Trapped-ion Quantum Charge-Coupled Device (QCCD) architectures promise scalability through interconnected trap zones and dynamic ion transport; however, this transport capability creates a complex compilation challenge: how to move qubits efficiently without degrading fidelity. We introduce a routing strategy that turns this challenge into an advantage by exploiting operational parallelism across traps while adapting to both algorithmic structure and device topology through a configurable multi-parameter scoring mechanism. Across a broad suite of benchmarks and QCCD layouts, the method consistently reduces ion-transport overhead and improves execution fidelity, outperforming state-of-the-art routing techniques. These results highlight that explicitly balancing movement overhead and execution parallelism under architectural constraints is key to unlocking the full potential of modular trapped-ion quantum processors.
Trapped-ion Quantum Charge-Coupled Device (QCCD) architectures promise scalability through interconnected trap zones and dynamic ion transport; however, this transport capability creates a complex compilation challenge: how to move qubits efficiently without degrading fidelity. We introduce a routing strategy that turns this challenge into an advantage by exploiting operational parallelism across traps while adapting to both algorithmic structure and device topology through a configurable multi-parameter scoring mechanism. Across a broad suite of benchmarks and QCCD layouts, the method consistently reduces ion-transport overhead and improves execution fidelity, outperforming state-of-the-art routing techniques. These results highlight that explicitly balancing movement overhead and execution parallelism under architectural constraints is key to unlocking the full potential of modular trapped-ion quantum processors.
Ion-trapped Quantum Charge-Coupled Device (QCCD) architectures have emerged as a promising alternative to scale single-trap devices by interconnecting multiple traps through ion shuttling, enabling the execution of parallel operations across different traps. While this parallelism enhances computational throughput, it introduces additional operations, raising the following question: do the benefits of parallelism outweigh the potential loss of fidelity due to increased ion movements?This paper answers this question by exploring the trade-off between the parallelism of operations and fidelity loss due to movement overhead, comparing sequential execution in single-trap devices with parallel execution in QCCD architectures. We first analyze the fidelity impact of both methods, establishing the optimal number of ion movements for the worst-case scenario. Next, we evaluate several quantum algorithms on QCCD architectures by exploiting parallelism through ion distribution across multiple traps. This analysis identifies the algorithms that benefit the most from parallel executions, explores the underlying reasons, and determines the optimal balance between movement overhead and fidelity loss for each algorithm.
Trapped-ion quantum computers are a promising platform, offering high-quality qubits with long coherence times and high-fidelity gate operations. The Quantum Charge Coupled Device (QCCD) architecture provides a scalable blueprint by leveraging the ability to shuttle ions between distinct zones. However, realizing such architectures in practice requires software support to manage ion movement across multi-zone layouts. In this work, we propose a compilation strategy for QCCD architectures with multiple processing zones located outside a grid-type memory zone. Unlike previous approaches that treat processing zones as black-boxes, our method explicitly models their structural constraints, enabling optimized ion movement to and through them. It combines qubit partitioning with dependency-aware gate selection to reduce inter-zone shuttling while enabling simultaneous gate execution. We implemented the method in an open-source tool and empirically demonstrated its effectiveness across several QCCD layouts, laying a foundation for the compilation of multi-zone trapped-ion systems.
Ion trap technologies have earned significant attention as potential candidates for quantum information processing due to their long decoherence times and precise manipulation of individual qubits, distinguishing them from other candidates in the field of quantum technologies. However, scalability remains a challenge, as introducing additional qubits into a trap increases noise and heating effects, consequently decreasing operational fidelity. Trapped-ion Quantum Charge-Coupled Device (QCCD) architectures have addressed this limitation by interconnecting multiple traps and employing ion shuttling mechanisms to transfer ions among traps. This new architectural design requires the development of novel compilation techniques for quantum algorithms, which efficiently allocate and route qubits, and schedule operations. The aim of a compiler is to minimize ion movements and, therefore, reduce the execution time of the circuit to achieve a higher fidelity. In this paper, we propose a novel approach for initial qubit placement, demonstrating enhancements of up to 50% compared to prior methods. Furthermore, we conduct a scalability analysis on two distinct QCCD topologies: a 1D-linear array and a ring structure. Additionally, we evaluate the impact of the excess capacity - i.e. the number of free spaces within a trap - on the algorithm performance.
Scalable qubit mapping and routing remain major bottlenecks in quantum compilation, especially for Trapped-Ion Quantum Charge-Coupled device (TI-QCCD) architectures, where qubit interactions require physically shuttling ions under strict movement, congestion, and trap-capacity constraints. We present a compilation framework built around the position graph abstraction, a unified representation of executable locations, movement paths, and routing constraints that enables heuristic mappers to operate directly on shuttling-based hardware. Using this abstraction, we accelerate the SWAP-based BidiREctional heuristic search (SABRE) by implementing relative move scoring, which caches repeated heuristic move evaluations that arise during search, and memoized congestion resolution, which speeds up the resolution of repeated congestion. This optimization removes redundant computation without changing routing/shuttling decisions, improving the scalability of SABRE-based methods on TI-QCCD systems. Our results show that combining an architecture-aware abstraction with memoized heuristic evaluation yields a practical and effective path toward scalable qubit mapping and routing across heterogeneous quantum architectures.
Trapped-ion quantum computers offer high-fidelity operations, long coherence times, and all-to-all connectivity within a single trap. However, scaling to large circuits is limited by the trap's ion capacity. The QCCD architecture addresses this by enabling ion shuttling across multiple traps, but excessive shuttling increases execution time and degrades fidelity. This paper presents an improved ion-shuttling approach targeting linear QCCD architectures. Building on a state-of-the-art approach [27] for linear trapped-ion devices, our approach introduces a front-layer-based scheduling method that dynamically prioritizes executable gates, along with a novel destination trap selection method for ion-shuttling, effectively reducing unnecessary ion movements. We also present a look-ahead gate selection strategy based on the gate dependency graph, avoiding the high runtime of the gate proximity approach used in the state-of-the-art approach, especially in circuits with all-to-all communication. Our approach achieves up to a 37.67% reduction in shuttle count and up to a 74.91% reduction in compilation time compared to the state-of-the-art approach for linear trapped-ion devices on actual NISQ benchmarks and synthetic circuits. On average, our approach achieves a 16.44% reduction in shuttle count and a 30.77% reduction in compilation time across all test cases. These improvements highlight the effectiveness of our approach, particularly for actual circuits.
The rapid expansion of quantum cloud services has led to long job queues due to single-tenant execution models that underutilize hardware resources. Quantum multi-programming (QMP) mitigates this by executing multiple circuits in parallel on a single device, but existing methods target superconducting systems with limited connectivity, high crosstalk, and lower gate fidelity. Trapped-ion architectures, with all-to-all connectivity, long coherence times, and high-fidelity mid-circuit measurement properties, presents itself as a more suitable platform for scalable QMP. We present CircPack, a hardware-aware circuit packing framework designed for modular trapped-ion devices based on the Quantum Charge-Coupled Device (QCCD) architecture. CircPack formulates static circuit scheduling as a two-dimensional packing problem with hardware-specific shuttling constraints. Compared to superconducting-based QMP approaches, CircPack achieves up to 70.72% better fidelity, 62.67% higher utilization, and 32.80% improved layer reduction. This framework is also capable of scalable, balanced scheduling across a cluster of independent QCCD modules, highlighting trapped-ion systems' potential in improving the throughput of quantum cloud computing in the near future.