To date, most integrated quantum photonics experiments rely on single-photon detectors operating at cryogenic temperatures coupled to photonic integrated circuits (PICs) through single-mode optical fibers. This approach presents significant challenges due to the detection complexity, as cryogenic conditions hinder the development of scalable systems. In addition, going towards fully-integrated devices or, at least, removing the optical fibers would be also advantageous to develop compact and cost-efficient solutions featuring a high number of optical modes. This work reports on the direct coupling of a PIC, fabricated by femtosecond laser writing (FLW), and a silicon single-photon avalanche diode (SPAD) array, fabricated in a custom planar technology and compatible with the operation at room temperature. The effectiveness of this solution is shown by achieving perfect coupling and a system detection efficiency as high as 41.0% at a wavelength of 561 nm, which is the highest value reported to date among both heterogeneous/hybrid integrated and directly coupled systems. We also show the robustness of the coupling to misalignments, demonstrating that costly alignment procedures are not needed. Finally, we exploit the SPAD array to characterize a reconfigurable Mach-Zehnder interferometer, i.e., the basic building block of multimode reconfigurable PICs. This solution provides a new avenue to the design and implementation of quantum photonics experiments, especially effective when compact and cost-efficient systems are needed.
To date, most integrated quantum photonics experiments rely on single-photon detectors operating at cryogenic temperatures coupled to photonic integrated circuits (PICs) through single-mode optical fibers. This approach presents significant challenges due to the detection complexity, as cryogenic conditions hinder the development of scalable systems. In addition, going towards fully-integrated devices or, at least, removing the optical fibers would be also advantageous to develop compact and cost-efficient solutions featuring a high number of optical modes. This work reports on the direct coupling of a PIC, fabricated by femtosecond laser writing (FLW), and a silicon single-photon avalanche diode (SPAD) array, fabricated in a custom planar technology and compatible with the operation at room temperature. The effectiveness of this solution is shown by achieving perfect coupling and a system detection efficiency as high as 41.0% at a wavelength of 561 nm, which is the highest value reported to date among both heterogeneous/hybrid integrated and directly coupled systems. We also show the robustness of the coupling to misalignments, demonstrating that costly alignment procedures are not needed. Finally, we exploit the SPAD array to characterize a reconfigurable Mach-Zehnder interferometer, i.e., the basic building block of multimode reconfigurable PICs. This solution provides a new avenue to the design and implementation of quantum photonics experiments, especially effective when compact and cost-efficient systems are needed.
The importance of integrated quantum photonics in the telecom band is based on the possibility of interfacing with the optical network infrastructure that was developed for classical communications. In this framework, femtosecond laser-written integrated photonic circuits, which have already been assessed for use in quantum information experiments in the 800-nm wavelength range, have great potential. In fact, these circuits, being written in glass, can be perfectly mode-matched at telecom wavelength to the in/out coupling fibers, which is a key requirement for a low-loss processing node in future quantum optical networks. In addition, for several applications, quantum photonic devices must be dynamically reconfigurable. Here, we experimentally demonstrate the high performance of femtosecond laser-written photonic circuits for use in quantum experiments in the telecom band, and we demonstrate the use of thermal shifters, which were also fabricated using the same femtosecond laser, to accurately tune such circuits. State-of-the-art manipulation of single- and two-photon states is demonstrated, with fringe visibilities greater than 95%. The results of this work open the way to the realization of reconfigurable quantum photonic circuits based on this technological platform. An integrated quantum photonic circuit that can be thermally reconfigured has been fabricated by femtosecond laser micromachining. Thermally reconfigurable quantum photonic circuits would permit quantum protocols to be implemented that require dynamically changing circuit functionality. A team in Italy has used femtosecond laser micromachining to inscribe waveguide Mach–Zehnder interferometers that operate at telecommunication wavelengths on a glass chip and also to pattern gold resistive heaters on the chip surface, which can be used to accurately tune the circuit. The researchers demonstrated high-quality manipulation of single- and two-photon states with fringe visibilities exceeding 95%. They also fully characterized the thermal response of the interferometric circuit and found good agreement with that expected based on the fabrication design. This device could potentially be used as a building block for reconfigurable quantum circuits.
Recent advancements in active reconfigurable photonic devices have spurred interest in quantum information applications, ranging from computation to communications and sensing. Universal photonic processors (UPPs) play a crucial role in this domain, enabling the implementation of arbitrary unitary transformations on input photonic states. Common architectures for UPPs involve intricate interferometric meshes, with the reconfigurable Mach-Zehnder interferometer (MZI) as the fundamental building block. In this work, we present the realization of an 8-mode UPP using direct femtosecond laser writing (FLW) as the fabrication platform. FLW allows rapid and cost-effective prototyping of waveguides in glass-based substrates, achieving low insertion losses (down to 0.13 dB cm−1 for propagation and 0.2 dB per facet for coupling), a critical requirement for quantum applications. By incorporating compact curved deep isolation trenches and stable, efficient thermal phase shifters, we have reduced the size of the MZI unit cell compared to the current state-of-the-art in FLW fabrication. This reduction improves integration density and circuit complexity with respect to the current state-of-the-art devices for this fabrication platform. The phase shifters exhibit minimal power dissipation (∼ 38mW) and thermal crosstalk (∼ 20 %). The device operates at a wavelength of 925 nm, making it compatible with state-of-the-art quantum dot single-photon sources. It features 28 MZIs and 56 thermal phase shifters, with total insertion losses below 3 dB. Additionally, we describe a calibration process combining conventional methods with a machine learning optimization procedure, enabling the realization of unitary transformations with an average amplitude fidelity surpassing 0.99, showcasing the high precision required for quantum photonic applications.
Photonic integrated circuits (PICs) are a technology with a growing interest in a wide range of applications in quantum information, from computation to communications and sensing. Amongst the various types of PICs, universal quantum photonic processors (UQPPs) are programmable photonic integrated circuits on which any arbitrary unitary transformation can be implemented on a given input quantum photonic state, sometimes also referred to as quantum photonic FPGAs. Various kinds of UQPPs have been reported, mostly with a reconfigurable Mach-Zehnder interferometer (MZI) as building block, in photonic platforms ranging from silicon nitride to glass-based direct laser writing. Among them, femtosecond laser writing (FLW) is a versatile fabrication technique that allows for cost-effective fabrication of waveguides in glass substrates with low insertion losses (down to 0.1 dB cm−1 for the propagation and 0.2 dB per facet for the coupling) over a wide wavelength range, a key requirement for quantum applications. Moreover, FLW allows for the fabrication of microstructures in the substrate such as trenches, which can act as thermal isolation structures that significantly reduce the power dissipation of thermal phase shifters and their thermal crosstalk. In this work, firstly we present the fabrication of a 6-mode FLW-UQPP in a rectangular MZI mesh layout operating at 785 nm with average amplitude fidelity as high as 0.9963 when implementing switching unitaries and 0.9979 when implementing Haar random unitaries. Secondly, we demonstrate the versatility of the FLW platform by fabricating another 6-mode UQPP with waveguides optimized for operation at 1550 nm wavelength, with similar performance, on which we repeated the implementation of Haar random unitaries with 0.9969 average amplitude fidelity.
Reprogrammable integrated optics provides a natural platform for tunable quantum photonic circuits, but faces challenges when high dimensions and high connectivity are involved. Here, we implement high-dimensional linear transformations on spatial modes of photons using wavefront shaping together with mode mixing in a multimode fiber, and measure photon correlations using a time-tagging single-photon avalanche diode (SPAD) array. Our demonstration of a generalization of a Hong-Ou-Mandel interference to 22 output ports shows the scalability potential of wavefront shaping in complex media in conjunction with SPAD arrays for implementing high-dimensional reconfigurable quantum circuits. Specifically, we achieved (80.5±6.8)% similarity for indistinguishable photon pairs and (84.9±7.0)% similarity for distinguishable photon pairs using 22 detectors and random circuits.
Photonic integration is a promising route to miniaturise the hardware of quantum key distribution (QKD), yet the monolithic integration of single-photon detectors remains a significant challenge. QKD receiver chips integrating superconducting detectors have been demonstrated, but their requirement for cryogenic cooling restricts their practical applications. High-frequency gated single-photon avalanche diodes (SPADs) provide a mature non-cryogenic alternative, and their fabrication into compact arrays would enable scalable hybrid integration. However, this faces several challenges related to efficient GHz array gating, inter-pixel crosstalk, and scalable waveguide coupling, which to date remain unaddressed. Here, we overcome the key challenges and develop GHz-gated InGaAs/InP SPAD arrays with performance viable for QKD and negligible inter-pixel crosstalk. We combine the arrays with low-loss silica waveguide chips to produce compact hybrid QKD receivers and perform BB84 protocol experiments, achieving secure key rates over 2 Mbps at short distances and 15 kbps over 100 km of fibre. Our work provides a method for flexible and scalable integration of waveguide-coupled SPADs for quantum information processing applications.
The implementation of quantum information technologies requires the development of integrated quantum chips. Femtosecond laser direct writing (FLDW) waveguides and superconducting nanowire single-photon detectors (SNSPDs) have been widely applied in integrated quantum photonic circuits. In this work, a novel FLDW waveguide-coupled SNSPD was designed and realized by integrating FLDW waveguides and conventional SNSPDs together. Through a COMSOL simulation, a waveguide end face-nanowire optical coupling structure was designed and verified. The simulation results showed that the FLDW waveguide-coupled SNSPD device, which had a target wavelength of 780 nm, can achieve 87% optical absorption. Then the preparation process of the FLDW waveguide-coupled SNSPD device was developed, and the fabricated device achieved a system detection efficiency of 1.7% at 10 Hz dark count rate. Overall, this method provides a feasible single-photon detector solution for future on-chip integrated quantum photonic experiments and applications.