Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2604.04509 · New Journal of Physics

Continuous thermochemical sources of AlF molecules

P. Kukreja, Priyansh Agarwal, Maximilian Doppelbauer, Jionghao CAI, Xiangyue Liu, J. E. Padilla‐Castillo, Sebastian Kray, Henrik Haak, Russell Thomas, Stefan Truppe, Boris G. Sartakov, Gerard Meijer, Sid Wright

Published May 19, 2026• 1 citation
arXivHTMLPDF

Abstract

Abstract The AlF molecule, currently subject to laser cooling and trapping efforts, has the advantage that it can be efficiently produced in a thermochemical reaction between sublimated aluminum trifluoride and aluminum metal. Here we present a series of experiments with continuous molecular beam sources of AlF, utilizing this reaction. We demonstrate a compact AlF molecular beam oven whose total far-field brightness is 5 × 10 15 molecules per steradian per second at 923 K, just below the melting temperature of aluminum metal. The continuous output from the oven begins to exceed the peak brightness of a jet-cooled, ablation-based supersonic AlF source for the v = 0 , J = 7 level, and we obtain an excellent signal-to-noise ratio with the oven in pulsed laser ionization spectroscopy experiments. By delivering flux from the oven into a cryogenic Ne buffer gas cell, we lower the rotational temperature of the beam to around 30 K and reduce its most probable forward velocity from 600 m s − 1 to 200 m s − 1 . In addition, we demonstrate that AlF can be made in a simple dispenser package, and observe that molecules thermalize to the laboratory temperature after colliding with vacuum chamber walls of the experiment. The resulting transient AlF vapor may enable direct loading of a molecular magneto-optical trap.

DOI
10.1088/1367-2630/ae6fdf

Related papers

Non-stick vacuum wall collisions with a laser-coolable molecule

P. Kukreja, L. A. Rautenberg, J. C. Blumenstock +3 more

Molecular species that are suitable for direct laser cooling are typically considered lost or destroyed if they collide with an ambient temperature vacuum wall. Here, we study surface collisions with aluminum monofluoride (AlF), a laser-coolable molecule that survives this process with unusually high probability. We detect the outgoing AlF molecules from a single wall collision via Doppler-sensitive laser-induced fluorescence spectroscopy, using incoming supersonic (pulsed) and thermochemical (continuous) molecular beams. The angular, velocity and rovibrational level distributions of the outgoing molecules show near-complete thermalisation to the wall in a single collision event. We determine an upper limit to the surface residence time of about 5$~μ$s, and by monitoring the decay in density of pulses of molecules loaded into a small storage volume, we deduce the surface sticking probability for different materials. For a siloxane-coated metallic surface, the sticking probability of AlF is about 0.015, allowing us to accumulate molecules from the thermochemical source into an ambient temperature storage vessel at densities near $10^{8}~$cm$^{-3}$. This provides a route to compact, portable traps for neutral molecules.

arXiv:2609.11406•Sep 10, 2026•0 citations

Cryogenic buffer gas beams of AlF, CaF, MgF, YbF, Al, Ca, Yb and NO – a comparison

Sidney C. Wright, Maximilian Doppelbauer, Simon Hofsäss +4 more

Cryogenic buffer gas beams are central to many cold molecule experiments. Here, we use absorption and fluorescence spectroscopy to directly compare molecular beams of AlF, CaF, MgF and YbF molecules, produced by chemical reaction of laser ablated atoms with fluorine rich reagents. The beam brightness for AlF is measured as 2×1012 molecules per steradian per pulse in a single rotational state, comparable to an Al atomic beam produced in the same setup. The CaF, MgF and YbF beams show an order of magnitude lower brightness than AlF and far below the brightness of Ca and Yb beams. The addition of either NF3 or SF6 to the cell extinguishes the Al atomic beam, but has a minimal effect on the Ca and Yb beams. NF3 reacts more efficiently than SF6, as a significantly lower flow rate is required to maximise the molecule production, which is particularly beneficial for long-term stability of the AlF beam. We use NO as a proxy for the reactant gas as it can be optically detected. We demonstrate that a cold, rotationally pure NO beam can be generated by laser desorption, thereby gaining insight into the dynamics of the reactant gas inside the buffer gas cell.

arXiv:2209.06564•Molecular Physics•Nov 26, 2022•31 citations

Optical cycling of AlF molecules

S Hofsäss, Maximilian Doppelbauer, S C Wright +5 more

Abstract Aluminium monofluoride (AlF) is a promising candidate for laser cooling and trapping at high densities. We show efficient production of AlF in a bright, pulsed cryogenic buffer gas beam, and demonstrate rapid optical cycling on the Q rotational lines of the A 1Π ↔ X 1Σ+ transition. We measure the brightness of the molecular beam to be >1012 molecules per steradian per pulse in a single rotational state and present a new method to determine its velocity distribution in a single shot. The photon scattering rate of the optical cycling scheme is measured using three different methods, and is compared to theoretical predictions of the optical Bloch equations and a simplified rate equation model. Despite the large number of Zeeman sublevels (up to 216 for the Q(4) transition) involved, a high scattering rate of at least 17(2) × 106 s−1 can be sustained using a single, fixed-frequency laser without the need to modulate the polarisation. We deflect the molecu-lar beam using the radiation pressure force and measure an acceleration of 8.7(1.5) × 105 m s−2. Losses from the optical cycle due to vibrational branching to X 1Σ+, v″ = 1 are addressed efficiently with a single repump laser. Further, we investigate two other loss channels, parity mixing by stray electric fields and photo-ionisation. The upper bounds for these effects are sufficiently low to allow loading into a magneto‐optical trap.

arXiv:2103.15913•New Journal of Physics•Jun 1, 2021•47 citations

Bright, continuous beams of cold free radicals

Jamie Shaw, Daniel McCarron

We demonstrate a cryogenic buffer gas-cooled molecular beam source capable of producing bright, continuous beams of cold and slow free radicals via laser ablation over durations of up to 60 seconds. The source design uses a closed liquid helium reservoir as a large thermal mass to minimize heating and ensure reproducible beam properties during operation. Under typical conditions, the source produces beams of our test species SrF, containing $5\ifmmode\times\else\texttimes\fi{}{10}^{12}$ molecules per steradian per second in the $X{\phantom{\rule{0.16em}{0ex}}}^{2}\mathrm{\ensuremath{\Sigma}}(v=0,N=1)$ state with a rotational temperature of 1.0(2) K and a forward velocity of $140\phantom{\rule{0.28em}{0ex}}\mathrm{m}/\mathrm{s}$. The beam properties are robust and unchanged for multiple cell exit geometries, but depend critically on the helium buffer gas flow rate, which must be $\ensuremath{\ge}10$ standard cubic centimeters per minute to produce bright, continuous beams of molecules for an ablation repetition rate of 55 Hz.

arXiv:2008.00535•Physical Review A•Oct 21, 2020•18 citations

A supersonic laser ablation beam source with narrow velocity spreads

Parul Aggarwal, Hendrick L. Bethlem, A. Boeschoten +14 more

A supersonic beam source for SrF and BaF molecules is constructed by combining the expansion of carrier gas (a mixture of 2% SF6 and 98% argon) from an Even–Lavie valve with laser ablation of a barium/strontium metal target at a repetition rate of 10 Hz. Molecular beams with a narrow translational velocity spread are produced at relative values of Δv/v = 0.053(11) and 0.054(9) for SrF and BaF, respectively. The relative velocity spread of the beams produced in our source is lower in comparison with the results from other metal fluoride beams produced in supersonic laser ablation sources. The rotational temperature of BaF is measured to be 3.5 K. The source produces 6 × 108 and 107 molecules per steradian per pulse in the X2Σ+ (ν = 0, N = 1) state of BaF and SrF molecules, respectively, a state amenable to Stark deceleration and laser cooling.

Review of Scientific Instruments•Mar 1, 2021•21 citations

Intense atomic and molecular beams via neon buffer-gas cooling

David Patterson, Julia Rasmussen, John M. Doyle

We realize a continuous, intense, cold molecular and atomic beam source based on buffer-gas cooling. Hot vapor (up to 600 K) from an oven is mixed with cold (15 K) neon buffer gas, and then emitted into a high-flux beam. The novel use of cold neon as a buffer gas produces a forward velocity distribution and low-energy tail that is comparable to much colder helium-based sources. We expect this source to be trivially generalizable to a very wide range of atomic and molecular species with significant vapor pressure below 1000 K. The source has properties that make it a good starting point for laser cooling of molecules or atoms, cold collision studies, trapping, or nonlinear optics in buffer-gas-cooled atomic or molecular gases. A continuous guided beam of cold deuterated ammonia with a flux of 3 × 10 11 ND 3 molecules s −1 and a continuous free-space beam of cold potassium with a flux of 1 × 10 16 K atoms s −1 are realized.

arXiv:0812.2212•New Journal of Physics•May 14, 2009•82 citations
Abstract The AlF molecule, currently subject to laser cooling and trapping efforts, has the advantage that it can be efficiently produced in a thermochemical reaction between sublimated aluminum trifluoride and aluminum metal. Here we present a series of experiments with continuous molecular beam sources of AlF, utilizing this reaction. We demonstrate a compact AlF molecular beam oven whose total far-field brightness is 5 × 10 15 molecules per steradian per second at 923 K, just below the melting temperature of aluminum metal. The continuous output from the oven begins to exceed the peak brightness of a jet-cooled, ablation-based supersonic AlF source for the v = 0 , J = 7 level, and we obtain an excellent signal-to-noise ratio with the oven in pulsed laser ionization spectroscopy experiments. By delivering flux from the oven into a cryogenic Ne buffer gas cell, we lower the rotational temperature of the beam to around 30 K and reduce its most probable forward velocity from 600 m s − 1 to 200 m s − 1 . In addition, we demonstrate that AlF can be made in a simple dispenser package, and observe that molecules thermalize to the laboratory temperature after colliding with vacuum chamber walls of the experiment. The resulting transient AlF vapor may enable direct loading of a molecular magneto-optical trap.
Molecular species that are suitable for direct laser cooling are typically considered lost or destroyed if they collide with an ambient temperature vacuum wall. Here, we study surface collisions with aluminum monofluoride (AlF), a laser-coolable molecule that survives this process with unusually high probability. We detect the outgoing AlF molecules from a single wall collision via Doppler-sensitive laser-induced fluorescence spectroscopy, using incoming supersonic (pulsed) and thermochemical (continuous) molecular beams. The angular, velocity and rovibrational level distributions of the outgoing molecules show near-complete thermalisation to the wall in a single collision event. We determine an upper limit to the surface residence time of about 5 μ~μ μs, and by monitoring the decay in density of pulses of molecules loaded into a small storage volume, we deduce the surface sticking probability for different materials. For a siloxane-coated metallic surface, the sticking probability of AlF is about 0.015, allowing us to accumulate molecules from the thermochemical source into an ambient temperature storage vessel at densities near 108 10^{8}~108 cm−3^{-3}−3. This provides a route to compact, portable traps for neutral molecules.
Cryogenic buffer gas beams are central to many cold molecule experiments. Here, we use absorption and fluorescence spectroscopy to directly compare molecular beams of AlF, CaF, MgF and YbF molecules, produced by chemical reaction of laser ablated atoms with fluorine rich reagents. The beam brightness for AlF is measured as 2×1012 molecules per steradian per pulse in a single rotational state, comparable to an Al atomic beam produced in the same setup. The CaF, MgF and YbF beams show an order of magnitude lower brightness than AlF and far below the brightness of Ca and Yb beams. The addition of either NF3 or SF6 to the cell extinguishes the Al atomic beam, but has a minimal effect on the Ca and Yb beams. NF3 reacts more efficiently than SF6, as a significantly lower flow rate is required to maximise the molecule production, which is particularly beneficial for long-term stability of the AlF beam. We use NO as a proxy for the reactant gas as it can be optically detected. We demonstrate that a cold, rotationally pure NO beam can be generated by laser desorption, thereby gaining insight into the dynamics of the reactant gas inside the buffer gas cell.
Abstract Aluminium monofluoride (AlF) is a promising candidate for laser cooling and trapping at high densities. We show efficient production of AlF in a bright, pulsed cryogenic buffer gas beam, and demonstrate rapid optical cycling on the Q rotational lines of the A 1Π ↔ X 1Σ+ transition. We measure the brightness of the molecular beam to be >1012 molecules per steradian per pulse in a single rotational state and present a new method to determine its velocity distribution in a single shot. The photon scattering rate of the optical cycling scheme is measured using three different methods, and is compared to theoretical predictions of the optical Bloch equations and a simplified rate equation model. Despite the large number of Zeeman sublevels (up to 216 for the Q(4) transition) involved, a high scattering rate of at least 17(2) × 106 s−1 can be sustained using a single, fixed-frequency laser without the need to modulate the polarisation. We deflect the molecu-lar beam using the radiation pressure force and measure an acceleration of 8.7(1.5) × 105 m s−2. Losses from the optical cycle due to vibrational branching to X 1Σ+, v″ = 1 are addressed efficiently with a single repump laser. Further, we investigate two other loss channels, parity mixing by stray electric fields and photo-ionisation. The upper bounds for these effects are sufficiently low to allow loading into a magneto‐optical trap.
We demonstrate a cryogenic buffer gas-cooled molecular beam source capable of producing bright, continuous beams of cold and slow free radicals via laser ablation over durations of up to 60 seconds. The source design uses a closed liquid helium reservoir as a large thermal mass to minimize heating and ensure reproducible beam properties during operation. Under typical conditions, the source produces beams of our test species SrF, containing $5\ifmmode\times\else\texttimes\fi{}{10}^{12}$ molecules per steradian per second in the $X{\phantom{\rule{0.16em}{0ex}}}^{2}\mathrm{\ensuremath{\Sigma}}(v=0,N=1)$ state with a rotational temperature of 1.0(2) K and a forward velocity of 140m/s140\phantom{\rule{0.28em}{0ex}}\mathrm{m}/\mathrm{s}140m/s. The beam properties are robust and unchanged for multiple cell exit geometries, but depend critically on the helium buffer gas flow rate, which must be $\ensuremath{\ge}10$ standard cubic centimeters per minute to produce bright, continuous beams of molecules for an ablation repetition rate of 55 Hz.
A supersonic beam source for SrF and BaF molecules is constructed by combining the expansion of carrier gas (a mixture of 2% SF6 and 98% argon) from an Even–Lavie valve with laser ablation of a barium/strontium metal target at a repetition rate of 10 Hz. Molecular beams with a narrow translational velocity spread are produced at relative values of Δv/v = 0.053(11) and 0.054(9) for SrF and BaF, respectively. The relative velocity spread of the beams produced in our source is lower in comparison with the results from other metal fluoride beams produced in supersonic laser ablation sources. The rotational temperature of BaF is measured to be 3.5 K. The source produces 6 × 108 and 107 molecules per steradian per pulse in the X2Σ+ (ν = 0, N = 1) state of BaF and SrF molecules, respectively, a state amenable to Stark deceleration and laser cooling.
We realize a continuous, intense, cold molecular and atomic beam source based on buffer-gas cooling. Hot vapor (up to 600 K) from an oven is mixed with cold (15 K) neon buffer gas, and then emitted into a high-flux beam. The novel use of cold neon as a buffer gas produces a forward velocity distribution and low-energy tail that is comparable to much colder helium-based sources. We expect this source to be trivially generalizable to a very wide range of atomic and molecular species with significant vapor pressure below 1000 K. The source has properties that make it a good starting point for laser cooling of molecules or atoms, cold collision studies, trapping, or nonlinear optics in buffer-gas-cooled atomic or molecular gases. A continuous guided beam of cold deuterated ammonia with a flux of 3 × 10 11 ND 3 molecules s −1 and a continuous free-space beam of cold potassium with a flux of 1 × 10 16 K atoms s −1 are realized.