High-Q bosonic memories are central to hardware-efficient quantum error correction, but their isolation makes fast, high-fidelity reset a persistent bottleneck. Existing approaches either rely on weak intermode cross-Kerr conversion or on measurement-based sequences with substantial latency. Here we demonstrate a hardware-efficient Rabi-Driven Reset (RDR) that implements continuous, measurement-free cooling of a superconducting cavity mode. A strong resonant Rabi drive on a transmon, together with sideband drives on the memory and readout modes detuned by the Rabi frequency, converts the dispersive interaction into an effective Jaynes-Cummings coupling between the qubit dressed states and each mode. This realizes a tunable dissipation channel from the memory to the cold readout bath. Crucially, the engineered coupling scales with the qubit-mode dispersive interaction and the drive amplitude, rather than with the intermode cross-Kerr, enabling fast cooling even in very weakly coupled architectures that deliberately suppress direct mode-mode coupling. We demonstrate RDR of a single photon with a decay time of $1.2 μs$, more than two orders of magnitude faster than the intrinsic lifetime. Furthermore, we reset about 30 thermal photons in about $80 μs$ to a steady-state average photon number of $\bar{n} = 0.045 \pm 0.025$.
High-Q bosonic memories are central to hardware-efficient quantum error correction, but their isolation makes fast, high-fidelity reset a persistent bottleneck. Existing approaches either rely on weak intermode cross-Kerr conversion or on measurement-based sequences with substantial latency. Here we demonstrate a hardware-efficient Rabi-Driven Reset (RDR) that implements continuous, measurement-free cooling of a superconducting cavity mode. A strong resonant Rabi drive on a transmon, together with sideband drives on the memory and readout modes detuned by the Rabi frequency, converts the dispersive interaction into an effective Jaynes-Cummings coupling between the qubit dressed states and each mode. This realizes a tunable dissipation channel from the memory to the cold readout bath. Crucially, the engineered coupling scales with the qubit-mode dispersive interaction and the drive amplitude, rather than with the intermode cross-Kerr, enabling fast cooling even in very weakly coupled architectures that deliberately suppress direct mode-mode coupling. We demonstrate RDR of a single photon with a decay time of 1.2μs, more than two orders of magnitude faster than the intrinsic lifetime. Furthermore, we reset about 30 thermal photons in about 80μs to a steady-state average photon number of nˉ=0.045±0.025.
Dispersive readout, the current standard for measuring superconducting qubits, relies on relatively easy to engineer, static transverse coupling between a qubit and a detuned cavity mode. However, this method requires circuit design trade-offs between qubit-cavity coupling, cavity-feedline coupling, detuning, and the resultant decoherence introduced by the cavity mode. Additionally, the criteria for performing quantum nondemolition measurements, including reduced cavity photon numbers, further limits speed and fidelity. In this work, we introduce a circuit with pulse-tunable qubit-cavity and cavity-feedline couplings so that the entire qubit-measurement process can be fully optimized. Here, the core measurement process resembles a quantum gate operation between the qubit and the cavity, with the cavity acting like an ancilla, storing the qubit-state information. To fully explore time-dependent effects of the full qubit-cavity dynamics, we go beyond the rotating-wave, Jaynes-Cummings, or dispersive approximations, to develop a pulsed-measurement protocol. In addition, we propose a realistic circuit architecture that can provide a very fast, high-fidelity, QND measurement with near-unit efficiency.
Microwave cavity modes with long coherence times are used in many different quantum computing systems. During normal operation of such systems, these modes, called ``memory modes,'' often need to be set to different coherent photonic occupations. In this work we present a technique we call ``Rabi-driven reset'' in which the state of a memory mode is transferred into a decaying mode. This is done through a Rabi-driven qubit that is coupled to both modes via sideband driving tones. The outcome of the method is the initialization of the memory mode in any required coherent state. Simulations are presented to demonstrate the effectiveness of this technique, along with a comparison to an existing coupling method. Our simulations predict a decrease of an order of magnitude in initialization times compared with existing methods.
In a circuit QED architecture, we experimentally demonstrate a hardware-efficient and qubit-state-dependent Single-Step Phase-Engineered (SSPE) pulse scheme for actively depopulating a readout cavity. The protocol appends a reset segment with tailored amplitude and phase to a square readout pulse. Within the linear-response regime, the optimal reset amplitude scales proportionally with the readout amplitude, while the optimal reset phase remains invariant, significantly simplifying the experimental calibration procedure. For a known qubit state, time-resolved measurements demonstrate that the SSPE pulse achieves faster cavity depletion than the CLEAR protocol. Crucially, this approach enables arbitrarily fast, overshoot-free depletion of the cavity photon population, with the ultimate reset rate constrained by the available drive amplitude and the finite analog bandwidth of the measurement chain. A comprehensive evaluation of the QND character reveals no measurable increase in non-QNDness relative to the free-decay and CLEAR protocols. The remaining non-QNDness is predominantly attributable to state switching induced by qubit relaxation during the readout process. These results establish the SSPE scheme as a practical and scalable approach for achieving rapid and smooth cavity reset in superconducting quantum circuits in the case of a known qubit state.
Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.
We present a superconducting circuit device that provides active, on-demand, tunable dissipation on a target mode of the electromagnetic field. Our device is based on a tunable “dissipator” that can be made lossy when tuned into resonance with a broadband filter mode. When driven parametrically, this dissipator induces loss on any mode coupled to it with energy detuning equal to the drive frequency. We demonstrate the use of this device to reset a superconducting qubit’s readout cavity after a measurement, removing photons with a characteristic rate greater than 50μs−1 . We also demonstrate that the dissipation can be driven constantly to simultaneously damp and cool the cavity, effectively eliminating thermal photon fluctuations as a relevant decoherence channel. Our results demonstrate the utility of our device as a modular tool for environmental engineering and entropy removal in circuit quantum electrodynamics. Published by the American Physical Society 2024
Deterministic Fock-state generation and inter-mode SWAP are foundational primitives for bosonic quantum computing, yet most implementations rely on numerically optimized pulses, per-state calibration, strong dispersive coupling, or higher transmon levels, each adding control overhead that grows with system size. We present an analytical, calibration-light protocol operating entirely within the two-level g-e manifold of a weakly dispersively coupled transmon. A Rabi drive on the qubit, combined with a single sideband tone per mode, synthesizes an on-demand Jaynes-Cummings interaction whose entire family of pulse times follows the closed-form scaling τn=τ1/n. Once the single base time τ1 is set, every higher-n operation is fixed analytically, with no per-state retuning, shelving, or numerical optimization. On a superconducting flute cavity with two high-Q modes, we deterministically prepare Fock states through ∣n=5⟩, realize an inter-mode SWAP characterized on vacuum, single-photon, and coherent-state inputs, and generate and coherently swap the dual-rail Bell state (∣1,0⟩+∣0,1⟩)/2, confirming that the operation preserves inter-mode coherence. Because the pulses are constant-amplitude and free of per-state optimization, the achievable fidelity is set directly by ancilla coherence and drive-ramp duration; a master-equation analysis isolates these hardware factors and shows that the analytical scaling itself imposes no obstacle to high-fidelity operation at high n. Requiring only one sideband line per mode and a single Rabi drive, the protocol is well suited to weakly coupled, high-Q 3D architectures where calibration economy and analytical pulse design are at a premium.