Quantum crosstalk poses a major challenge to scaling up quantum computations as its strength is typically unknown and its effect accumulates exponentially as system size grows. Here, we show that many-body robust control can be utilized to suppress unwanted couplings during multi-qubit gate operations and state preparation. By combining tensor network simulations with the GRAPE algorithm, and leveraging an efficient random sampling over noise ensembles, our method overcomes the exponential scaling of the Hilbert space. We demonstrate its effectiveness for designing control solutions for high-fidelity implementations of parallel X gates and parallel CNOT on a chain of 50 qubits, and for realizing a 30-qubit GHZ state and the ground state of a 20-qubit Heisenberg model. In the presence of many-body quantum crosstalk due to parasitic interaction between neighboring qubits, robust control results in order-of magnitude improvement in fidelity for large system sizes. These findings pave the way for more reliable operations on near-term quantum processors.
Quantum crosstalk poses a major challenge to scaling up quantum computations as its strength is typically unknown and its effect accumulates exponentially as system size grows. Here, we show that many-body robust control can be utilized to suppress unwanted couplings during multi-qubit gate operations and state preparation. By combining tensor network simulations with the GRAPE algorithm, and leveraging an efficient random sampling over noise ensembles, our method overcomes the exponential scaling of the Hilbert space. We demonstrate its effectiveness for designing control solutions for high-fidelity implementations of parallel X gates and parallel CNOT on a chain of 50 qubits, and for realizing a 30-qubit GHZ state and the ground state of a 20-qubit Heisenberg model. In the presence of many-body quantum crosstalk due to parasitic interaction between neighboring qubits, robust control results in order-of magnitude improvement in fidelity for large system sizes. These findings pave the way for more reliable operations on near-term quantum processors.
Accurate and efficient implementation of parallel quantum gates is crucial for scalable quantum information processing. However, the unavoidable crosstalk between qubits in current noisy processors impedes the achievement of high gate fidelities and renders full Hilbert-space control optimization prohibitively difficult. Here, we overcome this challenge by reducing the full-system optimization to crosstalk-robust control over constant-sized subsystems, which dramatically reduces the computational cost. Our method effectively eliminates the leading-order gate operation deviations induced by crosstalk, thereby suppressing error rates. Within this framework, we construct analytical pulse solutions for parallel single-qubit gates and numerical pulses for parallel multi-qubit operations. We validate the proposed approach numerically across multiple platforms, including coupled nitrogen-vacancy centers, a nuclear-spin processor, and superconducting-qubit arrays with up to 200 qubits. As a result, the noise scaling is reduced from exponential to linear for parallel single-qubit gates, and an order-of-magnitude reduction is achieved for parallel multi-qubit gates. Moreover, our method does not require precise knowledge of crosstalk strengths and makes no assumption about the underlying qubit connectivity or lattice geometry, thereby establishing a scalable framework for parallel quantum control in large-scale quantum architectures.
The potential of quantum computing is fundamentally constrained by the inherent susceptibility of qubits to noise and crosstalk, particularly during multi-qubit gate operations.
Existing strategies, such as hardware isolation and dynamical decoupling, face limitations in scalability, experimental feasibility, and robustness against complex noise sources.
In this manuscript, we propose a physics-guided neural control (PGNC) framework to generate robust control pulses for superconducting transmon qubit systems, specifically targeting crosstalk mitigation.
By combining a hardware aware parameterization with a Hamiltonian-informed objective that accounts for condition-dependent crosstalk distortions, PGNC steers the search toward smooth and physically realizable pulses while efficiently exploring high dimensional control landscapes.
Numerical simulations for the CZ gate demonstrate superior fidelity and pulse smoothness compared to a Krotov baseline under matched constraints.
Taken together, the results show consistent and practically meaningful improvements in both nominal and perturbed conditions, with pronounced gains in worst-case fidelity, supporting PGNC as a viable route to robust control on near-term transmon devices.
Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.
As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.
One of the key challenges in current Noisy Intermediate-Scale Quantum (NISQ) computers is to control a quantum system with high-fidelity quantum gates. There are many reasons a quantum gate can go wrong - for superconducting transmon qubits in particular, one major source of gate error is the unwanted crosstalk between neighboring qubits due to a phenomenon called frequency crowding. We motivate a systematic approach for understanding and mitigating the crosstalk noise when executing near-term quantum programs on superconducting NISQ computers. We present a general software solution to alleviate frequency crowding by systematically tuning qubit frequencies according to input programs, trading parallelism for higher gate fidelity when necessary. The net result is that our work dramatically improves the crosstalk resilience of tunable-qubit, fixed-coupler hardware, matching or surpassing other more complex architectural designs such as tunable-coupler systems. On NISQ benchmarks, we improve worst-case program success rate by 13.3x on average, compared to existing traditional serialization strategies.
Current advancements in technology have focused the attention of the quantum computing community toward exploring the potential of near-term devices whose computing power surpasses that of classical computers in practical applications. An unresolved central question revolves around whether the inherent noise in these devices can be overcome or whether any potential quantum advantage would be limited. There is no doubt that crosstalk is one of the main sources of noise in noisy intermediate-scale quantum (NISQ) systems, and it poses a fundamental challenge to hardware designs. Crosstalk between parallel instructions can corrupt quantum states and cause incorrect program execution. In this study, we present a necessary analysis of the crosstalk error effect on NISQ devices. Our approach is extremely straightforward and practical to estimate the crosstalk error of various multi-qubit devices. In particular, we combine the randomized benchmarking (RB) and simultaneous randomized benchmarking (SRB) protocol to estimate the crosstalk error from the correlation controlled-NOT (CNOT) gate. We demonstrate this protocol experimentally on 5-, 7-, \& 16-qubit devices. Our results demonstrate the crosstalk error model of three different IBM quantum devices over the experimental week and compare the error variation against the machine, number of qubits, quantum volume, processor, and topology. We then confirm the improvement in the circuit fidelity on different benchmarks by up to 3.06x via inserting an instruction barrier, as compared with an IBM quantum noisy device which offers near-optimal crosstalk mitigation in practice. Finally, we discuss the current system limitation, its tradeoff on fidelity and depth, noise beyond the NISQ system, and mitigation opportunities to ensure that the quantum operation can perform its quantum magic undisturbed.