Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2604.18711

Large Scale Optimization of Disordered Hubbard Models through Tensor and Neural Networks

Jacob R. Taylor, S. Das Sarma

Published Apr 20, 2026• 0 citations
arXivHTMLPDF

Abstract

We theoretically demonstrate a practical method for tuning randomly disordered 2D quantum-dot grids underlying spin qubit platforms using vision-based neural networks trained on tensor-network generated charge-stability data. We show that a simulatable local $3\times 3$ window already contains sufficient information to tune the central dot within a much larger array, thereby validating a sliding-window approach in which one tunes a local region and then translates that window across the lattice to calibrate a larger device. This avoids the computationally intractable necessity for obtaining the ground states for large systems with exponentially large Hilbert space. For the experimentally relevant case where only the on-site disorder is unknown, the neural network predicts the relevant parameters with very high fidelity in the $3\times 3$ setting [$R^2 >0.99$], and after fine tuning on only a small number of larger-device samples, it retains high accuracy for the central dot of a $5\times 5$ plaquette [$R^2\approx 0.98$]. When all the dots parameters are treated as unknown, prediction of the on-site disorder remains robust [$R^2>0.9$ for both $3\times 3$ and $5\times 5$], although the remaining parameters are substantially more difficult to infer from the same charge-stability data. This shows that the most practically important disorder parameter for tuning can still be inferred reliably even in the fully disordered setting for the computationally difficult 5x5 arrays.

DOI
10.48550/arxiv.2604.18711

Related papers

Neural network based deep learning analysis of semiconductor quantum dot qubits for automated control

Jacob Taylor, S. Das Sarma

In this paper, we introduce a methodology that employs machine learning, specifically convolutional neural networks (CNNs), to discern the disorder landscape in the parameters of the disordered extended Hubbard model underlying the semiconductor quantum dot spin qubit architectures. Our approach, which we demonstrate with numerically simulated devices, takes advantage of currently used experimentally obtainable charge stability diagrams from neighboring quantum dot pairs, enabling the CNN to accurately identify disorder in each parameter of the extended Hubbard model. Remarkably, our CNN can process site-specific disorder in Hubbard parameters, including variations in hopping constants, on-site potentials (gate voltages), and both intrasite and intersite Coulomb terms. This advancement facilitates the prediction of spatially dependent disorder across all parameters simultaneously with high accuracy (${R}^{2}>0.994$) and fewer parameter constraints, marking a significant improvement over previous methods that were focused only on analyzing on-site potentials at low coupling. Furthermore, our approach allows for the tuning of five or more quantum dots at a time, effectively addressing the often-overlooked issue of crosstalk. Not only does our method streamline the tuning process, potentially enabling fully automated adjustments, but it also introduces a ``no trust'' verification method to rigorously validate the neural network's predictions. Ultimately, this paper aims to lay the groundwork for generalizing our method to tackle a broad spectrum of physical problems.

arXiv:2405.04524•Physical review. B./Physical review. B•Jan 3, 2025•16 citations

Predicting spin-orbit coupling in hole spin qubit arrays with vision-transformer-based neural networks on a generalized Hubbard model

Jacob R. Taylor, Katharina Laubscher, S. Das Sarma

We introduce a neural-network-based machine learning method to predict the effective spin-orbit coupling (SOC) strength in hole quantum dot arrays from standard charge stability diagrams. Specifically, we study a $2\times 2$ Ge hole quantum dot array described by a generalized spin-orbit coupled Hubbard model that incorporates random site- and bond-dependent disorder in all system parameters, including onsite potentials, Coulomb interaction strengths, interdot tunneling amplitudes, as well as the direction and angle of the SOC-induced spin rotations accompanying interdot tunneling. We train the neural network on numerically simulated charge stability diagrams from nearest-neighbor pairs of quantum dots for different chemical potentials and out-of-plane magnetic fields, and show that this enables us to predict the SOC-induced spin-flip tunneling amplitudes -- and, thus, the effective SOC strength -- with high fidelity ($R^2\approx 0.94$) even when all other Hubbard model parameters are unknown. Furthermore, our neural network can also predict the other Hubbard model parameters with high fidelity, demonstrating that neural-network-based approaches can be a powerful tool for the automated characterization of hole spin qubit arrays.

arXiv:2604.05052•Physical review. B./Physical review. B•Oct 27, 2026•1 citation

Machine learning techniques for state recognition and auto-tuning in quantum dots

Sandesh S. Kalantre, Justyna P. Zwolak, Stephen Ragole +4 more

Abstract Recent progress in building large-scale quantum devices for exploring quantum computing and simulation has relied upon effective tools for achieving and maintaining good experimental parameters, i.e., tuning up devices. In many cases, including quantum dot-based architectures, the parameter space grows substantially with the number of qubits, and may become a limit to scalability. Fortunately, machine learning techniques for pattern recognition and image classification, using so-called deep neural networks, have shown surprising successes for computer-aided understanding of complex systems. We propose a new paradigm for fully automated experimental initialization through a closed-loop system relying on machine learning and optimization techniques. We use deep convolutional neural networks to characterize states and charge configurations of semiconductor quantum dot arrays when only measurements of a current−voltage characteristic of transport are available. For simplicity, we model a semiconductor nanowire connected to leads and capacitively coupled to depletion gates using the Thomas−Fermi approximation and Coulomb blockade physics. We then generate labeled training data for the neural networks, and find at least 90 % accuracy for charge and state identification for single and double dots. Using these characterization networks, we can then optimize the parameter space to achieve a desired configuration of the array, a technique we call “auto-tuning”. Finally, we show how such techniques can be implemented in an experimental setting by applying our approach to an experimental dataset, and outline further problems in this domain, from using charge sensing data to extensions to full one- and two-dimensional arrays, that can be tackled with machine learning.

arXiv:1712.04914•npj Quantum Information•Jan 14, 2019•122 citations

Miniaturizing neural networks for charge state autotuning in quantum dots

Stefanie Czischek, Victor Yon, Marc-Antoine Genest +8 more

Abstract A key challenge in scaling quantum computers is the calibration and control of multiple qubits. In solid-state quantum dots (QDs), the gate voltages required to stabilize quantized charges are unique for each individual qubit, resulting in a high-dimensional control parameter space that must be tuned automatically. Machine learning techniques are capable of processing high-dimensional data—provided that an appropriate training set is available—and have been successfully used for autotuning in the past. In this paper, we develop extremely small feed-forward neural networks that can be used to detect charge-state transitions in QD stability diagrams. We demonstrate that these neural networks can be trained on synthetic data produced by computer simulations, and robustly transferred to the task of tuning an experimental device into a desired charge state. The neural networks required for this task are sufficiently small as to enable an implementation in existing memristor crossbar arrays in the near future. This opens up the possibility of miniaturizing powerful control elements on low-power hardware, a significant step towards on-chip autotuning in future QD computers.

arXiv:2101.03181•Machine Learning Science and Technology•Nov 23, 2021•27 citations

Robust quantum dots charge autotuning using neural network uncertainty

Victor Yon, Bastien Galaup, Claude Rohrbacher +10 more

Abstract This study presents a machine learning-based procedure to automate the charge tuning of semiconductor spin qubits with minimal human intervention, addressing one of the significant challenges in scaling up quantum dot technologies. This method exploits artificial neural networks to identify noisy transition lines in stability diagrams, guiding a robust exploration strategy leveraging neural network uncertainty estimations. Tested across three distinct offline experimental datasets representing different single-quantum-dot technologies, this approach achieves a tuning success rate of over 99% in optimal cases, where more than 10% of the success is directly attributable to uncertainty exploitation. The challenging constraints of small training sets containing high diagram-to-diagram variability allowed us to evaluate the capabilities and limits of the proposed procedure.

arXiv:2406.05175•Machine Learning Science and Technology•Oct 18, 2024•7 citations

Experimental Online Quantum Dots Charge Autotuning Using Neural Networks

Victor Yon, Bastien Galaup, Claude Rohrbacher +11 more

Spin-based semiconductor qubits hold promise for scalable quantum computing, yet they require reliable autonomous calibration procedures. This study presents an experimental demonstration of online single-dot charge autotuning using a convolutional neural network integrated into a closed-loop calibration system. The autotuning algorithm explores the gates' voltage space to localize charge transition lines, thereby isolating the one-electron regime without human intervention. This exploration leverages the model's uncertainty estimation to find the appropriate gate configuration with minimal measurements while reducing the risk of failures. In 20 experimental runs, our method achieved a success rate of 95% in locating the target electron regime, highlighting the robustness of this approach against noise and distribution shifts from the offline training set. Each tuning run lasted an average of 2 h and 9 min, primarily due to the limited speed of the current measurement. This work validates the feasibility of machine-learning-driven real-time charge autotuning for quantum dot devices, advancing the development toward the control of large qubit arrays.

arXiv:2409.20320•Nano Letters•Feb 27, 2025•8 citations
We theoretically demonstrate a practical method for tuning randomly disordered 2D quantum-dot grids underlying spin qubit platforms using vision-based neural networks trained on tensor-network generated charge-stability data. We show that a simulatable local 3×33\times 33×3 window already contains sufficient information to tune the central dot within a much larger array, thereby validating a sliding-window approach in which one tunes a local region and then translates that window across the lattice to calibrate a larger device. This avoids the computationally intractable necessity for obtaining the ground states for large systems with exponentially large Hilbert space. For the experimentally relevant case where only the on-site disorder is unknown, the neural network predicts the relevant parameters with very high fidelity in the 3×33\times 33×3 setting [R2>0.99R^2 >0.99R2>0.99], and after fine tuning on only a small number of larger-device samples, it retains high accuracy for the central dot of a 5×55\times 55×5 plaquette [R2≈0.98R^2\approx 0.98R2≈0.98]. When all the dots parameters are treated as unknown, prediction of the on-site disorder remains robust [R2>0.9R^2>0.9R2>0.9 for both 3×33\times 33×3 and 5×55\times 55×5], although the remaining parameters are substantially more difficult to infer from the same charge-stability data. This shows that the most practically important disorder parameter for tuning can still be inferred reliably even in the fully disordered setting for the computationally difficult 5x5 arrays.
In this paper, we introduce a methodology that employs machine learning, specifically convolutional neural networks (CNNs), to discern the disorder landscape in the parameters of the disordered extended Hubbard model underlying the semiconductor quantum dot spin qubit architectures. Our approach, which we demonstrate with numerically simulated devices, takes advantage of currently used experimentally obtainable charge stability diagrams from neighboring quantum dot pairs, enabling the CNN to accurately identify disorder in each parameter of the extended Hubbard model. Remarkably, our CNN can process site-specific disorder in Hubbard parameters, including variations in hopping constants, on-site potentials (gate voltages), and both intrasite and intersite Coulomb terms. This advancement facilitates the prediction of spatially dependent disorder across all parameters simultaneously with high accuracy (R2>0.994{R}^{2}>0.994R2>0.994) and fewer parameter constraints, marking a significant improvement over previous methods that were focused only on analyzing on-site potentials at low coupling. Furthermore, our approach allows for the tuning of five or more quantum dots at a time, effectively addressing the often-overlooked issue of crosstalk. Not only does our method streamline the tuning process, potentially enabling fully automated adjustments, but it also introduces a ``no trust'' verification method to rigorously validate the neural network's predictions. Ultimately, this paper aims to lay the groundwork for generalizing our method to tackle a broad spectrum of physical problems.
We introduce a neural-network-based machine learning method to predict the effective spin-orbit coupling (SOC) strength in hole quantum dot arrays from standard charge stability diagrams. Specifically, we study a 2×22\times 22×2 Ge hole quantum dot array described by a generalized spin-orbit coupled Hubbard model that incorporates random site- and bond-dependent disorder in all system parameters, including onsite potentials, Coulomb interaction strengths, interdot tunneling amplitudes, as well as the direction and angle of the SOC-induced spin rotations accompanying interdot tunneling. We train the neural network on numerically simulated charge stability diagrams from nearest-neighbor pairs of quantum dots for different chemical potentials and out-of-plane magnetic fields, and show that this enables us to predict the SOC-induced spin-flip tunneling amplitudes -- and, thus, the effective SOC strength -- with high fidelity (R2≈0.94R^2\approx 0.94R2≈0.94) even when all other Hubbard model parameters are unknown. Furthermore, our neural network can also predict the other Hubbard model parameters with high fidelity, demonstrating that neural-network-based approaches can be a powerful tool for the automated characterization of hole spin qubit arrays.
Abstract Recent progress in building large-scale quantum devices for exploring quantum computing and simulation has relied upon effective tools for achieving and maintaining good experimental parameters, i.e., tuning up devices. In many cases, including quantum dot-based architectures, the parameter space grows substantially with the number of qubits, and may become a limit to scalability. Fortunately, machine learning techniques for pattern recognition and image classification, using so-called deep neural networks, have shown surprising successes for computer-aided understanding of complex systems. We propose a new paradigm for fully automated experimental initialization through a closed-loop system relying on machine learning and optimization techniques. We use deep convolutional neural networks to characterize states and charge configurations of semiconductor quantum dot arrays when only measurements of a current−voltage characteristic of transport are available. For simplicity, we model a semiconductor nanowire connected to leads and capacitively coupled to depletion gates using the Thomas−Fermi approximation and Coulomb blockade physics. We then generate labeled training data for the neural networks, and find at least 90 % accuracy for charge and state identification for single and double dots. Using these characterization networks, we can then optimize the parameter space to achieve a desired configuration of the array, a technique we call “auto-tuning”. Finally, we show how such techniques can be implemented in an experimental setting by applying our approach to an experimental dataset, and outline further problems in this domain, from using charge sensing data to extensions to full one- and two-dimensional arrays, that can be tackled with machine learning.
Abstract A key challenge in scaling quantum computers is the calibration and control of multiple qubits. In solid-state quantum dots (QDs), the gate voltages required to stabilize quantized charges are unique for each individual qubit, resulting in a high-dimensional control parameter space that must be tuned automatically. Machine learning techniques are capable of processing high-dimensional data—provided that an appropriate training set is available—and have been successfully used for autotuning in the past. In this paper, we develop extremely small feed-forward neural networks that can be used to detect charge-state transitions in QD stability diagrams. We demonstrate that these neural networks can be trained on synthetic data produced by computer simulations, and robustly transferred to the task of tuning an experimental device into a desired charge state. The neural networks required for this task are sufficiently small as to enable an implementation in existing memristor crossbar arrays in the near future. This opens up the possibility of miniaturizing powerful control elements on low-power hardware, a significant step towards on-chip autotuning in future QD computers.
Abstract This study presents a machine learning-based procedure to automate the charge tuning of semiconductor spin qubits with minimal human intervention, addressing one of the significant challenges in scaling up quantum dot technologies. This method exploits artificial neural networks to identify noisy transition lines in stability diagrams, guiding a robust exploration strategy leveraging neural network uncertainty estimations. Tested across three distinct offline experimental datasets representing different single-quantum-dot technologies, this approach achieves a tuning success rate of over 99% in optimal cases, where more than 10% of the success is directly attributable to uncertainty exploitation. The challenging constraints of small training sets containing high diagram-to-diagram variability allowed us to evaluate the capabilities and limits of the proposed procedure.
Spin-based semiconductor qubits hold promise for scalable quantum computing, yet they require reliable autonomous calibration procedures. This study presents an experimental demonstration of online single-dot charge autotuning using a convolutional neural network integrated into a closed-loop calibration system. The autotuning algorithm explores the gates' voltage space to localize charge transition lines, thereby isolating the one-electron regime without human intervention. This exploration leverages the model's uncertainty estimation to find the appropriate gate configuration with minimal measurements while reducing the risk of failures. In 20 experimental runs, our method achieved a success rate of 95% in locating the target electron regime, highlighting the robustness of this approach against noise and distribution shifts from the offline training set. Each tuning run lasted an average of 2 h and 9 min, primarily due to the limited speed of the current measurement. This work validates the feasibility of machine-learning-driven real-time charge autotuning for quantum dot devices, advancing the development toward the control of large qubit arrays.