Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.18780

Comparing optical-microwave conversion and all-microwave control schemes for a transmon qubit

Volodymyr Monarkha, Massimo Borrelli, Reza Hajitashakkori Kenari, Mohammad Kobba, Eugenio Cataldo, Beer de Zoeten, Mahnaz Zarrinfar, Kamal Pandey, Abhinand Pusuluri, Filippo D. Michelacci, Eliot Jouan, Bennett Sprague, Simon Groeblacher, Thierry C. van Thiel, Robert Stockill, Russell E. Lake

quant-phphysics.app-phSubmitted Mar 19, 2026• Announced Mar 20, 2026• 0 citations
arXivHTMLPDF

Abstract

We report a comparative study on transmon qubit control using (i) conventional attenuated coaxial microwave line and (ii) an optical control system using modulated laser light delivered over telecommunications optical fiber to a photodiode located at the 1K stage of a dilution cryostat. During each experiment, we performed repeated measurements of the energy relaxation and coherence times of a transmon qubit using one of the control signal delivery methods. Each measurement run spanned 20 hours of measurement time and from these datasets we observe no measurable effect on coherence of the qubit compared to random coherence fluctuations. Our results open up the possibility of large scale integration of the optical qubit control system.

Comments
6 pages, 3 figures

Related papers

Equivalence of flexible stripline and coaxial cables for superconducting qubit control and readout pulses

V. Yu. Monarkha, Slawomir Simbierowicz, Massimo Borrelli +11 more

We report a comparative study on microwave control lines for a transmon qubit using (i) flexible stripline transmission lines and (ii) semi-rigid coaxial cables. During each experiment, we performed repeated measurements of the energy relaxation and coherence times of a transmon qubit using one of the wiring configurations. Each measurement run spanned 70–250 h of the measurement time, and four separate cooldowns were performed so that each configuration could be tested twice. From these datasets, we observe that changing the microwave control lines from coaxial cables to flexible stripline transmission lines does not have a measurable effect on coherence compared to thermal cycling the system or random coherence fluctuations. Our results open up the possibility of large-scale integration of qubit control lines with integrated component with planar layouts on flexible substrate.

arXiv:2405.09211•Applied Physics Letters•May 27, 2024•11 citations

High fidelity control of superconducting qubits with optical transmitted signal

Yu-Huai Li, Daojin Fan, Na Li +15 more

Superconducting circuits exhibit remarkable potential for constructing large-scale quantum simulation and computation systems, featuring numerous qubits, extended coherence time, and precise control. Nevertheless, the growing number of signal cables poses a challenge in dilution refrigerators due to space and heat load constraints. To overcome this issue, we experimentally implemented an optically-assisted transmission line as an alternative to coaxial cables. By modulating microwave signals on laser intensities at room temperature and regenerating the signals at a cryogenic plate within the dilution refrigerator, we demonstrated full control of superconducting qubits using photocurrent. We demonstrate and benchmark both single-qubit and two-qubit gates on frequency tunable transmon qubits, achieving fidelities of 99.915% $\pm$ 0.005% and 99.676% $\pm$ 0.041%, respectively, which have reached the requirement of the surface code.

quant-pharXiv:2608.19602•Physical Review A•Aug 21, 2026•0 citations

All-optical control and multiplexed readout of multiple superconducting qubits

Xiaoxuan Pan, Chuanlong Ma, Jia-Qi Wang +12 more

Superconducting quantum circuits operate at millikelvin temperatures, typically requiring independent microwave cables for each qubit for connecting room-temperature control and readout electronics. However, scaling to large-scale processors hosting hundreds of qubits faces a severe input/output (I/O) bottleneck, as the dense cable arrays impose prohibitive constraints on physical footprint, thermal load, wiring complexity, and cost. Here we demonstrate a complete optical I/O architecture for superconducting quantum circuits, in which all control and readout signals are transmitted exclusively via optical photons. Employing a broadband traveling-wave Brillouin microwave-to-optical transducer, we achieve simultaneous frequency-multiplexed optical readout of two qubits. Combined with fiber-integrated photodiode arrays for control signal delivery, this closed-loop optical I/O introduces no measurable degradation to qubit coherence times, with an optically driven single-qubit gate fidelity showing only a 0.19% reduction relative to standard microwave operation. These results establish optical interconnects as a viable path toward large-scale superconducting quantum processors, and open the possibility of networking multiple superconducting quantum computers housed in separate dilution refrigerators through a centralized room-temperature control infrastructure.

quant-pharXiv:2512.21199•Dec 25, 2025•4 citations

Universal two-qubit control across dilution refrigerators via a 10-km coherent optical link

Chuanlong Ma, Jiajun Chen, Jia-Qi Wang +13 more

Distributed quantum networks are important for scalable quantum processors and for potential applications in communication, distributed computation, and sensing, in which direct classical links for adaptive control are essential to harness the shared entanglement. However, controlling superconducting quantum processors from a separate refrigerator over long distances remains elusive. Here, we introduce a coherent optical link (COL) that delivers microwave waveforms and their phase references between dilution refrigerators. Combining a laser, a microwave-to-optical transducer and an optical-to-microwave photodiode, the COL transmits microwave control signals over 10~km of fiber, while optical references derived from the same laser compensate for the frequency mismatch between devices. Through the COL, we deliver a universal gate set to a transmon qubit and a cavity qubit in another refrigerator and entangle them, and achieve a Bell-state fidelity of 80.6\%. Quantum control delivered through the COL thus provides a classical backbone for modular quantum processors.

arXiv:2611.12481•Nov 9, 2026•0 citations

Optical transmission of microwave control signal towards large-scale superconducting quantum computing

Na Li, Yu-Huai Li, Dao-Jin Fan +9 more

With the rapid development of superconducting quantum computing and the implementation of surface code, large-scale quantum computing is emerging as an urgent demand. In a superconducting computing system, the qubit is maintained in a cryogenic environment to avoid thermal excitation. Thus, the transmission of control signals, which are generated at room temperature, is needed. Typically, the transmission of these signals to the qubit relies on a coaxial cable wiring approach. However, in a large-scale computing system with hundreds or even thousands of qubits, the coaxial cables will pose great space and heat load to the dilution refrigerator. Here, to tackle this problem, we propose and demonstrate a direct-modulation-based optical transmission line. In our experiment, the average single-qubit XEB error and control error are measured as 0.139% and 0.014% separately, demonstrating the feasibility of the optical wiring approach and paving the way for large-scale superconducting quantum computing.

Optics Express•Jan 9, 2024•12 citations

Coherence-limited digital control of a superconducting qubit using a Josephson pulse generator at 3 K

M. A. Castellanos-Beltran, A. J. Sirois, L. Howe +4 more

Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime $T_1$, coherence time $T_2^*$ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for $T_1$ and $T_2^*$, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of $0.46$% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.

quant-pharXiv:2512.07962•Applied Physics Letters•Dec 10, 2025•13 citations
We report a comparative study on transmon qubit control using (i) conventional attenuated coaxial microwave line and (ii) an optical control system using modulated laser light delivered over telecommunications optical fiber to a photodiode located at the 1K stage of a dilution cryostat. During each experiment, we performed repeated measurements of the energy relaxation and coherence times of a transmon qubit using one of the control signal delivery methods. Each measurement run spanned 20 hours of measurement time and from these datasets we observe no measurable effect on coherence of the qubit compared to random coherence fluctuations. Our results open up the possibility of large scale integration of the optical qubit control system.
We report a comparative study on microwave control lines for a transmon qubit using (i) flexible stripline transmission lines and (ii) semi-rigid coaxial cables. During each experiment, we performed repeated measurements of the energy relaxation and coherence times of a transmon qubit using one of the wiring configurations. Each measurement run spanned 70–250 h of the measurement time, and four separate cooldowns were performed so that each configuration could be tested twice. From these datasets, we observe that changing the microwave control lines from coaxial cables to flexible stripline transmission lines does not have a measurable effect on coherence compared to thermal cycling the system or random coherence fluctuations. Our results open up the possibility of large-scale integration of qubit control lines with integrated component with planar layouts on flexible substrate.
Superconducting circuits exhibit remarkable potential for constructing large-scale quantum simulation and computation systems, featuring numerous qubits, extended coherence time, and precise control. Nevertheless, the growing number of signal cables poses a challenge in dilution refrigerators due to space and heat load constraints. To overcome this issue, we experimentally implemented an optically-assisted transmission line as an alternative to coaxial cables. By modulating microwave signals on laser intensities at room temperature and regenerating the signals at a cryogenic plate within the dilution refrigerator, we demonstrated full control of superconducting qubits using photocurrent. We demonstrate and benchmark both single-qubit and two-qubit gates on frequency tunable transmon qubits, achieving fidelities of 99.915% ±\pm± 0.005% and 99.676% ±\pm± 0.041%, respectively, which have reached the requirement of the surface code.
Superconducting quantum circuits operate at millikelvin temperatures, typically requiring independent microwave cables for each qubit for connecting room-temperature control and readout electronics. However, scaling to large-scale processors hosting hundreds of qubits faces a severe input/output (I/O) bottleneck, as the dense cable arrays impose prohibitive constraints on physical footprint, thermal load, wiring complexity, and cost. Here we demonstrate a complete optical I/O architecture for superconducting quantum circuits, in which all control and readout signals are transmitted exclusively via optical photons. Employing a broadband traveling-wave Brillouin microwave-to-optical transducer, we achieve simultaneous frequency-multiplexed optical readout of two qubits. Combined with fiber-integrated photodiode arrays for control signal delivery, this closed-loop optical I/O introduces no measurable degradation to qubit coherence times, with an optically driven single-qubit gate fidelity showing only a 0.19% reduction relative to standard microwave operation. These results establish optical interconnects as a viable path toward large-scale superconducting quantum processors, and open the possibility of networking multiple superconducting quantum computers housed in separate dilution refrigerators through a centralized room-temperature control infrastructure.
Distributed quantum networks are important for scalable quantum processors and for potential applications in communication, distributed computation, and sensing, in which direct classical links for adaptive control are essential to harness the shared entanglement. However, controlling superconducting quantum processors from a separate refrigerator over long distances remains elusive. Here, we introduce a coherent optical link (COL) that delivers microwave waveforms and their phase references between dilution refrigerators. Combining a laser, a microwave-to-optical transducer and an optical-to-microwave photodiode, the COL transmits microwave control signals over 10~km of fiber, while optical references derived from the same laser compensate for the frequency mismatch between devices. Through the COL, we deliver a universal gate set to a transmon qubit and a cavity qubit in another refrigerator and entangle them, and achieve a Bell-state fidelity of 80.6\%. Quantum control delivered through the COL thus provides a classical backbone for modular quantum processors.
With the rapid development of superconducting quantum computing and the implementation of surface code, large-scale quantum computing is emerging as an urgent demand. In a superconducting computing system, the qubit is maintained in a cryogenic environment to avoid thermal excitation. Thus, the transmission of control signals, which are generated at room temperature, is needed. Typically, the transmission of these signals to the qubit relies on a coaxial cable wiring approach. However, in a large-scale computing system with hundreds or even thousands of qubits, the coaxial cables will pose great space and heat load to the dilution refrigerator. Here, to tackle this problem, we propose and demonstrate a direct-modulation-based optical transmission line. In our experiment, the average single-qubit XEB error and control error are measured as 0.139% and 0.014% separately, demonstrating the feasibility of the optical wiring approach and paving the way for large-scale superconducting quantum computing.
Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime T1T_1T1​, coherence time T2∗T_2^*T2∗​ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for T1T_1T1​ and T2∗T_2^*T2∗​, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of 0.460.460.46% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.