Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2512.18767

Long-distance quantum communication sending single photons and keeping many

Stefan Häussler, Peter van Loock

quant-phSubmitted Dec 21, 2025• Announced Dec 23, 2025• 3 citations
arXivHTMLPDF

Abstract

Fiber-based classical communication is all-optical and uses light pulses reamplified and reshaped every 50-100 km in classical repeaters. Most compatible with this would be a quantum communication system which is also all-optical with quantum processing units placed in similar intervals. However, existing all-optical quantum communication protocols either require complicated quantum error correction steps for logical-qubit recoveries at every few kilometers or, over larger quantum repeater segments, they would at least depend on sharing complex multi-photon entangled states. Here we propose an all-optical memory-based quantum repeater for long-distance quantum communication, with quantum memories at each repeater station realized in the form of fiber loops combined with suitable quantum error correction codes for photon-loss protection. By sending only single-photon states through the fibers connecting the stations, such repeaters can operate in the classical infrastructure's long-segment regime. We analyze the performance of our scheme for the Gottesman-Kitaev-Preskill code, including a concatenation with the Steane code, as well as the single-photon quantum parity code for total distances up to 10000 km.

Comments
14 pages, 7 figures

Related papers

High-Rate and Resource-Efficient All-Photonic Quantum Repeater Architectures with 9 km Repeater Spacing

Ryosuke Shiina, Kenneth Goodenough, Nathan Arnold +1 more

Quantum communication between two distant parties will serve as a cornerstone of the future quantum internet. However, generating enough entangled Bell pairs over long distances is a critical bottleneck. Although photons are ideal carriers of quantum information, overcoming photon loss and the exponential attenuation of signals remains a major challenge. We propose an all-photonic quantum repeater architecture that enables quantum communication over 1,000 km with an equidistant repeater spacing of 9 km. This repeater spacing is enabled by elementary entangled Bell pairs protected through the concatenation of continuous-variable and discrete-variable quantum error correction codes, namely, the bosonic Gottesman-Kitaev-Preskill (GKP) code and the [[7,1,3]] Steane code, whose combination yields a synergistic improvement in robustness against photon loss. This architecture incorporates a new ranking criterion and a multi-reflection mirror-based optical cavity as a free-space photonic memory module, which we model in terms of its length and mirror-reflection efficiency. Additionally, we propose two heuristic construction methods for the elementary entangled Bell pairs. One method introduces up to two-qubit correlated errors within each logical qubit but requires a large number of GKP qubits, while the other allows up to three-qubit correlated errors within each logical qubit but requires fewer GKP qubits. To more accurately capture realistic physical conditions during photonic resource preparation, we include switching-induced imperfections in our simulations, in addition to other standard optical imperfections. In the presence of these imperfections, our realization requires only a few thousand GKP qubits per repeater station per protocol run, a resource requirement significantly smaller than the corresponding resource requirements of prior third-generation all-photonic repeater proposals.

quant-pharXiv:2606.25314•Jun 25, 2026•0 citations

Extending Repeater Spacing in All-Photonic Quantum Repeaters

Ryosuke Shiina, Kenneth Goodenough, Filip Rozpędek

Quantum communication between two distant parties will serve as a cornerstone of the future quantum internet. However, many existing quantum communication schemes face a critical bottleneck: the need to generate a sufficient number of entangled Bell pairs over long distances. Although photons are ideal carriers of quantum information, overcoming photon loss and the exponential attenuation of signals remains a major challenge. We propose an all-photonic quantum repeater architecture that enables quantum communication over a distance of$1,000 \text{km}$with equidistant repeater spacing extended to 9 km -approximately 2 to 6 times longer than in previously proposed all-photonic schemes. This extended repeater spacing arises from the combined use of elementary entangled Bell pairs protected by both continuous-variable and discrete-variable quantum error correction codes-namely, the bosonic Gottesman-Kitaev-Preskill (GKP) code and the [[7], [1], [3]] Steane code-whose combination yields a synergistic effect that surpasses a simple additive improvement, enhancing robustness against photon loss. This architecture incorporates a new ranking criterion and a multi-reflection mirror-based optical cavity as a free-space photonic memory module, which we model in terms of its length and mirror-reflection efficiency. To more accurately capture realistic physical conditions during photonic resource preparation, we model the presence of switching-induced imperfections by introducing an optical switch into the simulation, in addition to commonly considered imperfections such as finite GKP squeezing, finite detection efficiency, and finite fiber coupling efficiency. In the presence of these imperfections, our realization requires fewer than$\mathbf{3, 8 0 0}$GKP qubits per repeater station per protocol run-a value significantly smaller than in prior all-photonic proposals.

International Conference on Quantum Communications, Networking, and Computing (QCNC)•Apr 6, 2026•0 citations

All-optical long-distance quantum communication with Gottesman-Kitaev-Preskill qubits

Kosuke Fukui, Rafael N. Alexander, Peter van Loock

Quantum repeaters are a promising platform for realizing long-distance quantum communication and thus could form the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. Repeater protocols that encode information in single- or multiphoton states are limited by transmission losses and the cost of implementing entangling gates or Bell measurements. In this work, we consider implementing a quantum repeater protocol using Gottesman-Kitaev-Preskill (GKP) qubits. These qubits are natural elements for quantum repeater protocols, because they allow for deterministic Gaussian entangling operations and Bell measurements, which can be implemented at room temperature. The GKP encoding is also capable of correcting small displacement errors. At the cost of additional Gaussian noise, photon loss can be converted into a random displacement error channel by applying a phase-insensitive amplifier. Here we show that a similar conversion can be achieved in two-way repeater protocols by using phase-sensitive amplification applied in the postprocessing of the measurement data, resulting in less overall Gaussian noise per (sufficiently short) repeater segment. We also investigate concatenating the GKP code with higher-level qubit codes while leveraging analog syndrome data, postselection, and path-selection techniques to boost the rate of communication. We compute the secure key rates and find that GKP repeaters can achieve a comparative performance relative to methods based on photonic qubits while using orders-of-magnitude fewer qubits.

arXiv:2011.14876•Physical Review Research•Aug 5, 2021•83 citations

All Linear Optical Quantum Memory Based on Quantum Error Correction

Robert M. Gingrich, Pieter Kok, Hwang Lee +2 more

When photons are sent through a fiber as part of a quantum communication protocol, the error that is most difficult to correct is photon loss. Here we propose and analyze a two-to-four qubit encoding scheme, which can recover the loss of one qubit in the transmission. This device acts as a repeater, when it is placed in series to cover a distance larger than the attenuation length of the fiber, and it acts as an optical quantum memory, when it is inserted in a fiber loop. We call this dual-purpose device a "quantum transponder."

arXiv:quant-ph/0306098•Physical Review Letters•Nov 18, 2003•51 citations

Loss-Tolerant Quantum Communication via Bosonic-GKP-Parity-Encoding

S. Nibedita Swain, Timothy C. Ralph

Quantum repeaters constitute a promising platform for enabling long-distance quantum communication and may ultimately serve as the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. An efficient approach to encoding qubits within an error correcting code is provided by bosonic codes, in which even a single oscillator mode can function as a sufficiently large physical system. In this work, we initially investigate the bosonic Gottesman Kitaev Preskill (GKP) code as a promising platform for loss correcting quantum repeaters, compatible with room temperature implementation, and analyse how loss and other noise sources propagate through the circuit using Heisenberg evolution. We analyse three quantum repeater protocols in which transmission loss is suppressed at the cost of logical errors, identifying a relay-like teleamplifier as the optimal scheme. This enables long distance quantum communication via densely packed nodes without higher-level encoding, and we evaluate the resulting secure key rates exploiting analog syndrome information. Furthermore, we propose a concatenated Bell-state measurement (CBSM) scheme with a modified parity encoding based on GKP qubits, CV measurement with teleamplifier and a clipping method that corrects transmission loss without introducing logical errors. This significantly enhances the possible secure key distance. We find that GKP based repeaters can achieve performance comparable to approaches relying on photonic qubits, while requiring orders of magnitude fewer qubits. Our parity encoded GKP repeater protocol achieves a substantially higher secret key rate than existing GKP based repeater schemes while maintaining a comparable resource overhead.

quant-pharXiv:2604.09002•Apr 13, 2026•1 citation

Hybrid quantum repeaters with ensemble-based quantum memories and single-spin photon transducers

Johannes Borregaard, Johannes Borregaard, Fenglei Gu +13 more

Reliable quantum communication over hundreds of kilometers is a daunting yet necessary requirement for a quantum internet. To overcome photon loss, the deployment of quantum repeater stations between distant network nodes is necessary. A plethora of different quantum hardware is being developed for this purpose, each platform with its own opportunities and challenges. Here, we propose to combine two promising hardware platforms in a hybrid quantum repeater architecture to lower the cost and boost the performance of long-distance quantum communication. We outline how ensemble-based quantum memories combined with single-spin photon transducers, which can transfer quantum information between a photon and a single spin, can facilitate massive multiplexing, efficient photon generation, and quantum logic for amplifying communication rates. As a specific example, we describe how a single Rubidium (Rb) atom coupled to nanophotonic resonators can function as a high-rate, telecom-visible entangled photon source with the visible photon being compatible with storage in a Thulium-doped crystal memory (Tm-memory) and the telecom photon being compatible with low-loss fiber propagation. We experimentally verify that the Tm and Rb transitions resonate with each other. Our analysis shows that by employing up to nine repeater stations, each equipped with two Tm-memories capable of holding up to 625 storage modes, along with four single Rb atoms, one can reach a quantum communication rate of about 10 secret bits per second across distances of up to 1000 km.

arXiv:2401.12395•npj Quantum Information•Nov 20, 2025•22 citations
Fiber-based classical communication is all-optical and uses light pulses reamplified and reshaped every 50-100 km in classical repeaters. Most compatible with this would be a quantum communication system which is also all-optical with quantum processing units placed in similar intervals. However, existing all-optical quantum communication protocols either require complicated quantum error correction steps for logical-qubit recoveries at every few kilometers or, over larger quantum repeater segments, they would at least depend on sharing complex multi-photon entangled states. Here we propose an all-optical memory-based quantum repeater for long-distance quantum communication, with quantum memories at each repeater station realized in the form of fiber loops combined with suitable quantum error correction codes for photon-loss protection. By sending only single-photon states through the fibers connecting the stations, such repeaters can operate in the classical infrastructure's long-segment regime. We analyze the performance of our scheme for the Gottesman-Kitaev-Preskill code, including a concatenation with the Steane code, as well as the single-photon quantum parity code for total distances up to 10000 km.
Quantum communication between two distant parties will serve as a cornerstone of the future quantum internet. However, generating enough entangled Bell pairs over long distances is a critical bottleneck. Although photons are ideal carriers of quantum information, overcoming photon loss and the exponential attenuation of signals remains a major challenge. We propose an all-photonic quantum repeater architecture that enables quantum communication over 1,000 km with an equidistant repeater spacing of 9 km. This repeater spacing is enabled by elementary entangled Bell pairs protected through the concatenation of continuous-variable and discrete-variable quantum error correction codes, namely, the bosonic Gottesman-Kitaev-Preskill (GKP) code and the [[7,1,3]] Steane code, whose combination yields a synergistic improvement in robustness against photon loss. This architecture incorporates a new ranking criterion and a multi-reflection mirror-based optical cavity as a free-space photonic memory module, which we model in terms of its length and mirror-reflection efficiency. Additionally, we propose two heuristic construction methods for the elementary entangled Bell pairs. One method introduces up to two-qubit correlated errors within each logical qubit but requires a large number of GKP qubits, while the other allows up to three-qubit correlated errors within each logical qubit but requires fewer GKP qubits. To more accurately capture realistic physical conditions during photonic resource preparation, we include switching-induced imperfections in our simulations, in addition to other standard optical imperfections. In the presence of these imperfections, our realization requires only a few thousand GKP qubits per repeater station per protocol run, a resource requirement significantly smaller than the corresponding resource requirements of prior third-generation all-photonic repeater proposals.
Quantum communication between two distant parties will serve as a cornerstone of the future quantum internet. However, many existing quantum communication schemes face a critical bottleneck: the need to generate a sufficient number of entangled Bell pairs over long distances. Although photons are ideal carriers of quantum information, overcoming photon loss and the exponential attenuation of signals remains a major challenge. We propose an all-photonic quantum repeater architecture that enables quantum communication over a distance of1,000km1,000 \text{km}1,000kmwith equidistant repeater spacing extended to 9 km -approximately 2 to 6 times longer than in previously proposed all-photonic schemes. This extended repeater spacing arises from the combined use of elementary entangled Bell pairs protected by both continuous-variable and discrete-variable quantum error correction codes-namely, the bosonic Gottesman-Kitaev-Preskill (GKP) code and the [[7], [1], [3]] Steane code-whose combination yields a synergistic effect that surpasses a simple additive improvement, enhancing robustness against photon loss. This architecture incorporates a new ranking criterion and a multi-reflection mirror-based optical cavity as a free-space photonic memory module, which we model in terms of its length and mirror-reflection efficiency. To more accurately capture realistic physical conditions during photonic resource preparation, we model the presence of switching-induced imperfections by introducing an optical switch into the simulation, in addition to commonly considered imperfections such as finite GKP squeezing, finite detection efficiency, and finite fiber coupling efficiency. In the presence of these imperfections, our realization requires fewer than3,800\mathbf{3, 8 0 0}3,800GKP qubits per repeater station per protocol run-a value significantly smaller than in prior all-photonic proposals.
Quantum repeaters are a promising platform for realizing long-distance quantum communication and thus could form the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. Repeater protocols that encode information in single- or multiphoton states are limited by transmission losses and the cost of implementing entangling gates or Bell measurements. In this work, we consider implementing a quantum repeater protocol using Gottesman-Kitaev-Preskill (GKP) qubits. These qubits are natural elements for quantum repeater protocols, because they allow for deterministic Gaussian entangling operations and Bell measurements, which can be implemented at room temperature. The GKP encoding is also capable of correcting small displacement errors. At the cost of additional Gaussian noise, photon loss can be converted into a random displacement error channel by applying a phase-insensitive amplifier. Here we show that a similar conversion can be achieved in two-way repeater protocols by using phase-sensitive amplification applied in the postprocessing of the measurement data, resulting in less overall Gaussian noise per (sufficiently short) repeater segment. We also investigate concatenating the GKP code with higher-level qubit codes while leveraging analog syndrome data, postselection, and path-selection techniques to boost the rate of communication. We compute the secure key rates and find that GKP repeaters can achieve a comparative performance relative to methods based on photonic qubits while using orders-of-magnitude fewer qubits.
When photons are sent through a fiber as part of a quantum communication protocol, the error that is most difficult to correct is photon loss. Here we propose and analyze a two-to-four qubit encoding scheme, which can recover the loss of one qubit in the transmission. This device acts as a repeater, when it is placed in series to cover a distance larger than the attenuation length of the fiber, and it acts as an optical quantum memory, when it is inserted in a fiber loop. We call this dual-purpose device a "quantum transponder."
Quantum repeaters constitute a promising platform for enabling long-distance quantum communication and may ultimately serve as the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. An efficient approach to encoding qubits within an error correcting code is provided by bosonic codes, in which even a single oscillator mode can function as a sufficiently large physical system. In this work, we initially investigate the bosonic Gottesman Kitaev Preskill (GKP) code as a promising platform for loss correcting quantum repeaters, compatible with room temperature implementation, and analyse how loss and other noise sources propagate through the circuit using Heisenberg evolution. We analyse three quantum repeater protocols in which transmission loss is suppressed at the cost of logical errors, identifying a relay-like teleamplifier as the optimal scheme. This enables long distance quantum communication via densely packed nodes without higher-level encoding, and we evaluate the resulting secure key rates exploiting analog syndrome information. Furthermore, we propose a concatenated Bell-state measurement (CBSM) scheme with a modified parity encoding based on GKP qubits, CV measurement with teleamplifier and a clipping method that corrects transmission loss without introducing logical errors. This significantly enhances the possible secure key distance. We find that GKP based repeaters can achieve performance comparable to approaches relying on photonic qubits, while requiring orders of magnitude fewer qubits. Our parity encoded GKP repeater protocol achieves a substantially higher secret key rate than existing GKP based repeater schemes while maintaining a comparable resource overhead.
Reliable quantum communication over hundreds of kilometers is a daunting yet necessary requirement for a quantum internet. To overcome photon loss, the deployment of quantum repeater stations between distant network nodes is necessary. A plethora of different quantum hardware is being developed for this purpose, each platform with its own opportunities and challenges. Here, we propose to combine two promising hardware platforms in a hybrid quantum repeater architecture to lower the cost and boost the performance of long-distance quantum communication. We outline how ensemble-based quantum memories combined with single-spin photon transducers, which can transfer quantum information between a photon and a single spin, can facilitate massive multiplexing, efficient photon generation, and quantum logic for amplifying communication rates. As a specific example, we describe how a single Rubidium (Rb) atom coupled to nanophotonic resonators can function as a high-rate, telecom-visible entangled photon source with the visible photon being compatible with storage in a Thulium-doped crystal memory (Tm-memory) and the telecom photon being compatible with low-loss fiber propagation. We experimentally verify that the Tm and Rb transitions resonate with each other. Our analysis shows that by employing up to nine repeater stations, each equipped with two Tm-memories capable of holding up to 625 storage modes, along with four single Rb atoms, one can reach a quantum communication rate of about 10 secret bits per second across distances of up to 1000 km.