Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2602.11912

Millisecond-Scale Calibration and Benchmarking of Superconducting Qubits

Malthe A. Marciniak, Rune T. Birke, Johann B. Severin, Fabrizio Berritta, Daniel Kjær, Filip Nilsson, Smitha N. Themadath, Sangeeth Kallatt, James L. Webb, Kristoffer Bentsen, Tonny Madsen, Zhenhai Sun, Svend Krøjer, Christopher W. Warren, Jacob Hastrup, Morten Kjaergaard

quant-phSubmitted Feb 12, 2026• Announced Feb 13, 2026• 10 citations
arXivHTMLPDF

Abstract

Superconducting qubit parameters drift on sub-second timescales, motivating calibration and benchmarking techniques that can be executed on millisecond timescales. We demonstrate an on-FPGA workflow that co-locates pulse generation, data acquisition, analysis, and feed-forward, eliminating CPU round trips. Within this workflow, we introduce sparse-sampling and on-FPGA inference tools, including computationally efficient methods for estimation of exponential and sine-like response functions, as well as on-FPGA implementations of Nelder-Mead optimization and golden-section search. These methods enable low-latency primitives for readout calibration, spectroscopy, pulse-amplitude calibration, coherence estimation, and benchmarking. We deploy this toolset to estimate $T_1$ in 10 ms, optimize readout parameters in 100 ms, optimize pulse amplitudes in 1 ms, and perform Clifford randomized gate benchmarking in 107 ms on a flux-tunable superconducting transmon qubit. Running a closed-loop on-FPGA recalibration protocol continuously for 6 hours enables more than 74,000 consecutive recalibrations and yields gate errors that consistently retain better performance than the baseline initial calibration. Correlation analysis shows that recalibration suppresses coupling of gate error to control-parameter drift while preserving a coherence-linked performance. Finally, we quantify uncertainty versus time-to-decision under our sparse sampling approaches and identify optimal parameter regimes for efficient estimation of qubit and pulse parameters.

Comments
15 pages, 7 figures

Related papers

Efficient Qubit Calibration by Binary-Search Hamiltonian Tracking

Fabrizio Berritta, Jacob Benestad, Lukas Pahl +14 more

We present and experimentally implement a real-time protocol for calibrating the frequency of a resonantly driven qubit, achieving exponential scaling in calibration precision with the number of measurements, up to the limit imposed by decoherence. The real-time processing capabilities of a classical controller dynamically generate adaptive probing sequences for qubit-frequency estimation. Each probing evolution time and drive frequency are calculated to divide the prior probability distribution into two branches, following a locally optimal strategy that mimics a conventional binary search. The scheme does not require repeated measurements at the same setting, as it accounts for state preparation and measurement errors. Its use of a parametrized probability distribution favors numerical accuracy and computational speed. We show the efficacy of the algorithm by stabilizing a flux-tunable transmon qubit, leading to improved coherence and gate fidelity. As benchmarked by gate-set tomography, the field-programmable gate array (FPGA) powered control electronics partially mitigates non-Markovian noise, which is detrimental to quantum error correction. The mitigation is achieved by dynamically updating and feeding forward the qubit frequency. Our protocol highlights the importance of feedback in improving the calibration and stability of qubits subject to drift and can be readily applied to other qubit platforms.

arXiv:2501.05386•PRX Quantum•Jul 14, 2025•9 citations

Optimizing Superconducting Qubit Performance: A Theoretical Framework for Design, Analysis, and Calibration

Ram, Sirshi S, Muralikrishna Molli, Vamshi M. Katukuri +1 more

Designing a qubit architecture is one of the most critical challenges in achieving scalable and fault-tolerant quantum computing as the performance of a quantum computer is heavily dependent on the coherence times, connectivity and low noise environments. Superconducting qubits have emerged as a frontrunner among many competing technologies, primarily because of their speed of operations, relatively well-developed and offer a promising path toward scalability. Here, we address the challenges of optimizing superconducting qubit hardware through the development of a comprehensive theoretical framework that spans the entire process - from design to the calibration of hardware through quantum gate execution. We develop this framework in four key steps: circuit design, electromagnetic analysis, spectral analysis, and pulse sequencing with calibration. We first refine the qubit's core components - such as capacitance, Josephson junctions, and resonators - to set the foundation for strong performance. The electromagnetic analysis, using the Lumped Oscillator model, allows us to map out the capacitance matrix, ensuring that we minimize spectral dispersion while maximizing coherence times. Following this, we conduct spectral analysis to fine-tune the qubit's frequency spectrum and coherence properties, ensuring that the qubit parameters are optimized. Finally, we focus on pulse sequencing, including pulse-width optimization, DRAG optimization, and randomized benchmarking, to achieve high gate fidelity. We applied this framework to both Transmon and Fluxonium qubits, obtaining results that closely match those found in experimental studies. This work provides a detailed and practical approach to the design, optimization, and calibration of superconducting qubits, contributing to the broader effort to develop scalable quantum computing technologies.

arXiv:2501.17825•Jan 29, 2025•0 citations

Real-Time Adaptive Tracking of Fluctuating Relaxation Rates in Superconducting Qubits

Fabrizio Berritta, Jacob Benestad, Jan A. Krzywda +17 more

The fidelity of operations on a solid-state quantum processor is fundamentally bounded by environmental decoherence. Characterizing environmental fluctuations is challenging because the acquisition time of nonadaptive experimental protocols limits temporal precision and can average out rapid features of the underlying dynamics. Here, we overcome this temporal-resolution limit by 2 orders of magnitude using a field-programmable gate-array powered classical controller that adaptively and continuously tracks the relaxation-time fluctuations of two fixed-frequency superconducting transmon qubits, which exhibit average relaxation times of approximately 0.17 ms and occasionally exceed 0.5 ms. We report events in which the relaxation time switches by nearly an order of magnitude over timescales of just tens of milliseconds, rather than minutes or hours as previously reported. Our real-time Bayesian estimation protocol estimates relaxation times within a few milliseconds, close to the decoherence timescale itself. Our statistical analysis further suggests that some of these fast fluctuations arise from two-level systems switching at rates up to 10 Hz, 4 orders of magnitude faster than earlier reports. These results redefine the timescales relevant for calibration in superconducting quantum processing units, establish a reference for rapid relaxation-rate characterization in device screening, and improve our understanding of fast relaxation dynamics.

arXiv:2506.09576•Physical Review X•Jan 5, 2026•9 citations

Experimental characterization of superconducting transmon qubits

MOSE' GUERINI

Quantum information processing holds the promise of a paradigm shift in computational power for specific problem classes. While contemporary quantum processors operate in the Noisy Intermediate-Scale Quantum (NISQ) regime and remain highly susceptible to errors, ongoing experimental efforts on these near-term devices are crucial for advancing the underlying technology. Among the various hardware implementations, superconducting quantum circuits stand out as one of the most robust architectures for scalable quantum technologies. Nevertheless, the primary bottleneck in these systems is the fragility of quantum information: interactions with the environment inevitably perturb the quantum states, a phenomenon known as decoherence. This rapid loss of stored information imposes a fundamental limit on the time available to reliably execute computations on these devices. Within this context, this thesis focuses on the comprehensive experimental characterization of a planar chip featuring isolated, fixed-frequency superconducting transmon qubits. The measurements were conducted in a cryogenic environment, relying on a dilution refrigerator to maintain the device at millikelvin temperatures. To probe the quantum system under these conditions, custom measurement scripts were developed to operate state-of-the-art microwave control electronics (Keysight Quantum Control System), establishing full control over pulse generation, signal acquisition, and digital demodulation. The experimental workflow systematically mapped the physical properties of the device through a progressive series of characterization steps. Initial spectroscopic techniques probed the coupled resonator-qubit system, identifying its fundamental transition frequencies and relevant energy scales. Building upon these frequency-domain measurements, coherent control was achieved by calibrating resonant microwave pulses to drive single-qubit rotations, enabling the reliable preparation of the qubit in excited or coherent superposition states. Finally, specific time-domain protocols were implemented to evaluate the operational limits of the device. By executing standard pulse sequences, the characteristic decoherence metrics of the system, namely the longitudinal energy relaxation time (T1) and the inhomogeneous dephasing time (T2*), were successfully extracted, providing a quantitative assessment of the qubit's overall performance and establishing a baseline for future implementations of more advanced quantum control protocols.

•Apr 15, 2026•0 citations

Decoherence benchmarking of superconducting qubits

Jonathan Burnett, Andreas Bengtsson, Marco Scigliuzzo +4 more

Abstract We benchmark the decoherence of superconducting transmon qubits to examine the temporal stability of energy relaxation, dephasing, and qubit transition frequency. By collecting statistics during measurements spanning multiple days, we find the mean parameters $$\overline {T_1}$$ T 1 ¯ = 49 μs and $$\overline {T_2^ \ast }$$ T 2 * ¯ = 95 μs; however, both of these quantities fluctuate, explaining the need for frequent re-calibration in qubit setups. Our main finding is that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems (TLS). Through statistical analysis, we determine sub-millihertz switching rates of these TLS and observe the coherent coupling between an individual TLS and a transmon qubit. Finally, we find evidence that the qubit’s frequency stability produces a 0.8 ms limit on the pure dephasing which we also observe. These findings raise the need for performing qubit metrology to examine the reproducibility of qubit parameters, where these fluctuations could affect qubit gate fidelity.

arXiv:1901.04417•npj Quantum Information•Jun 26, 2019•397 citations

Adaptive Spectroscopy of Fast Two-Level-System Dynamics in Superconducting Qubits

Fabrizio Berritta, David Pahl, Lukas Pahl +15 more

Parasitic two-level-system (TLS) defects are a major source of energy relaxation and temporal instability in superconducting quantum processors. Our sub-second adaptive spectroscopy reveals telegraphic switching of TLSs with a characteristic timescale of a few seconds and spectral diffusion with diffusivity $D \approx 0.9~\mathrm{MHz}^2/\mathrm{s}$. These timescales are about $3 \times 10^2$ times faster than what is observed in conventional nonadaptive spectroscopy, which typically requires hours of measurement time. We resolve such fast dynamics on a field-programmable gate array (FPGA)-based controller that enables measurement of frequency- and time-resolved relaxations with sub-second temporal resolution in flux-tunable superconducting qubits. We observe similar defect dynamics across multiple qubits in independently fabricated devices measured in different laboratories. We correlate TLS-induced fluctuations with gate-level errors using randomized benchmarking. Our results reveal a previously inaccessible regime of frequency-resolved TLS dynamics and redefine the timescales relevant to TLS-aware characterization and calibration of superconducting quantum processors.

quant-pharXiv:2608.02086•Aug 4, 2026•2 citations
Superconducting qubit parameters drift on sub-second timescales, motivating calibration and benchmarking techniques that can be executed on millisecond timescales. We demonstrate an on-FPGA workflow that co-locates pulse generation, data acquisition, analysis, and feed-forward, eliminating CPU round trips. Within this workflow, we introduce sparse-sampling and on-FPGA inference tools, including computationally efficient methods for estimation of exponential and sine-like response functions, as well as on-FPGA implementations of Nelder-Mead optimization and golden-section search. These methods enable low-latency primitives for readout calibration, spectroscopy, pulse-amplitude calibration, coherence estimation, and benchmarking. We deploy this toolset to estimate T1T_1T1​ in 10 ms, optimize readout parameters in 100 ms, optimize pulse amplitudes in 1 ms, and perform Clifford randomized gate benchmarking in 107 ms on a flux-tunable superconducting transmon qubit. Running a closed-loop on-FPGA recalibration protocol continuously for 6 hours enables more than 74,000 consecutive recalibrations and yields gate errors that consistently retain better performance than the baseline initial calibration. Correlation analysis shows that recalibration suppresses coupling of gate error to control-parameter drift while preserving a coherence-linked performance. Finally, we quantify uncertainty versus time-to-decision under our sparse sampling approaches and identify optimal parameter regimes for efficient estimation of qubit and pulse parameters.
We present and experimentally implement a real-time protocol for calibrating the frequency of a resonantly driven qubit, achieving exponential scaling in calibration precision with the number of measurements, up to the limit imposed by decoherence. The real-time processing capabilities of a classical controller dynamically generate adaptive probing sequences for qubit-frequency estimation. Each probing evolution time and drive frequency are calculated to divide the prior probability distribution into two branches, following a locally optimal strategy that mimics a conventional binary search. The scheme does not require repeated measurements at the same setting, as it accounts for state preparation and measurement errors. Its use of a parametrized probability distribution favors numerical accuracy and computational speed. We show the efficacy of the algorithm by stabilizing a flux-tunable transmon qubit, leading to improved coherence and gate fidelity. As benchmarked by gate-set tomography, the field-programmable gate array (FPGA) powered control electronics partially mitigates non-Markovian noise, which is detrimental to quantum error correction. The mitigation is achieved by dynamically updating and feeding forward the qubit frequency. Our protocol highlights the importance of feedback in improving the calibration and stability of qubits subject to drift and can be readily applied to other qubit platforms.
Designing a qubit architecture is one of the most critical challenges in achieving scalable and fault-tolerant quantum computing as the performance of a quantum computer is heavily dependent on the coherence times, connectivity and low noise environments. Superconducting qubits have emerged as a frontrunner among many competing technologies, primarily because of their speed of operations, relatively well-developed and offer a promising path toward scalability. Here, we address the challenges of optimizing superconducting qubit hardware through the development of a comprehensive theoretical framework that spans the entire process - from design to the calibration of hardware through quantum gate execution. We develop this framework in four key steps: circuit design, electromagnetic analysis, spectral analysis, and pulse sequencing with calibration. We first refine the qubit's core components - such as capacitance, Josephson junctions, and resonators - to set the foundation for strong performance. The electromagnetic analysis, using the Lumped Oscillator model, allows us to map out the capacitance matrix, ensuring that we minimize spectral dispersion while maximizing coherence times. Following this, we conduct spectral analysis to fine-tune the qubit's frequency spectrum and coherence properties, ensuring that the qubit parameters are optimized. Finally, we focus on pulse sequencing, including pulse-width optimization, DRAG optimization, and randomized benchmarking, to achieve high gate fidelity. We applied this framework to both Transmon and Fluxonium qubits, obtaining results that closely match those found in experimental studies. This work provides a detailed and practical approach to the design, optimization, and calibration of superconducting qubits, contributing to the broader effort to develop scalable quantum computing technologies.
The fidelity of operations on a solid-state quantum processor is fundamentally bounded by environmental decoherence. Characterizing environmental fluctuations is challenging because the acquisition time of nonadaptive experimental protocols limits temporal precision and can average out rapid features of the underlying dynamics. Here, we overcome this temporal-resolution limit by 2 orders of magnitude using a field-programmable gate-array powered classical controller that adaptively and continuously tracks the relaxation-time fluctuations of two fixed-frequency superconducting transmon qubits, which exhibit average relaxation times of approximately 0.17 ms and occasionally exceed 0.5 ms. We report events in which the relaxation time switches by nearly an order of magnitude over timescales of just tens of milliseconds, rather than minutes or hours as previously reported. Our real-time Bayesian estimation protocol estimates relaxation times within a few milliseconds, close to the decoherence timescale itself. Our statistical analysis further suggests that some of these fast fluctuations arise from two-level systems switching at rates up to 10 Hz, 4 orders of magnitude faster than earlier reports. These results redefine the timescales relevant for calibration in superconducting quantum processing units, establish a reference for rapid relaxation-rate characterization in device screening, and improve our understanding of fast relaxation dynamics.
Quantum information processing holds the promise of a paradigm shift in computational power for specific problem classes. While contemporary quantum processors operate in the Noisy Intermediate-Scale Quantum (NISQ) regime and remain highly susceptible to errors, ongoing experimental efforts on these near-term devices are crucial for advancing the underlying technology. Among the various hardware implementations, superconducting quantum circuits stand out as one of the most robust architectures for scalable quantum technologies. Nevertheless, the primary bottleneck in these systems is the fragility of quantum information: interactions with the environment inevitably perturb the quantum states, a phenomenon known as decoherence. This rapid loss of stored information imposes a fundamental limit on the time available to reliably execute computations on these devices. Within this context, this thesis focuses on the comprehensive experimental characterization of a planar chip featuring isolated, fixed-frequency superconducting transmon qubits. The measurements were conducted in a cryogenic environment, relying on a dilution refrigerator to maintain the device at millikelvin temperatures. To probe the quantum system under these conditions, custom measurement scripts were developed to operate state-of-the-art microwave control electronics (Keysight Quantum Control System), establishing full control over pulse generation, signal acquisition, and digital demodulation. The experimental workflow systematically mapped the physical properties of the device through a progressive series of characterization steps. Initial spectroscopic techniques probed the coupled resonator-qubit system, identifying its fundamental transition frequencies and relevant energy scales. Building upon these frequency-domain measurements, coherent control was achieved by calibrating resonant microwave pulses to drive single-qubit rotations, enabling the reliable preparation of the qubit in excited or coherent superposition states. Finally, specific time-domain protocols were implemented to evaluate the operational limits of the device. By executing standard pulse sequences, the characteristic decoherence metrics of the system, namely the longitudinal energy relaxation time (T1) and the inhomogeneous dephasing time (T2*), were successfully extracted, providing a quantitative assessment of the qubit's overall performance and establishing a baseline for future implementations of more advanced quantum control protocols.
Abstract We benchmark the decoherence of superconducting transmon qubits to examine the temporal stability of energy relaxation, dephasing, and qubit transition frequency. By collecting statistics during measurements spanning multiple days, we find the mean parameters T1‾\overline {T_1}T1​​ T 1 ¯ = 49 μs and T2∗‾\overline {T_2^ \ast }T2∗​​ T 2 * ¯ = 95 μs; however, both of these quantities fluctuate, explaining the need for frequent re-calibration in qubit setups. Our main finding is that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems (TLS). Through statistical analysis, we determine sub-millihertz switching rates of these TLS and observe the coherent coupling between an individual TLS and a transmon qubit. Finally, we find evidence that the qubit’s frequency stability produces a 0.8 ms limit on the pure dephasing which we also observe. These findings raise the need for performing qubit metrology to examine the reproducibility of qubit parameters, where these fluctuations could affect qubit gate fidelity.
Parasitic two-level-system (TLS) defects are a major source of energy relaxation and temporal instability in superconducting quantum processors. Our sub-second adaptive spectroscopy reveals telegraphic switching of TLSs with a characteristic timescale of a few seconds and spectral diffusion with diffusivity D≈0.9 MHz2/sD \approx 0.9~\mathrm{MHz}^2/\mathrm{s}D≈0.9 MHz2/s. These timescales are about 3×1023 \times 10^23×102 times faster than what is observed in conventional nonadaptive spectroscopy, which typically requires hours of measurement time. We resolve such fast dynamics on a field-programmable gate array (FPGA)-based controller that enables measurement of frequency- and time-resolved relaxations with sub-second temporal resolution in flux-tunable superconducting qubits. We observe similar defect dynamics across multiple qubits in independently fabricated devices measured in different laboratories. We correlate TLS-induced fluctuations with gate-level errors using randomized benchmarking. Our results reveal a previously inaccessible regime of frequency-resolved TLS dynamics and redefine the timescales relevant to TLS-aware characterization and calibration of superconducting quantum processors.