Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2602.08526 · Physical Review A

Intelligent Control of Collisional Architectures for Deterministic Multipartite State Engineering

Duc-Kha Vu, Minh Tam Nguyen, Özgür E. Müstecaplıoğlu, Fatih Ozaydin

quant-phSubmitted Feb 9, 2026• Announced Feb 10, 2026• 2 citations
arXivHTMLPDF

Abstract

Designing scalable, noise-tolerant control protocols for multipartite entanglement is a central challenge for quantum technologies, and it naturally calls for \emph{algorithmic} synthesis of interaction parameters rather than handcrafted gate sequences. Here we introduce an intelligent, constraint-aware control framework for deterministic generation of symmetric Dicke states $|D_n^{(m)}\rangle$ in repeated-interaction (collision-model) architectures. The protocol employs excitation-preserving partial-SWAP collisions between two disjoint qubit registers, mediated by $m$ ancillary ``shuttle'' qubits, and poses Dicke-state preparation as a \emph{closed-loop design} problem: given the target $(n,m)$, automatically infer collision strengths that maximize fidelity under practical constraints. Concretely, we formulate a two-parameter, bound-constrained optimization over intra-register and shuttle--register collision angles and solve it using a multi-start strategy with L-BFGS-B, yielding a reproducible controller prescription (optimized $γ_{\mathrm{in}}$, $γ_{\mathrm{sh}}$, and minimal-round convergence points) for each target. This removes the need for projective measurements and extends collisional entanglement generation beyond the single-excitation (W-state) sector to arbitrary $m$. Crucially, we optimize \emph{within} imperfect collisional dynamics where errors act throughout the sequence, including stochastic interaction dropouts (missing collisions) and standard decoherence channels. Strikingly, across wide error ranges the optimized controller preserves high preparation fidelity; imperfections manifest primarily as a modest increase in the required number of collision rounds. This behavior reflects a tunable competition in which noise suppresses correlations while properly chosen collisions continuously replenish them, allowing the control algorithm to trade time for fidelity.

Comments
10 pages, 5 figures, comments are welcome

Related papers

Robust multipartite entanglement generation via a collision model

Barış Çakmak, Steve Campbell, Bassano Vacchini +2 more

We examine a simple scheme to generate genuine multipartite entangled states across disjoint qubit registers. We employ a shuttle qubit that is sequentially coupled, in an energy preserving manner, to the constituents within each register through rounds of interactions. We establish that stable $W$-type entanglement can be generated among all qubits within the registers. Furthermore, we find that the entanglement is sensitive to how the shuttle is treated, showing that a significantly larger degree is achieved by performing projective measurements on it. Finally, we assess the resilience of this entanglement generation protocol to several types of noise and imperfections, showing that it is remarkably robust.

arXiv:1803.05243•Physical Review A•Jan 14, 2019•45 citations

Data and code for collision-model Dicke-state preparation: depth-fidelity frontiers, circuit costs, and superconducting-processor measurements

Duc-Kha Vu, Minh Tam Nguyen, Şahin K. Özdemir +2 more

Dicke states are multipartite entangled states in which a fixed number of quantum excitations is coherently shared among many qubits. Originally introduced in the context of cooperative emission and superradiance, they are now important resources for quantum sensing, networking, and collective quantum phenomena. Preparing prescribed Dicke states with high fidelity, however, remains challenging, particularly as the system size and excitation number increase. Here we present an open dataset and accompanying code for preparing Dicke states using a collision-based quantum protocol. The dataset covers systems from five to fourteen qubits over a broad range of excitation numbers and records how the best-found noiseless preparation fidelity changes with circuit depth. It also provides circuit-resource estimates and experimental measurements for selected states on the 54-qubit IQM Emerald superconducting processor. The accompanying code reproduces the processed data and validation checks, providing a reusable benchmark for studying the trade-off between state-preparation fidelity, circuit cost, and hardware noise.

quant-pharXiv:2608.30176•Sep 1, 2026•0 citations

Lifting connectivity bottlenecks in superconducting quantum processors via enriched native two-qubit gates

Hanyi Wang, Jingzhe Guo, Lijun Sun +17 more

Limited qubit connectivity is a central architectural constraint in superconducting quantum processors, whose planar layouts require additional gates to mediate interactions between distant qubits. Here, we use the AshN control scheme, where rich two-qubit control on every nearest-neighbour pair allows a logical interaction and the required qubit routing to be merged into a single native operation, effectively transforming a sparse hardware graph into a more connected computational architecture. For the benchmark instances studied, the resulting synthesis capability enables reliable execution on constrained one- and two-dimensional lattices, with compiled two-qubit gate counts approaching those of an all-to-all-connected reference. Across seven benchmark circuits on one- and two-dimensional topologies, the AshN-based implementation achieves geometric-mean reductions of $45.2\%$ and $43.7\%$ in two-qubit gate count compared with controlled-Z-based compilation, respectively. Using AshN gates, we prepare an eight-qubit two-excitation Dicke state with a fidelity of $0.736$ and certify its genuine multipartite entanglement using a fully positive-partial-transpose witness, whereas the same witness does not certify entanglement for the CZ-based implementation. The state fidelity and entanglement certification remain robust across the tested lattice configurations, including those with up to three connectivity defects. Our work establishes native-gate engineering as a practical approach to mitigating connectivity constraints.

quant-pharXiv:2608.24084•Aug 26, 2026•0 citations

Singularity-free dynamical invariants-based quantum control

Ritik Sareen, Akram Youssry, Alberto Peruzzo

Abstract State preparation is a cornerstone of quantum technologies, underpinning applications in computation, communication, and sensing. Its importance becomes even more pronounced in non-Markovian open quantum systems, where environmental memory and model uncertainties pose significant challenges to achieving high-fidelity control. Invariant-based inverse engineering provides a principled framework for synthesizing analytic control fields, yet existing parameterizations often lead to experimentally infeasible, singular pulses and are limited to simplified noise models such as those of Lindblad form. Here, we introduce a generalized invariant-based protocol for finite-dimensional state preparation under arbitrary noise conditions. We transform the finite-dimensional control problem into the equivalent problem for a single-qubit, by restricting the dynamics to a designed SU(2) subspace. The control protocol then proceeds in two-stages: first, we construct a family of bounded pulses that achieve perfect state preparation in a closed system; second, we identify the optimal member of this family that minimizes the effect of noise. The framework accommodates both (i) characterized noise, enabling noise-aware control synthesis, and (ii) uncharacterized noise, where a noise-agnostic variant preserves robustness without requiring a master-equation description. Numerical simulations demonstrate high-fidelity state preparation across diverse targets while producing smooth, hardware-feasible control fields. This singularity-free framework extends invariant-based control to realistic open-system regimes, providing a versatile route toward robust quantum state engineering on NISQ hardware and other platforms exhibiting non-Markovian dynamics.

arXiv:2510.15340•npj Quantum Information•Aug 5, 2026•1 citation

Detection and Inhibition of Decoherence Through Collisions: A dynamical approach

Sagnik Chakraborty, Srijon Ghosh, Federico Amato +3 more

Quantum systems are intrinsically fragile and highly vulnerable to environmental noise, making the preservation of quantum states one of the fundamental challenges in realizing practical quantum technologies. We propose two noise-agnostic quantum state protection protocols based on a collisional model. The first protocol preserves quantum states of qubits without requiring complete prior knowledge of the underlying noise dynamics, and the second even protects a logical qubit under similar circumstances. These protocols provide robust protection for arbitrary single-qubit and entangled states against general noise processes. Furthermore, their capability to safeguard quantum states with an arbitrary number of qubits enhances the reliability, robustness, and scalability of emerging quantum architectures. These results establish the proposed framework as a promising approach for practical quantum information processing.

quant-pharXiv:2610.39657•Oct 30, 2026•0 citations

Harnessing subspace controllability: Dynamical generation of Dicke states in Heisenberg-coupled qubit arrays with a single local control

Vladimir M. Stojanovic, Tommaso Calarco, Andrea Muratori

We explore the feasibility of realizing Dicke states in qubit arrays with always-on isotropic Heisenberg coupling between adjacent qubits, assuming a single Zeeman-type control acting in the $z$ direction on an actuator qubit. The Lie-algebraic criteria of controllability imply that such an array is not completely controllable, but satisfies the conditions for subspace controllability on any subspace with a fixed number of excitations. Therefore, a qubit array described by the model under consideration is state-to-state controllable for an arbitrary choice of initial and final states that have the same Hamming weight. This limited controllability is exploited here for the time-efficient dynamical generation of an $a$-excitation Dicke state $|D^{N}_{a}\rangle$ ($a=1,2,\ldots, N-1$) in a linear array with $N$ qubits starting from a generic Hamming-weight-$a$ product state. To dynamically generate the desired Dicke states -- including $W$ states $|W_{N}\rangle$ as their special ($a=1$) case -- in the shortest possible time with a single local $Z$ control, we employ an optimal-control scheme based on the {\em dressed chopped random basis} (dCRAB) algorithm. We optimize the target-state fidelity over the expansion coefficients of smoothly-varying control fields in a truncated random Fourier basis; this is done by combining Nelder-Mead-type local optimizations with the multistart-based clustering algorithm that facilitates searches for global extrema. In this manner, we obtain the optimal control fields for Dicke-state preparation in arrays with up to $9$ qubits. Based on our numerical results, we find that the shortest possible state-preparation times scale as $\mathcal{O}(N^{2.08})$ for $W$ states and $\mathcal{O}(N^{1.78})$ for $a=2$ Dicke states.

quant-pharXiv:2512.24406•Physical Review Research•Dec 31, 2025•2 citations
Designing scalable, noise-tolerant control protocols for multipartite entanglement is a central challenge for quantum technologies, and it naturally calls for \emph{algorithmic} synthesis of interaction parameters rather than handcrafted gate sequences. Here we introduce an intelligent, constraint-aware control framework for deterministic generation of symmetric Dicke states ∣Dn(m)⟩|D_n^{(m)}\rangle∣Dn(m)​⟩ in repeated-interaction (collision-model) architectures. The protocol employs excitation-preserving partial-SWAP collisions between two disjoint qubit registers, mediated by mmm ancillary ``shuttle'' qubits, and poses Dicke-state preparation as a \emph{closed-loop design} problem: given the target (n,m)(n,m)(n,m), automatically infer collision strengths that maximize fidelity under practical constraints. Concretely, we formulate a two-parameter, bound-constrained optimization over intra-register and shuttle--register collision angles and solve it using a multi-start strategy with L-BFGS-B, yielding a reproducible controller prescription (optimized γinγ_{\mathrm{in}}γin​, γshγ_{\mathrm{sh}}γsh​, and minimal-round convergence points) for each target. This removes the need for projective measurements and extends collisional entanglement generation beyond the single-excitation (W-state) sector to arbitrary mmm. Crucially, we optimize \emph{within} imperfect collisional dynamics where errors act throughout the sequence, including stochastic interaction dropouts (missing collisions) and standard decoherence channels. Strikingly, across wide error ranges the optimized controller preserves high preparation fidelity; imperfections manifest primarily as a modest increase in the required number of collision rounds. This behavior reflects a tunable competition in which noise suppresses correlations while properly chosen collisions continuously replenish them, allowing the control algorithm to trade time for fidelity.
We examine a simple scheme to generate genuine multipartite entangled states across disjoint qubit registers. We employ a shuttle qubit that is sequentially coupled, in an energy preserving manner, to the constituents within each register through rounds of interactions. We establish that stable WWW-type entanglement can be generated among all qubits within the registers. Furthermore, we find that the entanglement is sensitive to how the shuttle is treated, showing that a significantly larger degree is achieved by performing projective measurements on it. Finally, we assess the resilience of this entanglement generation protocol to several types of noise and imperfections, showing that it is remarkably robust.
Dicke states are multipartite entangled states in which a fixed number of quantum excitations is coherently shared among many qubits. Originally introduced in the context of cooperative emission and superradiance, they are now important resources for quantum sensing, networking, and collective quantum phenomena. Preparing prescribed Dicke states with high fidelity, however, remains challenging, particularly as the system size and excitation number increase. Here we present an open dataset and accompanying code for preparing Dicke states using a collision-based quantum protocol. The dataset covers systems from five to fourteen qubits over a broad range of excitation numbers and records how the best-found noiseless preparation fidelity changes with circuit depth. It also provides circuit-resource estimates and experimental measurements for selected states on the 54-qubit IQM Emerald superconducting processor. The accompanying code reproduces the processed data and validation checks, providing a reusable benchmark for studying the trade-off between state-preparation fidelity, circuit cost, and hardware noise.
Limited qubit connectivity is a central architectural constraint in superconducting quantum processors, whose planar layouts require additional gates to mediate interactions between distant qubits. Here, we use the AshN control scheme, where rich two-qubit control on every nearest-neighbour pair allows a logical interaction and the required qubit routing to be merged into a single native operation, effectively transforming a sparse hardware graph into a more connected computational architecture. For the benchmark instances studied, the resulting synthesis capability enables reliable execution on constrained one- and two-dimensional lattices, with compiled two-qubit gate counts approaching those of an all-to-all-connected reference. Across seven benchmark circuits on one- and two-dimensional topologies, the AshN-based implementation achieves geometric-mean reductions of 45.2%45.2\%45.2% and 43.7%43.7\%43.7% in two-qubit gate count compared with controlled-Z-based compilation, respectively. Using AshN gates, we prepare an eight-qubit two-excitation Dicke state with a fidelity of 0.7360.7360.736 and certify its genuine multipartite entanglement using a fully positive-partial-transpose witness, whereas the same witness does not certify entanglement for the CZ-based implementation. The state fidelity and entanglement certification remain robust across the tested lattice configurations, including those with up to three connectivity defects. Our work establishes native-gate engineering as a practical approach to mitigating connectivity constraints.
Abstract State preparation is a cornerstone of quantum technologies, underpinning applications in computation, communication, and sensing. Its importance becomes even more pronounced in non-Markovian open quantum systems, where environmental memory and model uncertainties pose significant challenges to achieving high-fidelity control. Invariant-based inverse engineering provides a principled framework for synthesizing analytic control fields, yet existing parameterizations often lead to experimentally infeasible, singular pulses and are limited to simplified noise models such as those of Lindblad form. Here, we introduce a generalized invariant-based protocol for finite-dimensional state preparation under arbitrary noise conditions. We transform the finite-dimensional control problem into the equivalent problem for a single-qubit, by restricting the dynamics to a designed SU(2) subspace. The control protocol then proceeds in two-stages: first, we construct a family of bounded pulses that achieve perfect state preparation in a closed system; second, we identify the optimal member of this family that minimizes the effect of noise. The framework accommodates both (i) characterized noise, enabling noise-aware control synthesis, and (ii) uncharacterized noise, where a noise-agnostic variant preserves robustness without requiring a master-equation description. Numerical simulations demonstrate high-fidelity state preparation across diverse targets while producing smooth, hardware-feasible control fields. This singularity-free framework extends invariant-based control to realistic open-system regimes, providing a versatile route toward robust quantum state engineering on NISQ hardware and other platforms exhibiting non-Markovian dynamics.
Quantum systems are intrinsically fragile and highly vulnerable to environmental noise, making the preservation of quantum states one of the fundamental challenges in realizing practical quantum technologies. We propose two noise-agnostic quantum state protection protocols based on a collisional model. The first protocol preserves quantum states of qubits without requiring complete prior knowledge of the underlying noise dynamics, and the second even protects a logical qubit under similar circumstances. These protocols provide robust protection for arbitrary single-qubit and entangled states against general noise processes. Furthermore, their capability to safeguard quantum states with an arbitrary number of qubits enhances the reliability, robustness, and scalability of emerging quantum architectures. These results establish the proposed framework as a promising approach for practical quantum information processing.
We explore the feasibility of realizing Dicke states in qubit arrays with always-on isotropic Heisenberg coupling between adjacent qubits, assuming a single Zeeman-type control acting in the zzz direction on an actuator qubit. The Lie-algebraic criteria of controllability imply that such an array is not completely controllable, but satisfies the conditions for subspace controllability on any subspace with a fixed number of excitations. Therefore, a qubit array described by the model under consideration is state-to-state controllable for an arbitrary choice of initial and final states that have the same Hamming weight. This limited controllability is exploited here for the time-efficient dynamical generation of an aaa-excitation Dicke state ∣DaN⟩|D^{N}_{a}\rangle∣DaN​⟩ (a=1,2,…,N−1a=1,2,\ldots, N-1a=1,2,…,N−1) in a linear array with NNN qubits starting from a generic Hamming-weight-aaa product state. To dynamically generate the desired Dicke states -- including WWW states ∣WN⟩|W_{N}\rangle∣WN​⟩ as their special (a=1a=1a=1) case -- in the shortest possible time with a single local ZZZ control, we employ an optimal-control scheme based on the {\em dressed chopped random basis} (dCRAB) algorithm. We optimize the target-state fidelity over the expansion coefficients of smoothly-varying control fields in a truncated random Fourier basis; this is done by combining Nelder-Mead-type local optimizations with the multistart-based clustering algorithm that facilitates searches for global extrema. In this manner, we obtain the optimal control fields for Dicke-state preparation in arrays with up to 999 qubits. Based on our numerical results, we find that the shortest possible state-preparation times scale as O(N2.08)\mathcal{O}(N^{2.08})O(N2.08) for WWW states and O(N1.78)\mathcal{O}(N^{1.78})O(N1.78) for a=2a=2a=2 Dicke states.