Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2604.03629

Spectral-Domain Coherent Control of Broadband Raman Coupling in Atom Interferometry

Shengzhe Wang, Weichen Jia, Yue Xin, Qian-Lan Cai, Yingpeng Zhao, Yan-Ying Feng

Published Apr 4, 2026• 1 citation
arXivHTMLPDF

Abstract

The performance of atom interferometers is commonly limited by the finite spectral acceptance of atomic beam splitters and mirrors, which restricts efficient coupling to atoms with large Doppler shifts and reduces the usable atomic flux. Here, we demonstrate spectral-domain coherent control of Raman coupling by engineering its effective two-photon spectrum. By synthesizing multiple frequency components, the Raman interaction simultaneously addresses a broad range of atomic velocities, effectively overcoming the conventional transit-time-limited linewidth. Implemented in a continuous atomic-beam Mach-Zehnder interferometer, where the transverse Doppler broadening is 17 times larger than the intrinsic Raman linewidth, this approach enhances the fringe contrast from 5.9(2)% to 15.1(2)%, indicating a substantial increase in effective atomic participation. Our results establish spectral-domain coherent control as a general strategy for achieving spectrally robust atom interferometry and open new opportunities for quantum sensing in systems with strong inhomogeneous broadening.

DOI
10.48550/arxiv.2604.03629

Related papers

Atom Optics for Multidimensional Raman Interferometry

Yingpeng Zhao, Yiyang Shao, Wenjian Tong +7 more

The coherent control of atomic wave packets in multiple momentum dimensions is a central challenge in Raman atom optics and a key requirement for multidimensional atom interferometry. In this paper, a momentum-basis theoretical framework is developed for two-dimensional Raman interactions. We formulate the atom-laser interaction for two-dimensional Raman beams and obtain the effective two-level ground-state Hamiltonian after adiabatic elimination of the excited states. The resulted Hamiltonian is constructed on the reachable momentum-state lattice and includes AC Stark shifts, intra-dimensional Raman couplings, and cross-dimensional Raman coupling terms, thereby describing multidimensional Raman dynamics beyond a simple superposition of independent single-dimensional models. The framework is used to analyze the principles and operating conditions of two-dimensional atom interferometry. Cross-dimensional Raman coupling and sequential reverse Raman transitions are identified as the main mechanisms that redistribute atoms into non-target momentum states and reduce the contrast of atomic interferometer fringe. Experimentally, Ramsey fringes are observed in a cold-atom fountain interferometer, with a contrast of $14.8\%$ at an interrogation time of $T=10~{\rm ms}$, in good agreement with the theoretical calculation. The conditions required for velocity-sensitive multidimensional atom interferometry are further clarified, including detuning control, velocity-class selection, and suppression of undesired inter-dimensional transitions. This work provides a theoretical and experimental basis for multidimensional Raman atom interferometry.

arXiv:2606.15215•Jun 13, 2026•0 citations

Polychromatic atom optics for atom interferometry

Samuel Lellouch, Oliver Ennis, Ramiz Haditalab +2 more

Abstract Coherent manipulation of atoms with atom-optic light pulses is central to atom interferometry. Achieving high pulse efficiency is essential for enhancing fringe contrast and sensitivity, in particular for large-momentum transfer interferometers which use an increased number of pulses. We perform an investigation of optimizing the frequency domain of pulses by using tailored polychromatic light fields, and demonstrate the possibility to deliver high-efficiency and resilient atom-optic pulses even in the situation of inhomogeneous atomic clouds and laser beams. We find that this approach is able to operate over long interrogation times despite spontaneous emission and to achieve experimentally relevant pulse efficiencies for clouds up to $100~\mu \text{K}$ 100 μ K . This overcomes some of the most stringent barriers for large-momentum transfer and has the potential to reduce the complexity of atom interferometers. We show that polychromatic light pulses could enhance single-photon-based large-momentum transfer atom interferometry—achieving $850\,\hbar k$ 850 ħ k of momentum splitting with experimentally accessible parameters, which represents a significant improvement over the state-of-the art. The benefits of the method extend beyond atom interferometry and could enable groundbreaking advances in quantum state manipulation.

EPJ Quantum Technology•Mar 8, 2023•4 citations

Phase control in atomic coherence

Utsab Khadka

In this thesis, atomic coherence is used to enhance nonlinear optical processes in multi-level atoms. The multi-photon transitions are driven resonantly, and at the same time without absorptive losses, by using electromagnetically induced transparency (EIT), thereby allowing the study of χ(3) and χ(5) nonlinearities using weak driving fields. The coherently modified probe beam(s) and the atom-radiated signal fields arising from four- and six- wave- mixing (FWM and SWM) processes are measured in the spectral, temporal and spatial domains. In a three-level ladder-type atomic system, multiple peaks having spectral asymmetries are observed in the EIT window as well as in the FWM signal waveforms due to the diverse multiplicities of the participating atomic states. Using phase control tailored in the frequency domain, we demonstrate all-optical methods to control these spectral waveforms and discuss applications involving waveform-shaping and metrology. For the EIT study we demonstrate a switching of multiple dark peaks into bright peaks via phase-control of interferences in the underlying dark-states. In the FWM study we demonstrate all-optical spectral line shape symmetrization, linewidth narrowing and bandwidth switching. In a four-level inverted-Y-type atomic system, we drive and measure coexisting and phase-matched FWM and SWM signals. By using precision control of the relative phase and amplitude between these two processes of different nonlinear orders, we demonstrate phase coherence between them. First, a single-phase measurement is performed in the temporal and spatial domains, and the interferogram is used to measure the resonant frequency of the 5D5/2-5P3/2 atomic transition in 85Rb. Second, the method is extended to realize a capacity for two-phase measurement. In this case, the spectral bandwidth of the signal is modified in order to measure the phase-shift occurring in one Mach-Zehnder interferometer, while the intensity of the total signal waveform measures the phase-shift occurring in a second interferometer. Finally, we demonstrate phase-dependent spatial fusion between two ultra-weak optical fields by using a strong coupling field to first convert the weak fields into bosonic dark-state polaritons, which are then steered into a common all-optical waveguide mode arising due to the coupling field's intensity distribution and the resulting cross-Kerr refractive index gradient.

Journal of the Arkansas Academy of Science•Jan 1, 2012•0 citations

Optimal control of Raman pulse sequences for atom interferometry

Jack Saywell, Max Carey, Mohammad Belal +2 more

Abstract We present the theoretical design and experimental implementation of mirror and beamsplitter pulses that improve the fidelity of atom interferometry and increase its tolerance of systematic inhomogeneities. These pulses are designed using the GRAPE optimal control algorithm and demonstrated experimentally with a cold thermal sample of 85Rb atoms. We first show a stimulated Raman inversion pulse design that achieves a ground hyperfine state transfer efficiency of 99.8(3)%, compared with a conventional π pulse efficiency of 75(3)%. This inversion pulse is robust to variations in laser intensity and detuning, maintaining a transfer efficiency of 90% at detunings for which the π pulse fidelity is below 20%, and is thus suitable for large momentum transfer interferometers using thermal atoms or operating in non-ideal environments. We then extend our optimization to all components of a Mach–Zehnder atom interferometer sequence and show that with a highly inhomogeneous atomic sample the fringe visibility is increased threefold over that using conventional π and π/2 pulses.

arXiv:1911.08789•Journal of Physics B Atomic Molecular and Optical Physics•Feb 5, 2020•65 citations

Atom Interferometry with Floquet Atom Optics

Thomas F. Wilkason, Megan K. T. Nantel, Jan Rudolph +6 more

Floquet engineering offers a compelling approach for designing the time evolution of periodically driven systems. We implement a periodic atom-light coupling to realize Floquet atom optics on the strontium ^{1}S_{0}-^{3}P_{1} transition. These atom optics reach pulse efficiencies above 99.4% over a wide range of frequency offsets between light and atomic resonance, even under strong driving where this detuning is on the order of the Rabi frequency. Moreover, we use Floquet atom optics to compensate for differential Doppler shifts in large momentum transfer atom interferometers and achieve state-of-the-art momentum separation in excess of 400 ℏk. This technique can be applied to any two-level system at arbitrary coupling strength, with broad application in coherent quantum control.

arXiv:2205.06965•Physical Review Letters•Oct 24, 2022•57 citations

Optimal pulses for enhanced interferometer sensitivity and contrast

Jack Saywell, Max Carey, David Elcock +3 more

The mirrors and beamsplitters of atom interferometers often suffer from inhomogeneities in coupling strength and effective detuning because different atoms see different laser intensities, Zeeman and Doppler shifts and are in different Zeeman sub-states. This limits the fringe visibility for a simple interferometer, which falls off rapidly if extra mirrors are added, for example to increase the interferometer area. In practice, one usually therefore filters the atomic velocities/sub-states, thus losing signal, and/or restricting operation to small-area interferometers with low sensitivity. The problem is familiar in the field of NMR, where, instead of using simple pi or pi/2 pulses, the phase and potentially amplitude are modulated during the pulse so as to make the result robust to the inhomogeneities encountered. Despite the similarities with NMR systems, the numbers, correlations and performance measures for atom interferometry are different. We have used optimal control theory to obtain robust high fidelity mirror pulses for atom interferometry. Importantly, while the designs are found by computational simulation, we can validate them experimentally, with remarkably good agreement. We have addressed the optimization of individual mirror pulses, but the eventual aim is to optimize the interferometer as a whole: errors introduced in one pulse can be compensated at a later stage, for example. Our pulses yield high contrast without the need to filter the atomic sample and maintain this even in the case of extended pulse sequences, thus making it possible to achieve significantly larger interferometer areas than with simple pi pulses.

•Sep 20, 2018•0 citations
The performance of atom interferometers is commonly limited by the finite spectral acceptance of atomic beam splitters and mirrors, which restricts efficient coupling to atoms with large Doppler shifts and reduces the usable atomic flux. Here, we demonstrate spectral-domain coherent control of Raman coupling by engineering its effective two-photon spectrum. By synthesizing multiple frequency components, the Raman interaction simultaneously addresses a broad range of atomic velocities, effectively overcoming the conventional transit-time-limited linewidth. Implemented in a continuous atomic-beam Mach-Zehnder interferometer, where the transverse Doppler broadening is 17 times larger than the intrinsic Raman linewidth, this approach enhances the fringe contrast from 5.9(2)% to 15.1(2)%, indicating a substantial increase in effective atomic participation. Our results establish spectral-domain coherent control as a general strategy for achieving spectrally robust atom interferometry and open new opportunities for quantum sensing in systems with strong inhomogeneous broadening.
The coherent control of atomic wave packets in multiple momentum dimensions is a central challenge in Raman atom optics and a key requirement for multidimensional atom interferometry. In this paper, a momentum-basis theoretical framework is developed for two-dimensional Raman interactions. We formulate the atom-laser interaction for two-dimensional Raman beams and obtain the effective two-level ground-state Hamiltonian after adiabatic elimination of the excited states. The resulted Hamiltonian is constructed on the reachable momentum-state lattice and includes AC Stark shifts, intra-dimensional Raman couplings, and cross-dimensional Raman coupling terms, thereby describing multidimensional Raman dynamics beyond a simple superposition of independent single-dimensional models. The framework is used to analyze the principles and operating conditions of two-dimensional atom interferometry. Cross-dimensional Raman coupling and sequential reverse Raman transitions are identified as the main mechanisms that redistribute atoms into non-target momentum states and reduce the contrast of atomic interferometer fringe. Experimentally, Ramsey fringes are observed in a cold-atom fountain interferometer, with a contrast of 14.8%14.8\%14.8% at an interrogation time of T=10 msT=10~{\rm ms}T=10 ms, in good agreement with the theoretical calculation. The conditions required for velocity-sensitive multidimensional atom interferometry are further clarified, including detuning control, velocity-class selection, and suppression of undesired inter-dimensional transitions. This work provides a theoretical and experimental basis for multidimensional Raman atom interferometry.
Abstract Coherent manipulation of atoms with atom-optic light pulses is central to atom interferometry. Achieving high pulse efficiency is essential for enhancing fringe contrast and sensitivity, in particular for large-momentum transfer interferometers which use an increased number of pulses. We perform an investigation of optimizing the frequency domain of pulses by using tailored polychromatic light fields, and demonstrate the possibility to deliver high-efficiency and resilient atom-optic pulses even in the situation of inhomogeneous atomic clouds and laser beams. We find that this approach is able to operate over long interrogation times despite spontaneous emission and to achieve experimentally relevant pulse efficiencies for clouds up to 100 μK100~\mu \text{K}100 μK 100 μ K . This overcomes some of the most stringent barriers for large-momentum transfer and has the potential to reduce the complexity of atom interferometers. We show that polychromatic light pulses could enhance single-photon-based large-momentum transfer atom interferometry—achieving 850 ℏk850\,\hbar k850ℏk 850 ħ k of momentum splitting with experimentally accessible parameters, which represents a significant improvement over the state-of-the art. The benefits of the method extend beyond atom interferometry and could enable groundbreaking advances in quantum state manipulation.
In this thesis, atomic coherence is used to enhance nonlinear optical processes in multi-level atoms. The multi-photon transitions are driven resonantly, and at the same time without absorptive losses, by using electromagnetically induced transparency (EIT), thereby allowing the study of χ(3) and χ(5) nonlinearities using weak driving fields. The coherently modified probe beam(s) and the atom-radiated signal fields arising from four- and six- wave- mixing (FWM and SWM) processes are measured in the spectral, temporal and spatial domains. In a three-level ladder-type atomic system, multiple peaks having spectral asymmetries are observed in the EIT window as well as in the FWM signal waveforms due to the diverse multiplicities of the participating atomic states. Using phase control tailored in the frequency domain, we demonstrate all-optical methods to control these spectral waveforms and discuss applications involving waveform-shaping and metrology. For the EIT study we demonstrate a switching of multiple dark peaks into bright peaks via phase-control of interferences in the underlying dark-states. In the FWM study we demonstrate all-optical spectral line shape symmetrization, linewidth narrowing and bandwidth switching. In a four-level inverted-Y-type atomic system, we drive and measure coexisting and phase-matched FWM and SWM signals. By using precision control of the relative phase and amplitude between these two processes of different nonlinear orders, we demonstrate phase coherence between them. First, a single-phase measurement is performed in the temporal and spatial domains, and the interferogram is used to measure the resonant frequency of the 5D5/2-5P3/2 atomic transition in 85Rb. Second, the method is extended to realize a capacity for two-phase measurement. In this case, the spectral bandwidth of the signal is modified in order to measure the phase-shift occurring in one Mach-Zehnder interferometer, while the intensity of the total signal waveform measures the phase-shift occurring in a second interferometer. Finally, we demonstrate phase-dependent spatial fusion between two ultra-weak optical fields by using a strong coupling field to first convert the weak fields into bosonic dark-state polaritons, which are then steered into a common all-optical waveguide mode arising due to the coupling field's intensity distribution and the resulting cross-Kerr refractive index gradient.
Abstract We present the theoretical design and experimental implementation of mirror and beamsplitter pulses that improve the fidelity of atom interferometry and increase its tolerance of systematic inhomogeneities. These pulses are designed using the GRAPE optimal control algorithm and demonstrated experimentally with a cold thermal sample of 85Rb atoms. We first show a stimulated Raman inversion pulse design that achieves a ground hyperfine state transfer efficiency of 99.8(3)%, compared with a conventional π pulse efficiency of 75(3)%. This inversion pulse is robust to variations in laser intensity and detuning, maintaining a transfer efficiency of 90% at detunings for which the π pulse fidelity is below 20%, and is thus suitable for large momentum transfer interferometers using thermal atoms or operating in non-ideal environments. We then extend our optimization to all components of a Mach–Zehnder atom interferometer sequence and show that with a highly inhomogeneous atomic sample the fringe visibility is increased threefold over that using conventional π and π/2 pulses.
Floquet engineering offers a compelling approach for designing the time evolution of periodically driven systems. We implement a periodic atom-light coupling to realize Floquet atom optics on the strontium ^{1}S_{0}-^{3}P_{1} transition. These atom optics reach pulse efficiencies above 99.4% over a wide range of frequency offsets between light and atomic resonance, even under strong driving where this detuning is on the order of the Rabi frequency. Moreover, we use Floquet atom optics to compensate for differential Doppler shifts in large momentum transfer atom interferometers and achieve state-of-the-art momentum separation in excess of 400 ℏk. This technique can be applied to any two-level system at arbitrary coupling strength, with broad application in coherent quantum control.
The mirrors and beamsplitters of atom interferometers often suffer from inhomogeneities in coupling strength and effective detuning because different atoms see different laser intensities, Zeeman and Doppler shifts and are in different Zeeman sub-states. This limits the fringe visibility for a simple interferometer, which falls off rapidly if extra mirrors are added, for example to increase the interferometer area. In practice, one usually therefore filters the atomic velocities/sub-states, thus losing signal, and/or restricting operation to small-area interferometers with low sensitivity. The problem is familiar in the field of NMR, where, instead of using simple pi or pi/2 pulses, the phase and potentially amplitude are modulated during the pulse so as to make the result robust to the inhomogeneities encountered. Despite the similarities with NMR systems, the numbers, correlations and performance measures for atom interferometry are different. We have used optimal control theory to obtain robust high fidelity mirror pulses for atom interferometry. Importantly, while the designs are found by computational simulation, we can validate them experimentally, with remarkably good agreement. We have addressed the optimization of individual mirror pulses, but the eventual aim is to optimize the interferometer as a whole: errors introduced in one pulse can be compensated at a later stage, for example. Our pulses yield high contrast without the need to filter the atomic sample and maintain this even in the case of extended pulse sequences, thus making it possible to achieve significantly larger interferometer areas than with simple pi pulses.