Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2604.08247

Optimized Gottesman-Kitaev-Preskill Error Correction via Tunable Preprocessing

Xiang-Jiang Chen, Hao-Miao Jiang, Liu-Jun Wang, Qing Chen

quant-phSubmitted Apr 9, 2026• Announced Apr 10, 2026• 0 citations
arXivHTMLPDF

Abstract

The Gottesman-Kitaev-Preskill (GKP) code is a promising bosonic candidate for realizing fault-tolerant quantum computation. Among existing error-correction protocols for GKP code, the Steane-type scheme is a canonical and widely adopted paradigm, yet its intrinsic noise propagation pattern limits further performance improvement. In this work, we propose a preprocessing-based Steane-type (P-Steane) scheme, which introduces a tunable preprocessing stage with squeezing parameters $a$ and $b$ to actively reshape noise propagation, thereby constituting a parameter framework. This framework spans a spectrum of protocols beyond existing methods, reproducing the performance of both the ME-Steane scheme ($a=1$, $b=1$) and the teleportation-based scheme ($a=1/\sqrt{2}$, $b=\sqrt{2}$) as special cases. Crucially, in the small-noise regime and when the data qubit is noisier than the ancilla qubits, P-Steane scheme achieves the minimum product of position- and momentum-quadrature output noise variances when $2a = b$, and consistently outperforms the ME-Steane scheme within a specific squeezing-parameter range under this condition.

Related papers

Performance analysis of GKP error correction

Frederik K. Marqversen, Janus H. Wesenberg, Nikolaj Thomas Zinner +1 more

Quantum error correction is essential for achieving fault-tolerant quantum computing. Gottesman-Kitaev-Preskill (GKP) codes are particularly effective at correcting continuous noise, such as Gaussian noise and loss, and can significantly reduce overhead when concatenated with qubit error-correcting codes like surface codes. GKP error correction can be implemented using either a teleportation-based method, known as Knill error correction, or a quantum non-demolition-based approach, known as Steane error correction. In this work, we conduct a comprehensive performance analysis of these established GKP error correction schemes, deriving an analytical expression for the post-correction GKP squeezing and displacement errors. Our results show that there is flexibility in choosing the entangling gate used with the teleportation-based Knill approach. Furthermore, when implemented using the recently introduced qunaught states, the Knill approach not only achieves superior GKP squeezing compared to other variants but is also the simplest to realize experimentally in the optical domain.

arXiv:2505.14775•May 20, 2025•7 citations

Probabilistic Error Cancellation for Single-Mode Gottesman-Kitaev-Preskill Codes

Victoria Wadewitz, Alessandro Ciani

In order to solve practical problems on a quantum computer, it is necessary to use fault-tolerant quantum error correction schemes to overcome noise: the errors arising from imperfections in physical components. The Gottesman-Kitaev-Preskill (GKP) code aims at achieving this in a hardware efficient manner by encoding finite-dimensional logical subspaces in the Hilbert space of one or more continuous variable modes. In near term implementations, however, it is not feasible to eliminate errors entirely, so it is natural to also employ alternative error mitigation techniques together with error correction. In this work, we study a quantum error mitigation method known as probabilistic error cancellation in the context of the GKP code. We compare Steane-type and teleportation-based GKP error correction, and calculate the sampling overheads associated with the technique for square and hexagonal GKP codes. We employ the stabilizer subsystem decomposition for GKP codes to obtain an effective logical channel for noisy operations that is used to express the ideal one of a target logical unitary. We consider noise from finite squeezing on the data and the two ancilla modes, needed for error correction, and examine the relationship between the sampling overhead and the noise for different decoding methods. Our results are calculated for single- and two-qubit GKP Clifford gates and one round of error correction, and show the nontrivial combination of error correction and mitigation in continuous variable codes.

quant-pharXiv:2609.17095•Sep 16, 2026•0 citations

Quantum error correction with the color-Gottesman-Kitaev-Preskill code

Jiaxuan Zhang, Jian Zhao, Yu-Chun Wu +1 more

The Gottesman-Kitaev-Preskill (GKP) code is an important type of bosonic quantum error-correcting code. Since the GKP code only protects against small shift errors in $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{p}$ and $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{q}$ quadratures, it is necessary to concatenate the GKP code with a stabilizer code for the larger error correction. In this paper, we consider the concatenation of the single-mode GKP code with the two-dimensional (2D) color code (color-GKP code) on the square-octagon lattice. We use the Steane-type scheme with a maximum-likelihood estimation for GKP error correction and show its advantage for the concatenation. In our main paper, the minimum-weight perfect matching algorithm is applied to decode the color-GKP code. Complemented with the continuous-variable information from the GKP code, the threshold of the 2D color code is improved. If only data GKP qubits are noisy, the threshold reaches $\ensuremath{\sigma}\ensuremath{\approx}0.59(\overline{p}\ensuremath{\approx}13.3%)$ compared with $\overline{p}=10.2%$ of the normal 2D color code. If measurements are also noisy, we introduce the generalized restriction decoder on the three-dimensional space-time graph for decoding. The threshold reaches $\ensuremath{\sigma}\ensuremath{\approx}0.46$ when measurements in the GKP error correction are noiseless, and $\ensuremath{\sigma}\ensuremath{\approx}0.24$ when all measurements are noisy. Lastly, the good performance of the generalized restriction decoder is also shown on the normal 2D color code giving the threshold at $3.1%$ under the phenomenological error model.

arXiv:2112.14447•Physical Review A•Dec 20, 2021•18 citations

Energy-Scaled Zero-Noise Extrapolation for Gottesman-Kitaev-Preskill Code

Gui-Zhong Luo, Matthew Otten

The performance of Gottesman-Kitaev-Preskill (GKP) codes, an approach to hardware-efficient quantum error correction, is limited by the finite squeezing capabilities of current experimental platforms. To circumvent this hardware demand, we introduce Energy-Scaled Zero-Noise Extrapolation (ES-ZNE), a quantum error mitigation protocol that uses the mean photon number of the GKP code as a tunable effective noise parameter. The protocol measures logical observables at a series of accessible finite energies and extrapolates the results to the ideal, infinite-energy limit using an ansatz based on the code's asymptotic error scaling. Through simulating a GKP qubit under a pure-loss channel, we demonstrate that ES-ZNE successfully mitigates finite-energy errors, recovering the ideal expectation values (within numerical uncertainty) in the shallow-noise regime. Furthermore, by computationally removing artifacts arising from the finite-energy encoding, our method characterizes the intrinsic performance of the ideal GKP code, revealing a sharp error threshold beyond which the code's corrective power diminishes. These results establish ES-ZNE as a practical, software-based strategy for enhancing the performance of near-term bosonic quantum processors, trading sampling overhead for demanding physical resources like high squeezing.

quant-pharXiv:2512.03583•Dec 4, 2025•1 citation

Correcting biased noise using Gottesman-Kitaev-Preskill repetition code with noisy ancilla

Z. Li, Daiqin Su

Concatenation of a bosonic code with a qubit code is one of the promising ways to achieve fault-tolerant quantum computation. As one of the most important bosonic codes, the Gottesman-Kitaev-Preskill (GKP) code is proposed to correct small displacement errors in phase space. If the noise in phase space is biased, the square-lattice GKP code can be concatenated with the repetition code that promises a high fault-tolerant threshold to suppress the logical error. In this work, we study the performance of GKP repetition codes with finite-energy ancillary GKP qubits in correcting biased noise. We find that there exists a critical value of noise variance for the ancillary GKP qubit such that the logical Pauli error rate decreases when increasing the code size. Furthermore, one round of GKP error correction has to be performed before concatenating with the repetition code. Our study paves the way for practical implementation of error correction by concatenating the GKP code with low-level qubit codes.

arXiv:2308.01549•Physical Review A•May 13, 2024•7 citations

Low-Overhead Fault-Tolerant Quantum Error Correction with the Surface-GKP Code

Kyungjoo Noh, Christopher Chamberland, Fernando G. S. L. Brandão

Fault-tolerant quantum error correction is essential for implementing quantum algorithms of significant practical importance.In this work, we propose a highly effective use of the surface Gottesman-Kitaev-Preskill (GKP) code, i.e., the surface code consisting of bosonic GKP qubits instead of bare two-level qubits.In our proposal, we use error-corrected two-qubit gates between GKP qubits and introduce a maximum-likelihood decoding strategy for correcting shift errors in the two-GKP-qubit gates.Our proposed decoding reduces the total CNOT failure rate of the GKP qubits, e.g., from 0.87% to 0.36% at a GKP squeezing of 12 dB, compared to the case where the simple closest-integer decoding is used.Then, by concatenating the GKP code with the surface code, we find that the threshold GKP squeezing is given by 9.9 dB under the the assumption that finite squeezing of the GKP states is the dominant noise source.More importantly, we show that a low logical failure rate p L < 10 -7 can be achieved with moderate hardware requirements, e.g., 291 modes and 97 qubits at a GKP squeezing of 12 dB as opposed to 1457 bare qubits for the standard rotated surface code at an equivalent noise level (i.e., p = 0.36%).Such a low failure rate of our surface-GKP code is possible through the use of space-time correlated edges in the matching graphs of the surface-code decoder.Further, all edge weights in the matching graphs are computed dynamically based on analog information from the GKP error correction using the full history of all syndrome measurement rounds.We also show that a highly squeezed GKP state of GKP squeezing 12 dB can be experimentally realized by using a dissipative stabilization method, namely, the big-small-big method, with fairly conservative experimental parameters.Lastly, we introduce a three-level ancilla scheme to mitigate ancilla decay errors during a GKP state preparation.

arXiv:2103.06994•PRX Quantum•Jan 28, 2022•101 citations
The Gottesman-Kitaev-Preskill (GKP) code is a promising bosonic candidate for realizing fault-tolerant quantum computation. Among existing error-correction protocols for GKP code, the Steane-type scheme is a canonical and widely adopted paradigm, yet its intrinsic noise propagation pattern limits further performance improvement. In this work, we propose a preprocessing-based Steane-type (P-Steane) scheme, which introduces a tunable preprocessing stage with squeezing parameters aaa and bbb to actively reshape noise propagation, thereby constituting a parameter framework. This framework spans a spectrum of protocols beyond existing methods, reproducing the performance of both the ME-Steane scheme (a=1a=1a=1, b=1b=1b=1) and the teleportation-based scheme (a=1/2a=1/\sqrt{2}a=1/2​, b=2b=\sqrt{2}b=2​) as special cases. Crucially, in the small-noise regime and when the data qubit is noisier than the ancilla qubits, P-Steane scheme achieves the minimum product of position- and momentum-quadrature output noise variances when 2a=b2a = b2a=b, and consistently outperforms the ME-Steane scheme within a specific squeezing-parameter range under this condition.
Quantum error correction is essential for achieving fault-tolerant quantum computing. Gottesman-Kitaev-Preskill (GKP) codes are particularly effective at correcting continuous noise, such as Gaussian noise and loss, and can significantly reduce overhead when concatenated with qubit error-correcting codes like surface codes. GKP error correction can be implemented using either a teleportation-based method, known as Knill error correction, or a quantum non-demolition-based approach, known as Steane error correction. In this work, we conduct a comprehensive performance analysis of these established GKP error correction schemes, deriving an analytical expression for the post-correction GKP squeezing and displacement errors. Our results show that there is flexibility in choosing the entangling gate used with the teleportation-based Knill approach. Furthermore, when implemented using the recently introduced qunaught states, the Knill approach not only achieves superior GKP squeezing compared to other variants but is also the simplest to realize experimentally in the optical domain.
In order to solve practical problems on a quantum computer, it is necessary to use fault-tolerant quantum error correction schemes to overcome noise: the errors arising from imperfections in physical components. The Gottesman-Kitaev-Preskill (GKP) code aims at achieving this in a hardware efficient manner by encoding finite-dimensional logical subspaces in the Hilbert space of one or more continuous variable modes. In near term implementations, however, it is not feasible to eliminate errors entirely, so it is natural to also employ alternative error mitigation techniques together with error correction. In this work, we study a quantum error mitigation method known as probabilistic error cancellation in the context of the GKP code. We compare Steane-type and teleportation-based GKP error correction, and calculate the sampling overheads associated with the technique for square and hexagonal GKP codes. We employ the stabilizer subsystem decomposition for GKP codes to obtain an effective logical channel for noisy operations that is used to express the ideal one of a target logical unitary. We consider noise from finite squeezing on the data and the two ancilla modes, needed for error correction, and examine the relationship between the sampling overhead and the noise for different decoding methods. Our results are calculated for single- and two-qubit GKP Clifford gates and one round of error correction, and show the nontrivial combination of error correction and mitigation in continuous variable codes.
The Gottesman-Kitaev-Preskill (GKP) code is an important type of bosonic quantum error-correcting code. Since the GKP code only protects against small shift errors in $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{p}$ and $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{q}$ quadratures, it is necessary to concatenate the GKP code with a stabilizer code for the larger error correction. In this paper, we consider the concatenation of the single-mode GKP code with the two-dimensional (2D) color code (color-GKP code) on the square-octagon lattice. We use the Steane-type scheme with a maximum-likelihood estimation for GKP error correction and show its advantage for the concatenation. In our main paper, the minimum-weight perfect matching algorithm is applied to decode the color-GKP code. Complemented with the continuous-variable information from the GKP code, the threshold of the 2D color code is improved. If only data GKP qubits are noisy, the threshold reaches $\ensuremath{\sigma}\ensuremath{\approx}0.59(\overline{p}\ensuremath{\approx}13.3%)$ compared with p‾=10.2\overline{p}=10.2%p​=10.2 of the normal 2D color code. If measurements are also noisy, we introduce the generalized restriction decoder on the three-dimensional space-time graph for decoding. The threshold reaches $\ensuremath{\sigma}\ensuremath{\approx}0.46$ when measurements in the GKP error correction are noiseless, and $\ensuremath{\sigma}\ensuremath{\approx}0.24$ when all measurements are noisy. Lastly, the good performance of the generalized restriction decoder is also shown on the normal 2D color code giving the threshold at 3.13.1%3.1 under the phenomenological error model.
The performance of Gottesman-Kitaev-Preskill (GKP) codes, an approach to hardware-efficient quantum error correction, is limited by the finite squeezing capabilities of current experimental platforms. To circumvent this hardware demand, we introduce Energy-Scaled Zero-Noise Extrapolation (ES-ZNE), a quantum error mitigation protocol that uses the mean photon number of the GKP code as a tunable effective noise parameter. The protocol measures logical observables at a series of accessible finite energies and extrapolates the results to the ideal, infinite-energy limit using an ansatz based on the code's asymptotic error scaling. Through simulating a GKP qubit under a pure-loss channel, we demonstrate that ES-ZNE successfully mitigates finite-energy errors, recovering the ideal expectation values (within numerical uncertainty) in the shallow-noise regime. Furthermore, by computationally removing artifacts arising from the finite-energy encoding, our method characterizes the intrinsic performance of the ideal GKP code, revealing a sharp error threshold beyond which the code's corrective power diminishes. These results establish ES-ZNE as a practical, software-based strategy for enhancing the performance of near-term bosonic quantum processors, trading sampling overhead for demanding physical resources like high squeezing.
Concatenation of a bosonic code with a qubit code is one of the promising ways to achieve fault-tolerant quantum computation. As one of the most important bosonic codes, the Gottesman-Kitaev-Preskill (GKP) code is proposed to correct small displacement errors in phase space. If the noise in phase space is biased, the square-lattice GKP code can be concatenated with the repetition code that promises a high fault-tolerant threshold to suppress the logical error. In this work, we study the performance of GKP repetition codes with finite-energy ancillary GKP qubits in correcting biased noise. We find that there exists a critical value of noise variance for the ancillary GKP qubit such that the logical Pauli error rate decreases when increasing the code size. Furthermore, one round of GKP error correction has to be performed before concatenating with the repetition code. Our study paves the way for practical implementation of error correction by concatenating the GKP code with low-level qubit codes.
Fault-tolerant quantum error correction is essential for implementing quantum algorithms of significant practical importance.In this work, we propose a highly effective use of the surface Gottesman-Kitaev-Preskill (GKP) code, i.e., the surface code consisting of bosonic GKP qubits instead of bare two-level qubits.In our proposal, we use error-corrected two-qubit gates between GKP qubits and introduce a maximum-likelihood decoding strategy for correcting shift errors in the two-GKP-qubit gates.Our proposed decoding reduces the total CNOT failure rate of the GKP qubits, e.g., from 0.87% to 0.36% at a GKP squeezing of 12 dB, compared to the case where the simple closest-integer decoding is used.Then, by concatenating the GKP code with the surface code, we find that the threshold GKP squeezing is given by 9.9 dB under the the assumption that finite squeezing of the GKP states is the dominant noise source.More importantly, we show that a low logical failure rate p L < 10 -7 can be achieved with moderate hardware requirements, e.g., 291 modes and 97 qubits at a GKP squeezing of 12 dB as opposed to 1457 bare qubits for the standard rotated surface code at an equivalent noise level (i.e., p = 0.36%).Such a low failure rate of our surface-GKP code is possible through the use of space-time correlated edges in the matching graphs of the surface-code decoder.Further, all edge weights in the matching graphs are computed dynamically based on analog information from the GKP error correction using the full history of all syndrome measurement rounds.We also show that a highly squeezed GKP state of GKP squeezing 12 dB can be experimentally realized by using a dissipative stabilization method, namely, the big-small-big method, with fairly conservative experimental parameters.Lastly, we introduce a three-level ancilla scheme to mitigate ancilla decay errors during a GKP state preparation.