Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2512.09745

Quantum error correction via purification using a single auxiliary

Chandrima B. Pushpan, Tanoy Kanti Konar, Aditi Sen De, Amit Kumar Pal

quant-phcond-mat.str-elSubmitted Dec 10, 2025• Announced Dec 11, 2025• 0 citations
arXivHTMLPDF

Abstract

We propose a single auxiliary-assisted purification-based framework for quantum error correction, capable of correcting errors that drive a system from its ground-state subspace into excited-state sectors. The protocol consists of a joint time evolution of the system-auxiliary duo under a specially engineered interaction Hamiltonian, followed by a single measurement of the auxiliary in its energy eigenbasis and a subsequent post-selection of one of the measurement outcomes. We show that the resulting purified state always achieves unit fidelity, while the probability of obtaining any energy of the auxiliary other than its ground state energy yields the success rate of the protocol. We demonstrate the power of this proposed method for several low-distance quantum codes, including the three-, four-, and five-qubit codes, and for the one-dimensional isotropic Heisenberg model, subjected to bit-flip, phase-flip, and amplitude-damping noises acting on all qubits. Notably, the protocol expands the class of correctable errors for a given code, particularly in the presence of amplitude-damping noise. We further analyze the impact of replacing the auxiliary qudit with a single auxiliary qubit, and the changes in the performance of the protocol under the realistic scenario where noise remains active during the correction cycle.

Comments
17 pages, 8 figures

Related papers

Developing a universal logical state-purification strategy

Anonymous, Tanoy Kanti Konar, Aditi SenDe +1 more

We develop a measurement-based protocol for simultaneously purifying arbitrary logical states in multiple quantum error correcting codes with unit fidelity and finite probability, starting from arbitrary thermal states of each code. The protocol entails a time evolution caused by an engineered Hamiltonian, which results in transitions between the logical and error subspaces of the quantum error correcting code mediated by the auxiliary qubit, followed by a projective measurement in an optimum basis on the auxiliary qubit and an appropriate post-selection of the measurement outcomes. We illustrate the results with the three-qubit repetition code and the logical qubit used in quantum state transfer protocol. We further demonstrate that when the measurement base is not optimal, it is possible to achieve both classical fidelity, and fidelity as high as $90\%$ through several iterations of the purifying procedure, thereby establishing its robustness against variations in the measurement basis. By repeating the purification rounds, we show that purifying the cardinal states of the logical Bloch sphere corresponding to logical qubits in quantum state transfer is feasible utilizing paradigmatic quantum spin models as the generator of the time evolution.

arXiv:2502.01393•Physical Review A•Jul 7, 2026•0 citations

Quantum Purification for Amplitude Damping Noise

Kai Wang, Zhenyang Peng

Noise poses a fundamental challenge to quantum information processing, with amplitude-damping (AD) noise being particularly detrimental. Preserving high-fidelity quantum systems therefore relies critically on effective error correction and purification methods. In this work, we introduce a novel approach for mitigating AD noise that can be applied to both state and channel purification. Our method achieves a substantial enhancement in the fidelity of affected states or channels while maintaining a low resource overhead, requiring only one or two ancilla qubits in combination with two Clifford gates, and exhibits a relatively high success probability. This approach provides a practical and scalable framework for addressing AD noise in realistic quantum systems.

arXiv:2509.05709•Sep 6, 2025•2 citations

Continuous quantum error correction for non-Markovian decoherence

Ognyan Oreshkov, Todd A. Brun

We study the effect of continuous quantum error correction in the case where each qubit in a codeword is subject to a general Hamiltonian interaction with an independent bath. We first consider the scheme in the case of a trivial single-qubit code, which provides useful insights into the workings of continuous error correction and the difference between Markovian and non-Markovian decoherence. We then study the model of a bit-flip code with each qubit coupled to an independent bath qubit and subject to continuous correction, and find its solution. We show that for sufficiently large error-correction rates, the encoded state approximately follows an evolution of the type of a single decohering qubit, but with an effectively decreased coupling constant. The factor by which the coupling constant is decreased scales quadratically with the error-correction rate. This is compared to the case of Markovian noise, where the decoherence rate is effectively decreased by a factor which scales only linearly with the rate of error correction. The quadratic enhancement depends on the existence of a Zeno regime in the Hamiltonian evolution which is absent in purely Markovian dynamics. We analyze the range of validity of this result and identify two relevant time scales. Finally, we extend the result to more general codes and argue that the performance of continuous error correction will exhibit the same qualitative characteristics.

arXiv:0705.2342•Physical Review A•Aug 20, 2007•47 citations

Virtual Channel Purification

Zhenhuan Liu, Xingjian Zhang, Yue-Yang Fei +1 more

Quantum error mitigation is a key approach for extracting target state properties on state-of-the-art noisy machines and early fault-tolerant devices. Using the ideas from flag fault tolerance and virtual state purification, we develop the virtual-channel-purification (VCP) protocol, which consumes similar qubit and gate resources as virtual state purification but offers stronger error suppression with increased system size and more noisy operation copies. The application of VCP does not require specific knowledge about the target quantum state, the target problem and the gate noise model in the target circuit, and can still offer rigorous performance guarantees for practical noise regimes as long as the noise is incoherent. Further connections are made between VCP and quantum error correction to produce the virtual error-correction (VEC) protocol, one of the first protocols that combine quantum error correction (QEC) and quantum error mitigation beyond directly applying error-mitigation protocols on top of logical qubits. Assuming perfect syndrome extraction, VEC can virtually remove all correctable noise in the channel while paying only the same sampling cost as low-order purification. It can achieve QEC-level protection on an unencoded register when transmitting it through a noisy channel, removing the associated encoding qubit overhead. Another variant of VEC can mimic the error-suppression power of the surface code by inputting only a bit-flip and a phase-flip code. Our protocol can also be adapted to key tasks in quantum networks like channel capacity activation and entanglement distribution.

arXiv:2402.07866•PRX Quantum•May 6, 2025•27 citations

Hybrid Quantum Error Correction and Mitigation by Purification

Jonathan Raghoonanan, Tim Byrnes

Quantum error correction physically removes errors from a quantum state, while quantum error mitigation improves observable estimates by processing noisy measurement data. We introduce \emph{purification quantum error suppression} (PQES), a hybrid approach that uses multiple noisy copies of an unknown state to combine these two ideas. The protocol uses SWAP tests to physically reduce errors by purification, while the full outcome record is used to combine all branches without postselection. In this way, PQES avoids the fixed-success-outcome requirement of standard SWAP-test purification while still accessing the power-purified state $ρ^N$. The SWAP identities allow purification steps to be interleaved with unitary circuit blocks, so errors can be suppressed during a computation rather than only at the final measurement. We provide both a parallel binary-tree implementation and a more compact register-recycled implementation using $O(M\ell)$ coherent data qubits for an $M$-qubit register and $N=2^\ell$ input copies. We analyze the resulting error thresholds under representative noise models. For local depolarizing noise on the product-state family studied here, the threshold is $p_{\mathrm{th}}=3/4$ for any register size, while local dephasing of $|+\rangle^{\otimes M}$ has a threshold of $p_{\mathrm{th}}=1/2$. Local Clifford twirling can be used to convert dephasing into a depolarization channel and restore the higher threshold.

quant-pharXiv:2603.11568•Mar 13, 2026•1 citation

Modeling error correction with Lindblad dynamics and approximate channels

Zohar Schwartzman-Nowik, Liran Shirizly, Haggai Landa

We analyze the performance of a quantum error-correction code subject to physically motivated noise modeled by a Lindblad master equation. We consider dissipative and coherent single-qubit terms and two-qubit crosstalk, studying how different approximations of the noise capture the success rate of a code. Focusing on the five-qubit code and adapting it to partially correct two-qubit errors in relevant parameter regimes according to the noise model, we find that a composite-channel approximation where every noise term is considered separately captures the behavior in many physical cases up to long timescales, eventually failing due to the effect of noncommuting terms. In contrast, we find that single-qubit approximations do not properly capture the error-correction dynamics with two-qubit noise, even for short times. A Pauli approximation going beyond a single-qubit channel is sensitive to the details of the noise, state, and decoder and succeeds at short timescales relative to the noise strength, beyond which it fails. Furthermore, we point out a mechanism for a Pauli model failure where it underestimates the success rate of a code even with frequent syndrome projection and correction cycles. These results shed light on the performance of error correction in the presence of realistic noise and can advance the ongoing efforts towards useful quantum error correction.

arXiv:2402.16727•Physical Review A•Feb 13, 2025•11 citations
We propose a single auxiliary-assisted purification-based framework for quantum error correction, capable of correcting errors that drive a system from its ground-state subspace into excited-state sectors. The protocol consists of a joint time evolution of the system-auxiliary duo under a specially engineered interaction Hamiltonian, followed by a single measurement of the auxiliary in its energy eigenbasis and a subsequent post-selection of one of the measurement outcomes. We show that the resulting purified state always achieves unit fidelity, while the probability of obtaining any energy of the auxiliary other than its ground state energy yields the success rate of the protocol. We demonstrate the power of this proposed method for several low-distance quantum codes, including the three-, four-, and five-qubit codes, and for the one-dimensional isotropic Heisenberg model, subjected to bit-flip, phase-flip, and amplitude-damping noises acting on all qubits. Notably, the protocol expands the class of correctable errors for a given code, particularly in the presence of amplitude-damping noise. We further analyze the impact of replacing the auxiliary qudit with a single auxiliary qubit, and the changes in the performance of the protocol under the realistic scenario where noise remains active during the correction cycle.
We develop a measurement-based protocol for simultaneously purifying arbitrary logical states in multiple quantum error correcting codes with unit fidelity and finite probability, starting from arbitrary thermal states of each code. The protocol entails a time evolution caused by an engineered Hamiltonian, which results in transitions between the logical and error subspaces of the quantum error correcting code mediated by the auxiliary qubit, followed by a projective measurement in an optimum basis on the auxiliary qubit and an appropriate post-selection of the measurement outcomes. We illustrate the results with the three-qubit repetition code and the logical qubit used in quantum state transfer protocol. We further demonstrate that when the measurement base is not optimal, it is possible to achieve both classical fidelity, and fidelity as high as 90%90\%90% through several iterations of the purifying procedure, thereby establishing its robustness against variations in the measurement basis. By repeating the purification rounds, we show that purifying the cardinal states of the logical Bloch sphere corresponding to logical qubits in quantum state transfer is feasible utilizing paradigmatic quantum spin models as the generator of the time evolution.
Noise poses a fundamental challenge to quantum information processing, with amplitude-damping (AD) noise being particularly detrimental. Preserving high-fidelity quantum systems therefore relies critically on effective error correction and purification methods. In this work, we introduce a novel approach for mitigating AD noise that can be applied to both state and channel purification. Our method achieves a substantial enhancement in the fidelity of affected states or channels while maintaining a low resource overhead, requiring only one or two ancilla qubits in combination with two Clifford gates, and exhibits a relatively high success probability. This approach provides a practical and scalable framework for addressing AD noise in realistic quantum systems.
We study the effect of continuous quantum error correction in the case where each qubit in a codeword is subject to a general Hamiltonian interaction with an independent bath. We first consider the scheme in the case of a trivial single-qubit code, which provides useful insights into the workings of continuous error correction and the difference between Markovian and non-Markovian decoherence. We then study the model of a bit-flip code with each qubit coupled to an independent bath qubit and subject to continuous correction, and find its solution. We show that for sufficiently large error-correction rates, the encoded state approximately follows an evolution of the type of a single decohering qubit, but with an effectively decreased coupling constant. The factor by which the coupling constant is decreased scales quadratically with the error-correction rate. This is compared to the case of Markovian noise, where the decoherence rate is effectively decreased by a factor which scales only linearly with the rate of error correction. The quadratic enhancement depends on the existence of a Zeno regime in the Hamiltonian evolution which is absent in purely Markovian dynamics. We analyze the range of validity of this result and identify two relevant time scales. Finally, we extend the result to more general codes and argue that the performance of continuous error correction will exhibit the same qualitative characteristics.
Quantum error mitigation is a key approach for extracting target state properties on state-of-the-art noisy machines and early fault-tolerant devices. Using the ideas from flag fault tolerance and virtual state purification, we develop the virtual-channel-purification (VCP) protocol, which consumes similar qubit and gate resources as virtual state purification but offers stronger error suppression with increased system size and more noisy operation copies. The application of VCP does not require specific knowledge about the target quantum state, the target problem and the gate noise model in the target circuit, and can still offer rigorous performance guarantees for practical noise regimes as long as the noise is incoherent. Further connections are made between VCP and quantum error correction to produce the virtual error-correction (VEC) protocol, one of the first protocols that combine quantum error correction (QEC) and quantum error mitigation beyond directly applying error-mitigation protocols on top of logical qubits. Assuming perfect syndrome extraction, VEC can virtually remove all correctable noise in the channel while paying only the same sampling cost as low-order purification. It can achieve QEC-level protection on an unencoded register when transmitting it through a noisy channel, removing the associated encoding qubit overhead. Another variant of VEC can mimic the error-suppression power of the surface code by inputting only a bit-flip and a phase-flip code. Our protocol can also be adapted to key tasks in quantum networks like channel capacity activation and entanglement distribution.
Quantum error correction physically removes errors from a quantum state, while quantum error mitigation improves observable estimates by processing noisy measurement data. We introduce \emph{purification quantum error suppression} (PQES), a hybrid approach that uses multiple noisy copies of an unknown state to combine these two ideas. The protocol uses SWAP tests to physically reduce errors by purification, while the full outcome record is used to combine all branches without postselection. In this way, PQES avoids the fixed-success-outcome requirement of standard SWAP-test purification while still accessing the power-purified state ρNρ^NρN. The SWAP identities allow purification steps to be interleaved with unitary circuit blocks, so errors can be suppressed during a computation rather than only at the final measurement. We provide both a parallel binary-tree implementation and a more compact register-recycled implementation using O(Mℓ)O(M\ell)O(Mℓ) coherent data qubits for an MMM-qubit register and N=2ℓN=2^\ellN=2ℓ input copies. We analyze the resulting error thresholds under representative noise models. For local depolarizing noise on the product-state family studied here, the threshold is pth=3/4p_{\mathrm{th}}=3/4pth​=3/4 for any register size, while local dephasing of ∣+⟩⊗M|+\rangle^{\otimes M}∣+⟩⊗M has a threshold of pth=1/2p_{\mathrm{th}}=1/2pth​=1/2. Local Clifford twirling can be used to convert dephasing into a depolarization channel and restore the higher threshold.
We analyze the performance of a quantum error-correction code subject to physically motivated noise modeled by a Lindblad master equation. We consider dissipative and coherent single-qubit terms and two-qubit crosstalk, studying how different approximations of the noise capture the success rate of a code. Focusing on the five-qubit code and adapting it to partially correct two-qubit errors in relevant parameter regimes according to the noise model, we find that a composite-channel approximation where every noise term is considered separately captures the behavior in many physical cases up to long timescales, eventually failing due to the effect of noncommuting terms. In contrast, we find that single-qubit approximations do not properly capture the error-correction dynamics with two-qubit noise, even for short times. A Pauli approximation going beyond a single-qubit channel is sensitive to the details of the noise, state, and decoder and succeeds at short timescales relative to the noise strength, beyond which it fails. Furthermore, we point out a mechanism for a Pauli model failure where it underestimates the success rate of a code even with frequent syndrome projection and correction cycles. These results shed light on the performance of error correction in the presence of realistic noise and can advance the ongoing efforts towards useful quantum error correction.