer but with much more favourable trapping properties. We propose such traps could be 3D-printed over a 2D wafer with microfabricated components already integrated into it, thus retaining all the integration techniques and scaling advantages of surface-electrode traps. As a proof of principle we use 2-photon direct laser writing lithography to print the required electrode structures with the proposed geometry.

arXiv:2205.15892•May 31, 2022•3 citations

3D-printed components for electron-ion trapping: pre-experimental tests of functionality and ultra-high vacuum compatibility

Vineet Kumar, Niklas Vilhelm Lausti, Jiří Hajnyš +4 more

Abstract We demonstrate the ultra-high vacuum compatibility of a microwave-driven electron trap and an atomic oven (for atomic beam generation) fabricated through 3D printing via Laser Powder Bed Fusion (L-PBF). The trap integrates into a coaxial microwave cavity, enabling stable, narrow-band, high-amplitude oscillations of the electric field at the electrodes. The design also supports simultaneous trapping of ions. The oven performs well in ultra-high vacuum (UHV) environments without significant outgassing. In addition to achieving the UHV regime for 3D-printed components, pressure variations and their potential impact on electron-ion trapping experiments were investigated over a month. Our results show that experiments with electrons photodetached from trapped and laser-cooled ions are feasible with the trap and oven manufactured by the L-PBF method. These findings establish a foundation for future experiments in microwave detection and the study of low-energy ion-electron interactions at room temperature.

arXiv:2509.06537•Physica Scripta•Nov 26, 2025•4 citations

Experimental investigation of planar ion traps

C. E. Pearson, David R. Leibrandt, Waseem Bakr +3 more

Chiaverini et al. [Quantum Inf. Comput. 5, 419 (2005)] recently suggested a linear Paul trap geometry for ion-trap quantum computation that places all of the electrodes in a plane. Such planar ion traps are compatible with modern semiconductor fabrication techniques and can be scaled to make compact, many-zone traps. In this paper we present an experimental realization of planar ion traps using electrodes on a printed circuit board to trap linear chains of tens of charged particles of $0.44\phantom{\rule{0.3em}{0ex}}\mathrm{\ensuremath{\mu}}\mathrm{m}$ diameter in a vacuum of $15\phantom{\rule{0.3em}{0ex}}\mathrm{Pa}\phantom{\rule{0.3em}{0ex}}({10}^{\ensuremath{-}1}\phantom{\rule{0.3em}{0ex}}\mathrm{torr})$. With these traps we address concerns about the low trap depth of planar ion traps and develop control electrode layouts for moving ions between trap zones without facing some of the technical difficulties involved in an atomic ion-trap experiment. Specifically, we use a trap with 36 zones (77 electrodes) arranged in a cross to demonstrate loading from a traditional four-rod linear Paul trap, linear ion movement, splitting and joining of ion chains, and movement of ions through intersections. We further propose an additional dc-biased electrode above the trap which increases the trap depth dramatically, and a planar ion-trap geometry that generates a two-dimensional lattice of point Paul traps.

arXiv:quant-ph/0511018•Physical Review A•Mar 3, 2006•119 citations

A monolithic segmented 3D ion trap fabricated from fused silica by selective laser-induced etching

Edgar Brucke, Martin Wagener, Moritz Fontboté-Schmidt +10 more

We present the design, fabrication, and characterization of a monolithic, segmented, three-dimensional linear Paul ion trap for quantum science applications. The trap is fabricated from a single fused-silica block using selective laser-induced etching (SLE) and is subsequently metallized, forming electrodes isolated by self-shadowing trench structures without the need for layer alignment or external shadow masks. The segmented electrodes allow for shaping of the axial potential, enabling the creation of anharmonic potential wells, such as those required for equidistant ion strings. In addition, they enable shuttling and splitting of ion chains. We discuss key design choices and SLE-imposed constraints on achievable feature sizes, and evaluate electron-beam evaporation and magnetron sputtering as metallization approaches. Across two independent experimental setups, we demonstrate stable trapping and control of linear chains of up to 33 $^{40}$Ca$^+$ ions, including approximately equally spaced configurations. The measured secular frequencies in both traps agree with boundary-element simulations at the percent level, with residual deviations attributed to stray electric fields in the presence of anharmonic axial potentials, rather than fabrication imperfections. We measure axial micromotion field strengths on the order of 100 V/m along the trap axis, in approximate agreement with simulations. For radial mode frequencies near 2 MHz and an ion-electrode distance of 300 um, we measure heating rates of the order of 10 quanta/s in all but one motional mode, which is elevated by a technical noise source. The presented trap design is thus suitable for a wide range of quantum science applications and demonstrates the viability of SLE for the fabrication of finely segmented, monolithic, three-dimensional ion traps.

physics.atom-phCross-listedarXiv:2609.01694•Sep 2, 2026•2 citations

Industrially microfabricated ion trap with 1 eV trap depth

Silke Auchter, Christopher J. Axline, Chiara Decaroli +12 more

Abstract Scaling trapped-ion quantum computing will require robust trapping of at least hundreds of ions over long periods, while increasing the complexity and functionality of the trap itself. Symmetric three-dimensional (3D) structures enable high trap depth, but microfabrication techniques are generally better suited to planar structures that produce less ideal conditions for trapping. We present an ion trap fabricated on stacked eight-inch wafers in a large-scale micro-electro-mechanical system microfabrication process that provides reproducible traps at a large volume. Electrodes are patterned on the surfaces of two opposing wafers bonded to a spacer, forming a 3D structure with 2.5 μm standard deviation in alignment across the stack. We implement a design achieving a trap depth of 1 eV for a 40Ca+ ion held at 200 μm from either electrode plane. We characterize traps, achieving measurement agreement with simulations to within ±5% for mode frequencies spanning 0.6–3.8 MHz, and evaluate stray electric field across multiple trapping sites. We measure motional heating rates over an extensive range of trap frequencies, and temperatures, observing 40 phonons/s at 1 MHz and 185 K. This fabrication method provides a highly scalable approach for producing a new generation of 3D ion traps.

arXiv:2202.08244•Quantum Science and Technology•May 17, 2022•27 citations
We leverage recent advances in 3D-printing technology to design and fabricate a micro-ion trap with a spatially distinct loading zone for more efficient loading of ions from effusive thermal ovens. The design reduces the Mathieu-qqq parameter in the loading zone by increasing the ion-electrode separation r0r_0r0​, thereby potentially facilitating more effective laser cooling of hot ions. This circumvents the temporary thermal instability that arises when the rf potential is reduced during ion loading, a common practice to enable efficient laser cooling of hot ions. Simulations predict that expanding r0r_0r0​ maintains a high trapped ion fraction from a simulated thermal source across a wide range of Mathieu-qqq parameters. We demonstrate the manufacturability of this design by 3D-printing the rf rails of a four-rod ion trap and discuss the limitations imposed by state-of-the-art additive manufacturing techniques. We briefly compare hot-ion capture in the three-dimensional design presented here with that in a representative planar trap, illustrating one instance in which the former may be better for loading. The article concludes with an outlook for how this design may be incorporated into a quantum-CCD architecture to enhance ion loading and reduce associated experimental overheads.
We introduce an ion trap platform based on a 3D-printed micro-junction array, designed to implement quantum charge-coupled device (QCCD) architectures for large-scale quantum information processing (QIP). The integration of three-dimensionally structured micro Radio-Frequency (RF) electrodes above a surface-electrode trap enables flexible control of electric field profiles across both linear and junction regions. Through simulations, we demonstrate that the linear region exhibits deeper and more harmonic ion confinement with reduced RF drive power compared to conventional planar traps. Crucially, we identify a junction geometry that maintains uniform ion confinement during transport while substantially reducing the pseudopotential barrier. This reduction facilitates low-heating, high-fidelity transport of single- and multi-species ion crystals. Our results establish a viable route toward fault-tolerant quantum computing by enabling modular and scalable QCCD systems based on the state-of-the-art 3D-printing technologies.
The majority of microfabricated ion traps in use for quantum information processing are of the 2D 'surface-electrode' type or of the 3D 'wafer' type. Surface-electrode traps greatly simplify fabrication and hold the promise of allowing trapped-ion quantum computers to scale via standard semiconductor industry fabrication techniques. However, their geometry constrains them to having much lower trapping efficiency, depth, and harmonicity compared to 3D geometries. Conversely 3D geometries offer superior trap performance but fabrication is more complex, limiting potential to scale. We describe new 'trench' geometries that exist in the design space between these two paradigms. They still allow for a simple, planar electrode layer but with much more favourable trapping properties. We propose such traps could be 3D-printed over a 2D wafer with microfabricated components already integrated into it, thus retaining all the integration techniques and scaling advantages of surface-electrode traps. As a proof of principle we use 2-photon direct laser writing lithography to print the required electrode structures with the proposed geometry.
Abstract We demonstrate the ultra-high vacuum compatibility of a microwave-driven electron trap and an atomic oven (for atomic beam generation) fabricated through 3D printing via Laser Powder Bed Fusion (L-PBF). The trap integrates into a coaxial microwave cavity, enabling stable, narrow-band, high-amplitude oscillations of the electric field at the electrodes. The design also supports simultaneous trapping of ions. The oven performs well in ultra-high vacuum (UHV) environments without significant outgassing. In addition to achieving the UHV regime for 3D-printed components, pressure variations and their potential impact on electron-ion trapping experiments were investigated over a month. Our results show that experiments with electrons photodetached from trapped and laser-cooled ions are feasible with the trap and oven manufactured by the L-PBF method. These findings establish a foundation for future experiments in microwave detection and the study of low-energy ion-electron interactions at room temperature.
Chiaverini et al. [Quantum Inf. Comput. 5, 419 (2005)] recently suggested a linear Paul trap geometry for ion-trap quantum computation that places all of the electrodes in a plane. Such planar ion traps are compatible with modern semiconductor fabrication techniques and can be scaled to make compact, many-zone traps. In this paper we present an experimental realization of planar ion traps using electrodes on a printed circuit board to trap linear chains of tens of charged particles of $0.44\phantom{\rule{0.3em}{0ex}}\mathrm{\ensuremath{\mu}}\mathrm{m}$ diameter in a vacuum of $15\phantom{\rule{0.3em}{0ex}}\mathrm{Pa}\phantom{\rule{0.3em}{0ex}}({10}^{\ensuremath{-}1}\phantom{\rule{0.3em}{0ex}}\mathrm{torr})$. With these traps we address concerns about the low trap depth of planar ion traps and develop control electrode layouts for moving ions between trap zones without facing some of the technical difficulties involved in an atomic ion-trap experiment. Specifically, we use a trap with 36 zones (77 electrodes) arranged in a cross to demonstrate loading from a traditional four-rod linear Paul trap, linear ion movement, splitting and joining of ion chains, and movement of ions through intersections. We further propose an additional dc-biased electrode above the trap which increases the trap depth dramatically, and a planar ion-trap geometry that generates a two-dimensional lattice of point Paul traps.
We present the design, fabrication, and characterization of a monolithic, segmented, three-dimensional linear Paul ion trap for quantum science applications. The trap is fabricated from a single fused-silica block using selective laser-induced etching (SLE) and is subsequently metallized, forming electrodes isolated by self-shadowing trench structures without the need for layer alignment or external shadow masks. The segmented electrodes allow for shaping of the axial potential, enabling the creation of anharmonic potential wells, such as those required for equidistant ion strings. In addition, they enable shuttling and splitting of ion chains. We discuss key design choices and SLE-imposed constraints on achievable feature sizes, and evaluate electron-beam evaporation and magnetron sputtering as metallization approaches. Across two independent experimental setups, we demonstrate stable trapping and control of linear chains of up to 33 40^{40}40Ca+^++ ions, including approximately equally spaced configurations. The measured secular frequencies in both traps agree with boundary-element simulations at the percent level, with residual deviations attributed to stray electric fields in the presence of anharmonic axial potentials, rather than fabrication imperfections. We measure axial micromotion field strengths on the order of 100 V/m along the trap axis, in approximate agreement with simulations. For radial mode frequencies near 2 MHz and an ion-electrode distance of 300 um, we measure heating rates of the order of 10 quanta/s in all but one motional mode, which is elevated by a technical noise source. The presented trap design is thus suitable for a wide range of quantum science applications and demonstrates the viability of SLE for the fabrication of finely segmented, monolithic, three-dimensional ion traps.
Abstract Scaling trapped-ion quantum computing will require robust trapping of at least hundreds of ions over long periods, while increasing the complexity and functionality of the trap itself. Symmetric three-dimensional (3D) structures enable high trap depth, but microfabrication techniques are generally better suited to planar structures that produce less ideal conditions for trapping. We present an ion trap fabricated on stacked eight-inch wafers in a large-scale micro-electro-mechanical system microfabrication process that provides reproducible traps at a large volume. Electrodes are patterned on the surfaces of two opposing wafers bonded to a spacer, forming a 3D structure with 2.5 μm standard deviation in alignment across the stack. We implement a design achieving a trap depth of 1 eV for a 40Ca+ ion held at 200 μm from either electrode plane. We characterize traps, achieving measurement agreement with simulations to within ±5% for mode frequencies spanning 0.6–3.8 MHz, and evaluate stray electric field across multiple trapping sites. We measure motional heating rates over an extensive range of trap frequencies, and temperatures, observing 40 phonons/s at 1 MHz and 185 K. This fabrication method provides a highly scalable approach for producing a new generation of 3D ion traps.