Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.03051

Scaling of silicon spin qubits under correlated noise

Juan S. Rojas-Arias, Leon C. Camenzind, Yi-Hsien Wu, Peter Stano, Akito Noiri, Kenta Takeda, Takashi Nakajima, Takashi Kobayashi, Giordano Scappucci, Daniel Loss, Seigo Tarucha

cond-mat.mes-hallquant-phSubmitted Mar 3, 2026• Announced Mar 4, 2026• 7 citations
arXivHTMLPDF

Abstract

The path to fault-tolerant quantum computing hinges on hardware that scales while remaining compatible with quantum error correction (QEC). Silicon spin qubits are a leading hardware candidate because they combine industrial fabrication compatibility with a nanoscale footprint that could accommodate millions of qubits on a chip. However, their suitability for QEC remains uncertain since spatially correlated noise naturally emerges from the resulting close proximity of qubits. These correlations increase the likelihood of simultaneous errors and erode the redundancy that QEC depends on. Here we quantify the spatial extent of noise correlations in a five-qubit silicon array and assess their impact on QEC. We identify two distinct sources of correlated noise: global magnetic field drifts that generate perfectly correlated fluctuations, and charge noise from two-level fluctuators that produces short-range correlations decaying within neighboring qubits. While magnetic drifts represent a critical correlated noise source that can compromise QEC, they can be mitigated. In contrast, the measured charge noise correlations are moderate, electrically tunable, and compatible with fault-tolerant operation with minimal qubit overhead. Our results establish quantitative benchmarks for correlated noise and clarify how such correlations impact the viability of quantum error correction in scalable qubit arrays.

Comments
26 pages, 5 main figures, 10 Extended Data figures

Related papers

Noise correlations in an atom-based quantum dot array

M. B. Donnelly, J. Rowlands, Ludwik Kranz +9 more

Correlated noise across multiqubit architectures is known to be highly detrimental to the operation of error-correcting codes and the long-term feasibility of quantum processors. The recent discovery of spatially dependent correlated noise in multiqubit architectures of superconducting qubits arising from the impact of cosmic radiation and high-energy particles giving rise to quasiparticle poisoning within the substrate has led to intense investigations of mitigation strategies to address this. Correlated noise in semiconductor spin qubits is also now receiving attention, as this platform begins to scale. Here we report the magnitude, frequency, and spatial dependence of noise correlations between four silicon quantum dot pairs as a function of interdot distance at frequencies from 0.3 to 1 mHz. We find the magnitude of charge-noise correlations, quantified by the magnitude square coherence C x y , are significantly suppressed from > 0.5 to < 0.1 as the interdot distance increases from 75 to 300 nm. Using an analytical model we confirm that, in contrast to superconducting qubits, the dominant source of correlated noise arises from low-frequency charge noise from the presence of two level fluctuators (TLFs) at the native silicon-silicon dioxide surface. Knowing this, we conclude with a timely discussion of charge-noise mitigation strategies.

arXiv:2405.03763•Physical Review Applied•May 12, 2025•15 citations

QEC-C II: Robust Control under Correlated Decoherence

Ethan Arthur Caspian

Quantum error correction (QEC) faces a significant challenge in realistic noisy intermediate-scale quantum (NISQ) devices: correlated decoherence. Building upon the foundational QEC-C protocol, we introduce QEC-C II, a scalable framework that delivers robust fault tolerance against spatially and temporally correlated noise. By integrating decoherence-free subspace (DFS) principles and correlation-aware adaptive feedback, QEC-C II achieves exponential error suppression in simulation under correlated noise models, with fewer physical qubits than typical topological baselines for the same target error in our benchmarks. The protocol leverages an enhanced scaling law, β(n) = 0.788 e 0.360n , and efficiently suppresses noise with minimal computational overhead. We validate QEC-C II on 28-qubit GHZ states, extend it to 56-qubit subspaces, and conduct 84-qubit stress-test simulations under correlated noise models. The results demonstrate sustained fidelities exceeding 99.99 % in simulations under realistic dephasing, amplitude-damping, burst-error, and correlated decoherence scenarios, with rapid convergence (typically ≤ 2 iterations in our simulations). QEC-C II significantly reduces both resource and control complexity, simplifying hardware integration and improving performance with increasing system size. This work provides a practical pathway toward resource-efficient fault tolerance in quantum processors operating in real-world correlated environments.

•Jan 1, 2025•0 citations

Decoherence Impediments in Quantum Computing and Fundamental Challenges of Quantum Error Correction

Shahebaz Ahmed Khan, Abdul Ahad Afroz, Shaik Subhan Ali

This review synthesizes current understanding of decoherence pathways across leading hardware platforms and explains why several experimentally observed noise features—drift, burst events, coherent components, correlated and non-Markovian structure, and leakage—can be disproportionately damaging for QEC. Decoherence remains the dominant impediment to scalable quantum computing because it is not a single error mechanism but a system-level phenomenon arising from materials defects, electromagnetic loss, control electronics, measurement backaction, and the broader environment in which a processor operates. Quantum error correction (QEC) is designed to algorithmically suppress physical noise, yet its practical success depends on how closely real devices satisfy the assumptions under which fault tolerance is proved: approximate locality, weak temporal correlations, sufficiently stochastic error statistics, low leakage, and reliable syndrome extraction. We then evaluate fundamental and engineering challenges that shape the viability of QEC at scale: syndrome measurement fidelity, correlated error suppression, decoding latency and classical co-processing, architectural constraints (connectivity, crosstalk, calibration overhead), and the resource cost of implementing a universal fault-tolerant gate set. Recent demonstrations of below-threshold behaviour and “break-even” regimes show that QEC is transitioning from theory to practice, but also clarify what remains unresolved: maintaining stable noise below fault-tolerance targets over long times, scaling to many logical qubits with low correlated-error rates, and integrating hardware-aware codes and decoders. We conclude with research priorities that treat decoherence and QEC as part of a co-designed stack spanning device physics, control, architecture, and algorithms.

Asian Journal of Research in Computer Science•Dec 24, 2025•2 citations

Impact of gate-voltage noise on silicon spin-qubit variational quantum eigensolvers

Xinning Wang, Bohdan Khromets, Zachery Merino +1 more

Quantum computers offer a route to outperform classical methods in tasks such as molecular simulation, motivating hybrid algorithms like the Variational Quantum Eigensolver (VQE) for near-term devices. Silicon spin qubits are a promising platform for scalable quantum computation, but their performance is limited by hardware imperfections -- most notably charge-noise-induced potential fluctuations and static miscalibration of gate-electrode voltages -- which degrade quantum gate fidelities and, ultimately, algorithmic accuracy. Here we develop a hardware-algorithm co-simulation framework for silicon quantum-dot processors that links 3D electrostatics to effective $g$-factors and exchange couplings, and propagates voltage-level noise through realistic control pulses. Using VQE for $\mathrm{H}_2$ ground-state energy estimation as a circuit-level testbed, we study both static scaling/offset errors on the gate-electrode voltages and stochastic fluctuations modeled as random-telegraph noise with tunable amplitudes and switching times. At the gate level, we show that exchange-based two-qubit gates are roughly an order of magnitude more sensitive to these types of noise than ESR-driven single-qubit rotations. Quantum process tomography and Kraus-operator analysis further distinguish coherent and incoherent contributions and quantify the fraction of error that is, in principle, correctable by a compensating unitary. Embedding these noise models into the VQE circuit, we identify regimes of miscalibration strength and noise switching time compatible with chemically accurate energy estimates, and discuss how statistical post-processing based on the full distribution of noisy energy estimates could further improve accuracy.

quant-pharXiv:2606.08874•Quantum Science and Technology•Jun 9, 2026•0 citations

Surface Code Error Correction with Crosstalk Noise

Zeyuan Zhou, Andrew Ji, Yongshan Ding

The design and performance analysis of quantum error correction (QEC) codes are often based on incoherent and independent noise models since it is easy to simulate. However, these models fail to capture realistic hardware noise sources, such as correlated errors (crosstalk), which can significantly impact QEC code performance, especially when they occur between data and ancillary qubits. In this paper, we systematically study various types of crosstalk noise and quantify their effects on surface codes through memory and stability experiments. Based on our findings, we introduce crosstalk-robust implementations of QEC via flag qubit designs and redundant stabilizer checks. We perform both numerical and analytical studies to demonstrate the efficacy of these strategies. In addition, we analyze logical crosstalk in an$[[n, k>1, d]]$code block and establish analytical conditions under which physical crosstalk does not lead to logical crosstalk. Together, our analytical and numerical results shed light on designing QEC codes that are robust against hardware realistic crosstalk noise, paving the way for reliable experimental realization of fault-tolerant quantum computing.

arXiv:2503.04642•IEEE International Conference on Quantum Computing and Engineering (QCE)•Aug 30, 2025•20 citations

Optimal operating temperature for industry-compatible silicon spin quantum computing: colder is not necessarily better

Paul Steinacker, Amanda E. Seedhouse, Nard Dumoulin Stuyck +22 more

Silicon spin qubits are a leading candidate for large-scale quantum computing owing to their compatibility with semiconductor manufacturing. However, scaling to useful fault-tolerant processors will likely generate thermal loads that exceed the cooling power available at millikelvin temperatures. Raising the operating temperature eases cooling requirements but reduces gate fidelity, increasing the overhead of quantum error correction. Identifying the operating temperature that minimizes total power consumption is therefore a key challenge for commercially viable quantum computers. Here, we use gate set tomography to benchmark two-qubit silicon chips fabricated in both industrial and academic environments over a range of temperatures. Elevated temperatures substantially shorten coherence times and increase gate and state-preparation-and-measurement infidelities. Based on these measurements, we develop a general power model for silicon quantum computers that combines cryogenic cooling requirements with error-correction overheads. We show that a finite optimal operating temperature exists and is strongly influenced by a crossover temperature near 1 K in current devices, above which gate fidelity degrades rapidly. These results connect device-level fidelity limitations to system-level power requirements, providing design guidelines for large-scale silicon quantum computers.

quant-pharXiv:2607.11846•Jul 14, 2026•2 citations
The path to fault-tolerant quantum computing hinges on hardware that scales while remaining compatible with quantum error correction (QEC). Silicon spin qubits are a leading hardware candidate because they combine industrial fabrication compatibility with a nanoscale footprint that could accommodate millions of qubits on a chip. However, their suitability for QEC remains uncertain since spatially correlated noise naturally emerges from the resulting close proximity of qubits. These correlations increase the likelihood of simultaneous errors and erode the redundancy that QEC depends on. Here we quantify the spatial extent of noise correlations in a five-qubit silicon array and assess their impact on QEC. We identify two distinct sources of correlated noise: global magnetic field drifts that generate perfectly correlated fluctuations, and charge noise from two-level fluctuators that produces short-range correlations decaying within neighboring qubits. While magnetic drifts represent a critical correlated noise source that can compromise QEC, they can be mitigated. In contrast, the measured charge noise correlations are moderate, electrically tunable, and compatible with fault-tolerant operation with minimal qubit overhead. Our results establish quantitative benchmarks for correlated noise and clarify how such correlations impact the viability of quantum error correction in scalable qubit arrays.
Correlated noise across multiqubit architectures is known to be highly detrimental to the operation of error-correcting codes and the long-term feasibility of quantum processors. The recent discovery of spatially dependent correlated noise in multiqubit architectures of superconducting qubits arising from the impact of cosmic radiation and high-energy particles giving rise to quasiparticle poisoning within the substrate has led to intense investigations of mitigation strategies to address this. Correlated noise in semiconductor spin qubits is also now receiving attention, as this platform begins to scale. Here we report the magnitude, frequency, and spatial dependence of noise correlations between four silicon quantum dot pairs as a function of interdot distance at frequencies from 0.3 to 1 mHz. We find the magnitude of charge-noise correlations, quantified by the magnitude square coherence C x y , are significantly suppressed from > 0.5 to < 0.1 as the interdot distance increases from 75 to 300 nm. Using an analytical model we confirm that, in contrast to superconducting qubits, the dominant source of correlated noise arises from low-frequency charge noise from the presence of two level fluctuators (TLFs) at the native silicon-silicon dioxide surface. Knowing this, we conclude with a timely discussion of charge-noise mitigation strategies.
Quantum error correction (QEC) faces a significant challenge in realistic noisy intermediate-scale quantum (NISQ) devices: correlated decoherence. Building upon the foundational QEC-C protocol, we introduce QEC-C II, a scalable framework that delivers robust fault tolerance against spatially and temporally correlated noise. By integrating decoherence-free subspace (DFS) principles and correlation-aware adaptive feedback, QEC-C II achieves exponential error suppression in simulation under correlated noise models, with fewer physical qubits than typical topological baselines for the same target error in our benchmarks. The protocol leverages an enhanced scaling law, β(n) = 0.788 e 0.360n , and efficiently suppresses noise with minimal computational overhead. We validate QEC-C II on 28-qubit GHZ states, extend it to 56-qubit subspaces, and conduct 84-qubit stress-test simulations under correlated noise models. The results demonstrate sustained fidelities exceeding 99.99 % in simulations under realistic dephasing, amplitude-damping, burst-error, and correlated decoherence scenarios, with rapid convergence (typically ≤ 2 iterations in our simulations). QEC-C II significantly reduces both resource and control complexity, simplifying hardware integration and improving performance with increasing system size. This work provides a practical pathway toward resource-efficient fault tolerance in quantum processors operating in real-world correlated environments.
This review synthesizes current understanding of decoherence pathways across leading hardware platforms and explains why several experimentally observed noise features—drift, burst events, coherent components, correlated and non-Markovian structure, and leakage—can be disproportionately damaging for QEC. Decoherence remains the dominant impediment to scalable quantum computing because it is not a single error mechanism but a system-level phenomenon arising from materials defects, electromagnetic loss, control electronics, measurement backaction, and the broader environment in which a processor operates. Quantum error correction (QEC) is designed to algorithmically suppress physical noise, yet its practical success depends on how closely real devices satisfy the assumptions under which fault tolerance is proved: approximate locality, weak temporal correlations, sufficiently stochastic error statistics, low leakage, and reliable syndrome extraction. We then evaluate fundamental and engineering challenges that shape the viability of QEC at scale: syndrome measurement fidelity, correlated error suppression, decoding latency and classical co-processing, architectural constraints (connectivity, crosstalk, calibration overhead), and the resource cost of implementing a universal fault-tolerant gate set. Recent demonstrations of below-threshold behaviour and “break-even” regimes show that QEC is transitioning from theory to practice, but also clarify what remains unresolved: maintaining stable noise below fault-tolerance targets over long times, scaling to many logical qubits with low correlated-error rates, and integrating hardware-aware codes and decoders. We conclude with research priorities that treat decoherence and QEC as part of a co-designed stack spanning device physics, control, architecture, and algorithms.
Quantum computers offer a route to outperform classical methods in tasks such as molecular simulation, motivating hybrid algorithms like the Variational Quantum Eigensolver (VQE) for near-term devices. Silicon spin qubits are a promising platform for scalable quantum computation, but their performance is limited by hardware imperfections -- most notably charge-noise-induced potential fluctuations and static miscalibration of gate-electrode voltages -- which degrade quantum gate fidelities and, ultimately, algorithmic accuracy. Here we develop a hardware-algorithm co-simulation framework for silicon quantum-dot processors that links 3D electrostatics to effective ggg-factors and exchange couplings, and propagates voltage-level noise through realistic control pulses. Using VQE for H2\mathrm{H}_2H2​ ground-state energy estimation as a circuit-level testbed, we study both static scaling/offset errors on the gate-electrode voltages and stochastic fluctuations modeled as random-telegraph noise with tunable amplitudes and switching times. At the gate level, we show that exchange-based two-qubit gates are roughly an order of magnitude more sensitive to these types of noise than ESR-driven single-qubit rotations. Quantum process tomography and Kraus-operator analysis further distinguish coherent and incoherent contributions and quantify the fraction of error that is, in principle, correctable by a compensating unitary. Embedding these noise models into the VQE circuit, we identify regimes of miscalibration strength and noise switching time compatible with chemically accurate energy estimates, and discuss how statistical post-processing based on the full distribution of noisy energy estimates could further improve accuracy.
The design and performance analysis of quantum error correction (QEC) codes are often based on incoherent and independent noise models since it is easy to simulate. However, these models fail to capture realistic hardware noise sources, such as correlated errors (crosstalk), which can significantly impact QEC code performance, especially when they occur between data and ancillary qubits. In this paper, we systematically study various types of crosstalk noise and quantify their effects on surface codes through memory and stability experiments. Based on our findings, we introduce crosstalk-robust implementations of QEC via flag qubit designs and redundant stabilizer checks. We perform both numerical and analytical studies to demonstrate the efficacy of these strategies. In addition, we analyze logical crosstalk in an[[n,k>1,d]][[n, k>1, d]][[n,k>1,d]]code block and establish analytical conditions under which physical crosstalk does not lead to logical crosstalk. Together, our analytical and numerical results shed light on designing QEC codes that are robust against hardware realistic crosstalk noise, paving the way for reliable experimental realization of fault-tolerant quantum computing.
Silicon spin qubits are a leading candidate for large-scale quantum computing owing to their compatibility with semiconductor manufacturing. However, scaling to useful fault-tolerant processors will likely generate thermal loads that exceed the cooling power available at millikelvin temperatures. Raising the operating temperature eases cooling requirements but reduces gate fidelity, increasing the overhead of quantum error correction. Identifying the operating temperature that minimizes total power consumption is therefore a key challenge for commercially viable quantum computers. Here, we use gate set tomography to benchmark two-qubit silicon chips fabricated in both industrial and academic environments over a range of temperatures. Elevated temperatures substantially shorten coherence times and increase gate and state-preparation-and-measurement infidelities. Based on these measurements, we develop a general power model for silicon quantum computers that combines cryogenic cooling requirements with error-correction overheads. We show that a finite optimal operating temperature exists and is strongly influenced by a crossover temperature near 1 K in current devices, above which gate fidelity degrades rapidly. These results connect device-level fidelity limitations to system-level power requirements, providing design guidelines for large-scale silicon quantum computers.