Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2602.16929

Adaptive Aborting Schemes for Quantum Error Correction Decoding

Sanidhay Bhambay, Prakash Murali, Neil Walton, Thirupathaiah Vasantam

quant-phmath.PRSubmitted Feb 18, 2026• Announced Feb 20, 2026• 4 citations
arXivHTMLPDF

Abstract

Quantum error correction (QEC) is essential for realizing fault-tolerant quantum computation. Current QEC controllers execute all scheduled syndrome (parity-bit) measurement rounds before decoding, even when early syndrome data indicates that the run will result in an error. The resulting excess measurements increase the decoder's workload and system latency. To address this, we introduce an adaptive abort module that simultaneously reduces decoder overhead and suppresses logical error rates in surface codes and color codes under an existing QEC controller. The key idea is that initial syndrome information allows the controller to terminate risky shots early before additional resources are spent. An effective scheme balances the cost of further measurement against the restart cost and thus increases decoder efficiency. Adaptive abort schemes dynamically adjust the number of syndrome measurement rounds per shot using real-time syndrome information. We consider three schemes: fixed-depth (FD) decoding (the standard non-adaptive approach used in current state-of-the-art QEC controllers), and two adaptive schemes, AdAbort and One-Step Lookahead (OSLA) decoding. For surface and color codes under a realistic circuit-level depolarizing noise model, AdAbort substantially outperforms both OSLA and FD, yielding higher decoder efficiency across a broad range of code distances. Numerically, as the code distance increases from 5 to 15, AdAbort yields an improvement that increases from 5% to 35% for surface codes and from 7% to 60% for color codes. To our knowledge, these are the first adaptive abort schemes considered for QEC. Our results highlight the potential importance of abort rules for increasing efficiency as we scale to large, resource-intensive quantum architectures.

Related papers

Improving Threshold for Fault-Tolerant Color-Code Quantum Computing by Flagged Weight Optimization

Yugo Takada, Keisuke Fujii

Color codes are promising quantum error-correction (QEC) codes because they have an advantage over surface codes in that all Clifford gates can be implemented transversally. However, the thresholds of color codes under circuit-level noise are relatively low, mainly because measurements of their high-weight stabilizer generators cause an increase in the circuit depth and, thus, substantial errors are introduced. This makes color codes not the best candidate for fault-tolerant quantum computing. Here, we propose a method to suppress the impact of such errors by optimizing weights of decoders using conditional error probabilities conditioned on the measurement outcomes of flag qubits. In numerical simulations, we improve the threshold of the (4.8.8) color code under circuit-level noise from 0.14% to around 0.27%, which is calculated by using an integer programming decoder. Furthermore, in the (6.6.6) color code, we achieve a circuit-level threshold of around 0.36%, which is almost the same value as the highest value in the previous studies employing the same noise model. In both cases, the effective code distance is also improved compared to a conventional method that uses a single ancilla qubit for each stabilizer measurement. Thereby, the achieved logical error rates at low physical error rates are almost one order of magnitude lower than those of the conventional method with the same code distance. Even when compared to the single-ancilla method with a higher code distance, considering the increased number of qubits used in our method, we achieve lower logical error rates in most cases. This method can also be applied to other weight-based decoders, making the color codes more promising as candidates for the experimental implementation of QEC. Furthermore, one can utilize this approach to improve a threshold of wider classes of QEC codes, such as high-rate quantum low-density parity-check codes. Published by the American Physical Society 2024

arXiv:2402.13958•PRX Quantum•Sep 17, 2024•15 citations

Enhancing Surface Code Decoding with Adaptive Machine Learning–Based Quantum Error Correction

A Hussain, Priyanka Rani, Jayapal Lande +3 more

Quantum error correction is still an important hurdle for building fault-tolerant quantum computer. We proposed an adaptive quantum error correction (AQEC) framework that combines machine learning and traditional syndrome pairing approaches to improve error detection and correction efficiency. Our hybrid architecture combines surface codes with neural network-based syndrome decoders that learn optimal strategies for decoding in the presence of varying error rates. Our experimental results show a 23.7% improvement in logical error rate suppression over conventional lookup-table decoders at the same decoding latency, with 35% reduced decoding latency. Achieving a threshold error rate of $1.2 \%$, the proposed model allows for practical quantum computing applications using contemporary noisy intermediate-scale quantum (NISQ) devices This work connects theoretical error correction schemes with practical limitations on implementations in quantum systems.

International Conference on Advancements in Smart, Secure and Intelligent Computing (ASSIC)•Aug 1, 2026•0 citations

Low Latency GNN Accelerator for Quantum Error Correction

Alessio Cicero, Luigi Altamura, Moritz Lange +2 more

Quantum computers can solve selected problems more efficiently than classical computers, but current devices are limited by high physical error rates. Quantum Error Correction (QEC) mitigates this by encoding many physical qubits into a logical qubit, with the surface code among the most widely studied approaches. Since syndrome measurements are produced continuously, the decoder must process them fast enough to avoid becoming a system bottleneck, making real-time decoding essential for fault-tolerant quantum computing. While most state-of-the-art real-time decoders rely on Minimum-Weight Perfect Matching (MWPM), we instead use a high-accuracy Graph Neural Network (GNN) that trades higher computational cost for lower logical error rates. To make this GNN practical for real-time decoding, we apply algorithm-hardware co-design. We reduce complexity through hardware-guided pruning and retraining, producing two hardware-friendly models that reduce parameter count by $3.1\times$ and $6.5\times$. These target, respectively, an average decoding latency of one syndrome cycle and a worst-case latency within one syndrome cycle. We further reduce hardware cost using input-graph filtering and post-training quantization. Based on these optimized models, we propose an FPGA-based architecture for low-latency inference and real-time decoding. Evaluated on surface codes up to distance 7 under circuit-level noise at physical error rate $p=10^{-3}$, our decoder outperforms MWPM in decoding accuracy for both average-latency and max-latency settings. It reduces logical error rate by 40% at $1μs$ average latency, and by 13% under a strict $1μs$ deadline.

quant-pharXiv:2603.22149•Mar 24, 2026•4 citations

FPGA-Based Syndrome Decoder for Quantum Error Correction: Design and Simulation

Nihad Sarkarov

Especially in noisy intermediate-scale quantum (NISQ) devices, fault-tolerant quantum computing cannot be realized without quantum error correction. High error rates in quantum systems stemming from decoherence and gate defects call for effective and flexible QEC systems. This paper presents a novel FPGA-based architecture using dynamic reconfiguration to maximize hardware resources in response to real-time error patterns. Supporting bit-flip, phase-flip, and depolarizing faults among several error correction techniques guarantees high accuracy and little hardware overhead. Scaled for surface code distances up to and beyond, the design combines modular pipelines, adaptive hardware allocation, and error pattern detection. Designed on a Xilinx XC7A50T-CPG236 FPGA, the system showed notable gains over static architecture, averaging 30% lower latency and 20% less resource use overall. Low latency and high throughput are maintained while this dynamic technique enables flexible adaptability to several quantum error models. The outcomes show how well this structure may improve quantum error-correcting systems and enable the incorporation of QEC into useful quantum computer configurations.

•Feb 27, 2025•0 citations

Error Mitigation of Fault-Tolerant Quantum Circuits with Soft Information

Zeyuan Zhou, Shaun Pexton, Aleksander Kubica +1 more

Quantum error mitigation (QEM) is typically viewed as a suite of practical techniques for today's noisy intermediate-scale quantum devices, with limited relevance once fault-tolerant quantum computers become available. In this work, we challenge this conventional wisdom by showing that QEM can continue to provide substantial benefits in the era of quantum error correction (QEC), and in an even more efficient manner than it does on current devices. We introduce a framework for logical-level QEM that leverages soft information naturally produced by QEC decoders, requiring no additional data, hardware modifications, or runtime overhead beyond what QEC protocols already provide. Within this framework, we develop and analyze three logical-level QEM techniques: post-selection and runtime abort policies, probabilistic error cancellation, and zero-noise extrapolation. Our techniques reduce logical error rates by more than 100x while discarding fewer than 0.1% of shots; they also provide in situ characterization of logical channels for QEM protocols. As a proof of principle, we benchmark our approach using a surface-code architecture and two state-of-the-art decoders based on tensor-network contraction and minimum-weight perfect matching. We evaluate logical-level QEM on random Clifford circuits and molecular simulation algorithms and find that, compared to previous approaches relying on QEC only or QEC combined with QEM, we can achieve up to 87.4% spacetime overhead savings. Our results demonstrate that logical-level QEM with QEC decoder soft information can reliably improve logical performance, underscoring the efficiency and usefulness of QEM techniques for fault-tolerant quantum computers.

quant-pharXiv:2512.09863•Dec 11, 2025•26 citations

QAdapt: A Noise-Adaptive Neural Pre-Decoding Framework for Quantum Error Correction

Ran Miao, Rui Luo, Xiaohan Shan +1 more

Fault-tolerant quantum computing (FTQC) relies on quantum error correction to suppress physical errors and preserve logical information at scale. In practice, however, performance is constrained not only by physical noise but also by the latency of classical decoders processing rapidly generated syndrome data. This challenge is exacerbated by hardware noise that is strong, heterogeneous, and nonstationary, as well as by the simulation-to-hardware distribution shift that can substantially degrade fixed neural decoders. We present QAdapt, a noise-adaptive neural pre-decoding framework for surface-code quantum error correction. QAdapt captures local spatiotemporal correlations in syndrome data, sequentially adapts to evolving noise conditions while mitigating catastrophic forgetting, and forwards the residual syndrome to a conventional global decoder. Across 110 synthetic out-of-distribution noise configurations for rotated surface-code memory circuits, QAdapt consistently reduces the logical error rate relative to the neural pre-decoding baseline. On Google's Willow benchmark data, without target-domain fine-tuning, it achieves reductions of up to 5.79 percent in logical error rate and 9.32 percent in backend decoding latency on the residual syndrome. These results demonstrate that QAdapt provides a practical and decoder-compatible approach to improving the robustness and backend decoding efficiency of quantum error correction under evolving hardware noise.

cs.LGCross-listedarXiv:2607.28422•Jul 31, 2026•3 citations
Quantum error correction (QEC) is essential for realizing fault-tolerant quantum computation. Current QEC controllers execute all scheduled syndrome (parity-bit) measurement rounds before decoding, even when early syndrome data indicates that the run will result in an error. The resulting excess measurements increase the decoder's workload and system latency. To address this, we introduce an adaptive abort module that simultaneously reduces decoder overhead and suppresses logical error rates in surface codes and color codes under an existing QEC controller. The key idea is that initial syndrome information allows the controller to terminate risky shots early before additional resources are spent. An effective scheme balances the cost of further measurement against the restart cost and thus increases decoder efficiency.
Adaptive abort schemes dynamically adjust the number of syndrome measurement rounds per shot using real-time syndrome information. We consider three schemes: fixed-depth (FD) decoding (the standard non-adaptive approach used in current state-of-the-art QEC controllers), and two adaptive schemes, AdAbort and One-Step Lookahead (OSLA) decoding. For surface and color codes under a realistic circuit-level depolarizing noise model, AdAbort substantially outperforms both OSLA and FD, yielding higher decoder efficiency across a broad range of code distances. Numerically, as the code distance increases from 5 to 15, AdAbort yields an improvement that increases from 5% to 35% for surface codes and from 7% to 60% for color codes.
To our knowledge, these are the first adaptive abort schemes considered for QEC. Our results highlight the potential importance of abort rules for increasing efficiency as we scale to large, resource-intensive quantum architectures.
Color codes are promising quantum error-correction (QEC) codes because they have an advantage over surface codes in that all Clifford gates can be implemented transversally. However, the thresholds of color codes under circuit-level noise are relatively low, mainly because measurements of their high-weight stabilizer generators cause an increase in the circuit depth and, thus, substantial errors are introduced. This makes color codes not the best candidate for fault-tolerant quantum computing. Here, we propose a method to suppress the impact of such errors by optimizing weights of decoders using conditional error probabilities conditioned on the measurement outcomes of flag qubits. In numerical simulations, we improve the threshold of the (4.8.8) color code under circuit-level noise from 0.14% to around 0.27%, which is calculated by using an integer programming decoder. Furthermore, in the (6.6.6) color code, we achieve a circuit-level threshold of around 0.36%, which is almost the same value as the highest value in the previous studies employing the same noise model. In both cases, the effective code distance is also improved compared to a conventional method that uses a single ancilla qubit for each stabilizer measurement. Thereby, the achieved logical error rates at low physical error rates are almost one order of magnitude lower than those of the conventional method with the same code distance. Even when compared to the single-ancilla method with a higher code distance, considering the increased number of qubits used in our method, we achieve lower logical error rates in most cases. This method can also be applied to other weight-based decoders, making the color codes more promising as candidates for the experimental implementation of QEC. Furthermore, one can utilize this approach to improve a threshold of wider classes of QEC codes, such as high-rate quantum low-density parity-check codes. Published by the American Physical Society 2024
Quantum error correction is still an important hurdle for building fault-tolerant quantum computer. We proposed an adaptive quantum error correction (AQEC) framework that combines machine learning and traditional syndrome pairing approaches to improve error detection and correction efficiency. Our hybrid architecture combines surface codes with neural network-based syndrome decoders that learn optimal strategies for decoding in the presence of varying error rates. Our experimental results show a 23.7% improvement in logical error rate suppression over conventional lookup-table decoders at the same decoding latency, with 35% reduced decoding latency. Achieving a threshold error rate of 1.2%1.2 \%1.2%, the proposed model allows for practical quantum computing applications using contemporary noisy intermediate-scale quantum (NISQ) devices This work connects theoretical error correction schemes with practical limitations on implementations in quantum systems.
Quantum computers can solve selected problems more efficiently than classical computers, but current devices are limited by high physical error rates. Quantum Error Correction (QEC) mitigates this by encoding many physical qubits into a logical qubit, with the surface code among the most widely studied approaches. Since syndrome measurements are produced continuously, the decoder must process them fast enough to avoid becoming a system bottleneck, making real-time decoding essential for fault-tolerant quantum computing. While most state-of-the-art real-time decoders rely on Minimum-Weight Perfect Matching (MWPM), we instead use a high-accuracy Graph Neural Network (GNN) that trades higher computational cost for lower logical error rates. To make this GNN practical for real-time decoding, we apply algorithm-hardware co-design. We reduce complexity through hardware-guided pruning and retraining, producing two hardware-friendly models that reduce parameter count by 3.1×3.1\times3.1× and 6.5×6.5\times6.5×. These target, respectively, an average decoding latency of one syndrome cycle and a worst-case latency within one syndrome cycle. We further reduce hardware cost using input-graph filtering and post-training quantization. Based on these optimized models, we propose an FPGA-based architecture for low-latency inference and real-time decoding. Evaluated on surface codes up to distance 7 under circuit-level noise at physical error rate p=10−3p=10^{-3}p=10−3, our decoder outperforms MWPM in decoding accuracy for both average-latency and max-latency settings. It reduces logical error rate by 40% at 1μs1μs1μs average latency, and by 13% under a strict 1μs1μs1μs deadline.
Especially in noisy intermediate-scale quantum (NISQ) devices, fault-tolerant quantum computing cannot be realized without quantum error correction. High error rates in quantum systems stemming from decoherence and gate defects call for effective and flexible QEC systems. This paper presents a novel FPGA-based architecture using dynamic reconfiguration to maximize hardware resources in response to real-time error patterns. Supporting bit-flip, phase-flip, and depolarizing faults among several error correction techniques guarantees high accuracy and little hardware overhead. Scaled for surface code distances up to and beyond, the design combines modular pipelines, adaptive hardware allocation, and error pattern detection. Designed on a Xilinx XC7A50T-CPG236 FPGA, the system showed notable gains over static architecture, averaging 30% lower latency and 20% less resource use overall. Low latency and high throughput are maintained while this dynamic technique enables flexible adaptability to several quantum error models. The outcomes show how well this structure may improve quantum error-correcting systems and enable the incorporation of QEC into useful quantum computer configurations.
Quantum error mitigation (QEM) is typically viewed as a suite of practical techniques for today's noisy intermediate-scale quantum devices, with limited relevance once fault-tolerant quantum computers become available. In this work, we challenge this conventional wisdom by showing that QEM can continue to provide substantial benefits in the era of quantum error correction (QEC), and in an even more efficient manner than it does on current devices. We introduce a framework for logical-level QEM that leverages soft information naturally produced by QEC decoders, requiring no additional data, hardware modifications, or runtime overhead beyond what QEC protocols already provide. Within this framework, we develop and analyze three logical-level QEM techniques: post-selection and runtime abort policies, probabilistic error cancellation, and zero-noise extrapolation. Our techniques reduce logical error rates by more than 100x while discarding fewer than 0.1% of shots; they also provide in situ characterization of logical channels for QEM protocols. As a proof of principle, we benchmark our approach using a surface-code architecture and two state-of-the-art decoders based on tensor-network contraction and minimum-weight perfect matching. We evaluate logical-level QEM on random Clifford circuits and molecular simulation algorithms and find that, compared to previous approaches relying on QEC only or QEC combined with QEM, we can achieve up to 87.4% spacetime overhead savings. Our results demonstrate that logical-level QEM with QEC decoder soft information can reliably improve logical performance, underscoring the efficiency and usefulness of QEM techniques for fault-tolerant quantum computers.
Fault-tolerant quantum computing (FTQC) relies on quantum error correction to suppress physical errors and preserve logical information at scale. In practice, however, performance is constrained not only by physical noise but also by the latency of classical decoders processing rapidly generated syndrome data. This challenge is exacerbated by hardware noise that is strong, heterogeneous, and nonstationary, as well as by the simulation-to-hardware distribution shift that can substantially degrade fixed neural decoders. We present QAdapt, a noise-adaptive neural pre-decoding framework for surface-code quantum error correction. QAdapt captures local spatiotemporal correlations in syndrome data, sequentially adapts to evolving noise conditions while mitigating catastrophic forgetting, and forwards the residual syndrome to a conventional global decoder. Across 110 synthetic out-of-distribution noise configurations for rotated surface-code memory circuits, QAdapt consistently reduces the logical error rate relative to the neural pre-decoding baseline. On Google's Willow benchmark data, without target-domain fine-tuning, it achieves reductions of up to 5.79 percent in logical error rate and 9.32 percent in backend decoding latency on the residual syndrome. These results demonstrate that QAdapt provides a practical and decoder-compatible approach to improving the robustness and backend decoding efficiency of quantum error correction under evolving hardware noise.