Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2604.15653

Growth of quantum dots by droplet etching epitaxy in molecular beam epitaxy: theory, practice, and review

Declan Gossink, Undurti S. Sainadh, Glenn S. Solomon

cond-mat.mes-hallquant-phSubmitted Apr 17, 2026• Announced Apr 20, 2026
arXivHTMLPDF

Abstract

GaAs quantum dots grown by droplet etching epitaxy are high-quality solid-state sources of quantum light. Despite implementation in devices that exploit quantum phenomenon, a comprehensive review on the crystal growth of quantum dots grown by droplet etching epitaxy is absent, unlike for other quantum dot growth techniques such as the related droplet epitaxy method or Stranski-Krastanov growth of InAs quantum dots. This review presents a detailed overview of the droplet etching epitaxy growth technique in the molecular beam epitaxy environment, with emphasis on the growth parameters necessary to realize high-quality quantum dots. We systematically cover the three main phases of droplet etching epitaxy - droplet deposition, droplet etching, and nanohole regrowth - and relate experimental results to theories on crystal growth. The review concludes with an introduction to GaAs quantum dot photoluminescence and the extension of droplet etching epitaxy beyond the AlGaAs/GaAs material system.

Comments
19 pages, 6 figures

Related papers

Broadband telecom single-photon emissions from InAs/InP quantum dots grown by MOVPE droplet epitaxy

Shichen Zhang, Li Liu, Kai Guo +6 more

The development of quantum materials for single-photon emission is crucial for the advancement of quantum information technology. Although significant advancement has been witnessed in recent years for single photon sources in near infrared band (λ~700-1000 nm), several challenges have yet to be addressed for ideal single photon emission at the telecommunication band. In this study, we present a droplet-epitaxy strategy for O-band to C-band single-photon source based semiconductor quantum dots (QDs) using metal-organic vapor-phase epitaxy (MOVPE). Via investigating the growth conditions of the epitaxial process, we have successfully synthesized InAs/InP QDs with narrow emission lines spanning a broad spectral range of λ~1200-1600 nm. The morphological and optical properties of the samples were characterized using atomic force microscopy and micro photoluminescence spectroscopy. The recorded single-photon purity of a plain QD structure reaches (g(2)(0) = 0.16), with a radiative recombination lifetime as short as 1.5 ns. This work provides a crucial platform for future research on integrated microcavity enhancement techniques and coupled QDs with other quantum photonics in the telecom bands, offering significant prospects for quantum network applications.

physics.opticsCross-listedarXiv:2511.16894•Nov 24, 2025

A Solid-State Source of Single and Entangled Photons at Diamond SiV-Center Transitions Operating at 80K

Xin Cao, Jingzhong Yang, Tom Fandrich +6 more

High Resolution Image Download MS PowerPoint Slide Large-scale quantum networks require the implementation of long-lived quantum memories as stationary nodes interacting with qubits of light. Epitaxially grown quantum dots hold great potential for the on-demand generation of single and entangled photons with high purity and indistinguishability. Coupling these emitters to memories with long coherence times enables the development of hybrid nanophotonic devices that incorporate the advantages of both systems. Here we report the first GaAs/AlGaAs quantum dots grown by the droplet etching and nanohole infilling method, emitting single photons with a narrow wavelength distribution (736.2 ± 1.7 nm) close to the zero-phonon line of silicon-vacancy centers. Polarization entangled photons are generated via the biexciton–exciton cascade with a fidelity of (0.73 ± 0.09). High single photon purity is maintained from 4 K (g (2) (0) = 0.07 ± 0.02) up to 80 K (g (2) (0) = 0.11 ± 0.01), therefore making this hybrid system technologically attractive for real-world quantum photonic applications.

arXiv:2304.14170•Nano Letters•Jun 28, 2023•8 citations

Thin-capping layer epitaxial quantum dots for near-field quantum photonics

Yuting Guo, Jonathan Bar-David, Pasquale Cilibrizzi +3 more

Epitaxial quantum dots (QDs) are widely recognised as one of the best quantum light sources, given their good stability, brightness, quantum efficiency and coherence. To reach such properties, QDs are protected from potentially detrimental surface states by a relatively thick capping layer, typically exceeding 50nm. This prevents the implementation of near-field effects, like plasmonic-based ones, that can dramatically increase the light-matter interaction, since the control of the spontaneous emission dynamics and directionality of the emission can only occur if the emitter is in close proximity (typically tens of nanometers or less) from the metallic structures. In this work, we report the growth and optical characterisation of InAs/GaAs QDs with GaAs capping layer thickness of 10nm, 20nm, and a more standard 95nm. Remarkably, we observe emission linewidths up to 5 times smaller than previously reported, with unperturbed excitonic lifetimes. These results demonstrate that the epitaxial QD's high optical quality can be maintained even when the emitters are at reduced distances from the surface, opening the path for the exploration of near-field light-matter interactions with coherent and stable emitters, suitable for quantum technology applications.

physics.opticsCross-listedarXiv:2610.02080•Oct 2, 2026

Spin properties in droplet epitaxy grown telecom quantum dots

Marius Cizauskas, Elisa Maddalena Sala, Jon Heffernan +3 more

We investigate the spin properties of InAs/InGaAs/InP quantum dots grown by metalorganic vapor-phase epitaxy (MOVPE) deposition using droplet epitaxy, which emits in the telecom C band. Using pump-probe Faraday ellipticity measurements, we determine electron and hole g factors of | g e | = 0.93 and | g h | = 0.47 , with the electron g factor being nearly twice as low as typical molecular beam epitaxy Stranski-Krastanov (SK) grown samples. Most significantly, we measure a longitudinal spin relaxation time T 1 = 3.0 µ s , representing an order of magnitude improvement over comparable MBE SK grown samples. Despite significant electron g -factor anisotropy, we observed that it is reduced relative to similar material composition samples grown with MBE or MOVPE SK methods. We attribute this g -factor anisotropy and spin lifetime improvements to the enhanced structural symmetry achieved via MOVPE droplet epitaxy, which mitigates the inherent structural asymmetry in strain-driven growth approaches for InAs/InP quantum dots. These results demonstrate that MOVPE droplet epitaxy-grown InAs/InGaAs/InP quantum dots exhibit favorable spin properties for potential implementation in quantum information applications.

arXiv:2507.06058•Physical review. B./Physical review. B•Sep 25, 2025•2 citations

Experimental techniques in optical quantum dot control

Vikas Remesh, Gregor Weihs

Solid-state quantum emitters, particularly epitaxial quantum dots (QDs), are one of the most promising platforms of quantum light sources to realize a compact quantum photonic architecture. Optimizing the performance of QDs for such purposes involves both source engineering and photonic control aspects. In this technical review, we examine a broad range of photonic techniques to control light–matter interaction in QDs, from an experimental viewpoint. Achieving full control over photonic degrees of freedom will transform quantum dots from laboratory to standardized building blocks in photonic quantum systems.

Applied Physics Reviews•Apr 21, 2026•1 citation

Strain-free, symmetrical, InGaAs quantum dots as single photon emitters in the telecomC-band

Rabbia Tahir, Paweł Wyborski, Artur Tuktamyshev +4 more

Non-classical photon sources made of semiconductor quantum dots (QDs) emitting in the telecommunication C-band are crucial components for low-loss, long-distance photonic quantum communication networks. Here we designed and fabricated strain--free In$_{0.7}$Ga$_{0.3}$As/In$_{0.7}$Al$_{0.3}$As QDs grown on GaAs(111)A substrates working as single-photon emitters in the 1550 nm window. The QDs were grown via local droplet etching method in a molecular beam epitaxy environment, employing a thin In$_{0.7}$Al$_{0.3}$As metamorphic buffer layer with the same lattice constant of the QD material, thus allowing for a completely strain--free self-assembly of the QDs. The QDs exhibit a C$_{3v}$ symmetry with a ground state emission in the 1400--1600 nm range. The exciton lifetimes of $\approx$ 1.3--1.9 ns and linewidths as low as $\approx$ 300 $μ$eV show the good quality of the fabricated QDs. Second-order autocorrelation measurements under pulsed excitation confirmed the single-photon purity of the emitters, yielding a $g^{(2)}(0)$ value of $0.141 \pm 0.027$

quant-pharXiv:2605.17332•May 19, 2026
GaAs quantum dots grown by droplet etching epitaxy are high-quality solid-state sources of quantum light. Despite implementation in devices that exploit quantum phenomenon, a comprehensive review on the crystal growth of quantum dots grown by droplet etching epitaxy is absent, unlike for other quantum dot growth techniques such as the related droplet epitaxy method or Stranski-Krastanov growth of InAs quantum dots. This review presents a detailed overview of the droplet etching epitaxy growth technique in the molecular beam epitaxy environment, with emphasis on the growth parameters necessary to realize high-quality quantum dots. We systematically cover the three main phases of droplet etching epitaxy - droplet deposition, droplet etching, and nanohole regrowth - and relate experimental results to theories on crystal growth. The review concludes with an introduction to GaAs quantum dot photoluminescence and the extension of droplet etching epitaxy beyond the AlGaAs/GaAs material system.
The development of quantum materials for single-photon emission is crucial for the advancement of quantum information technology. Although significant advancement has been witnessed in recent years for single photon sources in near infrared band (λ~700-1000 nm), several challenges have yet to be addressed for ideal single photon emission at the telecommunication band. In this study, we present a droplet-epitaxy strategy for O-band to C-band single-photon source based semiconductor quantum dots (QDs) using metal-organic vapor-phase epitaxy (MOVPE). Via investigating the growth conditions of the epitaxial process, we have successfully synthesized InAs/InP QDs with narrow emission lines spanning a broad spectral range of λ~1200-1600 nm. The morphological and optical properties of the samples were characterized using atomic force microscopy and micro photoluminescence spectroscopy. The recorded single-photon purity of a plain QD structure reaches (g(2)(0) = 0.16), with a radiative recombination lifetime as short as 1.5 ns. This work provides a crucial platform for future research on integrated microcavity enhancement techniques and coupled QDs with other quantum photonics in the telecom bands, offering significant prospects for quantum network applications.
High Resolution Image Download MS PowerPoint Slide Large-scale quantum networks require the implementation of long-lived quantum memories as stationary nodes interacting with qubits of light. Epitaxially grown quantum dots hold great potential for the on-demand generation of single and entangled photons with high purity and indistinguishability. Coupling these emitters to memories with long coherence times enables the development of hybrid nanophotonic devices that incorporate the advantages of both systems. Here we report the first GaAs/AlGaAs quantum dots grown by the droplet etching and nanohole infilling method, emitting single photons with a narrow wavelength distribution (736.2 ± 1.7 nm) close to the zero-phonon line of silicon-vacancy centers. Polarization entangled photons are generated via the biexciton–exciton cascade with a fidelity of (0.73 ± 0.09). High single photon purity is maintained from 4 K (g (2) (0) = 0.07 ± 0.02) up to 80 K (g (2) (0) = 0.11 ± 0.01), therefore making this hybrid system technologically attractive for real-world quantum photonic applications.
Epitaxial quantum dots (QDs) are widely recognised as one of the best quantum light sources, given their good stability, brightness, quantum efficiency and coherence. To reach such properties, QDs are protected from potentially detrimental surface states by a relatively thick capping layer, typically exceeding 50nm. This prevents the implementation of near-field effects, like plasmonic-based ones, that can dramatically increase the light-matter interaction, since the control of the spontaneous emission dynamics and directionality of the emission can only occur if the emitter is in close proximity (typically tens of nanometers or less) from the metallic structures. In this work, we report the growth and optical characterisation of InAs/GaAs QDs with GaAs capping layer thickness of 10nm, 20nm, and a more standard 95nm. Remarkably, we observe emission linewidths up to 5 times smaller than previously reported, with unperturbed excitonic lifetimes. These results demonstrate that the epitaxial QD's high optical quality can be maintained even when the emitters are at reduced distances from the surface, opening the path for the exploration of near-field light-matter interactions with coherent and stable emitters, suitable for quantum technology applications.
We investigate the spin properties of InAs/InGaAs/InP quantum dots grown by metalorganic vapor-phase epitaxy (MOVPE) deposition using droplet epitaxy, which emits in the telecom C band. Using pump-probe Faraday ellipticity measurements, we determine electron and hole g factors of | g e | = 0.93 and | g h | = 0.47 , with the electron g factor being nearly twice as low as typical molecular beam epitaxy Stranski-Krastanov (SK) grown samples. Most significantly, we measure a longitudinal spin relaxation time T 1 = 3.0 µ s , representing an order of magnitude improvement over comparable MBE SK grown samples. Despite significant electron g -factor anisotropy, we observed that it is reduced relative to similar material composition samples grown with MBE or MOVPE SK methods. We attribute this g -factor anisotropy and spin lifetime improvements to the enhanced structural symmetry achieved via MOVPE droplet epitaxy, which mitigates the inherent structural asymmetry in strain-driven growth approaches for InAs/InP quantum dots. These results demonstrate that MOVPE droplet epitaxy-grown InAs/InGaAs/InP quantum dots exhibit favorable spin properties for potential implementation in quantum information applications.
Solid-state quantum emitters, particularly epitaxial quantum dots (QDs), are one of the most promising platforms of quantum light sources to realize a compact quantum photonic architecture. Optimizing the performance of QDs for such purposes involves both source engineering and photonic control aspects. In this technical review, we examine a broad range of photonic techniques to control light–matter interaction in QDs, from an experimental viewpoint. Achieving full control over photonic degrees of freedom will transform quantum dots from laboratory to standardized building blocks in photonic quantum systems.
Non-classical photon sources made of semiconductor quantum dots (QDs) emitting in the telecommunication C-band are crucial components for low-loss, long-distance photonic quantum communication networks. Here we designed and fabricated strain--free In0.7_{0.7}0.7​Ga0.3_{0.3}0.3​As/In0.7_{0.7}0.7​Al0.3_{0.3}0.3​As QDs grown on GaAs(111)A substrates working as single-photon emitters in the 1550 nm window. The QDs were grown via local droplet etching method in a molecular beam epitaxy environment, employing a thin In0.7_{0.7}0.7​Al0.3_{0.3}0.3​As metamorphic buffer layer with the same lattice constant of the QD material, thus allowing for a completely strain--free self-assembly of the QDs. The QDs exhibit a C3v_{3v}3v​ symmetry with a ground state emission in the 1400--1600 nm range. The exciton lifetimes of ≈\approx≈ 1.3--1.9 ns and linewidths as low as ≈\approx≈ 300 μμμeV show the good quality of the fabricated QDs. Second-order autocorrelation measurements under pulsed excitation confirmed the single-photon purity of the emitters, yielding a g(2)(0)g^{(2)}(0)g(2)(0) value of 0.141±0.0270.141 \pm 0.0270.141±0.027