Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.27231

Ultralow-power coherent qubit control using AQFP logic at millikelvin temperatures

Hiroto Mukai, Akiyoshi Tomonaga, Rui Wang, Yu Zhou, Taro Yamashita, Nobuyuki Yoshikawa, Jaw-Shen Tsai, Naoki Takeuchi

quant-phSubmitted Mar 28, 2026• Announced Mar 31, 2026• 2 citations
arXivHTMLPDF

Abstract

Qubit controllers are essential for scaling superconducting quantum processors, but implementing them at the 10 mK stage of a dilution refrigerator remains challenging due to stringent cooling constraints. Here we report an ultralow-power qubit controller using adiabatic quantum-flux-parametron (AQFP) logic, termed an AQFP-multiplexed qubit controller with virtual Z gates (AQFP QC-VZ). The AQFP QC-VZ generates multi-tone microwave pulses for qubit control with an ultralow power dissipation of 111 pW per qubit. By combining microwave and time-division multiplexing, the AQFP QC-VZ enables parallel application of X and virtual Z gates to multiple qubits using only a few control lines from room temperature. We demonstrate coherent single-qubit gates at the 10 mK stage using an AQFP mixer, a core component of the AQFP QC-VZ, without observable degradation in coherence.

Comments
11 pages, 5 figures

Related papers

Microwave-multiplexed qubit controller using adiabatic superconductor logic

Naoki Takeuchi, Taiki Yamae, Taro Yamashita +2 more

Abstract Cryogenic qubit controllers (QCs) are the key to build large-scale superconducting quantum processors. However, developing scalable QCs is challenging because the cooling power of a dilution refrigerator is too small (~10 μW at ~10 mK) to operate conventional logic families, such as complementary metal-oxide-semiconductor logic and superconducting single-flux-quantum logic, near qubits. Here we report on a scalable QC using an ultra-low-power superconductor logic family, namely adiabatic quantum-flux-parametron (AQFP) logic. The AQFP-based QC, referred to as the AQFP-multiplexed QC (AQFP-mux QC), produces multi-tone microwave signals for qubit control with an extremely small power dissipation of 81.8 pW per qubit. Furthermore, the AQFP-mux QC adopts microwave multiplexing to reduce the number of coaxial cables for operating the entire system. As a proof of concept, we demonstrate an AQFP-mux QC chip that produces microwave signals at two output ports through microwave multiplexing and demultiplexing. Experimental results show an output power of approximately −80 dBm and on/off ratio of ~40 dB at each output port. Basic mixing operation is also demonstrated by observing sideband signals.

arXiv:2310.06544•npj Quantum Information•Jun 3, 2024•37 citations

Scalable flux controllers using adiabatic superconductor logic for quantum processors

Naoki Takeuchi, Taiki Yamae, Wenhui Luo +3 more

Quantum processors have the potential to accelerate specific computing tasks but are difficult to scale up due to engineering limitations, such as the number of available cables and cooling power for dilution refrigerators for quantum bits (qubits). Hence, it is very important to develop scalable, energy-efficient interface circuits that can control many qubits via a few control lines inside a dilution refrigerator. One of the most important interface circuits is the flux controller (FC), which generates arbitrary dc flux bias to adjust the characteristics of component devices such as qubits. In this paper, we propose and demonstrate FCs using an energy-efficient superconductor logic family, adiabatic quantum-flux-parametron (AQFP) logic. We develop two types of FCs: the AQFP FC and the AQFP/single-flux-quantum (AQFP/SFQ) FC. Both FCs require only a few control lines and have extremely small power dissipation, thus exhibiting high scalability. Furthermore, the AQFP/SFQ FC can control flux bias using ballistic SFQ transmission, which is crucial for integration with qubits. As a proof of concept, we demonstrate AQFP and AQFP/SFQ FCs at 4.2 K, fabricated by the AIST high-speed standard process. Our results indicate that AQFP logic is highly suitable for use as qubit interface circuits for very large-scale quantum processors, especially from the viewpoint of the control line count, power dissipation, and amount of supply currents.

Physical Review Research•Feb 27, 2023•21 citations

Integrated digital system solution for superconducting quantum computing based on mK-generated single flux quantum pulse patterns for multi-qubit control

Thomas Ortlepp, Anna Reinhardt, Taghrid Haddad +1 more

Quantum technologies are today regarded as one of the key technologies with huge implications to technological, economic and social developments in the next decades. Among the different platforms, superconducting implementations represent one of the most promising and are therefore pursued by several research institutions but also by numerous high-tech companies. Current research focusses e.g. on scaling towards a large number of qubits needed for practical implementations of this technology. Amongst the various realizations, adiabatic quantum flux parametron (AQFP) circuits have shown lowest power dissipation reaching Landauer limit. The operation of AQFP circuits down to mK temperature has been recently demonstrated. We will present a new concept for a digital control circuit based on the microwave pulse patters generated by single flux quantum circuits operating at mK temperatures. We discuss the circuit operation and the integration together with superconducting qubits to a compact and scalable approach for multi-Qubit control by digital pulse patterns.

Quantum Computing, Communication, and Simulation•Mar 5, 2026•0 citations

Superconductor modulation circuits for Qubit control at microwave frequencies

Sasan Razmkhah, Ali Bozbey, Pascal Febvre

Readout and control of qubits are limiting factors in scaling quantum computers. An ideal solution is to integrate energy-efficient cryogenic circuits close to the qubits to perform control and pre-processing tasks. With orders of magnitude lower power consumption and hence lower noise, Single Flux Quantum (SFQ) and Adiabatic Quantum Flux Parametron (AQFP) superconductor logic families can reach ultimate performance at cryogenic temperatures. We have created a superconductor-based on-chip function generator to control qubits. The generated signal is modulated up to tens of GHz based on the external input waveform applied to the superconductor mixer stage. This circuit works at 4.2K. A radiofrequency (RF) matching circuit transmits the signal to the ~mK stage after digital amplification and noise reduction.

arXiv:2211.06667•Nov 12, 2022•5 citations

Scalable Quantum Computing System with Integrated Millikelvin Cryogenic Electronics

Caleb Jordan, Aaron Somoroff, L. Palma +1 more

Current superconducting quantum computers (QC) rely on a brute-force scaling approach where quantum chips operating at the millikelvin stage inside dilution refrigerators are connected to room-temperature electronics via an ever-increasing number of signal wires. In order to drastically scale up such systems without facing refrigeration challenges, these quantum interface electronics need to be integrated at cryogenic temperatures, ideally at the same stage as qubits. In this paper, we show that, by employing energy-efficient digital superconducting microchips based on single flux quantum (SFQ) technology, all essential functions to operate a full stack quantum computer can be integrated at 10 mK. They include digital qubit charge control and magnetic flux control for single- and two-qubit gates, as well as digital qubit readout.

Technical digest - International Electron Devices Meeting/Technical digest•Dec 6, 2025•0 citations

A Control Line Multiplexing Framework for Scalable Quantum Computing

Dayu Li, Naibin Zhou, Zhiyuan Chen +39 more

Universal fault-tolerant superconducting quantum computers are expected to require millions of physical qubits; yet extending the prevailing dedicated-control-line paradigm to this scale would exceed the wiring density and cooling-power budget of dilution refrigerators. Microwave frequency-division multiplexing (FDM) revolutionized classical communications by enabling many independent channels to share common transmission infrastructure. Translating this principle to superconducting quantum control, however, requires an all-microwave architecture and experimental validation of frequency-multiplexed gate control. Recent work in quantum error correction has demonstrated microwave-based readout, single-qubit gates and leakage suppression, whereas two-qubit gates remain predominantly driven by unipolar pulses and thus constitute the missing element of an all-microwave architecture. Here, we propose a periodically extensible hybrid multiplexing framework in which all gate operations are frequency-division multiplexed using polychromatic microwave pulses and band-pass filters, thereby reducing the required control-line count by one to two orders of magnitude. In a 1:4 demonstration, we achieve average errors of $(6.4\pm0.2)\times10^{-3}$ for parallel FDM CZ gates and $(10.6\pm0.2)\times10^{-4}$ for parallel FDM $XY(π/2)$ gates, without statistically significant multiplexing-induced degradation. Together with on-chip DC sources, this FDM-based gate-control scheme completes the last missing module in a scalable multiplexed-control architecture toward universal fault-tolerant quantum computing.

quant-pharXiv:2610.35227•Oct 27, 2026•0 citations
Qubit controllers are essential for scaling superconducting quantum processors, but implementing them at the 10 mK stage of a dilution refrigerator remains challenging due to stringent cooling constraints. Here we report an ultralow-power qubit controller using adiabatic quantum-flux-parametron (AQFP) logic, termed an AQFP-multiplexed qubit controller with virtual Z gates (AQFP QC-VZ). The AQFP QC-VZ generates multi-tone microwave pulses for qubit control with an ultralow power dissipation of 111 pW per qubit. By combining microwave and time-division multiplexing, the AQFP QC-VZ enables parallel application of X and virtual Z gates to multiple qubits using only a few control lines from room temperature. We demonstrate coherent single-qubit gates at the 10 mK stage using an AQFP mixer, a core component of the AQFP QC-VZ, without observable degradation in coherence.
Abstract Cryogenic qubit controllers (QCs) are the key to build large-scale superconducting quantum processors. However, developing scalable QCs is challenging because the cooling power of a dilution refrigerator is too small (~10 μW at ~10 mK) to operate conventional logic families, such as complementary metal-oxide-semiconductor logic and superconducting single-flux-quantum logic, near qubits. Here we report on a scalable QC using an ultra-low-power superconductor logic family, namely adiabatic quantum-flux-parametron (AQFP) logic. The AQFP-based QC, referred to as the AQFP-multiplexed QC (AQFP-mux QC), produces multi-tone microwave signals for qubit control with an extremely small power dissipation of 81.8 pW per qubit. Furthermore, the AQFP-mux QC adopts microwave multiplexing to reduce the number of coaxial cables for operating the entire system. As a proof of concept, we demonstrate an AQFP-mux QC chip that produces microwave signals at two output ports through microwave multiplexing and demultiplexing. Experimental results show an output power of approximately −80 dBm and on/off ratio of ~40 dB at each output port. Basic mixing operation is also demonstrated by observing sideband signals.
Quantum processors have the potential to accelerate specific computing tasks but are difficult to scale up due to engineering limitations, such as the number of available cables and cooling power for dilution refrigerators for quantum bits (qubits). Hence, it is very important to develop scalable, energy-efficient interface circuits that can control many qubits via a few control lines inside a dilution refrigerator. One of the most important interface circuits is the flux controller (FC), which generates arbitrary dc flux bias to adjust the characteristics of component devices such as qubits. In this paper, we propose and demonstrate FCs using an energy-efficient superconductor logic family, adiabatic quantum-flux-parametron (AQFP) logic. We develop two types of FCs: the AQFP FC and the AQFP/single-flux-quantum (AQFP/SFQ) FC. Both FCs require only a few control lines and have extremely small power dissipation, thus exhibiting high scalability. Furthermore, the AQFP/SFQ FC can control flux bias using ballistic SFQ transmission, which is crucial for integration with qubits. As a proof of concept, we demonstrate AQFP and AQFP/SFQ FCs at 4.2 K, fabricated by the AIST high-speed standard process. Our results indicate that AQFP logic is highly suitable for use as qubit interface circuits for very large-scale quantum processors, especially from the viewpoint of the control line count, power dissipation, and amount of supply currents.
Quantum technologies are today regarded as one of the key technologies with huge implications to technological, economic and social developments in the next decades. Among the different platforms, superconducting implementations represent one of the most promising and are therefore pursued by several research institutions but also by numerous high-tech companies. Current research focusses e.g. on scaling towards a large number of qubits needed for practical implementations of this technology. Amongst the various realizations, adiabatic quantum flux parametron (AQFP) circuits have shown lowest power dissipation reaching Landauer limit. The operation of AQFP circuits down to mK temperature has been recently demonstrated. We will present a new concept for a digital control circuit based on the microwave pulse patters generated by single flux quantum circuits operating at mK temperatures. We discuss the circuit operation and the integration together with superconducting qubits to a compact and scalable approach for multi-Qubit control by digital pulse patterns.
Readout and control of qubits are limiting factors in scaling quantum computers. An ideal solution is to integrate energy-efficient cryogenic circuits close to the qubits to perform control and pre-processing tasks. With orders of magnitude lower power consumption and hence lower noise, Single Flux Quantum (SFQ) and Adiabatic Quantum Flux Parametron (AQFP) superconductor logic families can reach ultimate performance at cryogenic temperatures. We have created a superconductor-based on-chip function generator to control qubits. The generated signal is modulated up to tens of GHz based on the external input waveform applied to the superconductor mixer stage. This circuit works at 4.2K. A radiofrequency (RF) matching circuit transmits the signal to the ~mK stage after digital amplification and noise reduction.
Current superconducting quantum computers (QC) rely on a brute-force scaling approach where quantum chips operating at the millikelvin stage inside dilution refrigerators are connected to room-temperature electronics via an ever-increasing number of signal wires. In order to drastically scale up such systems without facing refrigeration challenges, these quantum interface electronics need to be integrated at cryogenic temperatures, ideally at the same stage as qubits. In this paper, we show that, by employing energy-efficient digital superconducting microchips based on single flux quantum (SFQ) technology, all essential functions to operate a full stack quantum computer can be integrated at 10 mK. They include digital qubit charge control and magnetic flux control for single- and two-qubit gates, as well as digital qubit readout.
Universal fault-tolerant superconducting quantum computers are expected to require millions of physical qubits; yet extending the prevailing dedicated-control-line paradigm to this scale would exceed the wiring density and cooling-power budget of dilution refrigerators. Microwave frequency-division multiplexing (FDM) revolutionized classical communications by enabling many independent channels to share common transmission infrastructure. Translating this principle to superconducting quantum control, however, requires an all-microwave architecture and experimental validation of frequency-multiplexed gate control. Recent work in quantum error correction has demonstrated microwave-based readout, single-qubit gates and leakage suppression, whereas two-qubit gates remain predominantly driven by unipolar pulses and thus constitute the missing element of an all-microwave architecture. Here, we propose a periodically extensible hybrid multiplexing framework in which all gate operations are frequency-division multiplexed using polychromatic microwave pulses and band-pass filters, thereby reducing the required control-line count by one to two orders of magnitude. In a 1:4 demonstration, we achieve average errors of (6.4±0.2)×10−3(6.4\pm0.2)\times10^{-3}(6.4±0.2)×10−3 for parallel FDM CZ gates and (10.6±0.2)×10−4(10.6\pm0.2)\times10^{-4}(10.6±0.2)×10−4 for parallel FDM XY(π/2)XY(π/2)XY(π/2) gates, without statistically significant multiplexing-induced degradation. Together with on-chip DC sources, this FDM-based gate-control scheme completes the last missing module in a scalable multiplexed-control architecture toward universal fault-tolerant quantum computing.