Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2602.09364 · Physical Review Applied

Narrow-linewidth Brillouin laser for a two-photon rubidium frequency standard

Anonymous, River Beard, Andrei Isichenko, Kaikai Liu, Daniel J. Blumenthal, Seth E. Erickson, Kaleb Campbell, Sean Krzyzewski

Published Jul 14, 2026• 0 citations
arXivHTMLPDF

Abstract

High-precision, portable, and deployable frequency standards are required for modern navigation and communication technologies. Optical frequency standards are attractive for their improved stability over their microwave counterparts; however, increased complexities have anchored them in the laboratory. Sacrificing the sensitivity of the most stable optical clocks has led to the recent development of deployable and portable optical frequency standards, leveraging hot atomic or molecular vapor. The short-term limit for a majority of previous reports on two-photon rubidium standards is either the shot-noise or intermodulation limit hindering the 1 s fractional frequency stability to around 1 × 10 − 13 . The answer for the shot-noise limit is to increase optical power and collected fluorescence, while the intermodulation limit solution requires improvements in laser linewidth, stimulated Brillouin scattering (SBS) lasers are known to reduce frequency noise, suppressing noise of the pump laser. We investigate an optical frequency standard based on the two-photon transition in Rb 87 probed with a narrow photonic integrated circuit SBS laser with a quality factor over 130 million and instantaneous linewidth < 10 Hz . The use of a narrow clock laser coupled with operating at higher optical intensities yielded clock instabilities of 2 × 10 − 14 at 1 s, currently the best reported short-term stability for a two-photon rubidium optical frequency standard.

DOI
10.1103/vgf7-kjlg

Related papers

Characteristics of wavelength standard system based on two-photon transition in 87Rb atoms

Peixuan Song, Yali Liu, Wei Li

Optical wavelength standards, based on the optical transitions of atoms or molecules, provide ultra-high precision frequency references and are the core technology of next-generation optical clocks. Their stability far exceeds that of the microwave frequency range, laying the foundation for precision metrology and cutting-edge scientific research. The wavelength standard device based on the 5S1/2-5D3/2 hyperfine level two-photon transition of 87Rb atoms exhibits significant advantages such as no Doppler broadening, high signal-to-noise ratio (SNR), and potential for miniaturization and chip integration, showing important application potential in precision measurement fields like rubidium atomic clocks and optical communication. In this paper, an experimental setup for two-photon transition was constructed using an external cavity diode laser (ECDL), achieving stable locking of the 778 nm wavelength by modulating the laser current. The effects of the temperature and length of the atomic vapor cell on the blue fluorescence linewidth, SNR, and frequency stability were systematically studied, further optimizing the system. By using an atomic vapor cell designed at Brewster's angle, optical reflection loss was effectively reduced, compensating for the impact of shortened optical path on frequency stability in miniaturized atomic vapor cells. This provides new research directions and performance enhancement solutions for the miniaturization and chip integration of two-photon transition systems. In the improved system, a Brewster-angle glass vapor cell with a length of 30 mm was used and heated to 110°C, achieving a linewidth of 1.69 MHz full width at half maximum (FWHM) and a SNR of 20 dB. The system demonstrated a instability of 9.86×10-11 over a 1-second averaging time and a minimum instability of 5.79×10-11 over a 5.7-second averaging time. This achievement provides key technological support for the practical application of the next generation of miniaturized optical atomic clocks, with the potential for widespread use in portable metrology equipment and space science through integrated design and noise suppression optimization in the future.

Applied Optics and Photonics China (AOPC)•Oct 28, 2025•0 citations

Short-term stability of a microcell optical reference based on the Rb atom two-photon transition at 778 nm

Martin Callejo, Andrei Mursa, Rémy Vicarini +5 more

We report on the development and short-term stability characterization of an optical frequency reference based on the spectroscopy of the rubidium two-photon transition at 778 nm in a microfabricated vapor cell. When compared against a 778 nm reference signal extracted from a frequency-doubled cavity-stabilized telecom laser, the short-term stability of the microcell frequency standard is 3.5×10−13τ−1/2 until 200 s, in good agreement with a phase noise level of +43dBrad2/Hz at 1 Hz offset frequency. The two main contributions to the short-term stability of the microcell reference are currently the photon shot noise and the intermodulation effect induced by the laser frequency noise. Retaining a relevant margin of progress, these results show the interest of this spectroscopic approach for the demonstration of high-stability miniaturized optical vapor cell clocks. Such clocks are poised to be highly beneficial for applications in navigation, communications, and metrology.

arXiv:2407.00841•Journal of the Optical Society of America B•Nov 22, 2024•15 citations

Compact Optical Atomic Clock Based on a Two-Photon Transition in Rubidium

Kyle W. Martin, Gretchen R. Phelps, N. Lemke +7 more

Optical frequency standards surpass their microwave counterparts in both stability and accuracy, yet they are often bulky, power-hungry, and unable to operate outside of a well-controlled laboratory environment. Leveraging a two-photon transition in ${}^{87}$Rb vapor and recent advances in fiber frequency combs, the authors build an optical clock to beat the current portable standards, with an architecture that can be made compact and low-power. These results point the way to a real-world optical frequency standard of even higher stability, for applications such as satellite navigation.

arXiv:1903.11231•Physical Review Applied•Jan 18, 2018•178 citations

A Portable Dual-Color Two-Photon Rubidium Optical Frequency Standard

Sarah Scholten, Emily Ahern, Clayton R. Locke +8 more

Portable atomic clocks are essential in a wide variety of applications, most notably in the operation of global navigation satellite systems. Existing portable atomic clocks utilizing microwave-based interrogation schemes are now routinely eclipsed by the next generation of atomic frequency standards based on optical interrogation. While optical frequency standards demonstrate greatly improved frequency stability, they have only recently reached a level of technical maturity required to demonstrate this improved performance outside of well curated laboratory environments. Here, we demonstrate a fully autonomous and portable optical frequency standard based on an efficient dual-color excitation of the $5S_{1/2}\rightarrow5D_{5/2}$ two-photon transition in $^{87}$Rb. The standard utilizes a combination of robust, highly developed commercial-off-the-shelf telecommunications technologies and a fully integrated portable optical frequency comb, providing the optical and microwave outputs vital for interfacing with existing electronic systems and infrastructure. The system demonstrates a fractional frequency stability of $1.9\times10^{-13}$ at 1s of integration time, reaching $3.5\times10^{-15}$ at 8000s of integration time without the need for drift removal. This portable demonstrator unit marks a significant achievement in the development of Rb optical atomic frequency standards, and for the deployment of optical atomic frequency standards outside of the laboratory.

arXiv:2609.08083•Sep 8, 2026•0 citations

Compact 780-nm Rb optical clock

Zhendong Chen, Tianyu Liu, Ruoao Yang +9 more

We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.

arXiv:2501.01826•Physical Review Applied•Nov 24, 2025•6 citations

Beam geometry and temperature effects on the frequency stability of a 8 7 Rb two-photon optical frequency standard

Jiongyang Zhang, Yuhua Xiao, Ji Wang +8 more

Abstract High-precision time–frequency standards play vital roles in fundamental physics, geodesy, navigation, and communication. This paper reports experimental progress on an optical frequency standard (OFS) based on the 5S 1/2 → 5D 5/2 two-photon transition in 87 Rb. A 1556 nm communication-band laser is frequency-doubled to generate a 778.1 nm clock laser, which excites Rb atoms via counter-propagating beams. The 420 nm fluorescence is collected to obtain a high signal-to-noise-ratio transition spectrum. The effects of laser power and vapor cell temperature on the fluorescence intensity were systematically investigated. The impact of laser beam waist and atomic collisions on frequency shifts was analyzed. Results show that replacing a tightly focused beam with a large collimated one reduced the laser power-induced frequency shift by two orders of magnitude. Furthermore, increasing the vapor temperature enhances collision-induced frequency shifts, adversely affecting long-term stability. Under optimized conditions, the system achieved a short-term fractional frequency stability of 2.6 × 10 −13 at 1 s, reaching 5.3 × 10 −15 at 10 000 s. This work lays a critical technical foundation for the development of compact and high-performance OFSs.

Journal of Physics B Atomic Molecular and Optical Physics•May 5, 2026•1 citation
High-precision, portable, and deployable frequency standards are required for modern navigation and communication technologies. Optical frequency standards are attractive for their improved stability over their microwave counterparts; however, increased complexities have anchored them in the laboratory. Sacrificing the sensitivity of the most stable optical clocks has led to the recent development of deployable and portable optical frequency standards, leveraging hot atomic or molecular vapor. The short-term limit for a majority of previous reports on two-photon rubidium standards is either the shot-noise or intermodulation limit hindering the 1 s fractional frequency stability to around 1 × 10 − 13 . The answer for the shot-noise limit is to increase optical power and collected fluorescence, while the intermodulation limit solution requires improvements in laser linewidth, stimulated Brillouin scattering (SBS) lasers are known to reduce frequency noise, suppressing noise of the pump laser. We investigate an optical frequency standard based on the two-photon transition in Rb 87 probed with a narrow photonic integrated circuit SBS laser with a quality factor over 130 million and instantaneous linewidth < 10 Hz . The use of a narrow clock laser coupled with operating at higher optical intensities yielded clock instabilities of 2 × 10 − 14 at 1 s, currently the best reported short-term stability for a two-photon rubidium optical frequency standard.
Optical wavelength standards, based on the optical transitions of atoms or molecules, provide ultra-high precision frequency references and are the core technology of next-generation optical clocks. Their stability far exceeds that of the microwave frequency range, laying the foundation for precision metrology and cutting-edge scientific research. The wavelength standard device based on the 5S1/2-5D3/2 hyperfine level two-photon transition of 87Rb atoms exhibits significant advantages such as no Doppler broadening, high signal-to-noise ratio (SNR), and potential for miniaturization and chip integration, showing important application potential in precision measurement fields like rubidium atomic clocks and optical communication. In this paper, an experimental setup for two-photon transition was constructed using an external cavity diode laser (ECDL), achieving stable locking of the 778 nm wavelength by modulating the laser current. The effects of the temperature and length of the atomic vapor cell on the blue fluorescence linewidth, SNR, and frequency stability were systematically studied, further optimizing the system. By using an atomic vapor cell designed at Brewster's angle, optical reflection loss was effectively reduced, compensating for the impact of shortened optical path on frequency stability in miniaturized atomic vapor cells. This provides new research directions and performance enhancement solutions for the miniaturization and chip integration of two-photon transition systems. In the improved system, a Brewster-angle glass vapor cell with a length of 30 mm was used and heated to 110°C, achieving a linewidth of 1.69 MHz full width at half maximum (FWHM) and a SNR of 20 dB. The system demonstrated a instability of 9.86×10-11 over a 1-second averaging time and a minimum instability of 5.79×10-11 over a 5.7-second averaging time. This achievement provides key technological support for the practical application of the next generation of miniaturized optical atomic clocks, with the potential for widespread use in portable metrology equipment and space science through integrated design and noise suppression optimization in the future.
We report on the development and short-term stability characterization of an optical frequency reference based on the spectroscopy of the rubidium two-photon transition at 778 nm in a microfabricated vapor cell. When compared against a 778 nm reference signal extracted from a frequency-doubled cavity-stabilized telecom laser, the short-term stability of the microcell frequency standard is 3.5×10−13τ−1/2 until 200 s, in good agreement with a phase noise level of +43dBrad2/Hz at 1 Hz offset frequency. The two main contributions to the short-term stability of the microcell reference are currently the photon shot noise and the intermodulation effect induced by the laser frequency noise. Retaining a relevant margin of progress, these results show the interest of this spectroscopic approach for the demonstration of high-stability miniaturized optical vapor cell clocks. Such clocks are poised to be highly beneficial for applications in navigation, communications, and metrology.
Optical frequency standards surpass their microwave counterparts in both stability and accuracy, yet they are often bulky, power-hungry, and unable to operate outside of a well-controlled laboratory environment. Leveraging a two-photon transition in 87{}^{87}87Rb vapor and recent advances in fiber frequency combs, the authors build an optical clock to beat the current portable standards, with an architecture that can be made compact and low-power. These results point the way to a real-world optical frequency standard of even higher stability, for applications such as satellite navigation.
Portable atomic clocks are essential in a wide variety of applications, most notably in the operation of global navigation satellite systems. Existing portable atomic clocks utilizing microwave-based interrogation schemes are now routinely eclipsed by the next generation of atomic frequency standards based on optical interrogation. While optical frequency standards demonstrate greatly improved frequency stability, they have only recently reached a level of technical maturity required to demonstrate this improved performance outside of well curated laboratory environments. Here, we demonstrate a fully autonomous and portable optical frequency standard based on an efficient dual-color excitation of the 5S1/2→5D5/25S_{1/2}\rightarrow5D_{5/2}5S1/2​→5D5/2​ two-photon transition in 87^{87}87Rb. The standard utilizes a combination of robust, highly developed commercial-off-the-shelf telecommunications technologies and a fully integrated portable optical frequency comb, providing the optical and microwave outputs vital for interfacing with existing electronic systems and infrastructure. The system demonstrates a fractional frequency stability of 1.9×10−131.9\times10^{-13}1.9×10−13 at 1s of integration time, reaching 3.5×10−153.5\times10^{-15}3.5×10−15 at 8000s of integration time without the need for drift removal. This portable demonstrator unit marks a significant achievement in the development of Rb optical atomic frequency standards, and for the deployment of optical atomic frequency standards outside of the laboratory.
We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.
Abstract High-precision time–frequency standards play vital roles in fundamental physics, geodesy, navigation, and communication. This paper reports experimental progress on an optical frequency standard (OFS) based on the 5S 1/2 → 5D 5/2 two-photon transition in 87 Rb. A 1556 nm communication-band laser is frequency-doubled to generate a 778.1 nm clock laser, which excites Rb atoms via counter-propagating beams. The 420 nm fluorescence is collected to obtain a high signal-to-noise-ratio transition spectrum. The effects of laser power and vapor cell temperature on the fluorescence intensity were systematically investigated. The impact of laser beam waist and atomic collisions on frequency shifts was analyzed. Results show that replacing a tightly focused beam with a large collimated one reduced the laser power-induced frequency shift by two orders of magnitude. Furthermore, increasing the vapor temperature enhances collision-induced frequency shifts, adversely affecting long-term stability. Under optimized conditions, the system achieved a short-term fractional frequency stability of 2.6 × 10 −13 at 1 s, reaching 5.3 × 10 −15 at 10 000 s. This work lays a critical technical foundation for the development of compact and high-performance OFSs.