Superconducting diodes enable dissipationless directional transport, yet achieving electrical tunability and scalability remains a major challenge for circuit-level integration. Here, we demonstrate an electrothermal-switch superconducting diode in which a gate-controlled nanoscale hotspot dynamically breaks inversion symmetry in a superconducting nanowire. This mechanism gives rise to two coexisting non-reciprocal transport regimes, one associated with a non-reciprocal superconducting-to-normal transition and the other with ratchet-like vortex dynamics, both originating from the same electrothermal-switch process. The diode exhibits efficiencies up to 42 and 60% for the two regimes, respectively, and can be electrically switched on, off, or reversed in polarity in situ by applying a small gate current. These capabilities enable programmable superconducting circuits that realize electrically reconfigurable full-wave and half-wave rectification. The lithography-compatible design, high performance, and gate-controlled functionality establish a scalable platform for programmable superconducting electronics and hybrid quantum systems.
Superconducting diodes enable dissipationless directional transport, yet achieving electrical tunability and scalability remains a major challenge for circuit-level integration. Here, we demonstrate an electrothermal-switch superconducting diode in which a gate-controlled nanoscale hotspot dynamically breaks inversion symmetry in a superconducting nanowire. This mechanism gives rise to two coexisting non-reciprocal transport regimes, one associated with a non-reciprocal superconducting-to-normal transition and the other with ratchet-like vortex dynamics, both originating from the same electrothermal-switch process. The diode exhibits efficiencies up to 42 and 60% for the two regimes, respectively, and can be electrically switched on, off, or reversed in polarity in situ by applying a small gate current. These capabilities enable programmable superconducting circuits that realize electrically reconfigurable full-wave and half-wave rectification. The lithography-compatible design, high performance, and gate-controlled functionality establish a scalable platform for programmable superconducting electronics and hybrid quantum systems.
Non-reciprocal transport underpins key functionalities in signal processing and logic; however, conventional semiconductor diodes exhibit reduced performance at sub-Kelvin temperatures. As cryogenic electronics continue to scale, there is increasing demand for diode operation compatible with low-temperature and low-dissipation conditions. This need has driven the development of alternatives to p-n junctions that rely on non-reciprocal electron transport mechanisms efficient in the deep-cryogenic regime. Superconducting devices constitute a natural low-loss platform, yet most existing superconducting diodes are restricted to either Cooper-pair or quasiparticle transport, often requiring complex material stacks, asymmetric geometries, or external magnetic fields. No single, geometrically symmetric junction has yet integrated rectification across both transport channels to achieve vanishing resistance under forward bias and strongly suppressed conduction under reverse bias. Here, we demonstrate a dynamically reconfigurable dual-function superconducting diode based on a conventional Al/AlOx/Al tunnel junction. Via microwave biharmonic driving, we exploit multi-tone photon-assisted tunneling to independently control dissipationless and dissipative transport channels within the same device. Varying the microwave drive amplitude induces a transition from a supercurrent diode to an ideal quasiparticle diode, achieving rectification efficiencies exceeding those of conventional Schottky diodes and contemporary superconducting diodes. We further demonstrate AC signal rectification under both current-bias and voltage-bias configurations. Finally, we implement a proof-of-concept "absolute diode" that combines zero forward resistance with strongly suppressed reverse conduction. This tunable approach provides a versatile building block for low-power cryogenic electronic architectures.
Efficient, scalable, and magnetic-field-free superconducting diodes are essential for future superconducting electronics; yet, despite significant efforts, such practical devices remain unrealized. The main challenge lies in achieving broad-range in-situ tunability, both for optimization and for achieving transistor-like operation. Here, we study diodes based on four-terminal niobium planar Josephson junctions. We show that the multiterminal structure eliminates the need for an external magnetic field and enables essentially unrestricted in-situ tunability, along with reconfigurability of the diode polarity, leading to new functionality. For example, we demonstrate that such diodes can operate as Gauss neurons via reentrant superconductivity. By deliberately tuning the junction parameters, we obtain effectively infinite nonreciprocity (within experimental resolution) leading to threshold-free ac-current rectification. Such technologically simple, reconfigurable, and broadly tunable diodes could be instrumental for future digital and neuromorphic computing.
The basis for superconducting electronics can broadly be divided between two technologies: the Josephson junction and the superconducting nanowire. While the Josephson junction (JJ) remains the dominant technology due to its high speed and low power dissipation, recently proposed nanowire devices offer improvements such as gain, high fanout, and compatibility with CMOS circuits. Despite these benefits, nanowire-based electronics have largely been limited to binary operations, with devices switching between the superconducting state and a high-impedance resistive state dominated by uncontrolled hotspot dynamics. Unlike the JJ, they cannot increment an output through successive switching and their operation speeds are limited by their slow thermal-reset times. Thus, there is a need for an intermediate device with the interfacing capabilities of a nanowire but a faster, moderated response allowing for modulation of the output. We present a nanowire device based on controlled fluxon transport. We show that the device is capable of responding proportionally to the strength of its input, unlike other nanowire technologies. The device can be operated to produce a multilevel output with distinguishable states, the number of which can be tuned by circuit parameters. Agreement between experimental results and electrothermal circuit simulations demonstrates that the device is classical and may be readily engineered for applications including use as a multilevel memory.
We demonstrate a practical, field-free superconducting diode based on conventional Nb thin-film technology by integrating an intrinsic superconducting phase battery with an asymmetric DC superconducting quantum interference device. Unlike other approaches that require external magnetic fields or gate voltages to break time-reversal symmetry, our design achieves nonreciprocal supercurrents with on-chip phase bias, making it highly suitable for practical applications. The critical operational parameters, including the backward breakdown voltage and reverse resistance, are well defined by the Nb film gap voltage (∼2.8 mV) and the sub-gap resistance of the un-shunted Nb/Al–AlOx/Nb Josephson junctions. The resulting diode exhibits a forward supercurrent of 168 μA at 4.2 K, with a diode efficiency reaching 40%, a comprehensive performance exceeding prior field-free superconducting diodes. To validate its practicality, we fabricate and characterize a superconducting full-wave rectifier consisting of four such diodes. The demonstration of this rectifier highlights its potential as a DC source for superconducting digital circuits, paving the way for scalable, energy-efficient superconducting electronics.
Abstract A Josephson diode is a superconducting circuit element that enables non-reciprocal transport, allowing a dissipationless supercurrent to preferentially flow in a single direction. Existing methods for achieving the required symmetry breaking mostly rely on specifically-designed materials or carefully-engineered circuits composed of multiple Josephson junctions. Here, we investigate the diode effect induced by applying a biharmonic drive to a conventional superconducting tunnel-junction. In the slow-driving regime, the effect is straightforward to understand in a simple adiabatic picture, providing insight in the tunability of the magnitude and directionality of the diode effect through the drive parameters. We then focus on the fast-driving regime, where we show how the more complex physics underlying the dynamics of the junction can be approximated as a cascaded two-tone mixing process. We derive analytic expressions for the diode efficiency as a function of drive parameters in the limit of small driving amplitudes.
Superconducting (SC) electronics (SCE) is one of the major requirements to develop a large-scale practical quantum computing system. (Figs. 1(a)) [1]. Currently, a room temperature conventional computer is used as the control processor which requires a huge number of lossy interconnects to connect with the qubits placed at a few millikelvin temperatures. This, in turn, limits the scalability of the quantum computing system up to hundreds of qubits which is not enough to achieve the full potential [2]. Therefore, along with a suitable cryogenic memory, a cryogenic (preferably superconducting) control processor is required to develop a quantum computing system with thousands of qubits. Moreover, SCE offers ultra-fast (hundreds of gigahertz) and highly energy efficient (sub attojoule/bit) performance [3]. Therefore, SCE is projected to achieve the department of energy (DOE) exascale goal which the conventional supercomputers failed to achieve (Fig. 1(b)) [4]. However, Josephson junction-based SC circuits suffer from limited integration density due to flux trapping, difficulty in driving large impedances, fanning out digital signals, and operating in noisy environments [5]. To address these existing issues, here, we present a novel reconfigurable SC logic circuit using a nano-cryotron (nTron) that can perform 1-input copy, 2-input AND and OR, and 3-input majority logic functionalities. This work can enable the implementation of highly scalable and energy-efficient SC processor since the use of only one device. To achieve the reconfigurable nature of the logic circuit, we utilize the multi-gate switching of nTron.