Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2512.08402 · New Journal of Physics

A cold beam of BaOH molecules using a water-vapor seeded neon gas

Ties H. Fikkers, Nithesh Balasubramanian, Joost W. F. van Hofslot, Maarten C. Mooij, Hendrick L. Bethlem, Steven Hoekstra

Published Jan 21, 2026• 0 citations
arXivHTMLPDF

Abstract

Abstract In this paper we report on the production and characterization of a cold beam of BaOH molecules using a cryogenic buffer-gas beam source. BaOH is a highly suitable molecule for studies of the violation of fundamental symmetries, such as the search for the electron’s electric dipole moment. BaOH molecules are synthesized inside the cold source through laser ablation of a barium metal target while water vapor is seeded into the neon buffer gas. The BaOH flux is significantly enhanced (∼11 times) when laser-exciting the barium atoms inside the buffer-gas cell on the 1 S 0 – 3 P 1 transition. A similar enhancement has been reported for other alkaline-earth(-like) monohydroxides. For typical source conditions, the molecular beam has an average velocity of ≈ 180 m s −1 and an intensity of ∼ 10 9 molecules s −1 in N = 1, which is comparable to that of cryogenic BaF beams.

DOI
10.1088/1367-2630/ae3b66

Related papers

A general cold atomic and molecular beam source

Stephen Maxwell, Nathaniel Brahms, Robert deCarvalho +5 more

We demonstrate and characterize a high-flux beam source for cold, slow atoms or molecules. The desired species is vaporized using laser ablation, then cooled by thermalization in a cryogenic cell of buffer gas. The beam is formed by particles exiting a hole in the buffer gas cell. We characterize the properties of the beam (flux, forward velocity, temperature) for both an atom (Na) and a molecule (PbO) under varying buffer gas density, and discuss conditions for optimizing these beam parameters. Our source compares favorably to existing techniques of beam formation, for a variety of applications.

Bulletin of the American Physical Society•May 20, 2005•0 citations

Intense atomic and molecular beams via neon buffer-gas cooling

David Patterson, Julia Rasmussen, John M. Doyle

We realize a continuous, intense, cold molecular and atomic beam source based on buffer-gas cooling. Hot vapor (up to 600 K) from an oven is mixed with cold (15 K) neon buffer gas, and then emitted into a high-flux beam. The novel use of cold neon as a buffer gas produces a forward velocity distribution and low-energy tail that is comparable to much colder helium-based sources. We expect this source to be trivially generalizable to a very wide range of atomic and molecular species with significant vapor pressure below 1000 K. The source has properties that make it a good starting point for laser cooling of molecules or atoms, cold collision studies, trapping, or nonlinear optics in buffer-gas-cooled atomic or molecular gases. A continuous guided beam of cold deuterated ammonia with a flux of 3 × 10 11 ND 3 molecules s −1 and a continuous free-space beam of cold potassium with a flux of 1 × 10 16 K atoms s −1 are realized.

arXiv:0812.2212•New Journal of Physics•May 14, 2009•82 citations

High-Flux Beam Source for Cold, Slow Atoms or Molecules

Stephen Maxwell, Nathan Brahms, Robert deCarvalho +7 more

We demonstrate and characterize a high-flux beam source for cold, slow atoms or molecules. The desired species is vaporized using laser ablation, then cooled by thermalization in a cryogenic cell of buffer gas. The beam is formed by particles exiting a hole in the buffer gas cell. We characterize the properties of the beam (flux, forward velocity, temperature) for both an atom (Na) and a molecule (PbO) under varying buffer gas density, and discuss conditions for optimizing these beam parameters. Our source compares favorably to existing techniques of beam formation, for a variety of applications.

arXiv:physics/0508100•Physical Review Letters•Oct 17, 2005•188 citations

Chemistry in a Cryogenic Buffer Gas Cell

Qi Sun, Jinyu Dai, Rian Koots +4 more

Cryogenic buffer gas sources are ubiquitous for producing cold, collimated molecular beams for quantum science, chemistry, and precision measurements. The molecules are typically produced by laser ablating a metal target in the presence of a donor gas. The radical of interest emerges due to a barrier-free reaction or under thermal or optical excitation. High-barrier reactions, such as between Ca and H 2, should be precluded. We study chemical reactions between Ca and three hydrogen isotopologues (H 2, D 2, and HD) in a cryogenic cell with helium buffer gas. We observe that H 2 can serve as both a reactant and a buffer gas, outperforming D 2 and HD. We use a reaction network model to describe the chemical dynamics and find that the enhanced molecular yield can be attributed to rapid vibrational excitations of the reactant gas. Our results demonstrate a robust method for generating bright cold beams of alkaline-earth-metal hydrides for laser cooling and trapping.

arXiv:2501.05613•The Journal of Physical Chemistry Letters•Dec 26, 2025•3 citations

Slow molecular beams from a cryogenic buffer gas source

A. D. White, S. Popa, Jorge Mellado Muñoz +4 more

We study the properties of a cryogenic buffer gas source that uses a low-temperature two-stage buffer gas cell to produce very slow beams of ytterbium monofluoride molecules. The molecules are produced by laser ablation inside the cell and extracted into a beam by a flow of cold helium. We measure the flux and velocity distribution of the beam as a function of ablation energy, helium flow rate, cell temperature, and the size of the gap between the first and second stages of the cell. We also compare the velocity distributions from one-stage and two-stage cells. The one-stage cell emits a beam with a speed of about 82 m s − 1 and a translational temperature of 0.63 K. The slowest beams are obtained using the two-stage cell at the lowest achievable cell temperature of 1.8 K. This beam has a peak velocity of 56 m s − 1 and a flux of 9 × 10 9 ground-state molecules per steradian per pulse, with a substantial fraction at speeds below 40 m s − 1 . These slow molecules can be decelerated further by radiation pressure slowing and then captured in a magneto-optical trap. Published by the American Physical Society 2024

arXiv:2408.01862•Physical Review Research•Dec 3, 2024•11 citations

Buffer gas cooling of YbF molecules

Sarah M. Skoff

This thesis reports on the production and characterisation of the first slow and cold beam of YbF molecules using buffer gas cooling. These molecules are being used to measure the electron’s electric dipole moment, and an intense source of slow-moving molecules is desirable for this experiment. The molecules are loaded into a buffer gas cell via laser ablation where they thermalise with cold helium buffer gas. They are then detected inside the cell using laser absorption imaging and spectroscopy on the X2Σ+→A2II1/2 transition. The formation, diffusion and thermalisation dynamics of the molecules inside the cell are studied. Measurements of laser absorption versus intensity reveal that saturation of the absorption is due to a competition between optical pumping into dark states and repopulation of the addressed level by inelastic and velocity-changing collisions. A beam of YbF molecules is extracted through an aperture in the buffer gas cell and characterised using laser induced fluorescence detection. Peak fluxes of 1010 molecules per steradian per pulse, in the rotational and vibrational ground state, are obtained. The translational and rotational temperatures are in equilibrium with the cell temperature of 4 K. The forward velocity of the pulses can be varied between 130 m/s and 200 m/s by changing the buffer gas pressure. This source is an order of magnitude brighter and more than three times slower than a supersonic source of YbF molecules and provides an excellent starting point for improving the measurement of the electron’s electric dipole moment and for deceleration and trapping experiments. In order to reduce the helium load on the vacuum system and to shorten the molecular pulses, a second set-up, delivering the buffer gas into an open copper cylinder in pulses rather than in a continuous flow,is characterised and shows promising first results.

•Sep 1, 2011•2 citations
Abstract In this paper we report on the production and characterization of a cold beam of BaOH molecules using a cryogenic buffer-gas beam source. BaOH is a highly suitable molecule for studies of the violation of fundamental symmetries, such as the search for the electron’s electric dipole moment. BaOH molecules are synthesized inside the cold source through laser ablation of a barium metal target while water vapor is seeded into the neon buffer gas. The BaOH flux is significantly enhanced (∼11 times) when laser-exciting the barium atoms inside the buffer-gas cell on the 1 S 0 – 3 P 1 transition. A similar enhancement has been reported for other alkaline-earth(-like) monohydroxides. For typical source conditions, the molecular beam has an average velocity of ≈ 180 m s −1 and an intensity of ∼ 10 9 molecules s −1 in N = 1, which is comparable to that of cryogenic BaF beams.
We demonstrate and characterize a high-flux beam source for cold, slow atoms or molecules. The desired species is vaporized using laser ablation, then cooled by thermalization in a cryogenic cell of buffer gas. The beam is formed by particles exiting a hole in the buffer gas cell. We characterize the properties of the beam (flux, forward velocity, temperature) for both an atom (Na) and a molecule (PbO) under varying buffer gas density, and discuss conditions for optimizing these beam parameters. Our source compares favorably to existing techniques of beam formation, for a variety of applications.
We realize a continuous, intense, cold molecular and atomic beam source based on buffer-gas cooling. Hot vapor (up to 600 K) from an oven is mixed with cold (15 K) neon buffer gas, and then emitted into a high-flux beam. The novel use of cold neon as a buffer gas produces a forward velocity distribution and low-energy tail that is comparable to much colder helium-based sources. We expect this source to be trivially generalizable to a very wide range of atomic and molecular species with significant vapor pressure below 1000 K. The source has properties that make it a good starting point for laser cooling of molecules or atoms, cold collision studies, trapping, or nonlinear optics in buffer-gas-cooled atomic or molecular gases. A continuous guided beam of cold deuterated ammonia with a flux of 3 × 10 11 ND 3 molecules s −1 and a continuous free-space beam of cold potassium with a flux of 1 × 10 16 K atoms s −1 are realized.
We demonstrate and characterize a high-flux beam source for cold, slow atoms or molecules. The desired species is vaporized using laser ablation, then cooled by thermalization in a cryogenic cell of buffer gas. The beam is formed by particles exiting a hole in the buffer gas cell. We characterize the properties of the beam (flux, forward velocity, temperature) for both an atom (Na) and a molecule (PbO) under varying buffer gas density, and discuss conditions for optimizing these beam parameters. Our source compares favorably to existing techniques of beam formation, for a variety of applications.
Cryogenic buffer gas sources are ubiquitous for producing cold, collimated molecular beams for quantum science, chemistry, and precision measurements. The molecules are typically produced by laser ablating a metal target in the presence of a donor gas. The radical of interest emerges due to a barrier-free reaction or under thermal or optical excitation. High-barrier reactions, such as between Ca and H 2, should be precluded. We study chemical reactions between Ca and three hydrogen isotopologues (H 2, D 2, and HD) in a cryogenic cell with helium buffer gas. We observe that H 2 can serve as both a reactant and a buffer gas, outperforming D 2 and HD. We use a reaction network model to describe the chemical dynamics and find that the enhanced molecular yield can be attributed to rapid vibrational excitations of the reactant gas. Our results demonstrate a robust method for generating bright cold beams of alkaline-earth-metal hydrides for laser cooling and trapping.
We study the properties of a cryogenic buffer gas source that uses a low-temperature two-stage buffer gas cell to produce very slow beams of ytterbium monofluoride molecules. The molecules are produced by laser ablation inside the cell and extracted into a beam by a flow of cold helium. We measure the flux and velocity distribution of the beam as a function of ablation energy, helium flow rate, cell temperature, and the size of the gap between the first and second stages of the cell. We also compare the velocity distributions from one-stage and two-stage cells. The one-stage cell emits a beam with a speed of about 82 m s − 1 and a translational temperature of 0.63 K. The slowest beams are obtained using the two-stage cell at the lowest achievable cell temperature of 1.8 K. This beam has a peak velocity of 56 m s − 1 and a flux of 9 × 10 9 ground-state molecules per steradian per pulse, with a substantial fraction at speeds below 40 m s − 1 . These slow molecules can be decelerated further by radiation pressure slowing and then captured in a magneto-optical trap. Published by the American Physical Society 2024
This thesis reports on the production and characterisation of the first slow and cold beam of YbF molecules using buffer gas cooling. These molecules are being used to measure the electron’s electric dipole moment, and an intense source of slow-moving molecules is desirable for this experiment. The molecules are loaded into a buffer gas cell via laser ablation where they thermalise with cold helium buffer gas. They are then detected inside the cell using laser absorption imaging and spectroscopy on the X2Σ+→A2II1/2 transition. The formation, diffusion and thermalisation dynamics of the molecules inside the cell are studied. Measurements of laser absorption versus intensity reveal that saturation of the absorption is due to a competition between optical pumping into dark states and repopulation of the addressed level by inelastic and velocity-changing collisions. A beam of YbF molecules is extracted through an aperture in the buffer gas cell and characterised using laser induced fluorescence detection. Peak fluxes of 1010 molecules per steradian per pulse, in the rotational and vibrational ground state, are obtained. The translational and rotational temperatures are in equilibrium with the cell temperature of 4 K. The forward velocity of the pulses can be varied between 130 m/s and 200 m/s by changing the buffer gas pressure. This source is an order of magnitude brighter and more than three times slower than a supersonic source of YbF molecules and provides an excellent starting point for improving the measurement of the electron’s electric dipole moment and for deceleration and trapping experiments. In order to reduce the helium load on the vacuum system and to shorten the molecular pulses, a second set-up, delivering the buffer gas into an open copper cylinder in pulses rather than in a continuous flow,is characterised and shows promising first results.