We present Stochastic Commutator Synthesis, a hybrid quantum gate compilation framework that integrates Kuperberg's sub-cubic Solovay-Kitaev exponent c near 1.44042 with the error-tailoring machinery of randomized compilation. Classical Solovay-Kitaev implementations produce known word lengths and accumulate coherent approximation errors that degrade fault-tolerant threshold estimates. Kuperberg's 2023-2025 result reduces this via doubly exponential convergence and higher-order commutator decompositions. SCS augments this geometric backbone with a Gibbs-sampled stochastic choice of commutator factors at each recursion level, converting coherent synthesis residuals into incoherent, Pauli-twirl-compatible noise -- a property exploited by RC. Combined with RL-guided pre-synthesis, SCS achieves consistent T-count reductions of 10-25 percent and demonstrates fidelity gains of up to 35 percent on multi-fold Forrelation circuits on trapped-ion hardware such as Sandia QSCOUT. We situate SCS within the complexity-theoretic landscape established by the Raz-Tal oracle separation, arguing that low-error, noise-robust compilation of Forrelation-type circuits constitutes a practical pathway toward demonstrating this separation on physical hardware.
We present Stochastic Commutator Synthesis, a hybrid quantum gate compilation framework that integrates Kuperberg's sub-cubic Solovay-Kitaev exponent c near 1.44042 with the error-tailoring machinery of randomized compilation. Classical Solovay-Kitaev implementations produce known word lengths and accumulate coherent approximation errors that degrade fault-tolerant threshold estimates. Kuperberg's 2023-2025 result reduces this via doubly exponential convergence and higher-order commutator decompositions. SCS augments this geometric backbone with a Gibbs-sampled stochastic choice of commutator factors at each recursion level, converting coherent synthesis residuals into incoherent, Pauli-twirl-compatible noise -- a property exploited by RC. Combined with RL-guided pre-synthesis, SCS achieves consistent T-count reductions of 10-25 percent and demonstrates fidelity gains of up to 35 percent on multi-fold Forrelation circuits on trapped-ion hardware such as Sandia QSCOUT. We situate SCS within the complexity-theoretic landscape established by the Raz-Tal oracle separation, arguing that low-error, noise-robust compilation of Forrelation-type circuits constitutes a practical pathway toward demonstrating this separation on physical hardware.
We analyze the use of the Solovay Kitaev (SK) algorithm to generate an ensemble of one qubit rotations over which to perform randomized compilation. We perform simulations to compare the trace distance between the quantum state resulting from an ideal one qubit RZ rotation and discrete SK decompositions. We find that this simple randomized gate synthesis algorithm can reduce the approximation error of these rotations in the absence of gate errors in simulation by at least a factor of two compared to a naive gate synthesis algorithm. We test the technique under the effects of a simple coherent noise model and find that it can mitigate coherent noise. We also run our algorithm on Sandia National Laboratories' QSCOUT trapped-ion device and find that randomization is able to help in the presence of realistic noise sources.
Quantum circuit synthesis is one of the major areas of current research in the field of quantum computing.Analogous to its Boolean counterpart, the task involves constructing arbitrary quantum gates using only those available within a small set of universal gates that can be realized physically.However, unlike the latter, there are an infinite number of single qubit quantum gates, all of which constitute the special unitary group SU(2).Realizing any given single qubit gate using a given universal gate family is a complex task.Although gates can be synthesized to arbitrary degree of precision as long as the set of finite strings of the gate family is a dense subset of SU(2), it is desirable to accomplish the highest level of precision using only the minimum number of universal gates within the string approximation.Almost all algorithms that have been proposed for this purpose are based on the Solovay-Kitaev algorithm.The crux of the Solovay-Kitaev algorithm is the use of a procedure to decompose a given quantum gate into a pair of group commutators with the pair being synthesized separately.The Solovay-Kitaev algorithm involves group commutator decomposition in a recursive manner, with a direct approximation of a gate into a string of universal gates being performed only at the last level, i.e. in the leaf nodes of the search tree representing the execution of the Solovay-Kitaev algorithm.The main contribution of this research is in integrating conventional optimization procedures within the Solovay-Kitaev algorithm.Two specific directions of research have been studied.Firstly, optimization is incorporated within the group commutator decomposition, so that a more optimal pair of group commutators are obtained.As the degree of precision of the synthesized gate is explicitly minimized by means of this optimization procedure, the enhanced algorithm allows for more accurate quantum gates to be synthesized than what the original Solovay-Kitaev algorithm achieves.Simulation results with random gates indicate that the obtained accuracy is an order of magnitude better than before.Two versions of the new algorithm are examined, with the optimization in the first version being invoked only at the bottom level of Solovay-Kitaev algorithm and when carried out across all levels of the search tree in the next.Extensive simulations show that the second version yields better results despite equivalent computation times.Theoretical analysis of the proposed algorithm is able to provide a more formal, quantitative explanation underlying the experimentally observed phenomena.The other direction of investigation of this research involves formulating the group commutator decomposition in the form of bi-criteria optimization.This phase of research relaxed the equality constraint in the previous approach and with relaxation, a bi-criteria optimization is proposed.This optimization algorithm is new and has been devised primarily when the objective needs to be relaxed in different stages.This bi-criteria approach is able to provide comparably accurate synthesis as the previous approach.
Fault-tolerant architectures implement non-Clifford T gates through magic-state distillation, so the T-count of a synthesized circuit dominates its physical cost. The Solovay-Kitaev algorithm approximates any single-qubit unitary from a finite gate set with a sequence length that grows only polylogarithmically in the inverse target error, but it optimizes for numerical convergence rather than circuit economy, and its output carries structural redundancy that a gate-level compiler cannot see. We report a measurement of what diagrammatic post-processing recovers from that redundancy. Twelve hundred random single-qubit targets, spanning the three Pauli rotation families and the general gate U(theta, phi, lambda), are synthesized over Clifford+T at three recursion depths, translated into graph-like ZX-diagrams, simplified by automated rewriting, and extracted back to circuits. Post-processing removes 26.6-30.1% of the total gate count and 18.5-22.2% of the T-count. The absolute saving grows with recursion depth, from about 60 to about 1600 gates, while the fractional saving does not: it rises slightly from the shallowest setting and is then flat across a twenty-five-fold change in circuit length, and by the deepest setting the four target families are no longer distinguishable from one another. Because the rewrite rules preserve the implemented linear map, the approximation error is unchanged. The compile-time cost of the rewriting layer, by contrast, grows sharply with depth and comes to dominate the synthesis itself.
Current hardware for quantum computing suffers from high levels of noise, and so to achieve practical fault-tolerant quantum computing will require powerful and efficient methods to correct for errors in quantum circuits. Here, we explore the role and effectiveness of using noise tailoring techniques to improve the performance of error correcting codes. Noise tailoring methods such as randomized compiling (RC) convert complex coherent noise processes to effective stochastic noise. While it is known that this can be leveraged to design efficient diagnostic tools, we explore its impact on the performance of error correcting codes. Of particular interest is the important class of coherent errors, arising from control errors, where RC has the maximum effect---converting these into purely stochastic errors. For these errors, we show here that RC delivers an improvement in performance of the concatenated Steane code by several orders of magnitude. We also show that below a threshold rotation angle, the gains in logical fidelity can be arbitrarily magnified by increasing the size of the codes. These results suggest that using randomized compiling can lead to a significant reduction in the resource overhead required to achieve fault tolerance.
Quantum computers are poised to radically outperform their classical counterparts by manipulating coherent quantum systems. A realistic quantum computer will experience errors due to the environment and imperfect control. When these errors are even partially coherent, they present a major obstacle to performing robust computations. Here, we propose a method for introducing independent random single-qubit gates into the logical circuit in such a way that the effective logical circuit remains unchanged. We prove that this randomization tailors the noise into stochastic Pauli errors, which can dramatically reduce error rates while introducing little or no experimental overhead. Moreover, we prove that our technique is robust to the inevitable variation in errors over the randomizing gates and numerically illustrate the dramatic reductions in worst-case error that are achievable. Given such tailored noise, gates with significantly lower fidelity---comparable to fidelities realized in current experiments---are sufficient to achieve fault-tolerant quantum computation. Furthermore, the worst-case error rate of the tailored noise can be directly and efficiently measured through randomized benchmarking protocols, enabling a rigorous certification of the performance of a quantum computer.
The rapid evolution of Noisy Intermediate-Scale Quantum (NISQ) devices has intensified the need for robust compilation strategies capable of mitigating hardware-induced errors while maximizing computational efficiency. Quantum compilers play a pivotal role in translating high-level quantum algorithms into hardware-executable instructions, yet they face significant challenges related to qubit connectivity constraints, limited coherence times, and stochastic noise. This paper examines error-resilient quantum compiler design for efficient qubit mapping, gate optimization, and noise mitigation in NISQ-era devices, proposing a framework that integrates topology-aware mapping, adaptive gate synthesis, and probabilistic error suppression techniques. By synthesizing advances in quantum circuit optimization, hardware-aware scheduling, and hybrid classical–quantum error correction strategies, the study evaluates how compiler-level innovations can substantially enhance execution fidelity and resource efficiency. The findings suggest that intelligent compiler architectures are critical enablers of practical quantum advantage during the transitional NISQ phase, bridging theoretical algorithm design with real-world hardware constraints.