Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2512.20200

Waveguide-integrated colour centres in silicon carbide with broadband photonic crystal reflectors for efficient readout

Marcel Krumrein, Julian M. Bopp, Timo Steidl, Wolfgang Knolle, Jawad Ul-Hassan, Vadim Vorobyov, Tim Schröder, Jörg Wrachtrup

quant-phSubmitted Dec 23, 2025• Announced Dec 24, 2025
arXivHTMLPDF

Abstract

Spin-active colour centres in 4H silicon carbide are promising candidates as building blocks for quantum information applications. To increase the photon count rate of the emitters at low temperatures, the colour centres must be integrated into nanophotonic structures and characterised under cryogenic conditions. Here, we design and fabricate waveguide structures attached with an efficient Dinosaur photonic crystal reflector at one side. The devices show broadband reflection over a range of 60 THz with a peak reflectance above 80 %. Additionally, colour centres were integrated into these structures and characterised at cryogenic conditions. The emission was collected by a tapered-waveguide-tapered-fibre interface. Although the spectral stability of the emitters must be further improved for high excitation powers, the saturation intensity in standard PLE measurements is about 104 kcps. The count rate can be further improved to about 125 kcps with a charge-resonance check measurement scheme. To highlight the relevance of our devices, we theoretically show that these count rates enable optical single-shot readout with a fidelity exceeding 98 %.

Journal reference
npj Nanophoton. 3, 35 (2026)
DOI
10.1038/s44310-026-00118-4
Comments
13 pages, 6 figures

Related papers

Precise Characterization of a Waveguide Fiber Interface in Silicon Carbide

Marcel Krumrein, Raphael Nold, Flavie Davidson-Marquis +13 more

Spin-active optical emitters in silicon carbide are excellent candidates toward the development of scalable quantum technologies. However, efficient photon collection is challenged by undirected emission patterns from optical dipoles, as well as low total internal reflection angles due to the high refractive index of silicon carbide. Based on recent advances with emitters in silicon carbide waveguides, we now demonstrate a comprehensive study of nanophotonic waveguide-to-fiber interfaces in silicon carbide. We find that across a large range of fabrication parameters, our experimental collection efficiencies remain above 90%. Further, by integrating silicon vacancy color centers into these waveguides, we demonstrate an overall photon count rate of 181 kilo-counts per second, which is an order of magnitude higher compared to standard setups. We also quantify the shift of the ground state spin states due to strain fields, which can be introduced by waveguide fabrication techniques. Finally, we show coherent electron spin manipulation with waveguide-integrated emitters with state-of-the-art coherence times of T 2 ∼ 42 μs. The robustness of our methods is very promising for quantum networks based on multiple orchestrated emitters.

arXiv:2401.06096•ACS Photonics•May 22, 2024•19 citations

Coupling nitrogen vacancy centers in silicon carbide to nanophotonic resonators

Ivan Zhigulin, Konosuke Shimazaki, Samuel M. Stephens +5 more

Silicon carbide (SiC) is a promising platform for scalable quantum technologies owing to its well-established, wafer-scale industrial processing. SiC also hosts a variety of optically active color centres including the nitrogen vacancy defect that has a spin-triplet ground state. However, strong phonon coupling in the infrared range limits photon extraction from these defects. Here, we use nanophotonic structures, specifically micro-pillar and micro-disk resonators, to enhance optical collection and spin-readout. The micro-pillar geometry yields a 4-fold increase in photon collection, accompanied by a 2.4-fold reduction in spectral noise in optically detected magnetic resonance measurements. Consequently, the magnetic field sensitivity is improved by 24%. The large mode volume of the micro-disk supports resonances spanning 1150-1250 nm, enabling broadband coupling to nitrogen vacancy emission lines. Our results demonstrate that fabrication of scalable photonic structures efficiently improves performance of silicon carbide color centers for integrated quantum light generation and sensing.

physics.opticsCross-listedarXiv:2602.21505•Feb 26, 2026

Scalable integration of silicon carbide color centers into nanophotonic structures

Raphael Wörnle, Jonas Schmid, Dennis Grüner +7 more

Color centers in silicon carbide are a promising platform for quantum technologies, offering long-coherence electron and nuclear spins for storing and manipulating quantum information, as well as single-photon emission for quantum communication. Low photon collection efficiency is commonly addressed by integrating color centers into nanophotonic devices. Here, we report a scalable method for the deterministic integration of color centers into silicon carbide nanopillars, using the same nanoscale mask for both implantation of oxygen-related color centers (PL5, PL6) and subsequent nanopillar fabrication via dry etching. This approach solves the issue of low color center creation yield in nanostructures, with figures of merit comparable to bulk samples. We demonstrate count rate enhancements of up to one order of magnitude for PL5 and four times for PL6, while preserving spin coherence times. Our method is directly applicable to other solid-state platforms, offering a scalable route to efficiently integrate color centers into nanostructures.

quant-pharXiv:2609.27601•Sep 24, 2026

Colour Centre Formation in Silicon-On-Insulator for On-Chip Photonic Integration

Arnulf J. Snedker-Nielsen, David R. Gongora, Magnus L. Madsen +12 more

Colour centres in silicon have great potential as single photon sources for quantum technologies. Some of them - like the T centre - also possess optically-active spins that enable spin-photon interfaces for generating entangled photons and multi-spin registers. This paper explores the generation of several types of colour centres in silicon for mass-manufacturable silicon-on-insulator quantum devices. We investigate how different processes in the device development affect the presence of the quantum emitters, including thermal annealing and fabrication steps for optical nanostructures. The study reveals coupled formation dynamics between different colour centres, identifies optimal parameters for annealing processes, and reports on the sensitivity to annealing duration and nanofabrication procedures for photonic integrated circuits. Furthermore, we discern stable optical signals from colour centres in silicon which have not been identified before.

quant-pharXiv:2601.17919•Jan 27, 2026

Waveguide-integrated silicon T centres

Adam DeAbreu, Camille Bowness, A. Alizadeh +13 more

The performance of modular, networked quantum technologies will be strongly dependent upon the quality of their quantum light-matter interconnects. Solid-state colour centres, and in particular T centres in silicon, offer competitive technological and commercial advantages as the basis for quantum networking technologies and distributed quantum computing. These newly rediscovered silicon defects offer direct telecommunications-band photonic emission, long-lived electron and nuclear spin qubits, and proven native integration into industry-standard, CMOS-compatible, silicon-on-insulator (SOI) photonic chips at scale. Here we demonstrate further levels of integration by characterizing T centre spin ensembles in single-mode waveguides in SOI. In addition to measuring long spin T 1 times, we report on the integrated centres’ optical properties. We find that the narrow homogeneous linewidth of these waveguide-integrated emitters is already sufficiently low to predict the future success of remote spin-entangling protocols with only modest cavity Purcell enhancements. We show that further improvements may still be possible by measuring nearly lifetime-limited homogeneous linewidths in isotopically pure bulk crystals. In each case the measured linewidths are more than an order of magnitude lower than previously reported and further support the view that high-performance, large-scale distributed quantum technologies based upon T centres in silicon may be attainable in the near term.

arXiv:2209.14260•Optics Express•Apr 3, 2023•47 citations

Cavity Quantum Electrodynamics and Nanophotonic Integration for Quantum Light–Matter Interfaces

Alex Holt Rubin

Color centers are optically active point defects in semiconductor materials, many of them carrying a spin degree of freedom that couples coherently to emitted photons. This makes them a leading candidate for building quantum computers, networks, and sensors, but realizing that promise depends on the interface between the emitter and light. Color centers must be integrated into nanophotonic structures, such as nanopillars that collect their emission efficiently and optical cavities that couple them to a single mode. This dissertation studies the physics of quantum emitters inside such structures along two complementary threads: the direct cryogenic spectroscopy of color centers integrated into silicon carbide nanostructures, and the study of the physics of many-body cavity quantum electrodynamics (CQED) through simulation on superconducting and trapped-ion quantum hardware. The first thread concerns the nitrogen-vacancy (NV) center in 4H silicon carbide integrated into nanopillars. We show that the sub-wavelength geometry of a nanopillar reshapes the local electromagnetic environment, granting optical access to transitions that selection rules forbid in bulk material: emission from the PL3 divacancy, nearly absent in planar devices, becomes pronounced in nanopillars through a polarization transformation of the excitation field, and the orientation-dependent collection of the pillar resolves the previously ambiguous NV4′ line, establishing nanophotonic integration as a symmetry-sensitive probe of defect structure. We then take up the complementary problem of quantifying how many emitters a device contains, adapting the number-and-brightness technique from fluorescence microscopy to solid-state emitters. This calibration-free method counts dense NV ensembles in silicon carbide nanopillars, a regime beyond the reach of existing optical techniques, and extracts their areal density and formation yield. The second thread turns to many-body cavity QED, in which placing N emitters in a common cavity enhances the light-matter coupling by √N and gives rise to collective effects that are central to strong-coupling applications yet difficult to achieve in solid-state devices based on defects. We realize one such effect on a superconducting circuit, demonstrating photon blockade, the conversion of a coherent drive into a stream of single photons, in a Tavis–Cummings system of N = 1, 2, 3 transmon qubits coupled to a common resonator. To study the open-system dynamics that govern these systems, we digitally simulate the dissipative Tavis–Cummings model on both a superconducting and a trapped-ion processor. Platform-specific compilation and error mitigation yield population dynamics in close agreement with exact solutions, providing a recipe for simulating cavity-emitter systems on contemporary quantum computers. Together, the two threads connect the fabrication and characterization of color-center devices to the many-body cavity-QED physics that will ultimately govern their performance.

•Sep 8, 2026•0 citations
Spin-active colour centres in 4H silicon carbide are promising candidates as building blocks for quantum information applications. To increase the photon count rate of the emitters at low temperatures, the colour centres must be integrated into nanophotonic structures and characterised under cryogenic conditions. Here, we design and fabricate waveguide structures attached with an efficient Dinosaur photonic crystal reflector at one side. The devices show broadband reflection over a range of 60 THz with a peak reflectance above 80 %. Additionally, colour centres were integrated into these structures and characterised at cryogenic conditions. The emission was collected by a tapered-waveguide-tapered-fibre interface. Although the spectral stability of the emitters must be further improved for high excitation powers, the saturation intensity in standard PLE measurements is about 104 kcps. The count rate can be further improved to about 125 kcps with a charge-resonance check measurement scheme. To highlight the relevance of our devices, we theoretically show that these count rates enable optical single-shot readout with a fidelity exceeding 98 %.
Spin-active optical emitters in silicon carbide are excellent candidates toward the development of scalable quantum technologies. However, efficient photon collection is challenged by undirected emission patterns from optical dipoles, as well as low total internal reflection angles due to the high refractive index of silicon carbide. Based on recent advances with emitters in silicon carbide waveguides, we now demonstrate a comprehensive study of nanophotonic waveguide-to-fiber interfaces in silicon carbide. We find that across a large range of fabrication parameters, our experimental collection efficiencies remain above 90%. Further, by integrating silicon vacancy color centers into these waveguides, we demonstrate an overall photon count rate of 181 kilo-counts per second, which is an order of magnitude higher compared to standard setups. We also quantify the shift of the ground state spin states due to strain fields, which can be introduced by waveguide fabrication techniques. Finally, we show coherent electron spin manipulation with waveguide-integrated emitters with state-of-the-art coherence times of T 2 ∼ 42 μs. The robustness of our methods is very promising for quantum networks based on multiple orchestrated emitters.
Silicon carbide (SiC) is a promising platform for scalable quantum technologies owing to its well-established, wafer-scale industrial processing. SiC also hosts a variety of optically active color centres including the nitrogen vacancy defect that has a spin-triplet ground state. However, strong phonon coupling in the infrared range limits photon extraction from these defects. Here, we use nanophotonic structures, specifically micro-pillar and micro-disk resonators, to enhance optical collection and spin-readout. The micro-pillar geometry yields a 4-fold increase in photon collection, accompanied by a 2.4-fold reduction in spectral noise in optically detected magnetic resonance measurements. Consequently, the magnetic field sensitivity is improved by 24%. The large mode volume of the micro-disk supports resonances spanning 1150-1250 nm, enabling broadband coupling to nitrogen vacancy emission lines. Our results demonstrate that fabrication of scalable photonic structures efficiently improves performance of silicon carbide color centers for integrated quantum light generation and sensing.
Color centers in silicon carbide are a promising platform for quantum technologies, offering long-coherence electron and nuclear spins for storing and manipulating quantum information, as well as single-photon emission for quantum communication. Low photon collection efficiency is commonly addressed by integrating color centers into nanophotonic devices. Here, we report a scalable method for the deterministic integration of color centers into silicon carbide nanopillars, using the same nanoscale mask for both implantation of oxygen-related color centers (PL5, PL6) and subsequent nanopillar fabrication via dry etching. This approach solves the issue of low color center creation yield in nanostructures, with figures of merit comparable to bulk samples. We demonstrate count rate enhancements of up to one order of magnitude for PL5 and four times for PL6, while preserving spin coherence times. Our method is directly applicable to other solid-state platforms, offering a scalable route to efficiently integrate color centers into nanostructures.
Colour centres in silicon have great potential as single photon sources for quantum technologies. Some of them - like the T centre - also possess optically-active spins that enable spin-photon interfaces for generating entangled photons and multi-spin registers. This paper explores the generation of several types of colour centres in silicon for mass-manufacturable silicon-on-insulator quantum devices. We investigate how different processes in the device development affect the presence of the quantum emitters, including thermal annealing and fabrication steps for optical nanostructures. The study reveals coupled formation dynamics between different colour centres, identifies optimal parameters for annealing processes, and reports on the sensitivity to annealing duration and nanofabrication procedures for photonic integrated circuits. Furthermore, we discern stable optical signals from colour centres in silicon which have not been identified before.
The performance of modular, networked quantum technologies will be strongly dependent upon the quality of their quantum light-matter interconnects. Solid-state colour centres, and in particular T centres in silicon, offer competitive technological and commercial advantages as the basis for quantum networking technologies and distributed quantum computing. These newly rediscovered silicon defects offer direct telecommunications-band photonic emission, long-lived electron and nuclear spin qubits, and proven native integration into industry-standard, CMOS-compatible, silicon-on-insulator (SOI) photonic chips at scale. Here we demonstrate further levels of integration by characterizing T centre spin ensembles in single-mode waveguides in SOI. In addition to measuring long spin T 1 times, we report on the integrated centres’ optical properties. We find that the narrow homogeneous linewidth of these waveguide-integrated emitters is already sufficiently low to predict the future success of remote spin-entangling protocols with only modest cavity Purcell enhancements. We show that further improvements may still be possible by measuring nearly lifetime-limited homogeneous linewidths in isotopically pure bulk crystals. In each case the measured linewidths are more than an order of magnitude lower than previously reported and further support the view that high-performance, large-scale distributed quantum technologies based upon T centres in silicon may be attainable in the near term.
Color centers are optically active point defects in semiconductor materials, many of them carrying a spin degree of freedom that couples coherently to emitted photons. This makes them a leading candidate for building quantum computers, networks, and sensors, but realizing that promise depends on the interface between the emitter and light. Color centers must be integrated into nanophotonic structures, such as nanopillars that collect their emission efficiently and optical cavities that couple them to a single mode. This dissertation studies the physics of quantum emitters inside such structures along two complementary threads: the direct cryogenic spectroscopy of color centers integrated into silicon carbide nanostructures, and the study of the physics of many-body cavity quantum electrodynamics (CQED) through simulation on superconducting and trapped-ion quantum hardware. The first thread concerns the nitrogen-vacancy (NV) center in 4H silicon carbide integrated into nanopillars. We show that the sub-wavelength geometry of a nanopillar reshapes the local electromagnetic environment, granting optical access to transitions that selection rules forbid in bulk material: emission from the PL3 divacancy, nearly absent in planar devices, becomes pronounced in nanopillars through a polarization transformation of the excitation field, and the orientation-dependent collection of the pillar resolves the previously ambiguous NV4′ line, establishing nanophotonic integration as a symmetry-sensitive probe of defect structure. We then take up the complementary problem of quantifying how many emitters a device contains, adapting the number-and-brightness technique from fluorescence microscopy to solid-state emitters. This calibration-free method counts dense NV ensembles in silicon carbide nanopillars, a regime beyond the reach of existing optical techniques, and extracts their areal density and formation yield. The second thread turns to many-body cavity QED, in which placing N emitters in a common cavity enhances the light-matter coupling by √N and gives rise to collective effects that are central to strong-coupling applications yet difficult to achieve in solid-state devices based on defects. We realize one such effect on a superconducting circuit, demonstrating photon blockade, the conversion of a coherent drive into a stream of single photons, in a Tavis–Cummings system of N = 1, 2, 3 transmon qubits coupled to a common resonator. To study the open-system dynamics that govern these systems, we digitally simulate the dissipative Tavis–Cummings model on both a superconducting and a trapped-ion processor. Platform-specific compilation and error mitigation yield population dynamics in close agreement with exact solutions, providing a recipe for simulating cavity-emitter systems on contemporary quantum computers. Together, the two threads connect the fabrication and characterization of color-center devices to the many-body cavity-QED physics that will ultimately govern their performance.