Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2601.02549

Electron Beam Profiling via Rydberg Electromagnetically Induced Transparency in Rubidium Vapor with Crossed Laser beams

Rob Behary, Kevin Su, Nicolas DeStefano, Jennifer Tsai, Todd Averett, A. Camsonne, S. Zhang, Charles Fancher, Neel Malvania, S. Aubin, Eugeniy E. Mikhailov, Irina V. Novikova

Published Jan 5, 2026• 1 citation
arXivHTMLPDF

Abstract

We present an all-optical detection approach to determine the position and spatial profile of an electron beam based on quantum properties of alkali metal atoms. To measure the electric field, produced by an electron beam, we excite thermal rubidium atoms to a highly excited Rydberg state via a two-photon ladder transition and detect Stark shifts of Rydberg states by monitoring frequencies of the corresponding electromagnetically induced transparency (EIT) transmission peaks. We addressed several technical challenges in this approach. First, we use crossed laser beams to obtain spatial information about the electron beam position and geometry. Second, by pulsing the electron beam and using phase-sensitive optical detection, we separate the true electron beam electric signature from the parasitic electric fields due to photoelectric charges on the windows. Finally, we use a principle component analysis to further improve signal quality. We test this method to detect the current and to reconstruct a 2D profile of a 20 keV electron beam with currents ranging from 25 - 100 uA. While this technique provides less spatial resolution than fluorescence-based measurements, thanks to their speed and limited optical access requirements it can be useful for real-time non-invasive diagnostics of charged particle beams at accelerator facilities.

DOI
10.48550/arxiv.2601.02549

Related papers

Electron beam characterization via quantum coherent electric field imaging

Rob Behary, Kevin Su, Nicolas DeStefano +9 more

We demonstrate an all-optical, minimally invasive electron beam ( e − beam ) characterization using Rydberg electrometry. An e -beam passes through a localized detector volume containing thermal Rb atoms that are optically excited in a quantum superposition of ground and Rydberg states. The e -beam's electric field perturbs atomic coherence and modifies resonance fluorescence in a narrow spectral region near the two-photon optical transition. Imaging Rb fluorescence provides a map of the electric field from the e -beam via Rydberg state Stark shifts and allows us to reconstruct the e -beam width, centroid position, and current. For an e -beam of 20 keV and electron currents of 20–40 µ A , we measured the centroid position with an accuracy of ≤ 8 µ m and width to within 100 µ m , limited by the experimental sensitivity of electric field reconstruction of ∼ 0.02 V/cm. This method is suitable for a wide range of electron energies and currents, and can be adopted for nuclear and high-energy experiments for minimally invasive real-time diagnostics and profiling of charged particle beams.

arXiv:2504.21144•Physical Review Research•Oct 19, 2025•7 citations

Non-invasive measurements of plasma electric fields using Rydberg electromagnetically induced transparency

David Alexander Anderson, Alisher Duspayev, Georg A. Raithel +2 more

Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Performing non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large range of field magnitude remains an outstanding challenge. We introduce and demonstrate a method for plasma electric field measurement that employs electromagnetically induced transparency as a high-resolution quantum-optical probe for the Stark energy level shifts of Rydberg atoms embedded in a plasma and serving as highly sensitive field sensors. The method is applied in diagnostics of plasmas generated by photo-excitation of a cesium vapor. The plasma electric fields are extracted from spatially resolved measurements of field-induced lineshape changes and shifts of Rydberg resonances in rubidium tracer atoms. Measurement capabilities over a range of plasma densities and temperatures are exploited to characterize plasmas in applied magnetic fields and to image electric-field distributions in cyclotron-heated plasmas. Our results pave the way toward further applications of Rydberg-atom-based field sensors to diagnostics and monitoring of electric fields due to plasmas.

AVS Quantum Science•Sep 1, 2026•0 citations

Non-invasive 2D spatial measurements of electric fields within a plasma sheath

Mykhailo Vorobiov, Rob Behary, Luke Payne +10 more

We introduce an all-optical quantum-enhanced diagnostic for electric fields in low-temperature plasmas. Trace amounts of rubidium vapor, added to an argon plasma, allow us to employ spectrally narrow electric field-sensitive optical resonances via the quantum optical effect of Rydberg electromagnetically induced transparency. This non-invasive technique enables measurements of electric fields in plasma with a 1~V/cm precision and a 1.5~V/cm lower detection limit. By collecting the fluorescence from the illuminated region of interest, we reconstruct a 2D spatial profile of the electric field magnitude with $56~μ$m resolution. As a proof-of-principle demonstration, we measured the changes in the electric field within the plasma sheath surrounding a biased Langmuir probe tip. This method holds significant potential for studying sheath structures in low-temperature plasmas.

physics.plasm-phCross-listedarXiv:2511.12322•Nov 18, 2025•3 citations

Electron beam characterization via quantum coherent optical magnetometry

Nicolas DeStefano, Saeed Pegahan, Aneesh Ramaswamy +8 more

We present a quantum optics-based detection method for determining the position and current of an electron beam. As electrons pass through a dilute vapor of rubidium atoms, their magnetic field perturbs the atomic spin's quantum state and causes polarization rotation of a laser resonant with an optical transition of the atoms. By measuring the polarization rotation angle across the laser beam, we recreate a 2D projection of the magnetic field and use it to determine the e-beam position, size, and total current. We tested this method for an e-beam with currents ranging from 30 to 110 μA. Our approach is insensitive to electron kinetic energy, and we confirmed that experimentally between 10 and 20 keV. This technique offers a unique platform for noninvasive characterization of charged particle beams used in accelerators for particle and nuclear physics research.

arXiv:2412.02686•Applied Physics Letters•Dec 23, 2024•5 citations

Quantum-optical spectroscopy for plasma electric field measurements and diagnostics

David Alexander Anderson, Georg A. Raithel, Matthew T. Simons +1 more

Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Methods for non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large field range remain an outstanding challenge. Here, we introduce and demonstrate a new method for plasma electric field measurement that employs electromagnetically induced transparency as a high-resolution quantum-optical probe for the Stark energy level shifts of plasma-embedded Rydberg atoms, which serve as highly-sensitive field sensors with a large dynamic range. The method is applied in diagnostics of plasmas photo-excited out of a cesium vapor. The plasma electric fields are extracted from spatially-resolved measurements of field-induced shape changes and shifts of Rydberg resonances in rubidium tracer atoms. Measurement capabilities over a range of plasma densities and temperatures are exploited to characterize plasmas in applied magnetic fields and to image electric-field distributions in cyclotron-heated plasmas.

arXiv:1712.08717•Bulletin of the American Physical Society•Dec 23, 2017•22 citations

Electric field sensing via Rydberg electromagnetically induced transparency using Zeeman and Stark effects

Y. C. Chen, Shao-Cheng Fang, Hsuan-Jui Su +1 more

Rydberg-assisted atomic electrometry with thermal vapors offers a promising approach for detecting external electric fields. However, this technique presents significant challenges for measuring low frequencies due to the effects of metal-alkali atoms adsorbed on the interior surface of the vacuum chamber. In this work, we apply high-contrast Rydberg electromagnetically induced transparency (EIT) spectroscopy to systematically investigate these effects, including the influence of laser power and electric field strength. We demonstrate the ability to measure electric field frequencies ranging from 10 Hz to 1 MHz. Additionally, this study identifies a fundamental limit for data capacity in such measurements. Furthermore, we propose a method for precise Stark shift measurements by locking the coupling laser to Zeeman-split Rydberg EIT peaks. Using the Zeeman shift in a reference cell as a stable frequency reference, we are able to track Stark-induced shifts in a science cell and confirm excellent agreement with theoretical predictions. These results provide valuable insights for future precision measurement techniques and field sensing applications based on Rydberg atom systems.

arXiv:2402.01430•Journal of Applied Physics•Sep 2, 2025•3 citations
We present an all-optical detection approach to determine the position and spatial profile of an electron beam based on quantum properties of alkali metal atoms. To measure the electric field, produced by an electron beam, we excite thermal rubidium atoms to a highly excited Rydberg state via a two-photon ladder transition and detect Stark shifts of Rydberg states by monitoring frequencies of the corresponding electromagnetically induced transparency (EIT) transmission peaks. We addressed several technical challenges in this approach. First, we use crossed laser beams to obtain spatial information about the electron beam position and geometry. Second, by pulsing the electron beam and using phase-sensitive optical detection, we separate the true electron beam electric signature from the parasitic electric fields due to photoelectric charges on the windows. Finally, we use a principle component analysis to further improve signal quality. We test this method to detect the current and to reconstruct a 2D profile of a 20 keV electron beam with currents ranging from 25 - 100 uA. While this technique provides less spatial resolution than fluorescence-based measurements, thanks to their speed and limited optical access requirements it can be useful for real-time non-invasive diagnostics of charged particle beams at accelerator facilities.
We demonstrate an all-optical, minimally invasive electron beam ( e − beam ) characterization using Rydberg electrometry. An e -beam passes through a localized detector volume containing thermal Rb atoms that are optically excited in a quantum superposition of ground and Rydberg states. The e -beam's electric field perturbs atomic coherence and modifies resonance fluorescence in a narrow spectral region near the two-photon optical transition. Imaging Rb fluorescence provides a map of the electric field from the e -beam via Rydberg state Stark shifts and allows us to reconstruct the e -beam width, centroid position, and current. For an e -beam of 20 keV and electron currents of 20–40 µ A , we measured the centroid position with an accuracy of ≤ 8 µ m and width to within 100 µ m , limited by the experimental sensitivity of electric field reconstruction of ∼ 0.02 V/cm. This method is suitable for a wide range of electron energies and currents, and can be adopted for nuclear and high-energy experiments for minimally invasive real-time diagnostics and profiling of charged particle beams.
Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Performing non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large range of field magnitude remains an outstanding challenge. We introduce and demonstrate a method for plasma electric field measurement that employs electromagnetically induced transparency as a high-resolution quantum-optical probe for the Stark energy level shifts of Rydberg atoms embedded in a plasma and serving as highly sensitive field sensors. The method is applied in diagnostics of plasmas generated by photo-excitation of a cesium vapor. The plasma electric fields are extracted from spatially resolved measurements of field-induced lineshape changes and shifts of Rydberg resonances in rubidium tracer atoms. Measurement capabilities over a range of plasma densities and temperatures are exploited to characterize plasmas in applied magnetic fields and to image electric-field distributions in cyclotron-heated plasmas. Our results pave the way toward further applications of Rydberg-atom-based field sensors to diagnostics and monitoring of electric fields due to plasmas.
We introduce an all-optical quantum-enhanced diagnostic for electric fields in low-temperature plasmas. Trace amounts of rubidium vapor, added to an argon plasma, allow us to employ spectrally narrow electric field-sensitive optical resonances via the quantum optical effect of Rydberg electromagnetically induced transparency. This non-invasive technique enables measurements of electric fields in plasma with a 1~V/cm precision and a 1.5~V/cm lower detection limit. By collecting the fluorescence from the illuminated region of interest, we reconstruct a 2D spatial profile of the electric field magnitude with 56 μ56~μ56 μm resolution. As a proof-of-principle demonstration, we measured the changes in the electric field within the plasma sheath surrounding a biased Langmuir probe tip. This method holds significant potential for studying sheath structures in low-temperature plasmas.
We present a quantum optics-based detection method for determining the position and current of an electron beam. As electrons pass through a dilute vapor of rubidium atoms, their magnetic field perturbs the atomic spin's quantum state and causes polarization rotation of a laser resonant with an optical transition of the atoms. By measuring the polarization rotation angle across the laser beam, we recreate a 2D projection of the magnetic field and use it to determine the e-beam position, size, and total current. We tested this method for an e-beam with currents ranging from 30 to 110 μA. Our approach is insensitive to electron kinetic energy, and we confirmed that experimentally between 10 and 20 keV. This technique offers a unique platform for noninvasive characterization of charged particle beams used in accelerators for particle and nuclear physics research.
Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Methods for non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large field range remain an outstanding challenge. Here, we introduce and demonstrate a new method for plasma electric field measurement that employs electromagnetically induced transparency as a high-resolution quantum-optical probe for the Stark energy level shifts of plasma-embedded Rydberg atoms, which serve as highly-sensitive field sensors with a large dynamic range. The method is applied in diagnostics of plasmas photo-excited out of a cesium vapor. The plasma electric fields are extracted from spatially-resolved measurements of field-induced shape changes and shifts of Rydberg resonances in rubidium tracer atoms. Measurement capabilities over a range of plasma densities and temperatures are exploited to characterize plasmas in applied magnetic fields and to image electric-field distributions in cyclotron-heated plasmas.
Rydberg-assisted atomic electrometry with thermal vapors offers a promising approach for detecting external electric fields. However, this technique presents significant challenges for measuring low frequencies due to the effects of metal-alkali atoms adsorbed on the interior surface of the vacuum chamber. In this work, we apply high-contrast Rydberg electromagnetically induced transparency (EIT) spectroscopy to systematically investigate these effects, including the influence of laser power and electric field strength. We demonstrate the ability to measure electric field frequencies ranging from 10 Hz to 1 MHz. Additionally, this study identifies a fundamental limit for data capacity in such measurements. Furthermore, we propose a method for precise Stark shift measurements by locking the coupling laser to Zeeman-split Rydberg EIT peaks. Using the Zeeman shift in a reference cell as a stable frequency reference, we are able to track Stark-induced shifts in a science cell and confirm excellent agreement with theoretical predictions. These results provide valuable insights for future precision measurement techniques and field sensing applications based on Rydberg atom systems.