A promising way to scale up superconducting quantum computers is to link different devices together using propagating photons. Correspondingly, accurately modeling the quantum information transfer in such quantum interconnects is critical to advancing this emerging technology. To accomplish this, a full-wave quantum numerical model is essential for describing the few-photon transport characteristics of various components. Unfortunately, validating the accuracy of such numerical models remains a difficult challenge due to the lack of appropriate analytical solutions for standard component types. Recently, progress has been made on creating the first-ever analytical quantum full-wave solutions for a superconducting circuit quantum device. These efforts considered the case of two-photon transport through an empty rectangular waveguide cavity and the interactions of photons inside a closed rectangular waveguide cavity with a transmon qubit formed by a Josephson junction connected across the terminals of a small wire dipole antenna. Here, we advance these efforts by considering the one- and two-photon transport properties through a rectangular waveguide cavity containing a qubit in this form when the cavity is interfaced with via two coaxial ports. Such devices can be used in various ways for quantum interconnects, such as to form parts of a quantum memory or a photon source. We perform this analysis leveraging a quantum input-output theory formalism to derive the relevant single- and two-photon transport characteristics of interest. We then examine the signatures of the nonlinear quantum scattering effects in the good and bad cavity regimes of cavity quantum electrodynamics. In the future, these analytical results can be used to validate numerical full-wave quantum solvers for modeling quantum interconnects.
A promising way to scale up superconducting quantum computers is to link different devices together using propagating photons. Correspondingly, accurately modeling the quantum information transfer in such quantum interconnects is critical to advancing this emerging technology. To accomplish this, a full-wave quantum numerical model is essential for describing the few-photon transport characteristics of various components. Unfortunately, validating the accuracy of such numerical models remains a difficult challenge due to the lack of appropriate analytical solutions for standard component types. Recently, progress has been made on creating the first-ever analytical quantum full-wave solutions for a superconducting circuit quantum device. These efforts considered the case of two-photon transport through an empty rectangular waveguide cavity and the interactions of photons inside a closed rectangular waveguide cavity with a transmon qubit formed by a Josephson junction connected across the terminals of a small wire dipole antenna. Here, we advance these efforts by considering the one- and two-photon transport properties through a rectangular waveguide cavity containing a qubit in this form when the cavity is interfaced with via two coaxial ports. Such devices can be used in various ways for quantum interconnects, such as to form parts of a quantum memory or a photon source. We perform this analysis leveraging a quantum input-output theory formalism to derive the relevant single- and two-photon transport characteristics of interest. We then examine the signatures of the nonlinear quantum scattering effects in the good and bad cavity regimes of cavity quantum electrodynamics. In the future, these analytical results can be used to validate numerical full-wave quantum solvers for modeling quantum interconnects.
A promising way to scale up quantum information processing hardware is to link different devices together using propagating photons. To accurately model these quantum effects, a fully-quantum treatment is needed to look at the photon transport properties at the single- and few-photon levels. Quantum full-wave numerical modeling will be critical to successfully designing these interconnects, but such tools do not yet exist and validating their performance as they are developed remains a challenge. In this work, we continue developing analytical quantum full-wave solutions that can be used to help validate these kinds of numerical methods. Here, we analyze a system where a single transmon qubit is inserted inside a 3D rectangular cavity, and consider its coupling to two coaxial ports. We then analyze the single-photon transport properties through this system by deriving the single-photon scattering matrix in the quantum input-output theory formalism. We then compare the results of the scattering matrices in the good- and bad-cavity limits, providing a validation aid for future numerical methods.
High-fidelity general-purpose numerical methods are increasingly needed to improve superconducting circuit quantum information processor performance. One challenge in developing such numerical methods is the lack of reference data to validate them. To address this, we have designed a 3-D system where all electromagnetic properties needed in a quantum analysis can be evaluated using analytical techniques from classical electromagnetic theory. Here, we review the basics of our field-based quantization method and then use these techniques to create the first-ever analytical quantum full-wave solution for a superconducting circuit quantum device. Specifically, we analyze a coaxial-fed 3-D waveguide cavity with and without transmon quantum bits inside the cavity. We validate our analytical solutions by comparing them to numerical methods in evaluating single-photon interference and computing key system parameters related to controlling quantum bits. In the future, our analytical solutions can be used to validate numerical methods, as well as build intuition about important quantum effects in realistic 3-D devices.
Circuit quantum electrodynamics is one of the most promising platforms for building quantum information processors. To meet the stringent performance requirements, high-fidelity general-purpose numerical methods are increasingly needed to improve designs. Currently, there exist a limited number of methods for analyzing these systems and they suffer from problematic efficiency limitations. One challenge in developing more efficient methods is the lack of available reference data that can be generated to validate them. Here, we develop an analytical quantum full-wave solution for a transmon qubit in a 3D cavity that can validate numerical methods in the future. We start by reviewing the basics of the field-based quantization method used before showing how classical electromagnetic theories can be used to analytically evaluate all field-based parameters in our formulation. We validate our analytical solution by calculating experimentally-relevant system parameters and comparing against approaches that use numerical EM eigenmodes in their solution.
Quantum electromagnetic effects in superconducting circuits are promising phenomena to develop revolutionary quantum information processing technologies. To design complex circuits, there is a need for the development of accurate full-wave numerical models. In this work, we study the simpler classical full-wave Hamiltonian of a coaxial-fed rectangular waveguide cavity to validate field-based parts of the corresponding quantum Hamiltonian. We present the formulation of the system Hamiltonian and derive equations of motion. We compare results from our formulation using numerical eigenmodes to traditional transmission simulations of the system to validate the approach.
Quantum information processing technologies are gaining interest due to their potential for performance exceeding what is possible with the best classical computers. One of the most promising platforms is the circuit quantum electrodynamics (cQED) architecture that controls superconducting circuit qubits by coupling them to electromagnetic fields in microwave resonators or waveguides. As these devices become increasingly complex, existing analysis and design approaches that often rely on lumped element circuit approximations can become inadequate due to their lack of accuracy and flexibility. This is leading to a growing interest in developing quantum full-wave numerical modeling methods for the high-fidelity analysis of cQED devices. In this work, we focus on a quantum full-wave modeling approach that uses a projector-based quantization approach that allows a problem to be decomposed into distinct subdomains whose fields can be quantized more easily. This leads to a framework that can naturally incorporate microwave ports, which is not straightforward with other formulations. Here, we consider an explicit problem of a coaxial-fed rectangular waveguide cavity to validate parts of our projector-based formalism. Toward this end, we apply this approach to a classical Hamiltonian analysis of this system that can be used to more easily validate the relevant full-wave aspects of the corresponding quantum formulation. In addition to presenting the formulation of the full-wave classical Hamiltonian of the system, we derive equations of motion and discuss an analytical solution procedure with an input-output theory approach. We validate our formulation by comparing the input-output theory results to standard finite element method (FEM) scattering parameter simulations.
Strong coupling between light and matter has been demonstrated both in classical cavity quantum electrodynamics (QED) systems and in more recent circuit-QED experiments. This enables the generation of strong nonlinear photon-photon interactions at the single-photon level, which is of great interest for the observation of quantum nonlinear optical phenomena, the control of light quanta in quantum information protocols such as quantum networking, as well as the study of strongly correlated quantum many-body systems using light. Recently, strong coupling has also been realized in a variety of one-dimensional (1D) waveguide- QED experimental systems, which in turn makes them promising candidates for quantum information processing. Compared to cavity-QED systems, there are two new features in waveguide-QED: the existence of a continuum of states and the restricted 1D phase space, which together bring in new physical effects, such as the bound-state effects. This thesis consists of two parts: 1) understanding the fundamental interaction between local quantum objects, such as two-level systems and four-level systems, and photons confined in the waveguide; 2) exploring its implications in quantum information processing, in particular photonic quantum computation and quantum key distribution. First, we demonstrate that by coupling a two-level system (TLS) or three/fourlevel system to a 1D continuum, strongly-correlated photons can be generated inside the waveguide. Photon-photon bound states, which decay exponentially as a function of the relative coordinates of photons, appear in multiphoton scattering processes. As a result, photon bunching and antibunching can be observed in the photon-photon correlation function, and nonclassical light source can be generated on demand. In the case of an N-type four-level system, we show that the effective photon-photon interaction mediated by the four-level system, gives rise to a variety of nonlinear optical phenomena, including photon blockade, photon-induced tunneling, and creation of single-photon states and photon pairs with a high degree of spectral entanglement, all in the absence of a cavity. However, to enable greater quantum networking potential using waveguide- QED, it is important to study systems having more than just one TLS/qubit. We develop a numerical Green function method to study cooperative effects in a system of two qubits coupled to a 1D waveguide. Quantum beats emerge in photon-photon correlations, and persist to much longer time scales because of non-Markovian processes. In addition, this system can be used to generate a high-degree of long-distance entanglement when one of the two qubits is driven by an on-resonance laser, further paving the way toward waveguide-QED-based quantum networks. Furthermore, based on our study of light-matter interactions in waveguide- QED, we investigate its implications in quantum information processing. First, we study quantum key distribution using the sub-Possonian single photon source obtained by scattering a coherent state off a two-level system. The rate for key generation is found to be twice as large as for other sources. Second, we propose a new scheme for scalable quantum computation using flying qubits--propagating photons in a one-dimensional waveguide--interacting with matter qubits. Photonphoton interactions are mediated by the coupling to a three- or four-level system, based on which photon-photon -phase gates (Controlled-NOT) can be implemented for universal quantum computation. We show that high gate fidelity is possible given recent dramatic experimental progress in superconducting circuits and photonic-crystal waveguides. The proposed system can be an important building block for future on-chip quantum networks.